Start up does it all the time!

Similar Questions

• 'Logical disk manager' found at the start of Win xp all the time

  Hello, all the...

  I get a 'logical disk manager' found to boot Win xp message all the time on start or restart... 100% of the time.

  I can use all the facilities of the computer from the disk management, but I' like this message to go.

  It is anotebook with a connected external USB drive sometimes. I also use an ethernet to usb tot internet connectivity device.

  Would appreciate a solution.

  Hello

  I suggest you to refer to the following Microsoft article and check if it helps.

  The logical disk Manager Administrative Service hangs as it begins:

  http://support.Microsoft.com/kb/307309

  Warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 (http://support.microsoft.com/kb/322756 )

  Hope the information is useful.

• After you run the workflow in minor data, then the window "start" made its appearance all the time and don't can't stop it

  I installed the oracle11g and configured the SQL Developer minor and the data correctly, but when I run a workflow, the window 'departure' appears all the time, can't walk in the phase of runing and also can not stop. For now, the only thing I can do is to kill the program in the Windows operating system.

  Sometimes, when I kill the program and restart and restart run the workflow, it may be normal.

  So, I would like to know why and how to sovle it?

  Yes, there is a simple solution:

  "To ensure that Workflow tasks Data Miner is visible in your user interface".

  It is the window that displays the list of workflows that were run during the last day, and also all workflows running active and their completion percentage.

  If this window is visible, if it is not blocked from viewing by another tab, then you will avoid your problem.
  If you do not see the window tasks of Workflow Data Miner at all, then go to the menu: Tools-> Data Miner-> make it Visible.

  That should it appears in your user interface, then you should just make sure that it is fully visible.

  SQL Dev 4.0 final version will be released soon, it will be difficult, so this problem is no longer a problem.

  Thank you, Mark

• My Windows mail keep blocking saying an error has occurred and it will reopen its doors again. It does this all the time. Can anyone help?

  A week ago when I go to the various emails in my Inbox, my mail will close and then reopen again.  It just says: an error has occurred and it starts up.  If I do not jump in my email box, it doesn't seem to happen as well but if I want to keep something an email, and then go to another, he stops.

  Try to compact and repair the database.
   
  WMUtil
  http://www.oehelp.com/WMUtil/default.aspx
   
   
  If that does not do it, delete the account, restart and it add.

• My very old DELL does not start all the time. And when that happens, it doesn't look very good.

  Original title: Please help

  I HAVE A VERY OLD DELL LAPTOP THAT WILL NOT START ALL THE TIME, AND WHEN THAT HAPPENS IT LOOKS LIKE SA WORKS VERY HARD!

  I HAVE A VERY OLD DELL LAPTOP THAT WILL NOT START ALL THE TIME, AND WHEN THAT HAPPENS IT LOOKS LIKE SA WORKS VERY HARD!

  It seems that two things must happen... Three if you don't have good backups (it would be the first thing * if * you have not any outside of the machine.)

  (1) the material must be tested.  By restarting and pressing the combination of keys at the right time could test the hard/readers/speed control (CTRL + ALT + D, on a dell computer before starting at startup of Windows.)  For other tests - Dell probably put on a partition or sent a CD with the machine that allows you to perform a battery of tests on the... video, audio equipment, etc.

  (2) a restoration clean install a factory should probably be made * if * hardware testing are in agreement.  You could probably clean the machine by following the steps I'll give you - but knowing no more about the problem that we are so far... If that does not better... it's perception, or something so serious, that a clean install is probably the only real 'next step '.

  (And if the new facility does not solve it and analysis of material found nothing - that's the perception, or something (material) defective which is not be picked up).

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in. Look for whatever it is you do not know usingGoogle (or ask here.) You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory. This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  Do a house cleaning and the dust of this hard drive:

  You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

  Windows XP should take between 4.5 and 20 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/

  Those who can help you discover visually where all space is used. Then, you can determine what to do.

  After that - you want to check any physical errors and fix everything for efficient access"

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Cleaning the components of update on your Windows XP computer

  It is a good idea at this time to ensure that you continue to get the updates you need. This will help you ensure that your system update is ready to do it for you.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on theroot of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update (you * NOT * use the aggressive version):
  How to reset the Windows Update components?

  Reset.

  Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing youpouvez wish to make:

  Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

  If you want, come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end. This isn't 100% necessary - but I'd be willing to bet that you would gain some performance and features in making this part.

