Error message: C:\Windows\System32\rstrui.exe "the parameter is incorrect."

Similar Questions

• windows\system32\rundll32.exe the parameter is incorrect. Cannoy get access to certain programs and cannot access the "msconfig".

  I get the windows\system32\rundll32.exe error following the parameter is incorrect. I tried a repair Rundll32 loading, but the computer will not accept. All microsoft and windows updates are up-to-date BLAH today. What to do next? When I try to use the box of computer help, a black box appears for about 1 second and the computer does nothing.  Not lock up and I can still do emails, just no game.

  Please run Doug Knox fix .exe (which is not a file .exe so you can run it) and then carefully swipe to the malware.

  http://www.dougknox.com/XP/file_assoc.htm
  http://www.elephantboycomputers.com/page2.html#Removing_Malware

  MS - MVP - Elephant Boy computers - don't panic!

• When Vista starts, get error message about window\system32\igfxpers.exe

  I have a message to start my computer! It is said that the following file is correctly entered... window\system32\igfxpers.exe... What should I do?

  Hi AnabelRomero,

  1. Did you the latest changes on the computer?
  2. You have security software installed on the computer?
  3. Are you able to boot into Windows after the error message is displayed?
  4. When was the last time it was working fine?

  It looks not at the computer is infected with malware or virus infections, I suggest that you scan and remove any malware or computer virus infections and check if it helps.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx 

  You can also use Microsoft Security databases to scan your computer

  http://www.Microsoft.com/security/PC-security/MSE.aspx

  If you are unable to perform scan in normal mode, start the computer in safe mode with network mode and then run the analysis.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

• Start my computer and I get an error message: C:\Windows\System32\mmc.exe

  original title: C:\Windows\System32\mmc.exe

  start my computer but I can not access all programs or windows

  Hi DesireeGarcia,

  ·         You get this message at Windows startup?

  ·         What happens when you try to access programs?

  ·         Have you checked the problem in safe mode?

  Step 1: Try to start the computer in safe mode and check if the problem persists.

  Step 2: If no problem occurs try to perform a clean boot. Refer to the below article mentioned on how to do it.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Note: make sure you put the computer to a Normal startup, once the troubleshooting completed.

  Please respond to the results and more information, so we can help you better

• XP Pro gives me error message < root windows > \system32\ntoskrnl.exe is damaged and must be replaced. How to replace or fix this problem?

  I tried to reinstall XP Pro, but then I get another error message the file for web printer windows cannot find so it won't let me not finished reinstalling XP.  How can I solve this problem or solve the problem with the ntoskrnl.exe that need to be replaced?

  Susan77,
  Try the items listed in this article: http://support.microsoft.com/kb/314477 
  It covers the error you see and can be useful. Typing of my new Windows 7 64 bit and love it! Soli Deo Gloria!

• Continuous Windows\system32\wuauclt.exe pop up __16 bit subsystem MS-DOS error message: C:\Windows\system32\wuauclt.exe__The NTVDM CPU has encountered an invalid statement.

  have a couple of pop ups on my computer that appear every15 seconds or more. It is just an empty box with the title "Windows\system32\wuauclt.exe". Nothing in it. The other is a "16 bit MS-DOS subsystem" box with the following error message: "C:\Windows\system32\wuauclt.exe NTVDM CPU has met an invalid statement. CS:0000 IP:0077 OP:f0 37 05 02 0e choose 'Close' to end the application.

  When I choose 'close' or 'ignore' the windows go away but systematically re - appear about 15 seconds later. Now, I am just pass the windows out of the way and can use my computer like that.

  I ran scans on my computer but nothing was found.

  Since this problem started, my computer automated updates have not been installed. I understand that the above file has to do with automated updates. My Windows Update starts either in the Panel.

  I also had problems downloading the file exe running for installation on my computer since...

  Microsoft support directed me to this forum for help. Can anyone help?

  Hi Hibernatus,

  1. did you of recent changes on the computer?

  2 when was the last time it was working fine?

  3. what happens when you try to start Windows update? You receive an error message?

  Method 1

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you perform a clean boot and check.

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  Method 2

  The question Windows Update make sure that services associated with the update of Windows running on the computer.

  You must be logged on as administrator to perform these steps.

  (a) open administrative tools by clicking the Start button, click Control Panel, clicking system and Maintenance, and then clicking Administrative Tools.

  (b) double click Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (c) in the Services window, double-click in the Background Intelligent Transfer Service.

  (d) under the tab general , under Startup type, click Manual, and then click apply.

  (e) click on the general tab, click Start, and then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (f) in the Services window, double-click the Windows Update service.

  (g) under the tab general , next to Startup type, make sure that Automatic is selected.

  (h) next to Service status, check to see if the drive is listed. If this is not the case, click pie S, and then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (i) in the Services window, double-click Cryptographic service.

  (j) under the tab general , next to Startup type, make sure that Automatic is selected.

  (k) next toservice status, check if the drive is listed. If not, click Start, and then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (l) to close the Services window and try again to install updates to Windows.

  Also see the Microsoft article below if you use the Windows XP operating system.

