NB250/Device Manager does not recognize webcam

Similar Questions

• W7 Device Manager does not recognize the Intel AMT devices

  Please help: where can I find - how to install the latest drivers Intel AMT for Windows 7.

  Hello

  Thank you for the question to Microsoft Community. I'll give my best to help you.

  From your problem description, I understand that the Device Manager does not recognize the Intel AMT devices

  What is the brand and model of the computer?

  Check out these links and see if they help.

  Computers that use Intel's vPro technology can have devices that are not recognized in Windows 7 Device Manager

  http://support.Microsoft.com/kb/976728

  Clean installation WARNING: Back up your files before you begin reinstalling Windows, even if you're reinstalling Windows on a hard disk partition. A clean installation replaces the current version of Windows and all personal files.

  If your motherboard supports AMT technology, you can download, install the drivers from this link.

  AMT: Intel® AMT Driver for Intel® motherboards

  http://Downloadcenter.Intel.com/Detail_Desc.aspx?&DwnldID=16936

  Note: This download is valid for the products listed below.

  Intel® card mother DB43LD

  Intel® card mother DQ43AP

  Intel® card mother DQ45CB

  Intel® card mother DQ45EK

  If the problem persists, I suggest you to contact Intel support. http://communities.Intel.com/Community/Tech

• Windows XP: Device Manager does not recognize modem?

  I wanted to configure Microsoft Fax. Everything was fine, but the Device Manager did not recognize modem, so I can't send and receive faxes.

  Thank you in advance!

  Hello

  Please follow the steps mentioned below and get back to us with the results.

  Method 1: The modem settings are missing after you remove and re-insert your Modem
  http://support.Microsoft.com/kb/321036

  Method 2: Install, configure, and send faxes in Windows XP

  http://TechNet.Microsoft.com/en-us/library/dd346629.aspx

  For more information, see the links below.

  To remove a modem

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/MODE_REMOVE.mspx?mfr=true

  To install a modem

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/mode_installmodem.mspx?mfr=true

  I hope that helps!

• Device Manager does not recognize 8600 scanner and therefore not recognized in other applications

  I recently replaced my HP6100 with a HP8600.  A set of software picture Organizer does not recognize the scanner unit and so I can't scan photo to this software.  Printer features work very well, but I can't get the Device Manager to see the device as a device image.  I use Windows 8.1 on a laptop Lenovo Twist/tablet.  Please help me understand what I need to do to get Device Manager to recognize the scanner.

  Thank you!

  Hello

  Sounds like something is missing when installing. Please, download the following tool and run it on your computer:

  http://ftp.HP.com/pub/softlib/software12/COL50849/MP-129932-1/HPPSdr.exe

  Kind regards.

• Device Manager does not recognize the internal WLAN card

  I have a laptop HP/Compaq Presario V6200CTO which has an internal wifi card. The wifi worked perfectly until about a week ago, when Windows 7 has ceased to recognize the card altogether. I thouhgt first it was a hardware problem and that the card had died and so I bought a USB adapter, but before the arrival of the adapter that I needed to start in SafeMode w/network (I used adapter Linksys a friend). When OS safe mode entered it automatically loaded the driver "Broadcom", installed the wifi device internal and it worked fine while I was in safe mode. After the system restarts the operating system has yet to recognize the internal card. I rebooted in SafeMode once again, but still the card was not recognized. It seems unlikely that a dead card came suddenly to life for the short period of time I was in safe mode, and then quickly died again on restart. Therefore, I think it is an OS problem, but as the map is not displayed in Device Manager I have no idea how to proceed. N USB adapter I bought works fine, but I'd rather be able to use the internal card and free USB port. Is there a way to load the device from the command line or in a way to force the operating system to find the map?

  Lack of maps can often work for short periods. Then, some components overheating or falls down and they stop working.

• BlackBerry 8830 smartphones & Desktop Manager does not recognize Outlook Express 2000, cannot sync

  I just installed Desktop Manager 5.0 and connected to my BB 8830.  I use Outlook Express 2000 for the calendar and I want to sync it with my BB 8330.  However, in Desktop Manager under Sync / Config / select the device for the calendar, the only choices are Yahoo and text import/export.  Of course, it does not recognize Outlook Express 2000 as a calendar program.  Does anyone have a solution?

  I bought this 8830 mainly to sync its calendar with my Outlook Express calendar.  If this does not work, then I'll go back to my cell phone operator.

  I installed Desktop Manager 4.1 and it works now.  Be aware with this version, once you connect your BB to your computer, unless you go through the Wizard Windows Found New Hardware, Desktop Manager does not recognize the connection with your BB and your computer (I don't have to do with version 5.0).

  RIM should be more attentive to people with a recent phone, but still using an earlier version of Microsoft Outlook / office.

• Logical disk management does not recognize a slave drive

  I installed an internal HD as a slave. The BIOS sees the drive, Western Digital Lifeguard sees the drive (it checks OK) with the appropriate drive letter, PMagic sees the drive before starting, but the logical disk manager does not recognize the drive or the drive letter.

  Using Windows XP, SP3 with latest updates

  Hello

  1. The hard drive is recognized in another computer?

  If this isn't the case, then the problem could be the hard drive itself. If he is found, then the problem is in your computer. In this case, run the diskpart.exe utility.

  Use the list partition command and see if the partition is detected. If so, then I suggest you to format the drive in diskpart.

