Start on this stuff AVI conversion?
There has been a lot of chatter on the conversion of AVI files to the "correct" version If an AVI is a container, what hell must it contain to be updateable in PP? If say 'AVI' is like saying 'automotive', how can I say it was a Lexus?
In my situation, I need to enter several old TV shows on DVD in Premiere Pro CS4. In the end, I want to generate filies FLV, with the best quality , as I can get.
I copied the contents of the first DVD on my hard drive (four VOBs, as well as their IFOs and BUPs) that make up a 60 minutes TV show.
- What is the 'best' utility to change/convert these files to two or more "whatever" which will publish first? Please define bit "matter".
- All things considered, I even want to mess with notice? Is there another form that would be easier to deal with?
- Is it still a good idea to circumvent the process 'rip', as I did, to the process of 'recode '?
- I started using Nero 9 and ripped the DVD to MP4s (their flavor of owners). Do not change.
Then I "converted" them to AVI with some freeware module. Problem (video, in PPCS4, at a normal speed, runs about 70 mph, with audio pass 20 in the visualisation and the timeline pane. The files play OK in media players and in Premiere Pro 2.0 as well.) The converted files (AVI) are about a quarter of the size of Nero MP4 files.
- Your is really really tired of chasing its tail.
Anyone?
Only works with the last update. (apparently)
Tags: Premiere
Similar Questions
-
ORA-12703: this character set conversion is not supported
Hello
STH wrong here, can someone please advice what should I do?
You can see the details below,
Thank you
RMAN > RUN
2 > {}
3 > SET until TIME ' to_date (May 24, 2010 18:00 ',' DD-MM-YYYY HH24:MI:SS') ";
4 > RESTORE database;
5 > RECOVER DATABASE;
{6 >}
executing command: SET until clause
From restoration to May 25, 10
using channel ORA_DISK_1
creation of data fno = 6 name file = D:\ORACLE\BISE1\ORADATA\BISE1DB\DWH_PRD_STAGING_01_
REOR_REORG0. DBF
creating file data fno = 14 name = D:\ORACLE\BISE1\ORADATA\BISE1DB\DWH_PRD_STAGING_02
Comprehensive REORG0. DBF
channel ORA_DISK_1: from datafile backupset restoration
channel ORA_DISK_1: specifying datafile (s) to restore from backup set
restoring datafile 00001 to D:\ORACLE\BISE1\ORADATA\BISE1DB\SYSTEM01. DBF
restoring datafile 00002 to D:\ORACLE\BISE1\ORADATA\BISE1DB\UNDOTBS01. DBF
restoring datafile 00003 to D:\ORACLE\BISE1\ORADATA\BISE1DB\SYSAUX01. DBF
restoring datafile 00004 to D:\ORACLE\BISE1\ORADATA\BISE1DB\USERS01. DBF
restoring datafile 00005 to D:\ORACLE\BISE1\ORADATA\BISE1DB\EXAMPLE01. DBF
restoring datafile 00007 to D:\ORACLE\BISE1\ORADATA\BISE1DB\DWH_PRD_DIMENSIONS_0
1 DBF
restoring datafile 00008 to D:\ORACLE\BISE1\ORADATA\BISE1DB\DWH_PRD_FACTS_01_REO
RG0_REORG0. DBF
restoring datafile 00009 to D:\ORACLE\BISE1\ORADATA\BISE1DB\DWH_PRD_INDEXES_01.D
BF
restoring datafile 00011 to D:\ORACLE\BISE1\ORADATA\BISE1DB\DWH_TST_DIMENSIONS_0
1 DBF
restoring datafile 00012 to D:\ORACLE\BISE1\ORADATA\BISE1DB\DWH_TST_FACTS_01_REO
RG0_REORG0. DBF
restoring datafile 00013 at D:\ORACLE\BISE1\ORADATA\BISE1DB\DWH_TST_INDEXES_01.D
BF
restoring datafile 00015 to D:\ORACLE\BISE1\ORADATA\BISE1DB\DWH_TST_STAGING_01_R
EORG0. DBF
channel ORA_DISK_1: backup D:\TESTBI_BACKUP\32LEG5CR_1_1 piece reading
channel ORA_DISK_1: restored the backup part 1
piece handle = D:\TESTBI_BACKUP\32LEG5CR_1_1 tag = BACKUP_BISE1DB_000_052410030823
channel ORA_DISK_1: restore complete, duration: 00:41:37
RMAN-00571: ===========================================================
RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
RMAN-00571: ===========================================================
RMAN-03002: failure of the restore command at 25/05/2010 16:32:18
ORA-12703: this character set conversion is not supportedTry following
SET NLS_LANG = AMERICAN_AMERICA. AR8MSWIN1256
NLS_DATE_FORMAT value = HH24:MI:SS: DD-MM-YYYYRMAN > RUN
2 > {}
3 > SET until TIME ' to_date (May 24, 2010 18:00 ',' DD-MM-YYYY HH24:MI:SS') ";
4 > RESTORE DATABASE;
5 > RECOVER DATABASE;
{6 >}for example:
C:\Documents and Settings\Administrateur > SET NLS_LANG = AMERICAN_AMERICA. AR8MSWIN12
56C:\Documents and Settings\Administrateur > value NLS_DATE_FORMAT = HH24:MI:S DD-MM-YYYY
SC:\Documents and Settings\Administrateur > rman target /.