• Whenever I start my computer I am able to get to the loading screen, but the computer reaches the login screen it restarts. This happens all the time. It does not matter what I try to start if no failure or normal startup mode

  This happens all the time. It does not matter what I try to start if no failure or normal startup mode. I tried to use the repair from the vista cd. It's 64-bit computer with AMD phenom processor and an Asus motherboard there is a HDD 500 GB and 4 GB of memory.

  you have AVG Antivirus?

  If so, these instructions will fix it: http://forums.avg.com/ww-en/avg-free-forum?sec=thread&act=show&id=94159

  teengeek.freehostingcloud.com

• To work with the text to the assignment by the cursor of the large fragment of page it is necessary to change all the time down, 'against the judgment", but the page automatically does not start to rise upward, as happens in other browsers. I ask you for

  After the transition to Windows 7, there was a problem with Firefox. To work with the text to the award by the cursor of the large fragment of page it is necessary to change all the time down, 'against the judgment", but the page automatically does not ascend to the top as it was earlier, and like that occurs in other browsers. It is necessary to press the other key "down" which is him very troublesome. Resettlement on an earlier version (8.0) earlier irreproachably working, gave nothing. I ask you to help

  You must activate the module bar (Firefox > Options or view > toolbars;) CTRL + /) or find bar to make Firefox scroll the page while selecting the text (Ctrl + F).

• When I opened my Firefox and start typing an address is disspears and when I press the enywhere else it reappears. It happens all the time!

  When I opened my Firefox and start typing an address is disspears and when I press the enywhere else it reappears. It happens all the time! I installed the uprgrade and also did a virus check everything seems ok! I need a solution cause mozilla's browser that fits me better!

  Hello

  Try Firefox Safe mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that temporarily disables hardware acceleration, restores some settings and disables add-ons (extensions and themes).

  If Firefox is open, you can restart Firefox Safe mode in the Help menu:

  • Click the menu button

    

    click Help

    

    then select restart with disabled modules.

  If Firefox does not work, you can start Firefox in Mode safe as follows:

  • On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac: Hold the option key during the startup of Firefox.
  • On Linux: Exit Firefox, go to your Terminal and run firefox-safe-mode
    (you may need to specify the installation path of Firefox for example/usr/lib/firefox)

  When the Firefox Safe Mode window appears, select "start mode safe."

  

  If the problem is not present in Firefox Safe Mode, your problem is probably caused by an extension, theme or hardware acceleration. Please follow the steps described in the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. This might help others with the same problem.

• Computer is very slow and IE does not work all the time.

  I bought a computer from my old employeer.  He is doing all sorts of things, or should I say not to do all sorts of things.  It is very slow and IE does not work all the time.  They have questions arise and ask if the administrator oks things and other things like that.  It came with any disks.  I would like to wipe, clean and load a new disc, but I don't know where to find the disc or if I can do it.   Can someone please?

  Hello

  Proceed as follows to contribute to these two questions. You can probably buy the disks of Vista machine to system or get
  the former employer to do it for you if necessary.

  Try these and it can also be a good idea to update your main drivers later. The General corruption can also play a
  role in this issue. And even the TCP/IP stack might need to be refreshed.

  What antivirus/antispyware/security products do you have on the machine? Be one you ALREADY had on this
  machine, including those you have uninstalled (they leave leftovers behind which can cause strange problems).

  If no joy there's something blocking perhaps.

  Start - All Programs - Accessories - System Tools - IE with no Addons - what works best?

  IE - Tools - Internet Options - Advanced - tab click on restore, and then click Reset - apply / OK

  IE - Tools - Internet Options - Security tab - click on reset all default areas - apply / OK

  Close and restart IE or IE with no addons

  not better?

  IE - tools - manage Addons (for sure disable SSV2 if it is there, it is no longer necessary but Java always install
  "(and it causes problems - you never update Java to go back in and turn it off again)." Search for other possible problems.

  Windows Defender - tools - software explore - look for problems with programs that do not look right. Permit
  are usually OK and "unauthorized" are not always bad. If in doubt about a program to ask about it here.

  Could be that a BHO - BHOremover - free - standalone program, needs no installation, download and run - not all
  are bad, but some can cause your question (toolbars are BHO).
  http://securityxploded.com/bhoremover.php

  Startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  Also get Malwarebytes - free - use as scanner only.

  http://www.Malwarebytes.org/

  --------------------------------

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  --------------------

  Departure - in the search box, type-> order

  at the top of the list to find COMMAND - CLICK RIGHT to it - RUN AS ADMIN

  Type the following commands (or copy and paste one at a time), each followed by pressing on enter.

  ipconfig/flushdns

  nbtstat-r

  nbtstat - RR

  netsh int Reinitialis

  netsh int ip reset

  netsh winsock reset

  RESET

  That resets your TCP/IP stack

  --------------------------------

  Maybe need of these:

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
  video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
  cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
  own the software and drivers and all other main drivers that you have.

  Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
  (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
  updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• Windows Explorer does not work properly and hold all the time

  I have Windows 7 Professional as a platform. In the end, I find windows Explorer does not correctly and hold all the time. Pls advise on how to solve this problem. Note I am not a computer Savvy and I need a step by step approach.

  Thank you for your time and enjoy your time.

  .

  Hello

  Use the startup clean and other methods to try to determine the cause of and/or
  eliminate problems.

  ---------------------------------------------------------------

  References to Vista also apply to Windows 7.

  What antivirus/antispyware/security products do you have on the machine? Include
  everything you've ALWAYS had on this machine, including those you have uninstalled (they
  remains of leave behind which can cause strange problems).

  ----------------------------------------------------

  Follow these steps:

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows
  Vista or Windows 7
  http://support.Microsoft.com/kb/929135

  Use advanced tools to solve performance problems in Windows 7
  http://www.howtogeek.com/HOWTO/6152/use-advanced-tools-to-troubleshoot-performance-problems-in-Windows-7/

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/default.aspx/GP/slow_windows_performance?p=1

  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes without doing anything-
  then right click on taskbar - task manager - take a look at stored by -
  Process - Services - this is a quick reference (if you have a little box on)
  Lower left - show for all users, then check that).

  How to change, add or remove startup programs in Windows 7
  http://www.SevenForums.com/tutorials/1401-startup-programs-change.html

  Is a quick check to see who are loading method 2 - using MSCONFIG
  then after a list of these here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out what files, registry keys, and other objects
  processes have open, which DLLs they have loaded and more. This unique
  powerful utility will show you even owned by each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically
  When your system boots and you connect. Autoruns also shows you the complete list
  locations of registry and files where applications can configure start automatic settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor file system, registry, process, thread and DLL
  activity in real time.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  WhatsInStartUP - free - this utility displays the list of all applications that are
  loaded automatically when Windows starts. For each application, what follows
  the information is displayed: Type of startup (registry/Startup folder), Command - Line
  Channel file, the product name, Version, company name, location in the registry or
  file system and more. It allows you to easily disable or remove unwanted programs
  that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe
  not. The window Watcher says it all, every window created by each execution of the statement
  program, if the window is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Think about it an absolute must - manually update your drivers.

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded
  on your system. For each driver in the list, additional useful information is
  Poster: load address of the driver, description, version, product name,.
  company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit Maker as replacements and system manufacturer of device which are
  the most recent. Control Panel - write - graphics card - device manager
  the brand and complete model of your video card - double click - tab of the driver-
  Note the version information. Now click on UPdate Driver (this can do nothing
  MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard
  If there are 3rd party with their own software and drivers and the other main device drivers
  you have.

  Now, go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restore)
  and site (Realtek, Intel, Nvidia, ATI, for example) and get the manufacturer and device
  their latest versions. (Look for the system to update the BIOS, Chipset and software updates
  Site of the manufacturer here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN -.
  REBOOT after each installation.

  Always check in the Device Manager - drivers tab to be sure the version you are
  installation actually appears. This is because that some rollback of drivers before the
  later is installed (particularly that audio drivers) so install a driver - reboot.
  Make sure that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW to the device makers DO NOT RUN THEIR
  SCANNER - check manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using
  the above methods is preferable to ensure the latest drivers from the manufacturer of system
  and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  If you update the drivers manually, then it's a good idea to disable driver facilities
  in the updates of Windows, which leaves on Windows updates, but it will not be installed
  pilots who are generally older and cause problems. If updates provides a new
  driver then hide it (right click on it) and then go get new ones manually if
  you want.

  Stop Windows 7 to automatically install device drivers
  http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/

  How to disable automatic driver Installation in Windows 7 / Vista
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/

  Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for the)
  Professional, comprehensive and Enterprise edition)
  http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/

  ===========================================

  Refer to these discussions because many more excellent advice however remember to check
  your antivirus, the main drivers and BIOS update programs and also to solve problems
  with the first method cleanboot.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Button to navigate to another page does not not work properly all the time.

  Hello

  I'm just starting to explore the ADF, I use Jdeveloper 12.1.3.0.0 and integrated weblogic server that comes with the IDE.

  I just created a simple application with a welcome page called Main.jsf and then 2 task bounded, streams called SearchStudentsFlow and Studenloansflow, each workflow has a jsf page. The home page has a single button that sends me to the first task flow, SearchStudentsFlow and I can see is the page in that workflow, AwardsSearch.jsf. Also in the AwardsSearch.jsf page I have a button that takes back me to the home page.

