Start the Application Windows in Mac

Similar Questions

• Start the application at startup of Windows 8

  Hi all

  I'm launching my application on Windows 8 at startup. I tried the Task Scheduler. My concern is that, with Task Scheduler, the application begins only after the desktop appears. My intention is to start the application at startup without having to navigate the desktop.

  Any help is appreciated.

  Thank you

  Narayanan K

  Task Scheduler will launch an application, even if you do not visit the office.

  Or, you can just put a shortcut in your startup folder icon.

  Press +R to display the run box, type : startup of the shell and put any icon.  It will run when you connect.

• cannot move the application window = Windows does not know how to do windows.

  It is quite ironic that the company that filed the name windows does not the best job to design a GUI of windows desktop:

  1. If I run a browser with multiple tabs (usually 30) opened with a connection with limited bandwidth (cable modem), the browser window opens but is locked in place (it cannot be dragged by the grab bar) until all the tabs are loaded.  ~ 30-40 seconds.  What is happening with this?  Who designed the graphical interface of Windows?

  Furthermore, is not a failure to set bookmarks, multiple tabs are left open because many activities underway, that's what tabs are for.

  2. If a secondary application window / "door" is open, the application window is locked in place.  If an attempt is made to drag the window of the grab bar, the pane starts a queasy nod.  The pane must be closed before the window can be moved.  The component can then be reopened to complete the desired operation.  Is this a real problem?  Well Yes, sometimes a lot of time is wasted juggling and spinning to get the installer of Windows GUI/desktop as you want, for example: obtaining information from a window of the underlying application and before deciding what to do.  This applies to windows, not windows, not MAC OS, Linux not.  Windows forever.

  Re. 1. If I run a browser with many tabs...

  It is not so much the result of the design of GUI but a work function how graphical operating systems.   Events, such as the mouse messages are queued in a message loop, and there is a communication between an application program and Windows if a callback procedure.  The operating system cannot always respond instantly when an application is busy as any other treatment happens.  Open the 30 windows! on the application startup is a lot of treatment and is bogged down the loop CPU and message.   If you want an instant answer to OS any level of demand, you can look to a supercomputer rather than a PC multi-million dollar.

  Re. 2. If a secondary application window / "door" is open, the application window is locked in place.

  The "sub-sub-window/pane' is properly called a modal dialog box.  Windows are usually coded in modal form (which means that they should be closed before a continuous program) when they include a message critical, or can be used to configure the application settings.  If you would like more information see http://en.wikipedia.org/wiki/Modal_window

  These two conditions certainly exist in other operating systems.

• I was doing a winpeshl.exe.error when starting "the application was not properly initialze (0xc0000006). "Click to complete the application.

  I was doing a winpeshl.exe.error when starting "the application was not properly initialze (0xc0000006). "Click to complete the application" when I click ok it reboots. I can even recover the system, tried F8 startup, alt/F10, F2, launch repair system, Safe Mode and all the rest and still get the same error. System specs are Acer Aspire 5920, Intel T5450 processor, 2 GB ram, 160 GB of HDD, windows vista edition Home premium.  I am currently under the memory diagnostic tool windows, but it is said that the test results will be displayed again once you log in, but I can't log in to view them.  The test seems to be hanging around 21% so I don't know how well it will do

  Hi A1W1LL,

  A clean boot helps eliminate software conflicts.  Let us check if software is causing the problem by following the clean boot procedure that may help you resolve the issue.

  To perform the clean boot procedure, follow the instructions in the link below.

  Step 1: Perform a clean boot
  Step 2: Enable half the services
  Step 3: Determine whether the problem returns
  Step 4: Enable half of the startup items
  Step 5: Determine whether the problem returns
  Step 6: Resolve the problem
  Step 7: Reset the computer to start as usual

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135

  After reviewing the issue, put the computer into Normal mode.
  Uninstall or update the program that is causing the problem.

  If you are not able to boot to the desktop, you can try to restore your computer from WinRE.

  1. Insert the Windows Vista installation disc in the disc drive, and then start the computer.
  2. Press any key when the message "Press any key to boot from CD or DVD".
  3. Select a language, a time and currency, and a keyboard or input method, and then click Next.
  4. click on repair your computer.
  5. in the System Recovery Options dialog box, select the drive of your Windows installation and click Next
  6. in the System Recovery Options dialog box, click System Restore.
  7. follow the instructions in the wizard to restore system as usual and choose the appropriate restore point.
  8. click Finish to restore the system.

  Please post back and let us know if it helped to solve your problem.

  Kind regards
  KarthiK TP

• BTTray.exe, error to start the Application.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:BTTray.exe, error to start the Application.