Recovery Manager: Release 10.2.0.1.0 - Production on Tue may 25 20:30:51 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
connected to target database: T (DBID = 608834747)
RMAN > run
2 > {}
3 > SET until TIME ' to_date (May 25, 2010 20:29 ',' DD-MM-YYYY HH24:MI:SS') ";
4 > RESTORE DATABASE;
5 > RECOVER DATABASE;
{6 >}executing command: SET until clause
using the control file of the target instead of recovery catalog databaseFrom restoration to 2010-05-25 20:32:33
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid = 159 devtype = DISKchannel ORA_DISK_1: from datafile backupset restoration
channel ORA_DISK_1: specifying datafile (s) to restore from backup set
restoring datafile 00001 to D:\ORACLE\PRODUCT\10.2.0\ORADATA\T\SYSTEM01. DBF
restoring datafile 00002 to D:\ORACLE\PRODUCT\10.2.0\ORADATA\T\UNDOTBS01. DBF
restoring datafile 00003 to D:\ORACLE\PRODUCT\10.2.0\ORADATA\T\SYSAUX01. DBF
restoring datafile 00004 to D:\ORACLE\PRODUCT\10.2.0\ORADATA\T\USERS01. DBF
channel ORA_DISK_1: backup D:\ORACLE\PRODUCT\10.2.0\FLASH_REC piece reading
OVERY_AREA\T\BACKUPSET\2010_05_25\O1_MF_NNNDF_TAG20100525T202245_5ZQTT62X_. BKP
RMAN-00571: ===========================================================
RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
RMAN-00571: ===========================================================
RMAN-03002: failure of the restore command at 2010-05-25 20:32:37
ORA-19870: error reading backup total D:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AR
EA\T\BACKUPSET\2010_05_25\O1_MF_NNNDF_TAG20100525T202245_5ZQTT62X_. BKP
ORA-19573: failed to get exclusive enqueue for datafile 1RMAN > shutdown immediate;
database closed
dismounted database
Instance Oracle to closeRMAN > startup mount;
connected to the database target (not started)
Oracle instance started
mounted databaseTotal System Global Area 125829120 bytes
Bytes of size 1247660 fixed
67110484 variable size bytes
54525952 of database buffers bytes
Redo buffers 2945024 bytesRMAN > run
2 > {}
3 > SET until TIME ' to_date (May 25, 2010 20:29 ',' DD-MM-YYYY HH24:MI:SS') ";
4 > RESTORE DATABASE;
5 > RECOVER DATABASE;
{6 >}executing command: SET until clause
From restoration to 25/05/2010 20:34:25
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid = 156 devtype = DISKchannel ORA_DISK_1: from datafile backupset restoration
channel ORA_DISK_1: specifying datafile (s) to restore from backup set
restoring datafile 00001 to D:\ORACLE\PRODUCT\10.2.0\ORADATA\T\SYSTEM01. DBF
restoring datafile 00002 to D:\ORACLE\PRODUCT\10.2.0\ORADATA\T\UNDOTBS01. DBF
restoring datafile 00003 to D:\ORACLE\PRODUCT\10.2.0\ORADATA\T\SYSAUX01. DBF
restoring datafile 00004 to D:\ORACLE\PRODUCT\10.2.0\ORADATA\T\USERS01. DBF
channel ORA_DISK_1: backup D:\ORACLE\PRODUCT\10.2.0\FLASH_REC piece reading
OVERY_AREA\T\BACKUPSET\2010_05_25\O1_MF_NNNDF_TAG20100525T202245_5ZQTT62X_. BKP
channel ORA_DISK_1: restored the backup part 1
room handle=D:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\T\BACKUPSET\2010_05_25
\O1_MF_NNNDF_TAG20100525T202245_5ZQTT62X_. Tag BKP = TAG20100525T202245
channel ORA_DISK_1: restore complete, duration: 00:00:35
Restoration finished in 2010-05-25 20:35:03Starting recover at 2010-05-25 20:35:03
using channel ORA_DISK_1starting media recovery
archive log thread 1 sequence 3 is already on the disk that the file D:\ORACLE\PRODUCT\10.
