Start the camera in manual mode?

Similar Questions

• Re: Could not start the camera on Satellite P300

  I have a Satellite P300 and I use Windows Vista. In recent weeks one have a problem starting the camera. I always get the message

  CEC_Main.exe does not work

  I need help.

  Thank you

  Have you tried to reinstall the webcam software?
  Latest version, you can find on the download page of Toshiba - http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp-

• BlackBerry classic classic blackBerry impossible to start the camera

  Hello. My camera was working fine but all of a sudden when I try to use it it says could not start the camera. The flashlight is not working either.

  1. reboot or restart classic.

  Try them both:

  Restart: with the phone smart BlackBerry power on, press on and press and hold the power button on top about 20-30 seconds, ignore the 3-2-1 timer and hold the button until the screen goes black and you see the red LED.
  or
  Reboot: with the BlackBerry device turned on, using the keys of volume of the edge side, press and hold both the Up and volume keys for about 20 seconds, ignoring the original message of screenshot... the screen go black, reboot.

  2 the camera and a flashlight are still not working, download it from BlackBerry World app BlackBerry virtual Expert and follow the instructions to run the test of the camera and a flashlight.

  Virtual expert from blackBerry - BlackBerry World

• BlackBerry Smartphones could not start the camera

  When you try to start the camera, I get this message... Could not start the camera.  Close other applications and try opening the camera again.

  I have nothing else other running the phone itself is waiting for a call.  I can't find anything on the Blackberry support for the same problem unless I'm missing it.

  When I got on the phone a few months previously, it worked fine and I could send pictures, now he's stuck.

  Thanks for any help.

  CB

  Hello

  It's worth a try:

  Go to the OPTIONS - ADVANCED OPTIONS - HOST ROUTING TABLE click here to enter, then the menu button to register now.

  You will receive an email for verification.

  Remove the battery while the device is activated, replace after one minute,

  Let the device reboot 1-3 minutes, try again the camera. Please let me know! Thank you

• Satellite A200 - once installation of Karspersky cannot start the CAM software

  Guys I need help...

  I have download the Karspersky antivirus 2009 and I install on my Toshiba Satellite A200-gs1 psaece
  He acknowledged the cec_main.exe as virus and block...
  I put it in the exclusion list, it does not continue the works, and when I started my laptop it said «cannot run cec_main.exe...» ».

  I remove the program and install it again I ve put again to the exclusion list.
  Now it's the turn of say on your camera when I m running my cam program.
  I put t know what I should do...

  Here is the cure:
  Probably a good idea to go to Toshiba and download the latest version of the software for the camera to your computer. Do not open this software. Go to the control panel and remove the existing camera Assistant software. Open the Kaspersky software and click settings then click threats and exclusions under the Options tab. Click on the zone of confidence. Click on approved Applications. If CEC_MAIN.exe exists, delete it. Restart the computer.
  May be a good idea to delete your internet cable because we do a right-click on the Kaspersky shortcut and click PROTECTION of PAUSE. This is a must! Probably best to set for a 10 minute break. Close this menu and then open Kaspersky. Go to settings > threats and Exclusions > Trusted Zones > objects > Add + > and type in manually or copy and paste the following text exactly as shown below:

  C:\Program Camera Assistant Software for Toshiba\CEC_MAIN.exe

  exclusionary rules, to allow CEC_Main.exe to be a trusted application. Then reinstall the software assistant camera. Kaspersky should always be in pause mode, but will let you know maybe CEC_MAIN.exe to contain a virus.
  Ignore, but look for the option on this same screen that will allow you to add this as a trusted application. It's the key to this... Kaspersky should be paused during the reinstallation of the software. Once you tell Kaspersky to add this as a trusted application, your installation should be completed. REBOOT and the problem is over.

• Goal opening on-line evolution of the view in manual mode

  I just bought a 135 the opportunity and have noticed on 2 occasions that the aperature will start auto-adjustment in Live View mode, I increase or decrease the exposure. The device always said openness is 2.0 and it always makes the wide-open image... but wiew live will obviously be stopped down. The first time he did it, I turned the camera then next turn, and it has ceased to be. I then cleaned the lens a little contacts with a pencil eraser. The second time, he did it, I twisted the lens and then turn it on again, and he stop doing that.  I think so at this point it's a matter of lenses, but I was wondering if anyone has had a similar problem? The camera is a Canon 5 d Mark III.  When I press the DOF button it switches open toward the great aperture, but only when it is pressed (as it is supposed to). When I let him go, Live View returns it is stopped down to view, at the bottom left, he always says '2.0 '.  Live view should always stay in a wide open aperture, no matter what camera settings, correct?

  It's as if the camera is self-adjustment opening to keep the Live view of overexposing / exposure. Y at - it a setting of the camera that I don't know of?

  Thank you for reading...

  It is the simulation of exposure, not changing opening.

• "camera" always bring up the camera in auto mode higher

  not like camera app that brings the camera with the previously selected mode, the camera button, always raise camera with superior auto mode.

  not convenience, certainly need to work in harmony?

  Here's how it works, more likely to be able to take snapshots of something you see. Manual mode will no longer to save the photo. In any case, it was sent to sony several times.

• How to start the camera in a DPS page

  I try to get readers to take and send pictures in a page Adobe DPS, the iOS and Android. Y at - it a solution? John

  DPS supports the camera via a JS API which is implemented in the playback mode.  Unfortunately, such a solution does not exist on Android.

  More info on that here, as well as some examples of content that you can try yourself.