  • Programs that you have problems with the Bluetooth does not work overwhelming
  • BTTray.exe, Application error messages start error.
  • Recent changes made to your computer: just updated to windows update
  • What have you tried to solve the problem, I tried to look at Windows Update and also send mail to Microsoft

  Read the following article to see if it helps to solve the problem: http://support.dell.com/support/topics/global.aspx/support/dsn/en/document?c=us&dl=false&l=en&s=gen&docid=6CF68D431EAAB41BE040AE0AB6E16686&doclang=en.

  Are you still using the BTTray?  If this isn't the case, we can solve the problem in a more easy way.

  Go tohttp://technet.microsoft.com/en-us/sysinternals/bb963902.aspx and run Autoruns and click all.  Search bttray.exe or mfc80.dll and when you find it uncheck the box to prevent it from start to start.  Check the entire list as there may be several entries.  When you're done, click OK and restart.   The message should be gone.

  If this does not work, try a boot minimum http://support.microsoft.com/kb/929135.  If the problem goes away then it's just a matter of tracking down the culprit at the origin of the problem.   Follow the procedures described in the article.  Once found, remove, delete, disable or uninstall.  Once remember to put Vista in normal status, as described in the procedures. If the problem occurs in clean mode then just restore the system to normal and reboot - this solution will not work.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Some time ago I bought Photoshop Elements in the apple App Store. I worked well. Now, if I try to start the application I get the message "Please do not run this application within this application package. On the other hand, it please launch Adobe Photos

  Some time ago I bought Photoshop Elements in the apple App Store. I worked well. Now, if I try to start the application I get the message "Please do not run this application within this application package. "Instead, please run Adobe Photoshop elements 13 of your Application folder. I tried this but it does not work. What to do to run the program?

  Follow these steps, Editor does not start | Mac App Store version

• starts the application server

  Hello
  in tools 8.52 in 2008, in which file should I register the domain name to start the application server automatically restart when?
  He was psntsrv.cfg in PS_HOME/appserv 8.49.
  Thank you.

  start the PSADMIN and choose the option
  (6) Service configuration
  and then
  (1) configure Windows Service
  Provide the name of CRP, the appserver you want to start automatically as a service

  In the Administration of PeopleSoft Services menu option
  (2) install the Windows Service
  This will create a new service, in my case
  PeopleSoft_C__apps_psoft_config

  Kind regards

  Halin

• Issue by starting the application server.

  I installed Tux 8.1 under windows 2003 on PT 8.48.16.
  
  Whenver I'm trying to start the application server I m getting the error message below.
  
  I had tried all the possible solution given on the support site, but no luck.
  
  Beside that, I also get a pop-up images that say ' an unhandeled win32 exception occurred in tmadmin.exe [3004]. "
  
  
  Can you please give advice about this.
  
  
  ==========
  Error: -.
  
  073656.DCB - STG-APP3! tmloadcf.4048.1592.-2: 24/04/2012: Tuxedo Version 8.1, 32-bit
  
  073656.DCB - STG-APP3! tmloadcf.4048.1592.-2: CMDTUX_CAT:879: INFO: a new file system is created. (size = 1120 blocks of 512 bytes)
  
  073658.DCB - STG-APP3! tmloadcf.4048.1592.-2: CMDTUX_CAT:871: INFO: E:\psoft\PT848\appserv\CRPROD\PSTUXCFG TUXCONFIG file was created
  
  073705.DCB - STG-APP3! PSADMIN.3964: Attempt to Begin on field CRPROD
  
  073717.DCB - STG-APP3! tmboot.3744.864.-2: 24/04/2012: Tuxedo Version 8.1, 32-bit
  
  073717.DCB - STG-APP3! tmboot.3744.864.-2: LIBTUX_CAT:681: ERROR: failed to create the message queue
  
  073717.DCB - STG-APP3! tmboot.3744.864.-2: FATAL: internal error: CMDTUX_CAT:1098: ERROR: cannot create the queue
  
  073717.DCB - STG-APP3! PSADMIN.3964: Attempt to end boot on domain CRPROD

  If you are using a terminal server server, make sure that you connect to the console on the server session (using mstsc/console or mstsc/Admin, depending on your windows version of the client).

  Kind regards
  Bob

• SOADEMO: How to start the Application BPEL Process Manger Worklist on Linux

  Chapter 3 of the SOA Suite Quick Start Guide tells the user to start the BPEL Worklist Application (step 3.1.1) and lists the instructions that are clearly intended for Windows:
  
  
  
  
  
  < p >
  {color: #0000ff} To start the Application from the list of tasks:
  
  {color} < strong > {color: #0000ff} 1.Select Start & gt; All programs & gt; Oracle - Oracle - soademo & gt; Oracle BPEL Process Manager & gt; Task list application.
  