  However, take a return of all data on the hard drive before the format by plugging it into another computer. Help with backup data, see

  Backup: what, how, where

  http://www.Microsoft.com/protect/data/backup/about.aspx

  To use the Diskpart.exe utility, follow these steps:

  1. type diskpartand press ENTER to open the diskpart tool.

  2. type list diskand press ENTER. A list of available hard disks.

  3. type select disk =[n]

  n s Specifies the number of disc the disc to receive the focus.

  4. type list partition

  This command displays the partitions listed in the table to partition on the current drive.
  5. type select partition =[d]

  This command selects the specified partition and gives it the focus.

   d s Specifies the drive letter or mount point path of the partition to receive the focus.

  6. type format drive: / FS: NTFS/Quick

  For more information about commands, see

  A Description of the Diskpart command-line utility

  http://support.Microsoft.com/kb/300415

  Now you should be able to see the slave drive in Solution Explorer.

• Device Manager does not display devices

  Control Panel takes me to the MMC, but Device Manager does not display devices

  Hi Bandjo,

  ·         Device Manager is empty?

  ·         You have made any changes recently?

  ·         You have installed Windows XP Service Pack 3?

  Check to see if this article helps you.

  None of the items appear in the device list manager when you open

• My floppy drive is not reading the disks. Device Manager does not detect any problems, I uninstalled and reinstalled the drivers. What should I do now?

  My floppy drive is not reading the disks. Device Manager does not detect any problems, I uninstalled and reinstalled the drivers.
  Convenience store said to click on properties Insert the diskette and
  Double click on open, but when I do that it stop computer
  and opens the recovery and ask for a correct diskette,

  Hello Tallm,

  Thank you for your message.  Did you get your floppy drivers of your installation diskettes?  If so, go to the website of the manufacturer of your computer and download/install the latest drivers.  Please let us know if this or help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Device Manager does not display c or D drive.

  The Windows Device Manager does not display the drives c or d.  With File Explorer, they show and are easily accessible.  What's wrong?

  Hi Alberini,

  You would actually use the Device Manager to determine which devices are installed on your computer, update driver software for your devices, check to see if hardware is working properly and change the hardware settings. You can also use Device Manager to update a driver that does not work properly or restore a driver with its previous version.

  To view the files or the drive hard internal to your computer, would use you Windows Explorer.

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Manager does not recognize my cc of photoshop

  Manager does not recognize my photoshop cc, think I have photoshop 11 or less?

  Adobe Exchange

• Smartphones from blackBerry Desktop Manager does not recognize that the "BOLD" is connected

  I loaded the Software Desktop including Desktop Manager v4.7.  When I connect my "BOLD" via the USB port of my PC, the PC recognizes the new hardware and identifies it as a Blackberry Smartphone.  But when I launch Desktop Manager, it does not recognize the "BOLD", and at the bottom left of the window shows "Connected Device (PIN): No."

  Can someone help, please?

  Thank you, but the problem was solved when I used a different USB port on my PC.

• Recovery Manager does not recognize a flash drive

  Well, this is my second attempt to create recovery media, initially I thought the drive was defective and returned. I would go to 8.1 but would create recovery first. Recovery creator does not recognize the cross (SanDick Cruzer 16 GB) flash drive the forums and google around and have not really found a solution. Help please? Must I resort to buying discs for this purpose? I don't see any mention of this player being Win 8 compatible.  PC is the new HP Envy 1430. THX...

  natrldsastr wrote:

  I said in my initial inquiry, I can't find any compatible 'Win 8' claim for this device. The packaging claims to be compatible by the bias of Win 7, but no mention of 8. I knew it was a problem and had checked. Regardless, this disc is useless for the recovery of the system. Thanks for your time.

  Hello! Looks like you have a couple of choices for me. Use a PNY flash. Create an image of your operating system with a third-party App or get some DVD high quality. I agree that the drive is useless for the recovery of the system. I've seen your problem before on other forums and other products. I do not have the answer.

  Dokie!

  PS Perhaps SanDisk has a?

• BlackBerry Smartphones Media Manager does not recognize the Media card

  Installed the media 2G card.  Card is able to format and presents itself as 1.8 GB.  With mass storage, office software (Roxio media manager) does not show - memory card from the device.  In mass storage mode (which, according to the manual means the acts of the device as a USB storage device), PC sees the device, but does not not the files copied to it.  Has spent about 2 hours with the technical support of Verizon... they are puzzled.

  I found a workaround for the music files on the card.  I removed from the Blackberry and installed in an SD adapter full-size and there in a USB key with a SD slot.  My computer has seen the media card (embedded in the USB device) and I flew over songs in the repertoire of music on the media card, put it back into my phone and viola... the music file was there!

• Smartphones from blackBerry Desktop Manager does not recognize my Sprint Bold 9650

  I put these questions I have on You Tube.

  http://www.YouTube.com/watch?v=lcSwbk7sxFE

  or you can search youtube for.

  Sprint Blackberry Bold 9650 Desktop Manager questions

  The software does not recognize my phone at all - ever - new install on 13/07/2001

  It's my first installation of the Software Desktop manager (no previous version where installed)

  I changed the power setting on my laptop USB ports

  Phone is version 6.0 bundle 2647

  Version of Desktop Manager is 6.1.0.35

  Thanks for your help-

  KB00125 - had the answer - I didn't know this - the data cable was thicker - the two cables where from Blackberry
  The answer
  Some USB cables are provided for only working load. These cables have no pins for data transfer.

  Implement a USB cable with pins for the transfer of data.