Start the WebLogic, the NodeManager and ManagedWebLogicServer (oam_server1) Server

Similar Questions

• How can I start the BI and ODI Managed Servers?

  Well,.

  I read at step 4 of Doc-ID 1589540.1 the following:

  "BI applications requires the BI and the ODI Managed Servers (bi_server1 and odi_server1) should be started via the node Manager. This setting is required for settings, memory, and jvm arguments are correctly defined.

  Starting not not the BI and managed servers of ODI can lead to memory problems and the loss of functionality BI Applications Configuration Manager, the Manager of functional installation and ODI.

  To ensure that the BI and ODI Managed Servers are started through the node Manager, start using the Console of Administration WebLogic user interface.  Do not start the BI and servers managed by ODI by using the managed server start script. »

  Well, as I'm new Weblogic management, then, what are the steps to start all of the services?  (I have OBIEE, ODI and Bi Apps on the same server).

  I mean, was that you should not start their script. What is the proper sequence and how should I do this?

  Could someone help me on this?

  Thanks in advance...

  the appearance of the home screen for environment-> servers-> here you will see the admin and managed servers-> click the tab control and then check off the boxes related to managed servers, and then click start that's all

• Will not install driver installer of EPSON Scan (L210) - ' error occurred when installing re start the computer, and then try again.

  Original title: problem installing scanner

  EPSON Scan (L210) setup driver moved - "is an error occurred when installing re start the computer, and then try again.

  Hey there, MAHIPALSINGH143

  Welcome to the Microsoft community forums.

  So that the community help to install your printer, we will need more information. Please answer these questions:

  1. Windows what operating system are you running (Windows 10, 8.1, 7)?
  2. The troubleshooting steps have so you far?
  3. Did you upgrade to a new operating system?
     1. If Yes, what operating system you were on before?

  When you look at the error message, it doesn't look like you need to update your drivers. You will need to go on the official website of manufacturers, with your EPSON.

  Here is the site for the EPSON drivers: http://www.epson.co.uk/gb/en/viewcon/corporatesite/support

  When I entered your model of "Epson Scan (L210)" number, it does not recognize the product. Would you be able to check and make sure that you have provided the correct model number? Your model is a new printer?

  Kind regards

• What happens when "Still waiting for network when starting the computer and logon" is enabled and that the computer is not connected to the network?

  In MMC, I created the group policy and found through web search that computers with mapped network drives can connect better if "always wait for network when starting the computer and logon" is enabled...  So far, it has been very nice to have allowed.  Is no longer mapped network drives see the place as disconnected.  But what happens if the computer is not connected to a network?  Say the wireless router will turn off and your computer always 'wait... '. "turned on, should the user could still log the computer timely?

  Check these:
  Troubleshooting intermittent slow connection or slow start of http://blogs.technet.com/b/instan/archive/2008/04/17/troubleshooting-the-intermittent-slow-logon-or-slow-startup.aspx
  Priority and group policy processing
  http://TechNet.Microsoft.com/en-us/library/cc785665%28WS.10%29.aspx

• My email is unable compact my mails, it starts the process and then stops.

  My email is unable compact my mails, it starts the process and stops, any help

  Try to manually compact with my Windows Mail utility (www.oehelp.com/WMUtil/) and see if it works.  Also check interference antivirus (see www.oehelp.com/OETips.aspx#3).

  Steve

• How to stop the blue e screen to start the computer and also if you try to download anything

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  How to stop the blue e screen to start the computer and also if you try to download anything:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello

  We need numbers BBCode or Code to stop the bluescreens and utilities below will help you
  provide us information. Also the methods here can help you solve the bluescreens.

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the info from the blue screen that would be
  Help. Such as ITC and 4 others entered at the bottom left. And any other information such as STOP error
  codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  Displays information on all the "crash" of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged drivers, video drivers in particular, but there are other causes.

  You can follow these steps in the Safe Mode if necessary or the command prompt Vista DVD or Options of recovery if your
  system installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, 3rd party keyboard and
  smile, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Driver EPSON Scan Setup installs - "error produced during installation to re start the computer, and then try again.

