Starling - start several times, workflow?

Similar Questions

• Interrupted SQL statement and start several times with several SQL_EXEC_ID

  Hi all

  We meet a strange phenomenon, maybe someone can help.

  We see that sometimes, when our client runs a single statement, implemented Oracle to process the statement with a special SQL_EXEC_ID, but after a while stops and starts processing the statement along with different SQL_EXEC_ID. Then, after a while, it happens again - stop Oracle processes the statement and start from the beginning with the new SQL_EXEC_ID. This happens again and again until we kill all of the other sessions on the database (then it ends).

  What we see exactly: Client executes the statement (sql_id = "2tp7pz6yv87qp"). Monitor us v $ SQL_MONITOR and get this:

  SELECT Sql_id, sql_exec_id, to_char (SQL_EXEC_START, "HH24:MI:SS MON-DD-YYYY) SQL_EXEC_START, status OF V$ SQL_MONITOR where sql_id = '2tp7pz6yv87qp' ORDER BY SQL_EXEC_START DESC;

  2tp7pz6yv87qp 16777216 28 may 2015 07:19:14 the EXECUTION

  After a while check us again and see this:

  2tp7pz6yv87qp 16777217 28 may 2015 07:36:17 the EXECUTION

  2tp7pz6yv87qp 16777216 28 may 2015 07:19:14 FACT

  After a while, we see this:

  2tp7pz6yv87qp 16777219 28 may 2015 08:09:58 the EXECUTION

  2tp7pz6yv87qp 16777218 28 may 2015 07:53:37 FACT

  2tp7pz6yv87qp 16777217 28 may 2015 07:36:17 FACT

  2tp7pz6yv87qp 16777216 28 may 2015 07:19:14 FACT

  and so on — will happen again and again until we kill all of the other sessions in the database.

  When comparing the follow-up of the different SQL_EXEC_IDs SQL reports, we see that each of them did exactly the same job: used the same execution plan, beginning treatment she even read/wrote the same amount of e/s and each of them stopped at the same point during execution. You can see that for each SQL_EXEC_ID execution 'stops' in the middle and never reach the end of the plan. She always stops in the JOIN by HASH and never continue to the next steps in the implementation plan.

  When you look more deeply, we see in V$ ACTIVE_SESSION_HISTORY always last thing that happens for every SQL_EXEC_ID is HASH JOIN RIGHT OUTER (SQL_PLAN_OPERATION = HASH and SQL_PLAN_OPTIONS = RIGHT OUTER JOIN). Then comes the new SQL_EXEC_ID and it starts to do the same thing as the previous SQL_EXEC_ID did when it was launched.

  Kill all other sessions, run finally ends. We see that the final (successful) SQL_EXEC_ID work and completes his plan to run to completion.

  When executing the same single statement (when it comes to the single session in the database), it ends with a single SQL_EXEC_ID. Its SQL monitoring report looks like the final execution when the phenomenon occurs after killing all other sessions.

  -We checked that the customer executing the query only once. AWR also only shows simple execution of the query.

  -We have reproduced in many different clients (plus SQL, JDBC thin client OIC and DBMS_SCHEDULER job).

  -It has no PARALLEL in the query or table.

  -In this case for different statements (different INSERT-SELECT and MERGE instructions).

  -Version: Oracle Database 11 g Enterprise Edition Release 11.2.0.3.0 - 64 bit Production

  Does anyone have an idea?

  Finally found the root cause of the problem.

  This phenomenon occurs when the cursor of the active query being invalidated. This can occur in several scenarios, in our case, what happens when we work on a single partition (read or write) and perform DDL operations on different partitions of the same or the tables.

  Steps to reproduce:

  1 launch long command DML that affect the single partition

  2. in the course of executing this SQL, do one of the following values in a session different all 1 minute:

  2.1 do the indexes to a different partition unusable: ALTER TABLE X EDIT PARTITION Y UNUSABLE LOCAL INDEX

  2.2 rebuild the unusable index of different partition: ALTER TABLE X EDIT PARTITION Y REBUILD UNUSABLE LOCAL INDEX

  2.3 a partition different truncate

  Support of Oracle we were told that this problem is known and there are several requests for bugs and improvements thereon, for example this one:

  Bug 12905327 : TRUNCATE to an INVALID PARTITION TABLE UNNECESSARILY IMMEDIATELY all THE SLIDERS

  In our case (ETL process), we used to perform all these operations DDL and DML operations long (we work on different partitions in parallel). In order to solve, we have separated these operations to the different phases in our process and don't be DDL and DML operations at the same time more. This solved the problem for us.

• After a delayed start, several times I get the error message: "the server does not currently. Have you tried regular recommendations.

  I bought InDesign. > I downloaded the exe for CreativeCloud
  When I double click on this file > it takes time to start and then the progress bar stops after about 2-3 seconds >
  It then shows error I menitoned > gives me the opportunity to start or cancel > does not.
  I'm on a corporate network I guess. Educational institution

  Windows10
  
  

  Cloud of InDesign, or serial CS6?