  Getting started with the camera API | Adobe Developer Connection

  It requires javascript coding expertise, to use the read API Javascript from DPS, but what you're asking is at least possible, on iOS.

• Elite X 3: X 3 start the camera

  Hello. Is there a a way to open the unit without connecting it to the lock screen?
  
  Is there a button on the camera, which acts as a shutter button?

  Hello Kar1o,

  No, I mean the menu down. It should contain camera, sign of Windows, search.

  If you tap the camera symbol then it vibrates and after a second or two it starts to vibrate again. then release the button and the camera will start without authentication.

  Sorry for my confusing tip.

  Concerning

  JoeTec

• Satellite Pro A300-1E7 - cannot start the cam software

  I bought the Satellite Pro A300-1E7.
  Webcam does not work in MSN messenger video call.
  Will have problems similar to the previous posting, except that I use Zonealarm.

  I think that Zonealarm has disputed cec_main.exe in a similar way.
  I tried to follow the instructions here, but without much success.
  I removed the Camera Assistant SOftware and re-installed the driver but does not seem to have improved things.
  Now c:\program files\ software of camera for Toshiba assistant has completely disappeared and the Panel camera assistant no longer appears on the side of the desktop.

  Any ideas please?

  Hello

  I used the Zonealarm happened and I was not really satisfied, because this software locked everything and most of the applications didn't work properly even after the new configuration! Finally, I removed this software and I noticed more advantage. my laptop starts much faster!
  I think this software would lock the cam software too.

  > Now c:\program files\ software of camera for Toshiba assistant has completely disappeared and the Panel camera assistant no longer appears on the side of the desktop.
  This means that the software has been removed and is not installed correctly.
  But to be sure, check in Control Panel-> Software (Add & Remove Programs) if the webcam is installed.

  I have the internal cam of Chicony too and it s works well as part of the software Skype. I didn't test t MSN but I don t see serious reasons why it shouldn't t work.

  In my view, you must first remove the zonealarm. Then clean the OS using CCleaner. Finally, redownload the webcam software and reinstall it!

  The toolbar of the webcam is not always visible on the desktop.
  It seems that if you move it the mouse cursor to the place where the webcam tool bar was hidden.

• off frequency message error when start the computer in normal mode

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hey pamyres

  you say not what led to what happens

  You must give information here to get help

  try a restore of the system in safe mode before your problem

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Walter, the time zone traveller

• BlackBerry 8350i smartphones could not start the camera

  When you try to use the camera on the new 8350i, I get an error message stating "unable to DΘmarrer the camera. Close other applications and try opening the camera again", even if other applications are closed.

  Ideas?

  Reset the device, take out the battery for 30 seconds and install it again.

• Cannot defragment the hard drive AND cannot start the computer in safe mode

  I have been unable to defragment my hard drive because it tells me that chkdsk /f planned.  I tried manually works in command mode nothing works.  I was advised to try to start up in safe mode, but when I do that all I get is a screen of command lines, and my computer freezes there.  What I'm doing wrong and what I can do differently?

  If you try to defragment a volume and see a message like this:

  Disk Defragmenter has detected that Chkdsk is scheduled to run on the volume: (c :))
  Please run Chkdsk /f.

  This means that the volume (disk) that you want to defragment was marked 'dirty' XP.

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a working CD/DVD (internal or external) drive?

  You have a genuine XP installation CD bootable, which is the same Service as your installed Service Pack (this is not the same as any recovery CD provided with your system)?

  You can check the status of your bit of impurity from a command prompt window.

  To do this, click Start, run and enter in the box:

  cmd

  Click OK to open a command prompt window.

  For example, to query the bit of impurity on drive C, type:

  fsutil dirty query C:

  The sample output:
  Volume c is dirty
  Volume C: is dirty

  Is the volume of your sale or it is not dirty?

  The only way to disable the on a volume's dirty bit is to run chkdsk with error correction.

  You can click on start, run and enter in the box:

  Chkdsk /r

  Click OK and answer Yes to schedule the chkdsk next time XP restarts, restart your system and keep your fingers crossed that the chkdsk /r clears the dirty bit (you may need to run once or twice).

  If who disobeys, then you will need to start in the XP Recovery Console and run the chkdsk /r from there.

• Cannot start the system in safe mode - F8 no response

  Try to get to SAFE mode reset earlier date (profile does not load), but by pressing or hit F8 during the power upward has no effect and portable continuous screen PW rather than presenting the start menu (where I can choose to boot in safe mode)

  You can enter BIOS with F2 at startup?

  You may have turned on option quick start?
  

• start the computer in safe mode

  hard drive detected problem iminent failure press F1 key to continue... After pressing F1 computer won't start in safe mode

  so I check apparently I solve the problem. I run a system check and all is fine... I reboot my computer and I get: problem hard drive detected iminent failure press F1 to continue... boots up in safe mode only... the changes ive made did nothing because when the computer reboots, it starts again in SafeMode only. but with the networking and database drivers and the DCs as startup options. nothing seems to stick to restart the computer for the changes to take effect.

  Hello

  'problem detected hard disk iminent failure '.

  The hard drive is faulty

  Back up your data > buy a new hard drive > reinstall the operating system.

  To be sure, this is the problem do the following:

  Go to the website of your computer manufacturer > find specifications of hardware in your computer (hard drive) > access the Web Hard Drive from the manufacturer site > download their diagnostic software > make a Bootable disc > test your hard drive.

  See you soon.