  New Epson Scanner GT - S50 Epson scan, set up driver will not install. keeps giving me "is an error occurred when installing re start the computer, and then try again" works fine on another pc with windows 7, but not from Dell. Tried to download from the website and cd. all other software is loading fine. Epson technical support cannot fix. Help!

  I finally had my Epson GT - S50 working. I have a contract with support iYogi.They tech were recommended by Dell.  It took them more than 12 hours to solve this problem. They had to do a full factory reset. I have had all my drives. The alleged problem with mine was HP. I have a hp all-in-one. It damaged my windows files. On re install, I had to install Epson scan first, this hp. I would not buy an epson again. The product works well now but still double flow a lot and is very picky. When it works well, it really accelerates my work verse scan with the Hp all-in-one. I'm really happy that I have a scanner, but wouldn't recommend an Epson.  I highly recommend I have Yogi tech support. They are worth every penny.

• Windows could not start the IKE and Authip IPsec keying service modules on the local computer. Error 1075 the dependency service does not exist or has been marked for deletion.

  Hi, I'm trying start the IKE and AUTHOP service from the SERVICES screen but I get this error:

  Windows could not start the IKE and Authip IPsec keying service modules on the local computer.  Error 1075 the dependency service does not exist or has been marked for deletion.

  original title: ike and authip error 1075 the dependency service does not exist or has been marked for deletion

  Hello

  Remember to make changes to the computer before the show?

  You can follow the below methods:

  Method 1: Restart Windows and try to start the Security Center service.

  If you still receive the same error, make sure that the WMI service is launched and running:

  (a) click Start, run , and then type Services.msc

  (b) double-click Windows Management Instrumentation

  (c) set its startup type to Automatic

  (d) click Start to start the service, and then click OK

  (e) restart Windows.

  Method 2: Restart the service

  Windows logs an error if the service IKE and AuthIP IPsec Keying Modules or the driver does not start, or suddenly, they end.

  To restart the IKE and AuthIP IPsec Keying Modules service:

  To perform this procedure, you must have membership in the local Administrators group, or must you have been delegated the appropriate authority.

  (a) restart the service. You can do this from a command prompt or in the snap-snap-in Services Microsoft Management Console (MMC). Do one of the following:

  ·         Start an administrative command prompt. Click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. At the command prompt, run the command net start ikeext.

  ·         Click Start, type services.msc in the Search box and press ENTER. In the column name of the Services snap-in, right-click on IKE and AuthIP IPsec Keying Modulesand then click Start.

  (b) if the attempt to restart the service fails, restart the computer. This forces all related and dependent services to restart.

  (c) if the error persists after restarting the computer, then the executable files for the driver or service may be damaged, and the operating system must be reinstalled.

  Note:

  You can check that the IKE and AuthIP IPsec Keying Modules (IKEEXT) service runs by using the Component Services Microsoft Management Console (MMC) or the net start command line tool.

  You can check the link: http://technet.microsoft.com/en-us/library/cc733299 (WS.10) .aspx

  Method 3: Run a scan of the System File Checker.

  http://support.Microsoft.com/kb/929833

  It will be useful.

• How to start the database and servers after the installation of the Webcenter JSK Portal

  Hello

  I finally installed the portal WebCenter using JSK, after it turned off the machine, I don't know how to start the database or server, I need to set the environment variables? create the oracletab file? or is it a file .sh to start the database and servers?

  Any help will be great!

  Best regards!

  Thanks Françoise-Oracle for your response

  As you say, I need to go to /WCPortal_JSK_Linux.x 86-64/linux64, I found all the scripts that I needed to start or stop a server or database. But more especially if you run evertything, (I did) you just need to run the de./startup.sh script and wait, he'll run, but take some time.

  Best regards!

• just paid for Photoshop, but it allow me to download. It starts the download and then a message pops up saying error code 50. How can I fix?

  Just paid for Photoshop, but it allow me to download. It starts the download and then a message pops up saying error code 50. How can I fix?

