Start my computer and I get an error message: C:\Windows\System32\mmc.exe

Similar Questions

• When I go to install Silverlight, I get an error message C:\Windows\system32\samcli.dll error message.

  samcli.dll

  I try to use Netflix... It worked last night and when I went to play today it asked me to install Silverlight... when I go to install Silverlight, I get an error message C:\Windows\system32\samcli.dll error message. I tried to uninstall Silverlight and reinstall it using Revo Uninstaller Pro and still, I get the same error message. You can provide any help would be greatly appreciated.

  Thank you

  Lisa

  samcli.dll is associated with Security Accounts Manager Client and not with Silverlight.

  Download this dll from here: -.

  http://www.dllme.com/dll/files/samcli_dll.html

  Now, replace the dll file that is corrupted with the dll file you downloaded here: -.

  C:\Windows\System32

  [Note: it is a hidden file, so you must enable Show hidden... files]

  [Organize--->---> the folder options view and search]

• When Vista starts, get error message about window\system32\igfxpers.exe

  I have a message to start my computer! It is said that the following file is correctly entered... window\system32\igfxpers.exe... What should I do?

  Hi AnabelRomero,

  1. Did you the latest changes on the computer?
  2. You have security software installed on the computer?
  3. Are you able to boot into Windows after the error message is displayed?
  4. When was the last time it was working fine?

  It looks not at the computer is infected with malware or virus infections, I suggest that you scan and remove any malware or computer virus infections and check if it helps.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx 

  You can also use Microsoft Security databases to scan your computer

  http://www.Microsoft.com/security/PC-security/MSE.aspx

  If you are unable to perform scan in normal mode, start the computer in safe mode with network mode and then run the analysis.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

• XP Pro gives me error message < root windows > \system32\ntoskrnl.exe is damaged and must be replaced. How to replace or fix this problem?

  I tried to reinstall XP Pro, but then I get another error message the file for web printer windows cannot find so it won't let me not finished reinstalling XP.  How can I solve this problem or solve the problem with the ntoskrnl.exe that need to be replaced?

  Susan77,
  Try the items listed in this article: http://support.microsoft.com/kb/314477 
  It covers the error you see and can be useful. Typing of my new Windows 7 64 bit and love it! Soli Deo Gloria!

• I tried to do a backup on a disk (a flash drive to be exact) on my computer and im getting the error message "demand is not supported load 0 x 80070032" what should I do? I have

  I went into the backup from the control panel and its saying that no replacement has been set up... I tried several times, just to be sure that I had set up the backup on my computer before and it worked very well, I don't know what else to do... help

  Hello
  All changes made to the computer before the show?
  Method 1:
  Run the tool on your computer system file checker. You can check the link that will give you information on how to use the System File Checker tool to fix system files missing or corrupted on Windows Vista or Windows 7 below:
  http://support.Microsoft.com/kb/929833

  Method 2:
  Run a check disk on the computer. Follow the steps.
  1. Select command prompt.
  2. type chkdsk/r (note: there is a space after chkdsk)
  3. restart the computer and allow to run the disk check.

  Important: When running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area so all available data on this risk to be lost

• I get an error message «c:\WINDOWS\Prefetch\TASKMGR.EXE-06144C13.pf is corrupt, run Dskchk»

  c:\WINDOWS\Prefetch\TASKMGR.exe-06144C13.PF corrupted

  I ran Dskchk several times and I still get the error.

  Is it possible to replace or repair the file.

  I also run Microsoft securty Scanner with no detected viruses.

  A word on what to do?

  In what circumstances this error comes up?

  When you run chkdsk (not dskchk), did you use the /F switch (i.e., chkdsk/f)?  Otherwise, errors are detected only and not fixed.

  The files in the Prefetch folder are used to improve performance.  As a general rule, you should leave this file only because Windows XP will periodically clean older files.  See http://www.edbott.com/weblog/2005/06/one-more-time-do-not-clean-out-your-prefetch-folder/

  On the other hand, although empty manually the Prefetch folder will cause a temporary decrease in performance, doing so may be justified if there is a corrupted file, as in your case.  See http://support.microsoft.com/kb/915163/en-us

  Thus, if running chkdsk /F (you'll have to answer Yes and then restart) is not fix things to the top, go to C:\Windows\Prefetch and delete the offending file.  If you are unable to remove it, after return and report you receive the error message.

• Error message: C:\Windows\System32\rstrui.exe "the parameter is incorrect."

