start without password for win7

Similar Questions

• unlock the drive without password for bitlocker in windows 7

  unlock the drive without password for bitlocker in windows 7

  FORGET password & key recovery

  Help, please

  Hello

  In your Microsoft account. To get your recovery key, go to BitLocker recovery keys.

  • Or ask for help:
  • Ask someone with administrative privileges on the same PC to unlock with their key.
  • If your PC is connected to a domain (usually a computer from work or school), ask a system administrator for your recovery key.
  • If you still can't, you will have to reset your PC. Learn how.
  • Related topic:

  «Have forgotten the password and not be in immediate possession of the recovery key, your only chance to unlock the drive is if you supported the key until your space storage Microsoft Account or cloud (e.g.: Dropbox, OneDrive).» The key to your Microsoft Account backup can be done during installation for Windows 8 and later, but is not supported by Windows 7 built-in mechanisms. As you use the latter, you would have had first to save the key to an offline storage device (for example: USB key) and transfer it to OneDrive or another cloud storage provider. »

  http://superuser.com/questions/790379/BitLocker-lost-BitLocker-password-and-recovery-key

• INS-06003: failure of connectivity SSH without password for installation with the following

  Dear all,
  
  I am in the process of installing Oracle 11 g on Redhat Linux 2 grid Infrastructure.
  I have installed ssh on both RAC nodes and when I run
  
  SSH - p7547 racnode1 "date; hostname ".
  SSH - p7547 racnode2 "date; hostname ".
  
  I get the date and the hostname without error on both nodes.
  
  But during the installation of the grid, I get this error message:
  
  INS-06003: failure of connectivity SSH without password for installation with the following nodes: [racnode1, racnode2]
  
  My thought is that it is because of the port has changed 22: 7547 but where them specify this port in the configuration of the CARS?
  
  I also get this information in the Setup log:
  
  WARNING: Could not establish a SSH connectivity with node racnode1. Reason: java.net.ConnectException: connection refused
  
  Kindly help on that.
  
  Kind regards
  Imran

  misterimran wrote:
  Dear all,

  I am in the process of installing Oracle 11 g on Redhat Linux 2 grid Infrastructure.
  I have installed ssh on both RAC nodes and when I run

  SSH - p7547 racnode1 "date; hostname ".
  SSH - p7547 racnode2 "date; hostname ".

  I get the date and the hostname without error on both nodes.

  But during the installation of the grid, I get this error message:

  INS-06003: failure of connectivity SSH without password for installation with the following nodes: [racnode1, racnode2]

  My thought is that it is because of the port has changed 22: 7547 but where them specify this port in the configuration of the CARS?

  I also get this information in the Setup log:

  WARNING: Could not establish a SSH connectivity with node racnode1. Reason: java.net.ConnectException: connection refused

  Kindly help on that.

  Kind regards
  Imran

  You can have the file/etc/ssh/ssh_config, where the default port is set at 22. Replace with 7547 and try ssh racnode1 "date; hostname". If it works, then it contains the definition, you may need to perform.

  Kind regards
  Julien

• Windows mail and runs under Vista, recently started asking passwords for e-mail accounts, I had defined for the years

  I have several e-mail accounts defined in Windows Mail (WM). In 2008, I created these accounts and WM has never had any problems email from their recovery. A few days earlier, a "Windows Security" pop-up appeared asking me to "Please verify that the user name and the password are correct for your mail server." I enter the user name and password and let the box 'Remember my references' checked. WM then recovers successfully by e-mail of this provider. I repeat this process to enter email ID and their password for each e-mail and WM account gets successfully mail from them all. Subsequent recoveries automatic email (that occur every 20 minutes as specified via 'Tools', 'Options' and ' check for new messages every xx minute (s) ' in the 'Général' tab) run without problem until I restart WM. So I must return all identifiers and passwords.
  I deleted the entry for one of the accounts, WM restarted and then recreated the account. Once more, it works fine until I restart WM, date on which the impulse begins again. It seems that WM has lost the ability to remember the ID and password between sessions.
  Comments for similar problems indicate that McAfee antivirus can be the cause of the problem. I use BitDefender Antivirus. I don't see how my AV product could be the problem because once I re - enter usernames and passwords, everything works fine.

  Thank you Gary, but I don't know why BitDefender or any other product of anti-virus (AV) would be a problem. As I said, once I entered the login details and passwords, I am able to send and receive mail several times without the prompt that appears until I restart Windows Mail (WM). I speculate here but I feel that the AV product would have not had invoked until there was the mail for her to analyze. This would not happen until AFTER WM was authenticated by the mail server, and then began to receive mail. The authentication command prompt was certainly appear BEFORE WM tried to contact different mail servers. I know this because I could see send/receive the WM status window, where it shows each email account and compares it to the coast after a successful login.