2.0\FLASH_RECOVERY_AREA\T\ARCHIVELOG\2010_05_25\O1_MF_1_3_5ZQTYVPY_. ARC
archive log thread 1 sequence 4 is already on the disk that the file D:\ORACLE\PRODUCT\10.
2.0\FLASH_RECOVERY_AREA\T\ARCHIVELOG\2010_05_25\O1_MF_1_4_5ZQTZC1Y_. ARC
archive log thread 1 sequence 5 is already on the disk that the file D:\ORACLE\PRODUCT\10.
2.0\FLASH_RECOVERY_AREA\T\ARCHIVELOG\2010_05_25\O1_MF_1_5_5ZQV6SRW_. ARC
archive log filename=D:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\T\ARCHIVELOG\2
010_05_25\O1_MF_1_3_5ZQTYVPY_. Wire ARC = 1 = 3 sequence
archive log filename=D:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\T\ARCHIVELOG\2
010_05_25\O1_MF_1_4_5ZQTZC1Y_. Wire ARC = 1 sequence = 4
media recovery complete, duration: 00:00:02
Finished recover at 2010-05-25 20:35:07RMAN > alter database open resetlogs;
open database
RMAN >
Published by: admin on May 25, 2010 08:37
-
New Sections in Pages - 'Starting on this page' not an option?
Hello
I am creating several sections on one page in the Pages so that I can create sections with different numbers of columns.
I'm running on a problem that create a section break automatically starts a section on a new page. When I try to select "Start this page" on the "create a new Section" menu drop-down format of the Document, the option is grayed out.
What should I do to "starting with this page", an option?
It's easier to do in Pages ' 09, which took a Break from layout and a column break. V6 and v5 pages eliminated paused, so you have to improvise.
There are two different approaches to a layout page in single column, two columns and return to single column. The two approaches are easier if you are available with showing invisible mode (click on the images to enlarge):
- Preferences pages: leadership: Alignment Guides: both are checked.
- Two sections
- Regular and one single column followed:
- Insert menu: column break
- Format text panel: tab page layout: 2 column
- Insert text in multiple columns and add additional yield at the end of the last sentence.
- Insert menu: column break
-
My folders disappeared when 10.6.8 OS10.11.3. In any case, to get this stuff back in folders rather than a long list of files?
Where they disappeared?
Some changes that may be what you watch:
- All of my files - this is the search folder that searches all your files in your home and presents them in one place. They were not moved, they are displayed just like they are.
- Framed by default - the sidebar returns the values by default for all folders that you placed there will need to be added again.
Your files are stored inside your folder into subfolders such as Documents, movies, pictures, etc. They are all should still be there. You can add one of these folders to the sidebar by dragging them there, or you can use the tab of the sidebar in the Finder preferences.
You can access your file in the Finder with cmd-shift-h (menu go).
-
Hello world
I know, there are several other threads on this topic, but I couldn't find a working solution. I currently have no OS on my DELL XPS 17 L702X. When I try to install from a USB stick bootable Windows 7 Home Premium x 64 I get this error message: windows cannot be installed on this physical drive of this computer may not support the start-up this drive make sure that the drive controller is enabled in the computer's bios menu.I've tried wiping HARD drive and reformat with GParted. I don't really know what I could do.I would be very grateful if you could help meHello
I suggest that you contact the manufacturer of the computer to change the BIOS settings and check if it is has updated the BIOS.
Important: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.
Let us know the results. We will be happy to help you further.
-
W7 Live Mail "you have sent messages in your out box, you want to send now." I just started having this regular msg basis whenever I stop "Live Mail" is incorrect. I have no problems sending or receiving.
Ja.
Can I assume that you have enabled the shipping box to make sure there isn't a message stuck there?
