Starbucks next to the alarm clock

Similar Questions

• The alarm will work even if my phone is turned off?

  I was wondering if the alarm on Apple Watch still works even if the phone is off or out of range.

  Hello

  If you set an alarm with the alarm application on your watch, it will work even if the iPhone is disconnected (even when it is out of range or turned off).

  To set an alarm on your watch, go to the home screen (via a simple press on the digital Crown) and press the alarm clock app icon.

• Alarm clock problem

  If there is a problem with the alarm clock since 4.4.4 updated and it's still in 5.0.2. When I try to clangw, sound alarm clocks it opens Commander file stock not his! 4.4.4 usually after phone restart everything has worked for awhile, but now in 5.0.2 is not fixing problem. Any ideas how can I get in stock clocks sounds? Or mount it at all?

  You could erase the default values for applications in the settings-applications-all.

• BlackBerry Smartphones clock icon next to the battery icon.

  I just noticed a "clock icon" next to the battery icon. I don't know what it is and how to remove it.

  Would be grateful for the help.

  THX

  It is a set of alarm or alarm schedule configured on your device.

• How long the alarm does not sound on clock iPad app?

  Hello

  I use my iPad clock app, and I was wondering how long the alarm sounds for if I don't stop it manually.

  Also, is there a way to set his time limit?

  Thank you

  Chris.

  Based on the few times wherever I slept too long by ten to thirty minutes, I think it rings less than thirty minutes and more than five minutes.

  Good day.

• BlackBerry Smartphones Can I put an alarm clock without having it show in the calendar?

  When I put an alarm clock, it appears as a daily entry in my BB calendar, which remains even when I turn off the alarm.  I'm not - I just need one-time alarms.  Is there a way to simply set an alarm and * not * include a calendar entry?  If not, does anyone know of a program that makes it easy (I like it, how it is easy for the clock this)?

  You can do it.  Calendar, (menus), General Options. Scroll to the right.  See it alarms the value no.

  Do not hesitate to distribute laurels and mark this one resolved if this hits the spot for you.

• Treo 500 has 2 alarm clocks at the same time

  I recently bought a Treo 500, it took a lot of time to get sys active work well with our business network and I have installed the patch for daylight savings. But for some reason when my alarm goes off in the morning. There are a 2 alarms both playing the same tone, slightly out of sync. How to resolve that there is only 1 alarm setting which is fixed at the same time on weekdays only. Any ideas?

  Thanks for the advice, the DST patch was done before I put the awakening not sure if that has had an effect. I have reset the alarm so that it was 7 days a week and changed the time. Then assign the week at the usual time and it worked very well.

• Enhancement request: Show time up alarm clock App

  I wish that it y comments given in the iOS clock app after setting or activate an alarm that would show the time until the alarm triggers. This helps to ensure the accuracy of the alarm and prevents the user to make the faults of AM/PM when you set an alarm.

  For example, is it is 20:00 and I accidentally put a clock from 19:00 tomorrow instead of 07:00, I wish the application would give comments indicating that the alarm goes off in 23 hours instead of 11 hours I intended when the alarm setting.

  You can say Apple on the link below.

  http://www.Apple.com/feedback/iPhone.html

• Palm alarms of the GER. It will trigger the alarm even if the ringer volume is silent?

  I just upgraded to Palm Pre.

  I work in an office environment in which we have our rings off, which usually means the week of work my ringer is off and I just have on vibrate so I can feel it in my pocket when a call or text comes in.

  With previous phones if you set the alarm, the alarm would still off and make it sound, even if the ringer is turned downwards.

  PRE alarm will always be sound or I'm going to increase the volume of the ringtone to the top every night before I go to bed?  My charger is my bed so hung up that the charger is not a problem.

  Yes always audible alarm if the mute button is on mute, unless the settings in the preferences of the "clock" is not to do so. Open the app clock, the menu drop-down, select Preferences, there is a new option added in one of the latest improvements. 'Ringer turn off' > 'Play the alarm even when' > 'YES '.

