OHS start fails after the update of the portfolio

Similar Questions

• Satellite A210-199 does not start successfully after the BIOS update

  Hello

  I've got Sat A210-199.
  Yesterday I updated the BIOS, and after that problems occurred:

  While restarting my computer does not start. When I enter the BIOS after a while, it shuts down.
  I guess all this because the temperature of the CPU:

  When I do nothing it is 77 C. I don't think it's normal: (.)
  Computer is very recent, so it's probably not dust inside. And it's so hot from the start, but after the new BIOS, something bad happens.

  Why this temp is so high?
  There is no any process background or something.
  Is this normal?
  And what about this new BIOS?

  To be honest, something like this should not happen. I really don't understand why this is happening. I have updated the BIOS on friends A200 and mine P200 and everything works fine. Here on this forum we can only speculate on this issue, but what you need exactly's professional opinion.

  This probably not help but install recovery image and check with the factory settings. Make sure you also on the lower side cooling fan is not blocked and the laptop can be cooled properly. If the problem persists, you should contact the nearest authorized maintainer and clarify this issue.

  Sorry, but I don't really know what you can do in this situation. I don't see any other way to solve this problem.

  Good luck!

• Problem with XNET start VI after the creation of sessions

  I have a timed loop sending CAN messages via XNET screws. It works great, but I always lose the very first message. It matters little, I send the first message immediately after you create the XNET session or after a few milliseconds.

  The attached screenshot shows the initialization of my four sessions XNET. Although I am starting before the session with an XNET start VI, there is without success to get the first message.

  It seems that the sessions/CAN (selectable cards and HS CAN) interfaces are initialized only after the first call to write XNET. XNET write seems to imply XNET start (see documentation), but the appellant XNET start manually after the creation of sessions does not help.

  What I'm missing to get the interfaces online and ready before you send anything?

  I was able to solve this problem because they did not actually XNET screw sorry for this post.

• All of a sudden my 5.7 LR on win10 64-bit start fails with the error message something like "error reading from the cache of the preview... Please restart." reboot, repair, reinstall, or rename SLCache helps to repair.

  All of a sudden my 5.7 LR on win10 64-bit start fails with the error message something like "error reading from the cache of the preview... Please restart." reboot, repair, reinstall, or rename SLCache helps to repair.

  

  Hello

  Greetings!

  Close to Lightroom.
  Navigate to the location where the catalog is present (default value is within the pictures folder lightroom file)

  And delete the file previews.lrdata.

  Note: do not delete the catalog with the extension .lrcat file.

  Concerning

  Jitendra

• Failed to start Windows after the installation of updates

  HI, I currently use windows 7 32-bit and have been almost half a year now, nothing was wrong with it until just recently when I installed updates for windows and it goes across restart process. Whenever it restarts after the installation of updates it now in windows could not start and is system launch of repairs etc, when it finishes I cliquerai on end to end and then he launched startup correctly, also, I realize account updates, I have install are successful, when I connect (from the option view update history) , but I get suggestions of exact same update again just after the installation of the updates mentioned only, hope, it is specific help enough, would be much appreciated

  Can you provide the names, the updates that have been installed?

  see this article for when you are offered the same update again and again:
  http://support.Microsoft.com/kb/910339

• Does not start successfully after the installation of updates.

  My sister has installed about 16 updates to windows on his computer. For some unknown reason after these updates, the police on the websites was different (a bit pixelated). She could not know how to solve this problem otherwise that restore to before the update. Then she started to install updates in the sections. She installed upgrading Cumulative security for Internet Explorer 8. He said she needed to reboot to complete the update, so she hit the button to restart. It began to restart and but just sat there for about 8 minutes approximately. She hit the power button to turn it off and then turned back on. The windows icon appeared and the fully charged status bar but then he just sat there on a white screen. We turned off and on again and it has always the same thing. I tried hitting F12 and it did nothing. I hit F2 and it went to the options but I have no idea what I should do, if anything.

  So, can you help me? What should I do now?

  EDIT: I tried a few times to press F8 to boot into safe mode, and it does nothing. I also hit F12 and it brought me to a start menu. I hit "diagnoses" and it did nothing.