If you currently have problems using Windows Live Mail, please try to fix it by following these steps:
Type "Wlarp" into the search (without quotes of course), and then press enter > fix all programs WLE
-
I turned on my computer & it started making this strange buzzing
Original title: weird buzz...
I turned on my computer & it started making this strange hum. The only time where I do not that is that if I turn my volume to zero.
Mute does not work... I don't hear anything, except the buzzing, even when you watch videos or play music... I checked my sound card, & my
the computer is updated. It was working fine yesterday... :/I turned on my computer & it started making this strange hum. The only time where I do not that is that if I turn my volume to zero.
Mute does not work... I don't hear anything, except the buzzing, even when you watch videos or play music... I checked my sound card, & my
the computer is updated. It was working fine yesterday... :/I get the same thing on a windows 7 X 64 system. It's pretty boring. What is find a solution?
I got it fixed! I uninstalled my speakers, and then shut down my computer. I turned it on the computer reinstalled the sound and the hum disappeared. (:
-
I just started getting this error message:
RundDLL
"There is a problem starting
c:\Users\username\AppData\Local\Temp\stppvxe\starvfn\wow.dll ".
the specified module could not be found
The computer seems to work ok and selecting ok will leave the error, and allow the user to continue. Any suggestions on what this could be and how get rid of?
Thank you
Danielle
Original title: starvfn\wow.dll
Hello
Thanks for posting in the Microsoft Community.
The description of the issue, you get wow.dll at startup. I'll be happy to help you on this question.
1. don't you make changes to the computer before the show?
2. when exactly you get the error message?This problem can occur if the waw.dll file is corrupted.
Method 1: I would say that you run SFC scan. Scan SFC will be scans all protected system files and replaces incorrect versions with appropriate Microsoft versions.
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833Method 2: I suggest you perform the clean boot and remove the program that is causing the problem.
How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8
http://support.Microsoft.com/kb/929135Note: Follow how to reset the computer to start as usual after a repair by article KB929135 clean boot to reset the computer in normal mode.
Method 3: This problem can also occur if the computer is affected by the virus.
Microsoft safety scanner
http://www.Microsoft.com/security/scanner/en-us/default.aspxNote:
when you perform online virus scanyou will lose some data which are affected by the virus. Microsoft is not responsible for the loss of this data.Hope this information is helpful and let us know if you need help with Windows in the future. We will be happy to help.
-
What is the error code: 213:19... Photoshop Elements will not start past this error message
-
All this stuff of bundled software. Any info on them please?
I have the brand new HP Pavillion 23 A6 Vision 23 "all in one PC. Of course, it comes with the webcam. I never know about this bunch of bundled stuff. Maybe someone here would be kind enough to tell me if they are freeware or is going to be a trial I will pay, in which case I have no desire to start. The majority of this list came immediately the Add/REMOVE. Now that I made the list I see that it is too much for a person probably know them all. I'm not a big fan of music and video and games downloads. Eventually, I would keep if free games, but not if they are fresh. Yet once, maybe, you could number and type Y for Freeware and N for the trial. Not always clearly they do if you have a trial or free until it is installed.
1. power connected by Meridian music
2. connected remotely
3. Hello (I do not music downloads from sites if this applies to this program)
4. bejeweled (trial or Freeware?)
5. build a lo5 4 - Power Source
6 Chuzze Deluxe
7. cradle of Egypt Collectors Edition
8. cradle of Rome
9 Cyberlink Label Print
10 Cyberlink Media Suite 10
11 Cyberlink PhotoDirector
12 Cyberlink Power to Go
13 Cyberlink PowerDirector 10
14 Cyberlink Power DVD
15 Cyberlink YouCam (pretty sure to? or just their version?)
16 farm Frenzy
17 FATE: The King cursed
18. final Drive Fury
19 FlatOut 2
20. Governor of Poker Premium Edition
21 Hoyle Card Games
22 HP Games (825 M... wow!)
23 HP their
24 jewel Match 3
25 John Deere Drive Green
26. Luxor evolved
27. mahjongg Dimensions Deluxe: tiles in time
28 Peggle Nights
29. the penguins
30 polar Bowler
31 polar Golfer
32. roads Of Rome
33 vacation Quest
34 WildTangent Games
35 WildTangent Games App
36. Zuma revenge
I tried to write my signature in this area on the screen, but it doesn't seem to work? : v lolHello
Here is a list of my "contribution": s
3. (you can use it someday, not only music),
9, 10, 11, 12, 13, 14 & 15: in order to simplify your life. If you want to use the webcam, Youcam is probably a must.