  The first problem I have is that when I run the application starting at the home page button in the works of the great homepage the first time, the button send me to the AwardsSearch.jsf , but once I decide to go back to the homepage and then click on the button to go to the first task flow the button does nothing. This happens whenever I decide to return to the home page of any page in my project.

  Also, I copied the entire previous project into a new project and I decided to use the ADF security infrastructure in this new project to create a log in page create users and give them different roles and levels of access.

  I created some users who have access to all pages and all the streams, but when I run the application starts the login page and I login successfully and go to the home page, the button on the home page does not work.

  
  

  I don't know why the button sometimes works, but not of others and also I do not know why when I use the login page, the button doesn't work. I don't know if these 2 problems are related or not.

  
  

  This is my code in the homepage:

  <?xml version='1.0' encoding='UTF-8'?>
  <!DOCTYPE html>
  <f:view xmlns:f="http://java.sun.com/jsf/core" xmlns:af="http://xmlns.oracle.com/adf/faces/rich">
      <af:document title="Main.jsf" id="d1" binding="#{backingBeanScope.backing_Main.d1}">
          <af:form id="f1" binding="#{backingBeanScope.backing_Main.f1}">
              <af:panelGridLayout id="pgl1" binding="#{backingBeanScope.backing_Main.pgl1}">
                  <af:gridRow marginTop="5px" height="20%" id="gr1" binding="#{backingBeanScope.backing_Main.gr1}">
                      <af:gridCell marginStart="5px" width="34%" marginEnd="5px" id="gc1"
                                   binding="#{backingBeanScope.backing_Main.gc1}">
                          <af:image source="/images/NU_Logo_purple.jpg" shortDesc="Northwester University" id="i1"
                                    binding="#{backingBeanScope.backing_Main.i1}"
                                    inlineStyle="width:293px; height:197px;"/>
                      </af:gridCell>
                      <af:gridCell id="gc3" binding="#{backingBeanScope.backing_Main.gc3}" width="33%"/>
                      <af:gridCell id="gc4" binding="#{backingBeanScope.backing_Main.gc4}" width="33%"/>
                  </af:gridRow>
                  <af:gridRow id="gr3" binding="#{backingBeanScope.backing_Main.gr3}" height="10%">
                      <af:gridCell id="gc5" binding="#{backingBeanScope.backing_Main.gc5}"/>
                      <af:gridCell id="gc6" binding="#{backingBeanScope.backing_Main.gc6}">
                          <af:button text="Search Awards" id="b1" binding="#{backingBeanScope.backing_Main.b1}"
                                     action="goSearchAwards"/>
                      </af:gridCell>
                      <af:gridCell id="gc7" binding="#{backingBeanScope.backing_Main.gc7}"/>
                  </af:gridRow>
                  <af:gridRow marginTop="5px" height="70%" marginBottom="5px" id="gr2"
                              binding="#{backingBeanScope.backing_Main.gr2}">
                      <af:gridCell marginStart="5px" width="100%" marginEnd="5px" id="gc2"
                                   binding="#{backingBeanScope.backing_Main.gc2}"/>
                  </af:gridRow>
              </af:panelGridLayout>
          </af:form>
      </af:document>
      <!--oracle-jdev-comment:auto-binding-backing-bean-name:backing_Main-->
  </f:view>
  

  And this is my code in the adfc-config. XML

  <?xml version="1.0" encoding="windows-1252" ?>
  <adfc-config xmlns="http://xmlns.oracle.com/adf/controller" version="1.2">
    <view id="Main">
      <page>/Main.jsf</page>
    </view>
    <task-flow-call id="SearchStudentsFlow">
      <task-flow-reference>
        <document>/WEB-INF/SearchStudentsFlow.xml</document>
        <id>SearchStudentsFlow</id>
      </task-flow-reference>
    </task-flow-call>
    <control-flow-rule id="__3">
      <from-activity-id>Main</from-activity-id>
      <control-flow-case id="__5">
        <from-outcome>goSearchAwards</from-outcome>
        <to-activity-id>SearchStudentsFlow</to-activity-id>
      </control-flow-case>
    </control-flow-rule>
    <managed-bean id="__4">
      <managed-bean-name>backing_AwardsSearch</managed-bean-name>
      <managed-bean-class>view.backing.AwardsSearch</managed-bean-class>
      <managed-bean-scope>backingBean</managed-bean-scope>
      <!--oracle-jdev-comment:managed-bean-jsp-link:1AwardsSearch.jsf-->
    </managed-bean>
    <managed-bean id="__2">
      <managed-bean-name>backing_Main</managed-bean-name>
      <managed-bean-class>view.backing.Main</managed-bean-class>
      <managed-bean-scope>backingBean</managed-bean-scope>
      <!--oracle-jdev-comment:managed-bean-jsp-link:1Main.jsf-->
    </managed-bean>
  </adfc-config>
  

  No idea why the button does not work correctly all the time?