  Hi, please check the information here: http://cmdrkeene.com/quickly-repair-pc-problems

• Adobe Pro update fails after the implementation of software restriction policies Cryptolocker - need to trouble

  Hello everyone

  As part of our protection against the virus Cryptolocker for the rapid spread, I added an object of group policy with strategies for Software Restriction against the execution of files in the temporary directory used by Cryptolocker:

  %AppData%\*.exe

  %AppData%\*\*.exe

  %LocalAppData%\*.exe

  %LocalAppData%\*\*.exe

  for example the directories %APPDATA%\microsoft\windows\sendto and %LocalAppData% variable and a level here

  I also blocked the executables to run within different programs 'zip '.

  I learned later (second hand) that Acrobat Pro and Adobe Flash updates have been blocked by this SRP.  They get an explicit message or fail with another error.  The update download correctly, but when you try to install from the system tray icon, it fails.

  If I'll find the downloaded file. MSP file (I have Acrobat Pro 10, so mine was in c:\program data\adobe\ARM\Acrobat_10.1.5) and click on 'Install', it installs successfully.

  We have an administrator is not restricted, but do account updates for people is not a good long-term solution.

  Can someone with experience with this please tell me if there is a specific executable or executables that I can 'whitelist' by adding to my strategy of Software Restriction as a file "without restriction."  The kicker with the 'white list', it's that I need to bless a specific executable (for example I can't quote a directory or give wildcards... There must be a path and the fully qualified name).

  NOTE: We have for most of the Windows 7 machines (no Win 7 is Vista have so the same user directory structure) and a mixture of Acrobat 9 Pro, X, XI

  Thank you very much in advance for your help.

  Updates, most is the MSI file. In all cases, you succeed to make manual updates of http://www.adobe.com/support/downloads/product.jsp?product=1&platform=Windows. Download the most recent update (each update will tell you the necessary previous version where you can ignore some). Then perform updates in the order. Simply restart after the update is complete.

• MY POP3 accounts receive emails with lack and truncated attached files. This started only after the most recent update for Thunderbird Version 38.1.0

  I recently started having truncated the attachments in the emails to my POP3 accounts. The first I noticed was on 27 July 2015.
  I'm running Thunderbird Version 38.1.0 on Windows on Windows 7 Home Premium service pack 1. After the test, I found that this happens on all POP3 accounts only. IMAP accounts do not work properly.
  A single file is usually truncated, if I send several files to get a complete file one truncated and more sent are missing completely.

  I wanted to send a bug report, but your system is unusable because it asks us to load the daily accumulation and essay on a new account, but the link to the daily version is going nowhere. But it's ok

  Thank you

  Thanks Matt.
  I had no luck by disabling addons, and I found that I'm unable to start in SafeMode (another problem to solve), but in research and the elimination of other culprits (malware) this problem stopped.

• CCC and AMD graphics card failed after the driver update

  I have a HP Pavilion dv6 laptop 6 c-32eg.

  I recently tried to update my GPU driver, as was necessary to run a particular program (oclHashcat, if you're interested). I downloaded the installer from hereand he ran. It looks good, but after the required reboot, the screen resolution has been set at 800 x 600, instead of the usual 1366 x 768. Then, I got an error message saying something in the sense of "your AMD driver could not be installed because you do not have the required equipment. In Device Manager the GPU was something like "usinig windows has stopped this device because it has reported an error."

  If I try to open the CCC, the program runs for several minutes, with a relatively high CPU usage in the Task Manager, then the message "' Catalyst Control Center: the host Application has stopped working". "

  I have now tried different ways to solve this problem, which none have worked. Try to download a driver on the AMD website did not work, because the site said that the pilot was not appropriate for a computer with switchable graphics.

  My laptop doesn't seem to be using the AMD GPU as you try to run games as a test done drip slowly and with a minimum resolution.

  My laptop has doubled (switchable CCC) graphics:

  -AMD Radeon HD 7690 M XT card, with a 8.882.2.3000 driver version and date 30/09/2011.

  -And Intel HD Graphics Family, with, apparently, the same driver version and date as shown above. I can't know exactly what kind of GPU Intel it is.

  I also tried to update the graphic driver Intel, to see if that would fix the problem at all, but it made it worse: the screen become very red and low resolution. I fixed that by returning to a point just before performed system restore. Unfortunately, I don't think to do this before initially updated drivers.

  So, my question is: how to I find the full use of two graphics cards?