I don't know the rest, they are probably games. I've never played computer games except Solitaire, during the end of the 1980s.Kind regards.
-
Cannot start Windows 7 after the conversion of the physical machine
Hello
I converted my windows 7 64 bit running physical machine to the virtual machine using converter 5.0. I am running VMWare Workstation 8.0. My physical machine hid the 100 MB boot partition and 90 GB main partition. During the conversion, I don't have an option to select a hidden partition, nor did I want in my virtual machine. Conversion failed with the following message (planned):
Unable to find the system volume, reconfiguration is not possible.
Then, I started the virtual machine using the Windows DVD and selected the option "repair". Once I arrived, I used diskpart to make my active primary partition and then followed the steps in this KB http://kb.vmware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1037507 to fix everything including BCD. Once this was done, I used converted to reconfigure the virtual computer, and this time he succeeded. Everything was good and as expected up to that point. Now, when I start the VM, I get by BIOS init and then I get a black screen - no messages at all and he vm it is here without doing anything. I tried to fix it again and everything seems good (checked all the information using diskpart, bootrec and bcdedit so that automated repair) - everything seems to be in order, but the black screen is all I see when I try to start.
Any help to guide me to this point is very popular figure.
Thank you
Andrey
Disk2vhd create a vhd file
Starwinds V2V converter converts the virtual hard disk into a vmdk
This vmdk is assigned to a new virtual machine
first boot the virtual machine goes into a Windows 7 drivers restore CD you patchmy notes:http://sanbarrow.com/p2v2008r2.html
-
Let fall speed when starting to save the AVI with camera basler GigE
Hi all
I use 2 cameras GigE of Ace basler at 60 frames per second to capture of animal locomotion. I randomly experience this kind of problem. When I start to save in a start/stop button and save videos in the HDD sometimes lower at 20-14 fps frame rate and a framework to skip 2 or 3. After that, the pace has become stable at 60 frames per second.
Here are the parameters and specifications of the overall program:
-J' use a loop of producer/consumer (I've ever known a fill of the queue even when the rate of drop occur)
-J' fixed bandwidth of the card Intel GigE from 100 to 500 for each camera
-sent packet size = 8000
-firewall disabled
-execution of vi in higher mode
I observed that the dropping of the pace occur when the vi run for a while without interaction with the operator (the operator configure other settings in another computer, so the vi only acquire the video without saving)
I have attached the vi
Thank you for your help
Alex
Hi Eric and Isaac
Finally, the problem was similar to that indicated by Peter Westwood in his post 'lost GigE frames/buffers '. I discovered that the problem occur with the version of labview 2012. Indeed, I tried with the 2011 version and I have it all fall. So, I'm doing the same thing that Peter is "I changed the program, so that keeps an account number of buffer (incrementing the number of buffer on each bucket) and specifies the number of buffer to the VI Grab." "It works well, even on the occasions when the loop of the acquisition is sometimes momentarily delayed for up to a second or more, i suspect, Windows to write the contents of the disk the disk buffer, or do some other household.
So even if the fps drop the program acquire the right frame and in the video I do not see any image ignored
Best regards
Alex
-
After a session 2 nites E-mail there, many programs said message error "could not start program from this location. In addition, long delays after you clicked on a link, a large display hourglass for up to several minutes. Have tried to rebuild, but I think that the problem is still there. Any suggestions?
What is a "mail session?
What is, "have tried to rebuild?"
Edition with Service Pack of Windows XP _ _?
What anti-virus application that you use, and if she slept in day?
Search for malware:
Download, install, execute, update and perform analyses complete system with the two following applications:
Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)
Search online with eSet Online Scanner.
The less you have to run all the time, most things you want to run will perform:
Use Autoruns to understand this all starts when your computer's / when you log in. Look for whatever it is you do not know using Google (or ask here.) You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.
You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory. This can help you to identify applications that you might want to consider alternatives for and get rid of all together.
Do a house cleaning and the dust of this hard drive:
You can free up disk space (will also help get rid of the things that you do not use) through the following steps:
Windows XP should take between 4.5 and 9 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.
If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
http://www3.TELUS.NET/dandemar/spack.htm
(Especially of interest here - #4)
(Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning
How to use disk cleanup
http://support.Microsoft.com/kb/310312You can disable hibernation if it is enabled and you do not...
When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:
-Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
-Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
-Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.You can control the amount of space your system restore can use...