  
  
  {color}
  
  < facilities > I don't see any instructions for starting the application from the list of tasks in a Linux environment. I found nothing like the screen "BPM Worklist" indicated in the Guide: I can access a page 'BPEL Control' from the homepage of SOA demo, but this page doesn't seem to be something like the screen BPM Worklist documented in the Quick Start Guide.
  
  
  
  Can someone help me out here? Thank you.
  
  
  
  
  
  
  
  
  
  
  
  < /p >

  Hello

  Try:

  http://host/int integration/worklistapp /.

  Best regards, Ronald

• When I use choose the partition Windows in MAC, it gives me an error code 0 x 0000225.

  When I use choose the partition Windows in MAC, it gives me an error code 0 x 0000225.

  I installed everything windows 10 on my macbook pro with the 2013 retina is ready, but the computer goes to windows it gives me an error, it tells needs me to be repaired

  need some help please and sorry I don't have a good English

  

  It gives me this error

• My acer aspire one does not start. the scrolling windows screen, then screen turns off. logon appears and resets, sys

  My acer aspire one does not start. the scrolling windows screen, then screen turns off. but after a long time (45mins) the login screen appears and d sysytem restarts. I have a multi boot with 2 installations of xp, and this happens with both bones. not able to access my sys to bak - up also. all f8 options were considered, but no use.

  I have some bad sectors on d: (have total 3 drive partitions c:, d:, e: with xp on c: and e :))
  the sys wud show a blue screen and reboot when certain file wud b accessible on d:... now the sys cannot start all... pls help...

  Hi Srimotu,

  ·         You get an error message or an error code?

  ·         Have you made changes on the computer before this problem?

  Follow these methods.

  Method 1: Try starting it in last known good configuration.

  http://support.Microsoft.com/kb/307852

  Method 2: Try to start in safe mode.

  http://support.Microsoft.com/kb/315222

  If you are able to boot into safe mode, try a clean boot.

  http://support.Microsoft.com/kb/310353

  Note: After the clean boot for troubleshooting, return the computer to a Normal startupmode.

  Method 3: Disconnect external devices such as printer, scanner, etc. and try to start.

  Also disable automatic restart in the event of system failure

  http://support.Microsoft.com/kb/307973

• Need help message' w/error Unable to start the s window media Interface. Make sure you have at least WMP10. »

  I downloaded WMP11 to download another program and I get this message ("unable to start the s window media Interface. Make sure you have at least WMP10. »).  This message appears when I click on the new program and it loads.  As soon as it loads the first program screen appears and displays this error message on WMP 10.  When I click ok it goes, but I can't get the new program to do anything.

  So before asking on the problem of new program, I would like to fix this so it keeps popping up.
  I'm not too calculates saavy so I need clarification.

  Thank you

  Where did you downloaded WMP 11?

  Uninstall WMP 11 and check again the issue. If it stops then reinstall WMP 11.

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Windows-Media-Player/11

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=8163

• Windows cannot start the service windows firewall

  My windows Security Center indicates that "the windows firewall is disabled.  When I try to turn it on I get the message "windows is unable to start the service windows firewall."  Any suggestions?

  Hello

  The answer depends on what you have anti-virus security.

  If you have, for example, Norton Internet Security protects your computer, it is using Firewall from Norton.

  If you have 2 firewall of exploitation, which can cause system hangs, slow, etc.

  What Antivirus do you use for computer security?

  If you don't have a Suite of Internet security, protect your computer, scan for Malware:

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware, if necessary in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  And here's how to go in Safe Mode options; Select safe mode with networking from the list of options:

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  See you soon.

• Losing the application window in the passage of several single screen monitors.

  I'm having a problem in windows 7 on my laptop when I spent several monitor to work to a single monitor at home because I was running spread on 2 monitors applications seem to leave orders I had open on the second monitor not visible when I switch to the single monitor at home and reopen the app. Is there a function I need to run to get these missing controls reappear on the single monitor.

  If you move the application to the main screen window before closing, it opens on the main screen next time.

  If the application window is on the wrong monitor, you can move:

  1. place the mouse on the icon of the application in the task bar, so that the preview of the window appears above it.
  2 right click on the preview of the window.
  3. If the word move is dimmed in the menu, click restore , and then right click on the preview again.
  4. click on move .
  5. press and hold down the left arrow key to move the window to the main screen.
  6. press enter .

  Boulder computer Maven
  Most Microsoft Valuable Professional

• Cannot start the application - error code 8

  I'm running one of my own apps and I get this message:

  "Cannot start the application - error code 8.

  What is the error code 8? Where can I find a list of all error codes?

  Thanks in advance

  If you get error 8 or 13, and that everything you did is OK for this:

  -Uninstall all versions of your application

  -Restart the playbook

  -Install and run again