Start Up manager does not start

Similar Questions

• Display Manager does not start after Satellite A210-117 wakes up from his sleep

  Hello

  I have some difficulty with a Satellite A210-117 PSAELE-00E00MFR. I installed W7 x 64 professional and display driver ATI Catalyst to Radeon HD 2400.

  My graphics card appears in Device Manager as an ATI Mobility Radeon HD 2400 with the current version of the driver 8.970.100.3000 from AMD, and I can't find a better.

  So far, so good, but as soon as W7 goes into 'sleep' or 'hybrid sleep', the display manager does not re - start correctly. He keeps trying to display Windows, but finally the phone re boots.
  But if I put the laptop to 'Hibernate', then he wakes up fine.

  I don't know if this problem is known, because I can't find anything on the Internet on this subject independently to obtain the latest driver. Anyone an idea how to solve this problem?

  Thanks in advance

  Concerning
  Eric

  Post edited by: ebouge

  Hello

  On the page of the Toshiba UE driver (Archive), you will find drivers for Win 7 32 bit A210.
  Driver ATI 8.452 - 080109 is available too.
  Its a previous version and I recommend to test the unit by using this version of the driver

• The Task Manager does not start. I get a message "task manager has been disabled by your administrator".

  Original title: I deleted a virus from my computer but the Task Manager does not start.  I get a message "task manager has been disabled by your administrator".  Can someone tell me how to fix this.

  Task Manager

  Too bad!  I thought about it.  It has been disabled in the registry.

• the Task Manager does not start

  My laptop started running very slowly and I can't seem to start the Task Manager. Ctrl alt delete gives me the opportunity to start that I chose, but I don't get an inactive icon in my toolbar. I am running vista Home basic with service pack 1. When I restart or stop the laptop hangs at logging off-page. I also noticed that some of my applications/startup process are not start or appearing in my toolbar. I initially had Bit defender as my anti virus - but he exchanged for computer related. I had the problem with both.

  Hi Omanianne,

  Please read the following article from Microsoft Help on the Troubleshooting Task Manager.  Specifically, look at the sections of the Task Manager does not start, and How to enable the Task Manager if it has been disabled.  Based on the other symptoms you have described, it is very possible that you have some kind of virus.  Please make sure that your antivirus software is up to date and run a scan complete your system.  Please let us know if you have any problems or questions.  Thank you.

  http://windowshelp.Microsoft.com/Windows/en-us/help/28500b59-2acf-4FCF-8743-393c91915de81033.mspx#ebb

  Shane
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• NB250/Device Manager does not recognize webcam

  Hello:

  I have NB250 with Windows 7. There is no indication of a webcam. Device Manager does not recognize it either. I know that there is a download application to search for it on my computer but I don't know where to look for it. Thank you.

  Post edited by: chizuka

  Check if the webcam is enabled in the BIOS.
  To access the press of BIOS F2 when starting the

• power management does not

  I thought z500 with windows preinstalled 8, after update to 8.1 windows power management does not.

  I can not increase or decrease the brightness of the screen, it is set at the lowest level...

  I uninstalled the power management tool and download the latest driver from lenovo site and install it as always the problem persists...

  I can only change the brightness when the system starts and lenovo shows...

  people of service center can also solve the problem...

  can someone help me on the same...

  Hello
  Download this driver for intel graphics hd
  http://support.Lenovo.com/en_US/downloads/detail.page?docid=DS031547
  Concerning

• Logical disk management does not recognize a slave drive

  I installed an internal HD as a slave. The BIOS sees the drive, Western Digital Lifeguard sees the drive (it checks OK) with the appropriate drive letter, PMagic sees the drive before starting, but the logical disk manager does not recognize the drive or the drive letter.

  Using Windows XP, SP3 with latest updates

  Hello

  1. The hard drive is recognized in another computer?

  If this isn't the case, then the problem could be the hard drive itself. If he is found, then the problem is in your computer. In this case, run the diskpart.exe utility.

  Use the list partition command and see if the partition is detected. If so, then I suggest you to format the drive in diskpart.

