Start PC problems & browser slow loading images

Similar Questions

• Updates to windows in the last 7 days caused problems of slow loading of machines vista OS?

  Machine Vista my sister began to take 20 to 25 minutes to load Internet Explorer and also games (not on the Internet).

  Anyone who suffers from this?

  Yesterday (April 16, 2013), I restored the position of CPC to 09/04/13 and it seemed to work very well at that. So I re-run Windows updates and after the reboot needed it still cost to be loadingn as it should.

  So I decided to restart again and we're back where we took 25 minutes to load.

  Is this a known problem. Disabling is a possible update and that could be the cause of the problem?

  Hello

  Thanks for posting your question on the Forums of community of Microsoft.
  1. do you get an error message/code?
  2 are all updates are installed on the computer?
   
  I ask you to provide a list of the number of KB updates installed during this period. In order to check the updates are installed, refer to:
  See the Windows updates are installed
  http://Windows.Microsoft.com/en-IE/Windows-Vista/see-which-Windows-updates-are-installed
   
  Here are some ways you can follow to troubleshoot the computer running slow.
   
  Method 1:
  Difficulty of Windows system performance slow computer problems: http://support.microsoft.com/mats/slow_windows_performance/
   
  Method 2:

  Check if the problem persists in the boot.

  Reference:

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8
  http://support.Microsoft.com/kb/929135

  Note: See "How to reset the computer to start as usual after a clean boot troubleshooting"

  under more information to prepare the computer to start as usual after a repair.

   

  See also:

  Optimize Windows Vista for better performance

  http://Windows.Microsoft.com/en-in/Windows-Vista/optimize-Windows-Vista-for-better-performance

  Important: When running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area so all available data on this risk to be lost

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

   

  Hope this solves the problem.

• HP Probook 470 go cancel the loading image and then start boots motorcycle option

  My HP Probook 470 GO

  Suddenly I appeared cancel loading image and then start option boots on the output screen and can not do anything further to will not windwos raise.

  When the father of the F7 to do an iybaci my spare key hp not registered recovery recovery

  Hi @mdcom,

  Once access you the link provided discussion forums should be the category where you can ask your question.

  Kind regards
  George

• Problem loading image in the ToolTip widget

  I have the ToolTip widget on and clicked on until the Image frame, but how to replace the image with mine? At this level, when I go to the Menu to fill out all of the options are grayed out. Yet I do not see a "load image" in the dialog of the widget.  Y at - it another way in this container of the widget? thnx

  Hello

  You have several options: you can "re-edit" the image in the palette of assets, or you can remove the placeholder image and paste your own as described in http://www.adobekb.com/typography_pt3.html (text wrapping around a picture in a block of text)

  Abhishek

• Problems loading image

  Hello everyone,

  I'm new to flex development and I am developing simple AIR for playback of image file (JPG) from my local machine. I displayed this image later, however, I am unable to read the image. I use the loader class, but it is not reading all the bytes. Here are the lines of code. I have placed "test.jpg" in the folder "bin-debug" of my AIR.

  I have been struggling with this for some time and would really appreciate if someone can help out me.

  var loader: URLLoader = new URLLoader();

  var request: URLRequest = new URLRequest ('test.jpg');

  Loader.Load (request);

  Best regards

  Priyanka G.

  Hello

  You get the loaded image of the complete code mentioned below event handler

  var loader: URLLoader = new URLLoader();

  var request: URLRequest = new URLRequest ('test.jpg');

  Loader.Load (request);

  charger. EventListener (Event.COMPLETE, onComplete);

  loader.addEventListener (IOErrorEvent.IO_ERROR, onInCompleteLoad);

  function onComplete(event:Event):void

  {

  var loader1:URLLoader = URLLoader (event.target);

  charger 1 will have the image

  }

  function onInCompleteLoad(event:Event):void

  {

  }

• Explorer 8 is really bad compared to 6. It hangs very, very slow loading, if cela an inprovement, then you are in trouble!