• Lightning 30-pin adapter: it'll work on the Sony clock radio?

  My 4th gen iPod touch battery is almost dead. It can't hold a charge for very long. It's too bad that I can't replace the battery.

  My only option is to get a new one, I guess or plugged Dungeon that it connected to my Radio - alarm clock Sony until the battery is so bad that he can't even work with it.

  I went to the store Apple Genius and none of the children he could tell me if the adapter brightening work audio playback when connected. There is a warning on the Apple site that work with the adapter not all connection devices 30 pins.  The other concern is that one of the applications is made by Sony and that allows me to control the settings of the clock radio as well.

  Does anyone know if lightning 30-pin adapter works on these clocks?

  Some docks work with the adopter and some do not.

  Have you went to the Sony support site?

  Googling revealed:

  ple-iphone-and-ipod-dock-questions-answe http://reviews.BestBuy.com/answers/3545/product/9773885/Sony-clock-radio-with-AP...

  ANSWER 2

  The ICFC05IPBLK is Compatible with iPod® touch, iPod Nano 3rd generation, iPod classic, iPod Nano 2nd generation, iPod 5th generation, iPod Nano 1st generation and 5th generation, iPod 4th generation, iPod mini. With regard to connections using the lightning of Apple 30-pin adapter / lightning 30-pin adapter (0.2 m): due to the instability of the connection of the models of iPod and iPhone to our speaker system using the lightning of Apple 30-pin adapter / lightning 30-pin adapter (0.2 m), there is a possibility that one or the two dock connectors may be damaged. Sony does not recommend using Apple Lightning 30-pin adapter / lightning 30-pin adapter (0.2 m) with the Sony speaker dock with connector 30 pins.

  • 

  After the foregoing it seems the adopter functionally works but the adopter call will focus on the conn3ctors and damage it.

  There is a to adopt with a cable and that should work and avoid this damage, but the iPod will be on the table at radio Vice

• clock alarm clock in pre 3 allows only 1 ringtone

  Hello
  my clock is normally dozens alarm in pre 2. Every 15 minutes from 05:00 to 19:00. Together with your old phone and alarm fullvolume alarm and I have everything that I need very quickly.
  
  However you just bought a pre 3 and she is transferred to my pre and found that there is only one available sound despite the name of the alarm, it actually plays your pre. No other option re there.
  
  is there only one ring also for phone.

  I had to reinstall my proofile and then worked. something was wrong when upgrading pre pre 3, which means that a single type of ringtone

• My battery percentage is not accurate, I will let it charge all night, I wake up and it's on 80 so so I cut my phone to make it precise. Also my alarm clocks do not go to sea, and it's starting to be a problem.

  I need a solution to my battery unaccurate percentage and help with my alarm clocks that they leave mounting

  Hi there alara11,

  It seems that your phone battery does not charge, and your alarms do not seem to jump when you value. We should be able to solve that with troubleshooting software, so I would like to start by leaving the clock app and the settings:

  Force an app to close the iOS
  https://support.Apple.com/en-us/HT201330

  1. press the Home button twice quickly. You will see small glimpses of your applications recently used.
  2. slide to the left to find the application you want to close.
  3. push upward on the overview of the application to close.

  When you did this force restart the unit with the Home and Sleep/Wake buttons as described in the following article and test questions again:

  iOS: switch off and on (restart) and reset
  http://support.Apple.com/en-us/HT201559
   
  I don't think that, but if the problem persists, save your device in iTunes, then restore it like new and verify that it works.
   
  How to clear your iOS device and then set up as a new device or restore from backups
  https://support.Apple.com/en-us/HT204686

  If this is the case, restore your backup either check it still works and just reinstalled software or circumvent the problem in the backup file itself. Thank you for using communities of Apple Support, let us know how it goes!

• How can I add the weather icon to the taskbar to be next to the time?

  Try as I might, I can't figure this out.  I would like to add the weather icon to the taskbar.  I want it to be next to the time, so it is always displayed.  How can I do this?  I also want to remove some of the icons that appear in the part of the notification of the taskbar.  Yet once, I can't do it.