  I'm so frustrated!  I tried to download Google Earth, and it would not load - so I started to experiment and I really screwed up the system!  Now, I get error messages saying the C drive is not accessible, and access is denied - trying to make a system restore I ge the message above saying the parameter is incorrect.  When I right click on the c drive, it shows that it is TOTALLY FULL - it wasn't a couple of days! I am running Vista 32 bit.  ANY help you can give me will be GREATLY appreciated!  I use the discussion groups in the office all the time and have always been able to get the right answer - I am hoping that will be the case here, although I do understand that this might be a bit more complicated.

  Thanks for getting back with me!  But I was so freaked out I got back my computer gurus and it costs $100, but it's fixed now!  Yes! If she was my own computer I probably would have continued to try here, but because it belongs to someone else, I didn't take a chance of really of screwing.  It turns out that the C drive was full (in color), and yet he says there's ZERO bites on it!  I wish I could be with my guru to see what he did... but at least I am in place and works now, so it's a GOOD thing! :))) Thanks much to answer and try to help me! Have a great week!

• I'm trying to update my computer and I get an error message A 8024, 006. How can I fix it?

  Can not install updates because of unknow error 8024 A 006.  Help, please

  Hi jacmgod,

  I can't find a reference to this error code. Can you tell me what kind of update you tried t? In the meantime, I can offer some general troubleshooting tips. First of all, run chkdsk from your pc to correct possible errors in file:

  Run Check the disk:

  1. click Startand type cmd in the box start the search .

  2 right-click cmd in the programs list and then click run as administrator. If you are prompted for an administrator password or a confirmation, type your password or click continue

  3. at the command prompt, type the following command and press ENTER: chkdsk /r

  4. If the request to run at the next reboot, typeand press ENTER.

  5 restart your computer

  Here is another tool to fix corrupt system files:

  The System File Checker tool:

  To determine if the problem you are experiencing is caused by one or more system files that are used by Windows Vista, run the System File Checker tool. The System File Checker tool analyzes the system files and replaces incorrect versions of system files by using the correct versions.

  To run the System File Checker tool, follow these steps:

  1. click Startand type cmd in the box start the search .

  2 right-click cmd in the programs list and then click run as administrator. If you are prompted for an administrator password or a confirmation, type your password or click continue

  3. at the command prompt, type the following command and press ENTER: sfc/scannow

  4. when the scan is complete, test to see if the problem you are experiencing is resolved.

  Finally, do a clean and start to see if cn you do the update:

  Clean boot

  Test in an environment clean boot to see if this problem is related to the interference of other programs / services:

  1. click on Start, type msconfig in the Search box and press ENTER. (If you are prompted for an administrator password or a confirmation, type the password, or click continue.)

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the Load Startup items check box.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click disable all.

  5. click on OK.

  6. When you are prompted, click restart.

  7 log on to your account.

  ---------------------------------------------------

  If the problem does not reappear when your computer is in clean boot mode, a background program probably causes interference. You can try to determine which background program is causing the problem when the computer is in clean boot mode.

  ---------------------------------------------------

  To find the process or program to cause follow the steps from half of the points Services allow, in the following article:

  How to perform a clean boot procedure to determine if background programs are interfering with a game or a program that you currently use

  http://support.Microsoft.com/kb/331796

  ---------------------------------------------------

  To restore your Normal startup:

  1. click on Start, type msconfig in the Search box and press ENTER. (If you are prompted for an administrator password or a confirmation, type the password, or click continue.)

  2. on the general tab, click Normal startup.

  3. When you are prompted, click restart.

  ---------------------------------------------------

  Stay in this mode and keep stable your computer until you experience the same problem, or it works long enough you know that you are experiencing is, after that you can restore to a normal start and give us your results.

  (Clean boot run your computer with minimum interference of any program or service that are not linked windows).

  Post here if you continue to have problems and give us a little more information as to what you're trying to do. Thank you

  Dave D.

  Dave D
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I sent a record of a conference that has an extension of VOC and I get an error message that Windows Media Player cannot open the file

  What should the sender to do with their recording of a conference, to convert it to a readable audio file that I could open with Windows Media player?

  Hi Kathy,

  VOC Extension is not supported by windows media player, you can check the link below which talk supported the extension of file with windows media player.

  Information on the types of media files that supports Windows Media Player

  http://support.Microsoft.com/kb/316992

  You can search for parry 3 Codecs or file converter supporting the .voc file type.