  Explorer 8 is really bad compared to 6. It CRASHES constantly, is very slow loading. If cela an inprovement, then you're in trouble. The difficulty of this piece of garbage!

  Hello goodwrench70, welcome.

  Internet Explorer 8, the conditions are correct, will run at normal speed. If the browser is slow or if it crashes, it could be a number of possibilities.

  My suggestion would be to first try and launch IE8 in no add-on mode. This will allow us to see if maybe something 3 rd-party is causing the problem.

  1. click on START
  2. click on "programs".
  3. click on "Accessories".
  4. click on "system tools."
  5. click on 'Internet Explorer 8 (no add-on).

  If the browser still runs slowly or crashes, you can place the machine in a clean boot state.

  1. click on START
  2 type "msconfig" (without the quotes) and press enter
  3. go to the "Startup" tab and uncheck all the entries displayed
  4. click on 'Apply' at the bottom right
  5 restart your computer

  If the browser still runs slowly or crashes, you can try using a different browser to see if the problem is systemic, or just with Internet Explorer. Search "Web Browser" in your search engine. There are a number available there.

  If another browser to work properly, then I suggest to uninstall and reinstall Internet Explorer 8. After the reinstallation, I go to Windows Update and download all the updates that are available for IE8.

  Link reference for the manual uninstall IE8: http://support.microsoft.com/default.aspx/kb/957700

  Hope this helps,

  Thank you!

  Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Slow loading of Firefox and web pages.

  I have Firefox Version 38.05 on Windows 7 and have refreshed, tried for a new cache.checked HTTP on the Add-ons and always have the same problems
  The statement above about slow loading on my Firefox appears on my desktop, but not on my Windows 7 laptop. I tried all the solutions advocated, and so far nothing works. There is a possibility that some other programs may be in conflict with Firefox? This problem has been ongoing for several months and my patience is wearing thin. Any suggestions, corrections or advice? Thank you

  Created a new profile and had the same problem, although I did not remove the original profile of news: today, I followed through and continued with the rest of the steps as indicated in the notice mentioned previously. Sorry, but it does not solve my problem.

  As a last resort, I uninstalled my antivirus McAfee and lo and here's all my slow misfortunes with my browser have disappeared. I install another antivirus (AVG) and all browsers seem to work as it should!

• My iPad WiFi Air video very slow loading same 3 full bar signal

  My iPad WiFi Air video very slow loading same 3 full bar signal... Any suggestion?

  Should I send to AppleCare or upgrade to the latest version of iOS?

  Yes, update to the latest version, 9.3.1. Also here are a few general suggestions for problems of Wi - Fi. Suggest you start at the top and down, maybe they'll help...

  (1) perform a forced reboot: hold the Home and Sleep/Wake buttons simultaneously for about 15-20 seconds, until the Apple logo appears. Leave the device to reboot.

  (2) resetting the network settings: settings > general > reset > reset network settings. Join the network again.

  (3) reboot router/Modem: unplug power for 2 minutes and reconnect. Update the Firmware on the router (support Web site of the manufacturer for a new FW check). Also try different bands (2.4 GHz and 5 GHz) and different bandwidths (recommended for 2.4 to 20 MHz bandwidth).

  (4) change of Google DNS: settings > Wi - Fi > click the network, delete all the numbers under DNS and enter 8.8.8.8 or otherwise 8.8.4.4

  (5) disable the prioritization of device on the router if this feature is available.

  (6) determine if other wireless network devices work well (other iOS devices, Mac, PC).

  (7) try the device on another network, i.e., neighbors, the public coffee house, etc.

  (8) to restore the device (ask for more details if you wish).

  https://support.Apple.com/en-us/HT201252

  (9) go to the Apple Store for the evaluation of the material.

  Council: https://discussions.apple.com/docs/DOC-9892

• EA4500 - slow loading for Web sites randomly

  Hi guys,.