  Here is a copy - paste of my information system:

  Spoiler (Highlight to read)

  The performance Information and tools
  More details on my computer
  Component Details subscore Base score processor Intel (r) Core i5 - 2450 M CPU @ 2.50 GHz 7.0 5.9 determined by subscore more low memory (RAM) 8.00 GB 7.5 graphics Intel(r) HD Graphics Family 6.6 5861 MB Total graphics games Graph available memory 6.6 main 298 GB HDD free (462 GB Total) 5.9 Windows 7 Home Premium
  
  System manufacturer Hewlett-Packard model HP Pavilion dv6 Notebook PC Total amount of memory 8.00 GB RAM type system 64-bit operating system number of processor cores 2 total storage of 1397 GB disk partition size or your hard drives (C 298 GB free (462 GB Total) disk partition (D 325 GB free (932 GB Total) disk partition (E free 1 GB (4 GB Total) Media Player (F CD/DVD adapter type chart display)))) chart Intel(r) HD Graphics Family total available graphics card dedicated 6373 MB memory 2560 MB memory dedicated system memory 0 MB Shared system memory 3813 MB Display adapter driver version 8.882.2.3000 monitor main resolution 1366 x 768 DirectX version DirectX 10
  Information on the performance and tools more details on my computerComponent details subscore Base score processor Intel Core i5 - 2450 M CPU @ 2.50 GHz 7.0 5.9 determined by subscore more low (RAM) 8.00 GB 7.5 graphics Intel(r) HD Graphics Family 6.6 graphics games 5861 MB Total graphics memory available memory 6.6 main 298 GB HDD free (462 GB Total) 5.9 Windows 7 Home PremiumSystem manufacturer Hewlett-Packard model HP Pavilion dv6 Notebook PC type system memory 8.00 total GB system RAM, 64-bit operating system number of processors cores 2 total storage of 1397 GB disk partition size or your hard drives (C 298 GB free (462 GB Total) disk partition (D 325 GB free (932 GB Total) disk partition (E free 1 GB (4 GB Total) Media Player (F CD/DVD graphics Intel(r) HD Graphics Family Total graphic card available 6373 MB memory dedicated graphic 2560 MB system memory)))) dedicated memory 0 MB shared system memory 3813 MB version 8.882.2.3000 type graphics card driver monitor main resolution 1366 x 768 DirectX version DirectX 10

  Hello

  There may be a 3rd option left that you can try for one more set to gpu driver updates, but I would first get your system to a State where the switchable graphics work correctly.

  Try restoring the system first.

  If this does not work, the driver package AMD (containing two gpu drivers) you need can be downloaded from HP on the following link.

  http://ftp.HP.com/pub/SoftPaq/sp55001-55500/sp55092.exe

  In this case being able to find a game more set to driver updates, many people with your type of switchable graphics succeeded with the offers on the 3rd party site - I strongly recommend to read the Manual to get an understanding of how it works and why driver signature enforcement must be disabled in order to load these drivers.

  http://leshcatlabs.NET/

  Kind regards

  DP - K

• WiFi connection on c4580 fails after the automatic vista update windows.

  Hello

  There is a month my c4580 perfectly work on WiFi stoped working

  the reson seem to be updated auto matic windows, if I do a system restore the functions of the printer again, but a few days later, the connection went after an auto matic update

  to remedy this, I tried the following

  Following the recommendations of HP

  removed the Hp software and then try to install the drivers again after the download from their website form HP

  tried to install all updates firmware of HP

  tried to install without Firewall (bullguard)

  installed the latest firmware on my Linksys wifi router

  But still no luck

  the printer works perfectly on USB, but if I try to put it on wifi with the installation software stops

  It goes well until after I give my network key, and then it opens the network and communicates for a wile

  the last audit it does is trieng to connect to an IP address, then it stops telling me to fix the connection with the printer

  and the hp software is not responding so I have to restart my computer...

  I have no idea of what I can try again

  Help!

  Thank you

  Niels

  If you have the original CD, it get a L3 uninstall program and run that.  It will remove completely from your software.

  Reinstall the software from hp.com.

• Adobe DC installation fails after the most recent Windows and Mac updated

  During the installation of package (Adobe Creative Cloud) process stops, and then comes back.  Installation seems to be failing when the version check.  Tried the package and install separate;  No compatibility not test Adobe CC cleaning tool are able to correct the problem. Compatibility mode installs all applications except Adobe DC.

  Resolved for Windows 10.  Suite cannot be installed using MSI, instructions included with the configuration application require it be used.  Unable to solve the problem with the iMac OS 10.11

• Windows does not start until after the second day to have.