  If CS6, try this Windows 10 Forums

  Please read https://forums.adobe.com/thread/1499014

  -try some steps such as changing browsers and disable your firewall

  -also clear the cache of your browser if you start with a fresh browser

  -check the file hosts for blocked entries https://forums.adobe.com/thread/1912777

  http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip.

  https://helpx.Adobe.com/creative-cloud/KB/creative-cloud-desktop-application-failed.html

  http://helpx.Adobe.com/creative-cloud/KB/failed-install-creative-cloud-desktop.html

  or

  A chat session where an agent can remotely look inside your computer can help

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  Cloud creative support chat (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• Java plugin starts several times on firefox

  Hello

  I use firefox and I need to open several tabs to access the forms, oracle (which uses the java plugin)... in the past I had only a java running to open several tabs, but now for each tab, it starts a new process of java, eat all the free memory.

  This change on firefox or something in relation to the java update? I use jre7u40.

  How can I put back the old behavior?

  I created a new profile in firefox and it seems to solve the problem, now that the java plugin is shared between tabs ~ 5

• My toolbar disappeared completely. I still have the back arrows on the far left, but everything else is just... gone. I tried Firefox to stop and restart several times, but nothing does not change. All toolbars are checked in the view menu.

  July 13, 2010: My Firefox toolbar has suddenly disappeared, except for the back arrows on the left side. I tried Firefox stop and start several times, but nothing has changed. All toolbars are selected in the view menu... but nothing is visible!

  See the Navigation buttons such as back, home, bookmarks and recharge are missing

• 15 170tu ac: I HAV to press the power button several times to start the laptop...

  I HAV to press the power button several times to start the laptop... works well with the power supply on.

  all My drivers & bios is updated... but when I opened the lid... I HAV poer press several times the button and he then began 4-5 min.

  Hi @Vishalwagh123,

  Welcome to HP's Forums a great way to get help. It's a great place to find answers and advice! Thanks for the post.

  I understand you have questions turn on/off the device and you must press the power button several times for him to start. I'll be happy to help you.

  Please try these steps first. Perform a hard reset.

  • Steps to do:
  • Turn off the computer and unplug the charger. Then remove the battery.
  • Press and hold the power button on the unit for 15 seconds to carry out the static electrical charges inside the machine.
  • Replace the battery and the charger plug it back. Try to turn on the computer.

  If it fires up immediately the issue is resolved. Otherwise, try to turn on the computer without the battery and check that it works immediately.

  In your message, you said that it works very well with the charger. However, I need more clarity here to help you better.

  It works immediately when the adapter is connected and the power button is pushed only once?

  If you again press the power button several times, it may be a faulty power button, and you will need to contact the hotline at the service of the unit.

  Let me know what happens when you try to turn on the unit without the charger?

  Visit this link to contact support phone:

  http://HP.care/2bjG4nE

  Hope the problem is solved without hassle. Please keep me in the loop.

  Take care and have a week Holy.

• problem with power switch only works a 'cold' start after pushing several times.

  Original title: power switch problem

  The power switch on my computer doesn't work as a 'cold' start after pushing several times.
  Could I have accidentally re-set one "true or false? spend in the registry while trying to solve another problem?
  Dave

  Hello

  Looks like that the power switch has developed a problem, probably about to fail.

  Whatever settings are they should be consistent and not need to several tests.

  Check with a real computer store (the one that makes its own internal and no service
  leeks and glances at a Best Buy or other stores) or system manufacturer support
  (for systems custom Integrator system and the manufacturer in the case of construction of House).

  I hope this helps and happy holidays!

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Go off & on several times before the monitor turns on. Comp seems to start OK but the problem is with the screen.

  Original title: XP start help please...

  ... are to be turned off & on several times before monitor lights. Comp seems to start OK but the problem is with the screen. Do I have to make a boot disk & if so - HOW?

  Hello

  ·         What is the brand and model of the computer?

  ·         You get the error message?

  ·         Did you check the connection of the cable to the monitor?

  ·         Have you tried to update to the latest graphics card and motherboard chipset drivers?

  First, try to connect your monitor to a well known PC, maybe the old laptop that you use now. If the monitor works, the problem is with the video card in your PC. If the monitor does not light, the monitor. It is usually cheaper to buy a new monitor that in order to be an old repaired, unless the monitor is still under warranty.

  Try connecting a monitor well known to your PC. If the monitor works, your old monitor is fried and needs to be replaced.

  If your monitor works when connected to another PC, the problem could be your video card. First, and then you turn on your PC, the power and cooling case fans run they. If they do not, it could be the power supply.

  Then, open the computer case. Before you do anything inside, unplug the power supply.

  IMPORTANT! Touch any metal part of the computer case to connect to the PC. A single static spark can destroy computer circuits.

  If the video card is the type of card that plugs into a slot on the motherboard, remove the screws or attached at the top of the card, remove the card, to manipulate the card by the edges to avoid disturbing the circuits on the card, carefully and re - install the card. Sometimes simply reinstalling the card corrects the problem.

  If this does not work, replace the video card with a card of similar type. Perhaps now is the right time for an update of video card.