  "16-bit MS-DOS subsystem" error message when you install a program

  http://support.Microsoft.com/kb/314452

  Error message when you install or start an MS-DOS-based program or 16 - bit Windows based

  http://support.Microsoft.com/kb/324767

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• When you try to open any application in XP, get message 'open with' and error about c:\windows\system32\rundll32.exe

  my desktop icon is now working... "If I try to open any application a messege always apper" open with "a list of program... when I try to open the Control Panel control panel open, but when I try to open Add / Remove program error appear c:\windows\system32\rundll32.exe application not found. today a new appers message "this file has no program associated with it for performing this action. create an association in the folder options panel"Please help me

  Hi kipepeoliciousslemani,

  1. did you of recent changes on the computer?

  2 when was the last time it was working fine?

  3. it happens with all programs you are trying to open?

  Method 1

  See the Microsoft article below and run the fixit tool available (good for Windows XP so shims), check if it helps.

  When you run an .exe on a Windows Vista-based or Windows 7 computer file, the file may start another program

  http://support.Microsoft.com/kb/950505

  Method 2

  If the previous step fails, then analyze and remove any malware or computer virus infections and check.

  The scan below only works on the 32-bit version of Windows

  http://OneCare.live.com/site/en-us/default.htm

   

  You can use the Microsoft security essentials to scan your computer

  http://www.Microsoft.com/security_essentials/

• I get an error code whenever I start my computer. I have loaded several packs of registry repair software but cannot get rid of the message. The message bed error loading c:\windows\system32\pofusido.dll the specified module is not found

  I get an error code whenever I start my computer. I have loaded several packs of registry repair software but cannot get rid of the message. The message bed error loading c:\windows\system32\pofusido.dll the specified module is not found

  Hello

  I googled this file pofusido.dll and it could be caused by a virus.

  I would suggest that you disable the restore mode as viruses use it to reinstall set apart them.

  Download and install the free http://www.malwarebytes.org/

  Restart the computer and keep pressing F8 to get into safe mode with network connection.

  Once you have updated Malwarebytes run and see if it can remove the virus.

  So delete all cookies in your internet Explorer.

  Please keep in mind that my answer is based on the information in your message. More the better I can answer, Slan go foill, Paul

• error message; C:\Windows\System32/igfxres.dll

  Hi, I keep getting this error message c:\Windows/system32\igfxres.dll is not designed to run on windows or it contains an error.

  I am running windows vista Home premium. Can someone please help?

  The file belongs to your Intel video drivers. Install the latest version. Bring:

  1. site of the device mftr. ; OR
  2. site of the card mother mftr. If the material is on board; OR
  3. website of the OEM manufacturer for your specific machine if you have a PC OEM (HP, Dell, Sony, etc.).

  Read the installation instructions on the Web site where you get the drivers.

  To find out what hardware is in your computer:

  1. read all documentation that you got when you purchased the computer.
  2. If the computer is OEM, access the site Web of the OEM for your specific model machine and look at the specs (you'll be there to get the drivers anyway)
  3. download, install and run a program of inventory of the free system like Belarc Advisor or System Information for Windows.

  http://www.belarc.com/free_download.html - Belarc Advisor
  http://www.gtopala.com/ - System Information for Windows

  MS - MVP - Elephant Boy computers - don't panic!

• When I go to install Silverlight, I get an error message C:\Windows\system32\samcli.dll error message.

  samcli.dll

  I try to use Netflix... It worked last night and when I went to play today it asked me to install Silverlight... when I go to install Silverlight, I get an error message C:\Windows\system32\samcli.dll error message. I tried to uninstall Silverlight and reinstall it using Revo Uninstaller Pro and still, I get the same error message. You can provide any help would be greatly appreciated.

  Thank you

  Lisa

  samcli.dll is associated with Security Accounts Manager Client and not with Silverlight.

  Download this dll from here: -.

  http://www.dllme.com/dll/files/samcli_dll.html

  Now, replace the dll file that is corrupted with the dll file you downloaded here: -.

  C:\Windows\System32

  [Note: it is a hidden file, so you must enable Show hidden... files]

  [Organize--->---> the folder options view and search]

• I get the rundll error "error loading C:\WINDOWS\system32\vcnflrd.dll the specified module is not found."

  I get the rundll error "error loading C:\WINDOWS\system32\vcnflrd.dll the specified module is not found."
  I have Windows XP Professional, I installed Windows 7 and windows 8 and windows defender and avast antivirus scan and complete.  I did a full cleaning.

  Thank you

  I get the rundll error "error loading C:\WINDOWS\system32\vcnflrd.dll the specified module is not found."
  I have Windows XP Professional, I installed Windows 7 and windows 8 and windows defender and avast antivirus scan and complete.  I did a full cleaning.

  Thank you

  Hello

  you are fully updated? This means that the module cannot be found, what you want to do when you get this error? error codes >?

  check the reports on the problems and solutions

  You can do a support ticket, follow the link

  http://support.Microsoft.com/common/international.aspx?RDPATH=DM;en-us; Select & Target = support

  Microsoft product support has some tools that will be useful and can help to find a solution

  have a great day with OneCare Scan + 50 tips Windows 7even infected with the center of privacy? DELETE this Blog search & response threat Sysinternals Live Tools + TRANSLATOR+ Photosynth + Microsoft Security + Microsoft SUPPORT + Of Live Labs PIVOT + Microsoft Live Labs + Office 2010 beta + get Windows LIVE!