  In any case, when I started this morning at WM, it worked well! The only thing I can think of that would have fixed this problem as if by magic is that I applied the following Vista hotfixes yesterday:

  • Windows malicious software removal tool - January 2011 (KB890830)
  • Update security for Windows Vista (KB2419640)
  • Update security for Windows Vista (KB2478935)
  • Update definition for Windows Defender - KB915597 (definition 1.95.3662.0)
  Then I did the required reboot. I'm skeptical that these corrections have a direct effect on this problem because when I started at WM after the restart, he asked once more the ID and passwords. I did nothing with the AV product
  The key here is that WM works very well this morning in the same environment as yesterday, except for the above mentioned fixes. I consider this problem in the past, but I do NOT know what caused his in the first place or what fixed it.
  Thank you all for your help!

• With or without password for remote desktop connection

  Hi all ^_^

  I've got a trick (win 7) & PC (win el maestro)
  I am the only 1 using the tower and the PC for all, after that I created a password for the PC, I tried to log in it in the round using desktop connection remote and it worked, but now I connect the lab PC's get connected f and when I write the password in the computer to connect to the connection in the laboratory is an error or something like that!
  but now I removed the password until I have find a way to connect without having this problem
  can you help me with this?
  I read things on empty passwords and security policy and other things, it's about connecting a computer without password
  can you help me with this?
  I need the boring explanation if you can
  Thank you

  Hello

  You can do this, but I do NOT recommend it because in this case if someone has your IP address then could access your windows by using remote desktop. And people could use find find IP of random generator and when there is NO password can access. so please use password and the password to connect.

  However, you can configure the setting to connect with empty password:

  1) go to control panel

  2 Administrative Tools)

  look 3) to the local security policy

  (4) open and look for security options

  (5) then in account you will see something like "limit local account use of the empty password for console logon only

  (6) try to disable it and reboot your PC

  It should work, but as I said, it could put your PC in DANGER.

  By design remote desktop requires a password to connect safety precaution. The Remote Desktop user ID and password are the on the computer you want to access and control remote. The user ID must be an administrator or be a member of the remote desktop users group.

  https://SkyDrive.live.com/redir.aspx?CID=25ab668da65c8fbe&RESID=25AB668DA65C8FBE! 287 & Thierry = 25AB668DA65C8FBE! 118

  If you need create a password for the user ID you want to connect with the help of office remotely.

  Computer on which is the host of remote desktop, IE. the computer you want to access remote/control? It is not clear from your description, although I assume it is the office.

• How can brake password for win7

  How can I stop a win7 from my pc password help please please please

  Hello

  Responses cannot help with password lost or forgotten by Microsoft Policy.

  Keep secure passwords - Microsoft strategy on move the passwords
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

  What to do if you forget your Windows password (Vista and Windows 7)
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-you-forget-your-Windows-password

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• WindowsMediaPlayer does not start without download for 8-10 minutes

  I tried microsoft fixit, but it did not work

  Download the Windows Installer Cleanup on (msicu.exe): http://download.cnet.com/Microsoft-Windows-Installer-Cleanup-Utility/3000-18512_4-205179.html

  Use with care as you like just to uninstall Media Player and then reinstall it.

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• Authentication of SSH without password on a PIX

  I'm looking to implement authentication SSH without password for a Solaris client can run a script to open a session on a PIX and retrieve the configuration.

  Someone has reached the SSH authentication without password on a PIX or find out if the device supports it or not?

  Thank you, Dom

  It is vaguely correct.

  Here are the details:

  Security506E - 6.x (config) # aaa HS

  AAA proxy-limit 16

  authentication AAA ssh console LOCAL SecurityACS1111

  Console HTTP authentication of the AAA SecurityACS1111 LOCAL

  Console Telnet AAA authentication LOCAL SecurityACS1111

  Console to enable AAA authentication LOCAL SecurityACS1111

  LOCAL AAA authorization command

  now, if you have configured aaa on the pix and specified an aaa for the role of authentication server when ssh is done "'authentication aaa ssh console LOCAL SecurityACS1111'...". then the username and passwords of the Ali database should be provided when ssh is done.

  If you have specified LOCAL as an authentication method, then the database username and password configured in the configuration of the firewall will be used for the purposes of authentication.

  If you have not specified "ssh" under "sh aaa" command output, then the default settings are used.

  dafault settings:

  username: pix

  telnet password: password you have defined with the command:

  password

  activate the password:

  password, you have defined using:

  activate the password

  Please indicate if this help!

  Sushil

  Cisco tac.

• PC can see and access the laptop without asking for a user name and password but the laptop cannot access the PC because it asks me a username and password that I don't know.

  Vista - Windows 7 network connection. username and password is unknown.