  Note: using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk

• Get the following message.c:\windows\system32\ddrawex.dll isn't is either not designed to run on windows or it contains an error

  My screen to count keeps blinking and I get the above message. I'm trying to update my activex announcement of directx, but nothing works. The activex was told that it was not recommended for my computer. What can I do? I was told to try to install the program again, but I don't know the original installation media. I don't know what to do and the flashing makes me crazy. Thanks, Chris150

  * original title - continues to Flash the screen of my computer and I get the following message.c:\windows\system32\ddrawex.dll is either not designed to run on windows or it contains an error. Try to install the prgram using the original installation media. *

  My screen to count keeps blinking and I get the above message. I'm trying to update my activex announcement of directx, but nothing works. The activex was told that it was not recommended for my computer. What can I do? I was told to try to install the program again, but I don't know the original installation media. I don't know what to do and the flashing makes me crazy. Thanks, Chris150

  Hey chris150

  on the link below, there are a few different methods to try to see one that works for your problem

  see if one of them will help you

  http://pcsupport.about.com/od/findbyerrormessage/a/ddrawes-DLL-not-found-missing-error.htm

  Walter, the time zone traveller

• error message; C:\Windows\System32/igfxres.dll

  Hi, I keep getting this error message c:\Windows/system32\igfxres.dll is not designed to run on windows or it contains an error.

  I am running windows vista Home premium. Can someone please help?

  The file belongs to your Intel video drivers. Install the latest version. Bring:

  1. site of the device mftr. ; OR
  2. site of the card mother mftr. If the material is on board; OR
  3. website of the OEM manufacturer for your specific machine if you have a PC OEM (HP, Dell, Sony, etc.).

  Read the installation instructions on the Web site where you get the drivers.

  To find out what hardware is in your computer:

  1. read all documentation that you got when you purchased the computer.
  2. If the computer is OEM, access the site Web of the OEM for your specific model machine and look at the specs (you'll be there to get the drivers anyway)
  3. download, install and run a program of inventory of the free system like Belarc Advisor or System Information for Windows.

  http://www.belarc.com/free_download.html - Belarc Advisor
  http://www.gtopala.com/ - System Information for Windows

  MS - MVP - Elephant Boy computers - don't panic!

• Continuous Windows\system32\wuauclt.exe pop up __16 bit subsystem MS-DOS error message: C:\Windows\system32\wuauclt.exe__The NTVDM CPU has encountered an invalid statement.

  have a couple of pop ups on my computer that appear every15 seconds or more. It is just an empty box with the title "Windows\system32\wuauclt.exe". Nothing in it. The other is a "16 bit MS-DOS subsystem" box with the following error message: "C:\Windows\system32\wuauclt.exe NTVDM CPU has met an invalid statement. CS:0000 IP:0077 OP:f0 37 05 02 0e choose 'Close' to end the application.

  When I choose 'close' or 'ignore' the windows go away but systematically re - appear about 15 seconds later. Now, I am just pass the windows out of the way and can use my computer like that.

  I ran scans on my computer but nothing was found.

  Since this problem started, my computer automated updates have not been installed. I understand that the above file has to do with automated updates. My Windows Update starts either in the Panel.

  I also had problems downloading the file exe running for installation on my computer since...

  Microsoft support directed me to this forum for help. Can anyone help?

  Hi Hibernatus,

  1. did you of recent changes on the computer?

  2 when was the last time it was working fine?

  3. what happens when you try to start Windows update? You receive an error message?

  Method 1

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you perform a clean boot and check.

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  Method 2

  The question Windows Update make sure that services associated with the update of Windows running on the computer.

  You must be logged on as administrator to perform these steps.

  (a) open administrative tools by clicking the Start button, click Control Panel, clicking system and Maintenance, and then clicking Administrative Tools.

  (b) double click Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (c) in the Services window, double-click in the Background Intelligent Transfer Service.

  (d) under the tab general , under Startup type, click Manual, and then click apply.

  (e) click on the general tab, click Start, and then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (f) in the Services window, double-click the Windows Update service.

  (g) under the tab general , next to Startup type, make sure that Automatic is selected.

  (h) next to Service status, check to see if the drive is listed. If this is not the case, click pie S, and then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (i) in the Services window, double-click Cryptographic service.

  (j) under the tab general , next to Startup type, make sure that Automatic is selected.

  (k) next toservice status, check if the drive is listed. If not, click Start, and then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (l) to close the Services window and try again to install updates to Windows.

  Also see the Microsoft article below if you use the Windows XP operating system.