1. Click Start, right click my computer and then click Properties.
2. click on the System Restore tab.
3. highlight one of your readers (or C: If you only) and click on the button "settings".
4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
5. click on OK. Then click OK again.You can control the amount of space used may or may not temporary Internet files...
Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...
-Open a copy of Microsoft Internet Explorer.
-Select TOOLS - Internet Options.
-On the general tab in the section 'Temporary Internet files', follow these steps:
-Click on 'Delete the Cookies' (click OK)
-Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
-Click OK.
-Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
-Once it's done, click OK, close Internet Explorer, open Internet Explorer.You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:
CCleaner (free!)
http://www.CCleaner.com/
(just disk cleanup - do not play with the part of the registry for the moment)Other ways to free up space...
SequoiaView
http://www.win.Tue.nl/SequoiaView/JDiskReport
http://www.jgoodies.com/freeware/JDiskReport/index.htmlThose who can help you discover visually where all space is used. Then, you can determine what to do.
After that - you want to check any physical errors and fix everything for efficient access"
CHKDSK
How to scan your disks for errors* will take time and a reboot.Defragment
How to defragment your hard drives* will take timeCleaning the components of update on your Windows XP computer
While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need. This will help you ensure that your system update is ready to do it for you.
Download and run the MSRT tool manually:
http://www.Microsoft.com/security/malwareremove/default.mspx
(Ignore the details and download the tool to download and save to your desktop, run it.)Reset.
Download/install the latest program Windows installation (for your operating system):
(Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
(Download and save it to your desktop, run it.)Reset.
and...
Download the latest version of Windows Update (x 86) agent here:
http://go.Microsoft.com/fwlink/?LinkId=91237
... and save it to the root of your C:\ drive. After you register on the root of the C:\ drive, follow these steps:Close all Internet Explorer Windows and other applications.
AutoScan--> RUN and type:
%SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
--> Click OK.(If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...
Reset.
Now reset your Windows with this FixIt components update (you * NOT * use the aggressive version):
How to reset the Windows Update components?Reset.
Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing you pouvez wish to make:
Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.
If you want, come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end. This isn't 100% necessary - but I'd be willing to bet that you would gain some performance and features in making this part.
-
How can I clean the file deleted? All started doing this! don24
WHEN I CLICK ON DELETED ITEMS RIGHT
'EMPTY DELETED ITEMS' FOLDER BOX GOES UP. I CLICK ABOVE
THEN I CLICK ON 'YES' "ARE YOU SURE YOU WANT DLET"FOLDER OF THE DELETED ELEMENT CONTENT.
BOX COMESUP "UNKOWN ERROR HAS OCCURRED." IT WILL NOT REMOVE THE 'DELETED ITEMS FOLDER.
HELP, HELP, HELP
THIS JUST STARTED THIS AFTER YEARS OF NO PROBLEMS
lee24don
What is Windows Mail? Try to compact and repair the database. -
tried everything, run mcafee, malware bytes, cc cleaner, mircosoft Mr fix it, cleaned up my Start menu. recently downloaded from the apple software updates, this problem has produced about the same time, but not quite sure? all the scans came back with nothing. otherwise, pc works fine, very weird.
Hello
Follow the procedure described here clean boot to isolate the problem: http://support.microsoft.com/kb/929135
Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org
Maybe you are looking for
-
iMac fan runs full speed after the migration wizard
Hi, just a clean installed 10.9.5 BONES and then I used the migration assistant to transfer my backup time machine from my old computer. He made the transfer, took nearly 4 hours. Then when he was done he rebooted the computer, and as soon as he star
-
Television season faded button 'Bought', but individual episodes still have price tags?
I have a new laptop, and I am re - download all my iTunes purchases. There are a few shows that I bought the season / "completed" my season, but a few that individual episodes, I bought. The problem is that the things that I bought in the last month
-
I did a downgrade to my laptop, download the drivers, everything works fine, but there is a problem, does not install the control panel for vaio, vaio care work, but isn't the control panel and the touchpad is not work as smartpad, I downloaded all t
-
myRIO can't find my shared library .so
Hi all I have developed a shared .so library to run on a device myRIO. I moved my shared library for the path/usr/lib of the myRIO. When I run the .VI I get this error: Deployment RT.viRT.vi loaded with errors on the target and was closed. LabVIEW: U
-
How can I remove restore points created daily by Software Distribution Service 3.0?
Are not only all these points using the space on my hard drive to restore?