  If the video card is integrated into the motherboard, you can install a new card in one of the PCI slots on the motherboard. When the PC starts for the first time, go into the bios and disable the onboard video.

  Resources for troubleshooting problems in Windows XP

  http://support.Microsoft.com/kb/307960

• Computer not start, screen black, I have to turn on and off several times (I have Vista)

  When I turn on the computer, you hear the sound that is running, but I get a black screen with a white underscore on the upper left. Click on keyboard and nothing happened. I must turn on and off several times and then I get the Windows Vista logo.

  If the 2 methods below do not work, you may have to reinstall Vista:

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work, try to make a Bootable ERD to do a Startup Repair:

  As is the case with most computers/laptops these days, they do not come with good Vista disc to repair only the recovery disks.

  As your grave in the category above, download the ISO on the provided link and do a repair of the disc.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  You can make a tool to restart system, System Restore, etc. with it.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista repair disc.

  You can do a system restart tool, system, etc it restore.

  There is not a disk of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Help - HP Pavilion a6030.uk desktop computer. Have to press the power button several times to start?

  Hello

  I have a HP desktop computer. The model is HP Pavilion a6030.uk, Opertating system: windows vista.

  My computer has had no problems at all until yesterday for some reason, I had to push the switch several times to start until he finally turned and did normal starts. As I would press the power as normal to start button, but all of a sudden, it turns off after about 2 seconds and so I would tap on the switch several times and each time it will not start and turn off, then the power button could be pressed again until it would finally turn on and start and run as normal and seems to work correctly. And it was the same thing today, I pressed the power button mutiple times (for example 6 times) until she finally started as usual.

  Savvy/computer im not very well informed or wise in this area, please someone will help me and give me some advice/help to fix/resolve this problem.

  Thank you for taking the time to read this and any help would be appreciated for this problem.

  Thank you.

  Vonbon90, welcome to the forum.

  When I see these symptoms on an old computer, I think it may be a power supply (PSU) failure/ing.  Here's a guide that will help your troubleshooting it.

  In addition, you could test the memory.  This can be done by removing all modules of memory and replacing them one at the time and start.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• When I try to start lightroom 6 it opens only the first window, but nothing more. ligthroom closed several times, restarted the computer, update system, nothing. What can I do?, when I try to start lightroom 6 it opens only the first.

  When I try to start lightroom 6 it opens only the first window, but nothing more. ligthroom closed several times, restarted the computer, update system, nothing. What can I do?, when I try to start lightroom 6 it opens only the first.

  Hi silvers.

  Please make sure that your graphics card and Lightroom 6 are up-to-date. Latest version of Lightroom is 6.4.

  Please check the FAQ and troubleshooting of Adobe Lightroom GPU and disable the use of the GPU in Lightroom.

  What is your operating system?

  Kind regards

  Assani

• Lightroom CC (2015) does not start under win 10 of the programme. The diagnostic program announces that Lightroom is not compatible. I have installed several times and disconnected. LR does not start. Program of liver, but it does not work. How can I fix

  Lightroom CC (2015) does not start under win 10 program.
  Program diagnosis announcement only Lightroom is not compatible. J’ai installed several times and disconnected. LR does not start. Hepatic program, but it does not work. How do I correct?

  CHETNA Hello!
  It works again! Thank you and have a nice day!
  Snowy greetings from Finnish Lapland.

  Thank you

  Veikko Hamara

• I tried several times to install the updated Acrobat 11.0.14 version.  It downloads, verifies and starts to install, but never finished.  The installation program displays a 'wheel' in rotation that can go for hours.  I finally force leave the insta

  I tried several times to install the updated Acrobat 11.0.14 version.  It downloads, verifies and starts to install, but never finished.  The installation program displays a 'wheel' in rotation that can go for hours.  I finally force quit the installation program.  The update does ' t happen. I still have the 11.0.13 version.  How can I make this work?

  Mac https://forums.adobe.com/message/5470608 spinning wheel

  -Similar to Windows https://forums.adobe.com/message/5853430

• Bridge CC (64-bit) is unable to start the cache even after several time of virtue. Help! So frustrated!

  Bridge CC (64-bit) is unable to start the cache even after several time of virtue. Help! So frustrated!

  Hi julesmom,

  Please reset the Bridge preferences and then try it.

  Measures

  Start Adobe Bridge, and immediately press Ctrl + Alt + Shift (Windows) or command + Option + shift (Mac OS down) until the dialogue box reset settings appears.

  Select all three options - reset preferences, reset Standard Workspaces and all miniature Purge Cache - and then click OK.

  Reference: troubleshooting errors, freezes | Adobe Bridge | Windows, Mac OS

  Let us know if it works.

  Kind regards

  ~ Mohit

• Out of nowhere I get this error message "the application could not start properly (0xc000001g). Click OK ot close the application. "I have uninstalled and reinstalled several times.

  I nowhere hand, I get this error message "the application could not start properly (0xc000001g). Click OK ot close the application. "I have uninstalled and reinstalled several times.

  Hi Kingsberry and almathof,

  Please refer to this thread: Re: Premiere Pro 2015 won't open after the recent update

  Thank you

  Regalo