  However, take a return of all data on the hard drive before the format by plugging it into another computer. Help with backup data, see

  Backup: what, how, where

  http://www.Microsoft.com/protect/data/backup/about.aspx

  To use the Diskpart.exe utility, follow these steps:

  1. type diskpartand press ENTER to open the diskpart tool.

  2. type list diskand press ENTER. A list of available hard disks.

  3. type select disk =[n]

  n s Specifies the number of disc the disc to receive the focus.

  4. type list partition

  This command displays the partitions listed in the table to partition on the current drive.
  5. type select partition =[d]

  This command selects the specified partition and gives it the focus.

   d s Specifies the drive letter or mount point path of the partition to receive the focus.

  6. type format drive: / FS: NTFS/Quick

  For more information about commands, see

  A Description of the Diskpart command-line utility

  http://support.Microsoft.com/kb/300415

  Now you should be able to see the slave drive in Solution Explorer.

• The task in Windows XP MCE Manager does not load

  original title: TASK MANAGER XP MEDIA does not load

  with xp media center, the Task Manager does not, subst, remove it won't open, right click on the bar of tasks does not open it why?

  Hello

  You are able to open the registry and gpedit.msc without any problem (start-> Run Type & -> gpedit.msc-> ok).

  If yes then-> go to User Configuration model of administration-> system-> Ctel + Alt + Delete options-> double-click "Remove Task Manager" on the right side and select Disable-> Ok.

  Try to see if it works.

• The Task Manager does not work

  Dear,

  I have a Hp Envy 17-j009el with Windows 8.1. Recently my task manager does not work.

  I checked for viruses with avast free version, but no viruses were found.

  I also try the solutions suggested here withous success:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Task-Manager-problems

  Could be a conflict between avast and driver intel as suggested here?

  https://feedback.avast.com/responses/black-screen-after-log-in-Windows-8-Task-Manager-Don ' t-start

  Ive also installed Process Explorer, as the alternative Task Manager, but it's not working too.

  Thank you

  tizi27

  What exactly happens when you try to start the Task Manager? It appears an error message? Or it start & disappear immediately? You are able to open in safe mode Task Manager?

  If you wish, you can run our free tool for detection of virus: http://www.norton.com/npe

  Thank you!

  Harry

  Norton support

• When I turn on my computer a warning appears indicating "delivery manager does not properly.

  DEP original title: data

  When I turn on my computer, a warning appears that says "delivery manager does not properly" and when I click on help and support balloon explanation is that my DEP is not configured correctly.

  Then, after following the instructions and correct the parameters I restart my pc and still the same message appears.

  Hi Olliewoods,

  (1) since when are you facing this problem?

  (2) what is you receive the exact error message?

  An application installed on the computer may be the cause of this problem; I suggest you try the following steps:

  Method 1: Put the computer to boot to determine which application is causing the problem.

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.

  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not the computer to start normal follow step 7 in the link.

  See the link below for more information on Data Execution Prevention
  Data Execution Prevention: Frequently asked questions

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer
  ---------------------------------------------------------------------------------------------------------
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 7 Professional 64 bit - Credential Manager does not

  Credential Manager does not use stored credentials.  I tried the suggested actions elsewhere on the site, but there is no option to set dependencies on auto, and it made no difference.  Any suggestions?  Is this a bug that Microsoft has fixed?

  1 did you change on your computer before his show?

  2 have. what measures you tried?

  You can follow the steps below and see if it helps.

  (a) click Start.

  (b) in the search box type services.msc

  (c) right click Credential manager and go to Properties.

  (d) select Automatic from the startup type dropdown.

  (e) click on apply and OK.

  Check whether the problem is resolved.

  If the problem persists, you can check in a new user account.

  Create a user account

  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  See also:

  What is Credential Manager?

  http://Windows.Microsoft.com/en-us/Windows7/what-is-Credential-Manager

  Store passwords, certificates, and other credentials for automatic logon

  http://Windows.Microsoft.com/en-us/Windows7/store-passwords-certificates-and-other-credentials-for-automatic-logon

   

• The Task Manager does not work in Windows 7

  In Windows 7 Task Manager no longer works. I press Ctrl-Alt-Del and nothing seems to happen once I select "Task Manager"in the menu. I don't have the software for Windows disk because I bought from Best Buy HP desktop with Windows software loaded in.