  Please refer to:

  Error code 50

  Error code 2 or error code 50: desktop application Adobe Creative cloud could not be updated

  Error "Unable to install" received when installing Adobe Creative Cloud desktop application

  Concerning

  Stéphane

• I just want to start the program and photo editor. [was: lost]

  I just want to start the program and photo editor. Why am I so lost?

  Exactly my point of view. With all the 'training' and 'introduction' and promotion

  hype about the CC platform, I couldn't even find a way to LAUNCH photoshop.

  Finally I just downloaded Photoshop Elements. Problem solved.

  Your partner in development

  Robert Ott PMP

  Earth Energy Exchange, Ltd.

  631-371-6842.

• I tried several times to set up an email account with Thunderbird, but the next time I start the computer and start Thunderbird, no account is displayed.

  I bought a new desktop PC with Win 8.1 and installed Firefox and Thunderbird.
  Then, I tried to set up the e-mail account manually (in IMAP) following the instructions here: https://support-en.upc-cablecom.ch/app/answers/detail/a_id/22 , but can't set the mail server outgoing smtp correctly (I could receive mail but not send them). Subsequently, I deleted this account. Then, I started the automatic mail with UPC Cablecom under the http://www.upc-cablecom.ch/content/dam/www-upc-cablecom-ch/Support/executables/upc-cablecom-email-assistant.exe link tool and he did successfully set up the account, however, because a POP3 server account. As I was not happy with it, I deleted the server of incoming POP3 mail (and lost the e-mails received, of course...) and retried a manual installation. In doing so, I got an e-mail account IMAP incoming more two outgoing SMTP server (comparing them, I also understand the configuration error that I had done the first time). I then deleted the manual as SMTP server the automatically the installation server worked correctly.
  In this context, accepting them and sending E-mail worked OK. However, the next time I started the computer, the e-mail account disappeared and Thunderbird was asked to set up a new account again. I have successfully set up manually once more, but the same problem resurfaced at the next startup, the e-mail account was gone...!

  Thank you in advance for your help!
  Maxonce

  Verify which profile is used.

  AppMenu button - help - troubleshooting - profile directory - Open Directory information

  Your profile folder should open in Windows Explorer. What is the location of the profile?

  Restart your computer and repeat the steps above. The profile folder has changed?

• Firefox does NOT start, the removal and resettlement will start as the last step, but once Firefox is closed, it does NOT restart.

  Both browsers (Firefox 21 & IE) installed on my Widows XP 64-bit office refuse to start or click the icon on the desktop, the start menu bar or the executable files themselves. What happens is that all the icons disappear from the screen for 15-30 seconds, then the icons appear on the screen, and the last information message displayed from the system tray at the beginning upward is repeated.

  Firefox deleting and reinstalling will start the browser as the last step, but when the new copy is closed, it will not start. Also just restart the download installation without removing Firefox will be 'Upgrade' and start in last step, but when the new copy is closed, it cannot be restarted. Restore running on the new copy has apparent effect on the ultimate inability to restart after closing.

  I've only tried the Internet Explorer browser after being unable to start Firefox (its only usually used by States to update procedure) and have not studied either reinstall or repair.

  Did you use programs that I listed? All anti-malware programs to detect different things.

• start the menus and options of start

  I have TouchSmart IQ505. Windows 7 and upgrade to Windows 8. Everything seems to work very well. My HP printer to work, all my programs installed and work very well.

  The only case I'm having is when I try to start the installer or diagnose the mode using the function (F8, F10 ect) keys after starting. It continues just to Windows.

  Maybe the reason recovery F11 does not work, it's the recovery partition disappeared.  Once the computer is running the Windows 8 sees the paprtition of recovery?  The F8 key is (in previous versions of Windows) to enter in the 'safe mode' Windows 8 does not use this feature, see here: http://www.techspot.com/news/48718-windows-8-removes-need-for-f8-key-advanced-boot-menu-redesigned.html

• I'm getting error .exe - image incorrect when I start the computer and click on anything

  I keep on getting error bad .exe continuous Image on my Windows XP machine. Help, please

  Hi leondsouza,

  1. What is the exact error message that you receive?

  2. did you of recent changes on the computer?

  3. do you have security software installed on the computer?

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.