  Thanks in advance

  Play well!

  Now, we understand the problem and can help you solve it.

  The problem is that you dropped the home page in the flow of student loan and place you thinking that you must return to the point of departure, the unlimited workflow. Actually, you don't the sheet flow loan student but simply see the homepage as part of the loan flow. The navigation rules remain those defined in the flow of student loan. Now, when you click on a button to jump to the stream of research, the target is undefined zed you simply stay on the same page, the home page.

  To make your work use case, you set a return action in the flow of student loan that return to the caller, the flow of research which, in turn, will return to his name the workflow without terminals that hold the homepage. Remove the homepage of flow of charge to students. The case of navigation allows to navigate between the button and the new return action.

  In the adf of flow research a wild-card rule that accesses the return operation sends the return flow to the home page. You must remove the sailing time pointing to research prices for the return operation because it can use the same rule of navigation of wild-card then. Then, you add a Bach student load flow navigation rule to the scholarship search page. This navigation is used for the return actionto_searchStudents.

  Timo

• I have iphone5s and my contact id does not work, all the time he show faild Setup touch id please help?

  I have iphone5s and my contact id does not work, all the time he show faild Setup touch id please help?

  Hi yjain51,

  I understand you had some problems recently with getting Touch ID to work reliably on your iPhone 5s. I know that it is a feature of great security for your iPhone, so I'm happy to help you.

  When you use Touch ID, make sure that your hands are free of any dirt or moisture so that fingerprints can be read clearly. This article explains further:

  Use the ID Touch on iPhone and iPad - Apple Support

  Thank you for using communities Support from Apple. See you soon!

• small circle turns / page does not load / triangle problem is almost all the time

  The small circle of connection lights up and turns anything - whether through a bookmark, email, a typed in the address. He runs and runs, then twice or says problem loading page ALMOST all the time (I can't understand our why or why not). I just downloaded the latest versions of Firefox and Thunderbird. I check my AVG and Firefox has a clear pass.

  It is possible that your security (firewall, antivirus) software blocks or limit Firefox or the process of plugin-container without you inform, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox and the plugin-container in the permissions list in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.org/KB/server+not+found
  • https://support.Mozilla.org/KB/firewalls
  • https://support.Mozilla.org/KB/fix-problems-connecting-websites-after-updating

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do NOT click on the reset button on the startup window Mode safe or make changes.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  Create a new profile as a test to see if your profile is the source of the problems.

  See "create a profile":

  • https://support.Mozilla.org/KB/Profile-Manager-create-and-remove-Firefox-profiles
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues

  If the new profile works then you can transfer files from a profile in the new profile, but make sure not to copy corrupted files.

  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

• Send an email using mail my signature seems to drop before my email is considered by my beneficiaries. This does not happen all the time but often. Is anyone else know / encountered this problem? If, kind of help to rectify this please.

  Hi, when you send an email using the mail my signature seems to drop before my email is considered by my beneficiaries. This does not happen all the time but often. Is anyone else know / encountered this problem? If so help to rectify this would be greatly appreciated please. Thank you

  It is up to the recipient how their e-mail is displayed. For example, if you include html or an image in your email the recipient may set up their customer e-mail to not display html or images. You have no control over the way a recipient chooses configure their e-mail client.

• My screen saver does not work all the time, usually this seems to happen once the aircraft stopped in the energy saving mode.

  Original title: my screensaver does not work all the time

  My screen saver does not work all the time.  First time I have turn on computer, it works OK.  Later in the day, this isn't.  Usually, this seems to happen once the aircraft stopped in the energy saving mode.  After the reactivation of the computer (do not), the screen saver does not work when it should. How to run all the time?  I am running Kapersky Internet Security 2011.  This would be closed by the screen saver?
  Thanks, Garybuyit

  Hi garybuyit,

  Thanks for posting your question in the Microsoft answers Forums.

  Just so I'm clear, updated you the graphics cards in Device Manager? You have access to a Windows XP installation disc. If so, follow the steps in this document to make a scan of the SFC. This analysis will attempt to repair or replace any missing or corrupted system files.