  In Windows 7 Task Manager no longer works. I press Ctrl-Alt-Del and nothing seems to happen once I select "Task Manager"in the menu. I don't have the software for Windows disk because I bought from Best Buy HP desktop with Windows software loaded in.

  If the Task Manager does not start, your computer may be a virus. Make sure that you have installed on your computer updated antivirus software, scan your system with the AV software in safe mode.

• Audio plugin Manager does not open

  work on win 7 64 bit w audition cs6

  Audio plugin Manager does not open

  therealdobro wrote:

  Uninstall/reinstall?

  Not necessarily... try to start the hearing with the SHIFT key. It is possible that preferences have been corrupted.

• Adobe Application Manager does not display that Acrobat Pro XI is installed when it was

  Adobe Application Manager does not appear that Acrobat Pro XI is installed when it was installed by the Adobe Application Manager. I tried clicking on the button in the application manager Adobe who installs the program again and gives a key to launch the installation program. But the next time Adobe Application Manager starts, it said: Acrobat Pro XI is not installed, when it was installed (and working). I am a subscriber of creative cloud on the Mac (MacOS 10.8.3). platform Adobe Applicationa Manager is version 7.0.0.324.

  How can I get Adobe Application Manager to show that the program Acrobat Pro XI is installed?

  Thoughts?

  -john

  I tried the suggestion Greg_M #1 first - without success. Then tried the suggestion #2 of Arpit - also without success. However, I discovered that the uninstall program running in 'Applications-> Utilities-> Adobe Installers folder' had not removed the file Acrobat Pro XI (he was still in his file in the Applications). Finally, what worked manages the uninstall program that was in the folder ACROBAT PRO (NOT the utililites folder). When I ran the uninstaller program, I had also ticked the box in preferences to delete (not sure if that matters).

  All is well now. When I run Adobe Application Manager it says correctly that Acrobat XI is "installed".

  Greg and David thanks for your help/suggestions!

  -john

• Business Manager does not not with the error code of 1 after change of IP address

  Hello
  
  Due to new customer requirements, I had to move a group of servers to a new network and thus changed the IP address on each of them. One of our servers running Oracle 10.2 and is currently not properly start. Oracle Enterprise Manager does not load. When I try to start from the command prompt (start dbconsole enctl) it displays a message that begins, about 3 lines of periods then closes. I checked listner.ora and tnsnames.ora files and found that they had both the wrong IP in them. However, after the correction that it still does not start.
  
  I did not much of any administration before oracle, so I hesitate to start digging up files or run scripts without first asking someone. I hope that's not too hard to fix, and this group can provide assistance. I have not been able to find my answer on google this morning.
  
  The server running Oracle 10.2 on Windows server 2003. Thank you!

  Hello

  Follow this link (oracle will have to resolve to when IP address changed)

  http://download.Oracle.com/docs/CD/B19306_01/EM.102/b40002/structure.htm#sthref92

  In short, delete and recreate your repository EM

  emca -deconfig dbcontrol db -repos drop
  
  emca -config dbcontrol db -repos recreate
  

  Concerning

• App-Manager does not connect to the Simulator OS Firefox on Windows 7

  OS: Windows 7

  Firefox: 28

  6.0pre8.20140112 Simulator 1.2 Firefox OS

  When I run the simulator it opens fine and I see a Firefox OS Desktop
  But the App Manager does not connect. The console at the bottom right says:

  .. localhost:56455 options (the port varies)

  .. connection timeout. Possible causes: has not clicked 'accept' (guest).

  .. .disconnecting

  .. .disconnected

  I have disabled my firewall, restarted firefox and even system - did not help
  There is a similar bug - but I don't know if we are talking about the same thing:
  https://support.Mozilla.org/en-us/questions/988385

  Thank you

  Well - I already knew these links and I can't find anything useful
  Anyway, I tried the Simulator instead of 1.2 1.3 (unstable)
  This one works very well