  I just got my laptop Toshiba yesterday with Windows 7 above. I used it for about 4 hours, when I'm done I turned it off by saying it close here go to start > stop. Before putting the laptop on I saw the lights on so I pressed the manual to close button, at the last second, I saw he said something as 341 on 356 updates installed, do not turn off the computer. I don't think a lot because I was tired so the next morning, I try to turn on my laptop and it stops after the Windows 7 load loading animation, and all I have is a black screen with a mouse. I tried to run in safe mode, same thing black screen with my ability to see where is my mouse.

  Contact Toshiba support under your warranty. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows 8 will start only after the mode 'sleep'

  Hello

  64-bit Windows 8 start I get the Windows logo first. It disappears and then a gray windows appears. Then nothing happens, no drive activity whatsoever. In the continuous boot order I put the laptop in standby mode. After getting it finally starts.

  I'm running Windows 8 64 bits on a Medion Akoya E6221.

  I disabled the closure of the hybrid, but this does not solve the problem.

  Thank you in advance for your help!

  Hans

  Problem solved!
  For some reason I couldn't find a BIOS update. An email on this subject for Medion remained unsanwered.
  Luckily a Microsoft employee on this forum told me that there is a. Applying it did the trick.

• vCenter Storage Monitoring Service Service initialization failed after the upgrade from 5.1 to 5.5

  I recently upgraded from vCenter 5.1 to 5.5. After the upgrade, I started getting health warnings for the VMware vCenter monitoring of Storage Service that say "failed to initialize the Service." I restarted the vCenter server and restart services several times and who has not deleted the question. When I look in the SMS. LOG file there is no activity in it since I did the upgrade (a week or more there). All prior activity in the SMS. JOURNAL seems to be well upward until the upgrade took place though. I found at least half a dozen KB articles that describe the various reasons why this error may occur, but they all relate to older versions of vCenter. Just to be complete, although I saw the symptoms in the articles and none of them really seem to be the same as what I see. My hypothesis is that perhaps the SMS did not get properly re-installed upgrading because I don't see any SMS subdirectory in the directory \Program Files\VMware\Infrastructure\tomcat\webapps but I do not know if this directory must exist on a 5.5 installation.

  If you would be grateful if anyone has any advice for troubleshooting for this type of error.

  Thank you

  Mike

  Change the credentials of the service account for VMware vSphere Profile-Driven Storage Service to those used to start the VMware vCenter Server service and the service of VMware VirtualCenter Management Webservices. By default, the account used Local System.

  Restart the service, the change was made, and then check.

• Successive connection LDAP fails after the first LDAP authorization: with wrong password

  Hello
  
  I am currently integration Oracle CC & B utility to LDAP (Sun Directory Server java - SunOne), but I made a post here because CC & B delegates the task of authentication to the server Weblogic (I user WLS version 10).
  
  In Weblogic, I configured two authentication providers:
  1. the principal is the LDAP authentication provider (defined as optional control indicator)
  2. secondary education is the default authentication provider (defined as optional control indicator)
  
  Currently, some users of CC & B are stored in LDAP, and some other (more users system) are stored in the default authentication provider.
  
  To help you make the problem more clear, I did the test with followingscenario:
  1. user LDUser2 (stored in LDAP) login with correct passwrod-> success
  2. the sysuser user (stored in the default authentication provider) connect with incorrect password-> access denied (what is good and normal)
  3. the LDUser2 (stored in LDAP) user login with password-> successful OK
  4. the sysuser user (stored in the default authentication provider) connect with correct password-> successful OK
  5. the user (stored in LDAP) LDUser2 connect with the incorrect password-> denied access, which is normal. However, from this point, the problem starts
  6. the user (stored in LDAP) LDUser2 connect with the right password-> rejected access KO is the problem
  7. connection (also stored in LDAP as LDUser2) LDUser1 with the right password of the user-> big problem of access denied KO
  8. the LDUser7 user (stored in the default authentication provider) connect with the right password-> successful access
  9 restart the server resets the situation, but once a user is stored in the LDAP connection with a wrong password (5 point number), attempts by users stored in LDAP fail.
  
  It seems that after the first LDAP authentication with wrong password, all users stored in LDAP connection attempts will fail.
  
  Help, please.
  Thank you.
  
  Jeffry

  Hello

  The connection attempt is made on console weblogic with the same result?

  If I'm not wrong, until WLS 10.3 it is a problem reported where once the user connects with password and username incorrect, all attempts after that results in the failure of the connection.

  The patch is available with up to 10.3 WLS support

  This might be the question however need to check.