  I have this problem, try to load sites like http://animeflv.net/ or http://www.reddit.com/r/leagueoflegends/ that they get stuck and start very slow loading. I follow the guide MTU and set it to 1300, but it did not improve it.

  Also, I did reset using the administrator and manually by pressing the red button. Really, I don't know what to do and would like to help.

  Thank you.

  At the end of the day, he fixed himself, ISP problem, I guess. Thanks for the help.

• How to load images with a delay?

  Let's say I have a JSON from an HTTP request. The JSON contains several JPG and text links.

  For each JPG link and text, I want that they be displayed in a field like that.

  

  And here is the code in the field:

  public ProductField extends Field {
  
      String text;
      Bitmap bmp
  
      public CustomField(String text, String imageURL){
          bmp = Bitmap.getBitmapResource("blank.png");
      }
  
      public void paint(Graphics g){
          //....
      }
  
      public void updateBitmap(String url){
          bitmap = BitmapUtil.loadBitmapFromURL(url);
  
          // draw the bitmap on XYRect
          dest = new XYRect(0, 0, bitmap.getWidth(), bitmap.getHeight());
          invalidate();
      }
  }
  

  I realize that load images takes time, so I don't load them immediately. I have only to load the text and display an empty bitmap in the bitmap field. The actual bitmap will be charged when the updateBitmap() method is called.

  And here's how to add these field on the screen (not a 100% valid code, but I hope you will illustrate the idea)

  VerticalFieldManager vfm = new VerticalFieldManager
  
  // an array of bitmap URLS, which will be loaded later
  final String[] urls = new String[json_array_size];
  
  for (int x = 0; x < json_array.size; x++){
      CustomField field = new CustomField(..);
  
      // store bitmap URLs in array
      urls[x] = json_array.getJSONObject(x).getString("url");
      vfm.add(field);
      vfm.add(new SeparatorField());
  }
  
  Thread t = new Thread( new Runnable() {
      public void run() {
          for(int i = 0; i < len;i += 2) {
              synchronized(UiApplication.getEventLock()) {
                  CustomField cf = (CustomField) vfm.getField(i);
                  cf.updateBitmap(urls[i]);
             }
              try{
                  Thread.sleep(2000);
              }
              catch(Exception e){ }
              }
          }
  });
  

  Seems that all the images are loaded simultaneously. What I want is something like:

  display bitmap #1-2 seconds of delay - display bitmap #2 - delay 2 sec - display bitmap #3 - delay 2 sec etc..

  How to solve this problem?

  You can remove the block synchronized as you don't make any changes to the user interface, you read a value of a UI element.
  About your son, I can't get started, maybe a start() would help. do not race

• Premiere Pro CS6 closes unexpectedly when loading images or videos in the Viewer.

  I've been using CS6 since May of 2013.  I currently work on a Mac. I've never had problems. I used it one day last week, then all of a sudden a few days ago is when the problems started. Premiere Pro starts normally (new or existing project), I can even import media. But I'm not able to load Images or videos in the Viewer, and I'm able to just drag and drop on the timeline. Audio seems to drag on the timeline very well.

  I tried many things to get wrong the question such as:

  1. start a new project. (Thought maybe something in the existing project was corrupted).

  2. opening a project older that I knew worked well in the past. (In addition, the new projects of thought were corrupt.)

  3. transcoding video files. (Think of the media was corrupted).

  4 restart the computer.

  5. hold 'Shift' when you start Premiere Pro.

  I don't get the error codes, just a dialog box that says: "sorry, a serious error has occurred which requires Adobe Premiere Pro to stop. We will try to save your current project".

  Thanks for your help.

  Hi Luther.

  Welcome to the Adobe Forums.

  What version of Mac OS are you using?

  Try to repair the preferences by opening the window of finder click on go and

  Choose go to folder and type ~/library and press ENTER. Then go to Preferences > Adobe

  and rename the 6.0 6.0.old folder. If you use the Mavericks (OS 10.9) try to give permissions for the

  File Adobe as well.