  "16-bit MS-DOS subsystem" error message when you install a program

  http://support.Microsoft.com/kb/314452

  Error message when you install or start an MS-DOS-based program or 16 - bit Windows based

  http://support.Microsoft.com/kb/324767

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Computer not starting and I get an error message

  After that I ran the microsoft of what free security scan it found some files that were Trojan horses that he couldn't get rid of, so I deleted manually solve them some of the problems that I had. The end of the analysis told me to restart my computer so I did. But now it will not start and I get an error message that says: "a problem has been detected and windows has shut down to prevent damage to your computer. Then he told me to check the virus and to ensure that it is configured correctly and run the CHKDSK command to check the alteration of the hard disk and restart my computer. How am I supposed to do all this if I can't even start up? I tried to go into safe mode, but the same screen comes up. He gives this technical information at the end of the message. STOP: 0x0000007B (0xF79E4524, 0xC0000034, 0x00000000, 0x00000000) if someone could help me it would be so awesome thank you.

  Hello

  Check the disk for malware:

  Create a Bootable CD with the Trinity Rescue Kit - free - which comes with 5 antivirus programs
  Integrable Hirem is another choice - more can be found using Google.

  Trinity Rescue Kit - download on top right of the page
  http://trinityhome.org/home/index.php?wpid=1&front_id=12

  CD of Hirem boot is another good choice
  http://www.hirensbootcd.NET/Download.html
  http://www.hirensbootcd.NET/CD-contents/138-HBCD-111.html

  Scan a Windows PC for viruses from a Ubuntu Live CD
  http://www.howtogeek.com/HOWTO/14434/scan-a-Windows-PC-for-viruses-from-a-Ubuntu-Live-CD/

  ===================================================================

  You can also save the data and re-install Windows 7. The hard drive can be set
  another computer as a 2nd drive (the best) or in an external USB enclosure. Either would allow
  allows you to copy the data to removable media such as CD, DVD or other USB drives.

  Or you can use a boot Ubuntu CD to back up data.

  Use Ubuntu Live CD to backup files from your Windows computer dead
  http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windows-computer

  ===================================================================

  For slightly more:

  BCCode: 7B 0x0000007B

  INACCESSIBLE_BOOT_DEVICE bug control has a value of 0x0000007B. This bug check indicates that the Microsoft Windows operating system has lost access to the system partition during startup.

  Important information if you have received a STOP Code

  If you have received a blue screen error, or stop code, the computer stopped abruptly to protect against data loss. A hardware device, its driver or software might have caused this error. If your copy of Windows is shipped with your computer, contact your computer manufacturer. If you purchased Windows separately from your computer, Microsoft provides support. To find contact information for Microsoft or the manufacturer of your computer connect with Support.

  If you have experience with computers and try to recover from this error, follow the steps in the Microsoft article solution STOP (blue screen) errors in Windows.

  The following actions could prevent a mistake like this does not happen:

  1. Download and install updates for your computer from Windows Update device drivers.
  2. Scan your computer for computer viruses.
  3. Check your hard drive for errors.

  Cause

  Bug INACCESSIBLE_BOOT_DEVICE control often occurs due to a failure of the boot device. During the initialization of the I/O system, the boot device driver could have no initialize the boot device (usually a hard drive). Initialization of file system may have failed because it does not recognize the data on the boot device. In addition, repartition the system partition or installing a new SCSI adapter or disk controller could encourage this error.

  This error can also occur because of incompatible disc material. If the error occurred in the initial configuration of the system, the system have maybe installed on an unsupported drive or a SCSI controller. Some controllers are supported only by the drivers that are in the library of drivers Windows (WDL). (These drivers require the user to perform a custom installation.)

  Resolution

  This error always occurs during the startup of the system. This error often occurs before the debugger connection, kind of debugging can be difficult, if not impossible.

  Fix a defective boot device: If a boot device is at fault, you must change the boot options. For more information changing these options, see Software Configuration on the target computer.

  Solve a problem of incompatible hard disk: If the installation program automatically detects the controller, you may have to skip the detection and the disc of the specific manufacturer allows to load the driver. Also, check the availability of updates for the firmware of the system BIOS and SCSI controller. Updates of this kind are usually available on the website or BBS of the hardware manufacturer.

  Delete all material recently added, especially of hard disks or controllers, to see if the error is resolved. If the problematic material is a hard drive, the firmware version of the drive may be incompatible with your version of the Windows operating system. Contact the manufacturer for updates. If you have removed another material element and the error is resolved, conflicts of port IRQ or i/o likely exist. Reconfigure the new device according to the manufacturer's instructions.