• Im trying to find my windows oc disk and I keep getting an error shell excute ex failed; Code 87 the parameter is incorrect how can I solve this problem

  Im trying to get my disk of oc windows, and I get an error shell excute ex failed; Code 87 the parameter is incorrect. Please help me

  How can I solve this problem. Thank you.

  Hello

  You did it changes on the computer before the problem started?

  I suggest you perform a startup repair.

  See these articles for help:
  
  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-fix-a-boot-startup-problem

• On the computer of the opening, this message: c:\windows\system32\rundll32.exe.

  I searched the drivers and utilities cd that came w/my computer and the operating system cd and do not find this file there.  Don't know what to do from this point on.  Cannot remove programs without this file.  Thanks for any help!

  When you try to open a control panel applet, you see a message like this:

  Control Panel
  Windows cannot find 'C:\WINDOWS\system32\rundll32.exe '.  Make sure you typed the name correctly and then try again.  To search for a file, click the Start button, and then click search.

  If the file is actually missing, it was probably quarantined (actually deleted) by some program antivirus or antimalware you use.

  You might want to reconsider some anti-virus or anti-malware software, you use and whether or not they are effective to protect your system.

  You can look in the c:\windows\system32 folder and see if the file is actually missing or not, but if it is really missing, you must replace it somehow.

  Since the file is one of the protected files 3498 who cares about XP, needed a backup copy of the file on your system in a few other cases.  You must do what the message says and search for the file.

  Click Start, search, for files and folders... and in the search box, enter:

  Rundll32.exe

  The click the search button to search for you the hard drive for a copy of the missing file.

  You can find a copy of the file that is missing in these folders:

  c:\Windows\System32\dllcache
  c:\windows\ServicePackFiles\i386

  If you find a copy in one of these two files, copy and paste it in the c:\windows\system32 folder.  There may be other files rundll32.exe on your system of MS updates, but they can only be those you need (they could work maybe).

  Answered in the affirmative if invited to replace the existing file.

  If you cannot find a copy of the file in one of these two places, there is one on my SkyDrive, you can download.  Here's how:

  I downloaded a copy of XP Pro SP3 file you need on my SkyDrive (everyone has a SkyDrive for file sharing).

  You can download it and when you do, place a copy of the file in these two folders (assuming that Windows is installed on your C drive):

  c:\Windows\System32
  c:\Windows\System32\dllcache (this is where XP keeps backups of important files).

  Here is the link to my SkyDrive and you can get the file you need here:
  https://SkyDrive.live.com/?CID=6a7e789cab1d6f39&ID=6A7E789CAB1D6F39! 311

  When you see the files available for download, you can not see the file extension (.exe, .dll, .cpl, .sys, .zip, etc.), but when download you them they will have the right extension.

  When you download the file (especially if you use Internet Explorer), when you get a chance to save the file, your browser is unable to save the file with an extension (by example, .exe, .dll, .cpl, .sys, .zip, etc) then you will need to manually add the extension appropriate to the file when you download the file before you save it.

  You can download the file without the extension, and then rename the file to add the appropriate extension.  You do not want to use a file called rundll32 when the name of the file should really be called rundll32.exe (if the downloaded file has no extension, you will need to change the name of the file to add the appropriate extension to make it work.

  You then put the downloaded files in the correct folders on your system.

  Note that advice to run sfc/scannow will not replace a file rundll32.exe missing in the system32 folder.  If you need to prove that to yourself, I also have instructions for it.

• Runtime error - program: C:\\windows\system32\nvvsvc.exe at startup of Windows XP & shutdown.

  Original title: program: C:\\windows\system32\nvvsvc.exe.

  The States 'system had to terminate in an unusual way.  'Runtime error' this happens when I reboot or try to shut down my system.  How can I fix this error.

  I had the same problem, but for some reason, my screen is black, has nothing about it except for the cursor. I can't go into the Device Manager to uninstall and reinstall.

• Microtek ScanWizard 3700 error message on Windows 7, "cannot find the scanner, use scanner probe...". »

  I recently bought a new computer running Windows 7.  I was able to use the ScanWizard 3700 on my old computer that worked on Windows XP.  I have installed the Scanwizard software, checking compatibility, and he said: 'no change necessary. "  But... I can't use it, I get an error message "cannot find scanner, scanner using the probe...". "The probe scanner can not find the scanner either.  I see that other people use ScanWizard on Windows 7 without any problem.  Anyone have any ideas why I can't make it work?

  Hello

  The Microtek ScanWizard 3700 is not compatible with Windows 7.

  http://support.Microtek.com/downloads/bymodelname.phtml?srch_in=&AXN=2&slct_mdl=6

  Download and install the Windows 7 compatibility-mode drivers and check.

  Make older programs in this version of Windows (Windows 7)

  Hope this information helps.