  To add items to the taskbar in Windows XP, do one click right, choose Properties, select "Show quick launch", then OK. Now you can add existing shortcuts to the quick launch area (which is pretty much a location allows you to customize your own shortcuts), or you can right click on the quick launch are to open its 'file', then create new shortcuts to here (right click-> new-> shortcut).

  To remove the part of the taskbar notification icons: If you are indeed referring to the notification area near the clock, try right-clicking on the icon and look for an option to delete/remove/disable. Not all icons will have such an option. Additional details on the notification in Windows XP bar can be found here. If you are actually referring to quick launch (next), and then activate it as I've described in the paragraph above, then you should be able with the right button and then remove them.

• Change the default clock ringtone

  I was curious, if there is a way to use a song from my music library as my alarm clock sound instead of using the default sounds?

  Thank you

  Locke2016

  Choose the song you want to use and press. you will get a menu, one of them said was use as phone ringtone select it. Yu not to use as main ringtone. Once you have selected it go in when you wake up and look at the choices you have and the song should be there. I personally use bad to the BONE by george thorogood.

• E280/radio-alarm clock/dock problem FIXED!

  (Not that anyone else in the world probably will never have that problem... ;->)

  But in case someone ever does it, here is the solution.

  ************************

  Reminder of the problem:

  Sansa and Timex clock radio play together well

  http://forums.SanDisk.com/Sansa/board/message?board.ID=E200&thread.ID=29319&view=by_date_ascending&page=1

  OK, I officially * had * it! (e280, clock radio and now dock)

  http://forums.SanDisk.com/Sansa/board/message?board.ID=E200&message.ID=30169#M30169

  ******************

  After communication with Sandisk (they * will keep talking about you, I'll give you em that...!), received suggestiion put in MTP mode and rename the folder 'Rhapsody' folder 'Services', if such were present.  Computer would only remove, so I again asked if the deletion was OK and if having a folder 'Rhapsody', it turns the e280 thought I had or used to have a Rhapsody subscription.  Positive on these two points, so I deleted the folder.  Problem solved.  Fix five minutes, including waiting for the computer to start...

  Follows my email to Sandisk.  (It's * my * e-mail, so I figure that I can copy it anywhere I want and he said what I have to say about the problem... ;->))

  *****************

  'Rhapsody' folder deleted. Unit works now fine with Sansa docking station and radio alarm clock.

  Wish that someone had told me about this simple correction much earlier. (Like $500 earlier!) My husband and I love all the e280s and the docks and wake-scattered, in fact, and I guess we'll get our money out of them before die us, but what I originally wanted was to get the first e280 to work with radio-alarm clock, as it did before the problem started.

  I * could * have waited until the initial problem has been fixed (possibly) instead of going on a buying frenzy, but I was afraid that if one) I waited and b) the problem has never been resolved, I would not be able to get another e280/clock radio, since the e200 series had been replaced by a new range of products.

  Suggestions for Sandisk:

  Format should mean FORMAT! I don't know if I find more amazing than the left repeated formats this Rhapsody folder in place or that it took so much communication with you all luck to someone who knew that. It's not as if I did not mention Rhapsody first - due to my chance to see only fleeting message when the problem started, it was the * first * possibility I mentioned, I think.

  It's also a problem the Amazon, DRM-free tracks somehow did it think that I had an expired subscription to Rhapsody, when I've never been and won't be anywhere * near * Rhapsody! (Especially after this experience!)

  It would be nice if everything was at least * visible * in MSC mode - I didn't on this issue because it does not appear in the mode I use! If I * saw * it in MSC mode, I tried the suggested fix original (rename) on mine!

  It would also be nice if your future mp3 players were more like the e200 series. I'm not terribly unhappy to have a bunch of e280s (well good, except for the money...), because I think they make your current line look sick.

  IMHO, FWIW... ;->

  And thanks to at least talk to me until the issue is resolved (if any) - I'll say that for Sandisk!

  You answer to me so that I can mark this FIXED!