  Confirm that the hard disk drivers, hard disk controllers and SCSI adapters are listed in the list of the products tested Microsoft Windows market.

  If you have recently added a driver, restart your computer, and then press F8 to character-based menu that displays the choice of operating system. In the menu of Advanced Options , select the last known good Configuration option. This option is most effective when you add a single driver or service at a time.

  In addition, check your computer for viruses using any update, commercial software that examines the Master Boot Record of the disk hard antivirus. All systems of Windows files can be infected by viruses.

  This error can also occur due to corruption of the hard drive. Run Chkdsk /f /r on the system partition. You must restart the computer before the start of the analysis of disk. If you cannot start the computer due to the error, use the Recovery Console and run Chkdsk/r.

  If you cannot start the system in the last known good configuration, you should try to boot from the Windows CD. Then, you can run Chkdsk from the Repair Console.

  Warning   If your system partition is formatted with the FAT file system the long file names that use the Windows operating system could be damaged if you use Scandisk or another MS-DOS-based disk tool to verify the integrity of your hard disk from MS-DOS. Always use the version of Chkdsk that matches your version of Windows.

  If your system has SCSI adapters, contact the card manufacturer for updated Windows drivers. Try to disable sync negotiation in the SCSI BIOS, check the wiring and the SCSI ID of each device and confirming the proper termination. For IDE devices, define the IDE port integrated as primary only. Also check each IDE device for setting good master/subordinate/stand alone . Try to remove all IDE devices except for the hard drives. Finally, check the system log in Event Viewer for additional error messages that might help identify the device or driver that generated the error.

  BCCode: 7B 0x0000007B<-- read="" this="">
  * 1138.html? order = votes http://www.faultwire.com/solutions-fatal_error/Check-for-viruses-on-your-Computer-0x0000007B-

  =================================================================

  If you do not have a Windows 7 disc, you can borrow a friends because they are not a copy
  protected. The manufacturer of your system will also sell the physical DVD cheap since you already
  Clean Windows. You can also do an ERD on another computer.

  Try the Startup Repair - (if at anytime, benefit you from some, but not full access coming to Windows
  return and then try to startup repair.)

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  Try the disk Options recovery or Windows 7 startup repair.

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  Also from the command PROMPT on the Console (if possible) recovery or a Windows 7 disc

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  Retry After Chkdsk startup repair.

  If after those you can try the system restore to fashion without failure or the valuation or Windows 7
  disc.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  --------------------------------------------------------------------

  If you need to repair disks - these help repair Windows not re-install.
  Often an ERD will help you when the recovery disk does not work.

  Download Windows 7 system recovery discs - charge now $9.75 for ISO
  images to make the discs.
  http://NeoSmart.net/blog/2009/Windows-7-system-repair-discs/

  How to create a Windows 7 - free system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  ======================================

  If necessary:

  What to do if Windows does not start correctly
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctly

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• I downloaded the file to click and install creative cloud, but when I run the program my computer starts to "blink". I get an error message, but it never starts to install it either. What is the problem and can I fix it?

  When I click on the icon to start the whole process, my computer starts to blink, but I get an error message. It does not begin to install creative cloud either. Any advice? This happened to someone else?

  
  

  Tyler, please try to remove remove creative cloud app - https://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html & creative cloud install app - https://helpx.adobe.com/creative-cloud/help/install-apps.html

  We would like to also know what version of OS are you using?

• When I start my computer. I get the error code: C:\System32\Spool\Drivers\W32x86\3\DLCFtime.dll, then he said: lack of entry: RunDLL entry

  When I start my computer. I get the error code: C:\System32\Spool\Drivers\W32x86\3\DLCFtime.dll, then he said: lack of entry: RunDLL entry

  My computer finish starting up but I no I don't need to solve this problem and don't no how... someone help me please... I am running windows xp

  Hi anni1275,

  1. did you of recent changes on the computer?

  2. you have any printer installed on the computer?

  DLCFtime.dll file is part of the Dell printer driver software.

  Links to the dell website and try the steps mentioned below, check if it helps.

  http://en.community.Dell.com/support-forums/peripherals/f/3528/t/18322252.aspx

   

   

  http://support.euro.Dell.com/support/topics/global.aspx/support/KCS/document?c=UK&l=en&s=Gen&docid=DSN_28E393B4B4A5ADEEE040A68F5B2849AA&isLegacy=true

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.