  Just reply in case the problem persists.

  Thank you

• When I run a web browser immediately loaded two blank tabs. How to make the browser to load the only?

  When I run a web browser immediately loaded two blank tabs. How to make the browser to load the only?

  Have you checked the home page to make sure that if is not the vertical bar (|) symbols?

  See the following for a few suggestions:

  • https://support.Mozilla.org/KB/Firefox+has+just+updated+tab+shows+each+time+you+start+Firefox
  • https://support.mozilla.org/kb/How+to+set+the+home+page - Firefox supports several home pages separated by ' |' symbol
  • http://KB.mozillazine.org/Preferences_not_saved

• Laptop started having problems connecting to internet connections Wi - Fi

  in recent weeks my laptop new (6 months) started having problems connecting to wireless devices after spending hours ranging from hollow forums, check the settings in device etc, computer managers them laptop turns off, restarts said there was a problem that caused the laptop to the stop and then when it restarts it connects to the wireless device fine. If I stop back on the laptop, the problem when I turn it on.

  Not only it will pick up my wireless network, it says no wireless networks found despite her grateful normally about 15 other wireless connections, that my neighbors.

  Does anyone have a solution in the long term to this problem. I am a student and spent more than 3 hours trying to fix today and I don't have the time to deal with this all day.

  Thanks in advance

  > in the last few weeks my laptop new (6 months) started having problems connecting to wireless devices
  Have you changed some settings or perhaps updated driver WLAN? I mean, I can't imagine that problems start without reason.
  It is not easy to say what may be the problem. Perhaps, you must reinstall the recovery image and test the feature with the factory settings.

• Mac problem and slow reel - 10.11.3

  Just after the last update, I've done two or three days before, to 10.11.3. on my MBP, early 2011, I have problems with slow Mac, every click and type are followed by 10 to 20 sec, sometimes more, to wait than roulette to finish the "beachballing. Let alone having more applications running - I need to do to the work I'm doing at the moment.

  I did a repair disk utility, it fixed a problem of partitioning and improved for an hour or two, but the problem came back.

  Also had OnyX check the disk start to set permissions etc. - who also helped but for a little while.

  During or after the upgrade began the FileVault encryption (it gets paused if not plugged in power) and it is not yet finished. It's the only thing that happened at the time that I can associate this slowdown of the problem; Although I can't tell if it is related or the origin of the problem.

  I wanted to make a Time Machine backup, but knowing there ages and could be confused with this question, I did not yet.

  I can hardly use the computer and just hope I can see the answers here. I was surprised that I managed to type a message here. I will try to install EtreCheck, hope it will work and send a report here.

  Thank you in advance!

  Yes, post your report EtreCheck a step to help us hopefully will fix the bewitching of your computer problem.  Before you do it well, you have antivirus programs (AVG, Avira, Avast, Intego, Kaspersky, McAfee, Norton, Sophos, Trusteer, etc) or 'maintenance' apps (AVG Cleaner, CCleaner, CleanMyMac, CleanMyDrive, MacCleaner, MacKeeper, Memory Cleaner, TuneMyMac, etc.) installed?

• Satellite L500D - Iinitially had a problem "could not load the profile.

  Satellite L500D initially had a problem 'could not load profile' then stop. It is now the windows installation discs that I don't have. Where can I get them? They can be downloaded from Microsoft or Toshiba sites?

  Error message:
  File: \boot\BCD
  Status: OxcOOOOOOf
  Info: an error occurred while trying to enter the boot configuration data

  ANY HELP WILL BE GREATLY APPRECIATED THANKS

  Hey Buddy,

  > They can be downloaded from Microsoft or Toshiba sites?
  No, the disc can t be downloaded because it s not for free.

  You can start in safe mode?

  In the worst case operating system is confusing to the top and you have to reinstall Windows, but so you can take the Toshiba Recovery disk that will restore your notebook back to factory with all the drivers and tools of Toshiba.