  Hello

  I just got a laptop with windows 7 on it and I want to connect to my other PC for it, they are on the same network through a router. the PC can see and access the laptop without asking for a user name and password but the laptop cannot access the PC because it asks me a username and password that I don't know.

  If someone could answer this question, it would be great.

  Hello
  Maybe this can help.

  Win7 when configured on the peer-to-peer network has three types of configurations of sharing.

  Group residential network = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.

  Working network = fundamentally similar to previous methods of sharing that allow you to control what, how and to whom the records would be shared with.
  
  Public share = network Public (as Internet Café) in order to reduce security risks.

  For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.

  http://www.ezlan.NET/Win7/net_name.jpg

  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq.html#trusted
  Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  ------------------------------

  If your network consists only of Win 7 and you want a simple network, use it.

  http://Windows.Microsoft.com/en-us/Windows7/help/videos/sharing-files-with-HomeGroup

  After you have configured the homegroup, scroll to the bottom for the Permission/security section.

  -----------------------------

  Win 7 networking with other version of Windows as a work network.

  In the center of the network, by clicking on the type of network opens the window to the right.

  Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.

  http://www.ezlan.NET/Win7/net_type.jpg

  Win 7 - http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows

  Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm

  Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

  Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040
  Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

  Setting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
  Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  -------------

  If you have authorization and security problems, check the following settings.

  Point to a folder that wants to share do right click and choose Properties.

  In the properties

  Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

  This screen shot is to Win 7, Vista menus are similar.

  http://www.ezlan.NET/Win7/permission-security.jpg

  The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

  When everything is OK, restart the network (router and computer).

  * Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.

  * Note . There must be specific users. All means all users who already have an account now as users. This does not mean everyone who feel they would like to connect.

  ---------------------

  *** Note. Some of the processes described above are made sake not for Windows, but to compensate for different routers and how their firmware works and stores information about computers that are networked.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• MN - 700 router worked for a while (over 3 years) without password. How to set a password? __

  MN - 700 router worked for a while (over 3 years) without password. How to set a password?

  MN - 700 router worked for a while (over 3 years) without password. How to set a password?

  This is a pretty old router, but documentation is still available from Microsoft:http://support.microsoft.com/kb/902461 the 'Guide' is more complete, but the "Base Station Configuration Guide" will explain how to configure the router.

  I guess what you mean by a "password" is the password for the wireless encryption (there is also a password that controls access to the router configuration utility). The following are the basic steps to configure wireless encryption (see the documentation for more details and screenshots):

  1. utility access to the router configuration, preferably with a computer connected to the router with an Ethernet cable (if you change your wireless security, the parameters using a computer connected to the router by wireless, the connection will be abandoned as soon as you click APPLY).  Open a web browser and type 192.168.2.1 in the browser address box.  If you have not changed the logon password, enter 'admin' (without the quotes, all lowercase).

  2. click on the "Security" link on the home page of the configuration tool, then "Wireless Security".

  3. Select the "niveau_chiffrement" in the combo box to "256-bit WPA - PSK (louder)" - unless all of your wireless devices are so old they don't support WEP (unusual for a wifi device years less than 5 or 6).

  4. in the box, type a password (between 8 and 63 characters), and then click 'apply '. at this point, you will be disconnected from the router (and the Internet) If you did the above changes using a computer connected to the router WiFi.   Write the password in a place where you don't forget.

  5. close router configuration utility.

  To set up your wireless computers:

  6. open network connections (start > run > ncpa.cpl > OK)

  7. right click on your wireless adapter icon and select Properties.

  8. click on the wireless networks tab

  9. make sure the box at the top next to "use Windows to configure my wireless."

  10. in the list of "Preferred networks", select the entry to your router (your network name), click on 'delete '.  [This deletes the entry from your wireless network WITHOUT a password, so that you will be able to add an entry for a network with the same name WITH a password.]

  11. click on the view wireless networks"" button.

  12. the name of your network should appear in the list of wireless networks.  Select it and click "connect". When you are prompted for the password, enter the WPA password set in the router configuration.

  13. open a web browser and confirm that you can access the Internet.

• Cannot access the password for administrator on Win7, how can we access this account?

  There are two accounts on this computer. An administrative and standard user.

  I can't access the administrative account. I forgot the password for this account.
  I can access the standard user account, but I can't change the administrative password because his account not administrative and I do not know the password on the admin account.
  How can I either change the standard user to admin user without having need of the admin password or how can I access the administrator account?
  The admin account is my main account with everything I need.
  His family win7 premium is a desktop computer.
  I, also, don't have Internet. The only internet I have is on my mobile phone with limited data.
  This is why I can't download anything to help.
  Help or knowledge is much appreciated.
  Thank you

  I can't access the administrative account. I forgot the password for this account.

  There are a lot of options built into Windows to help you out of this situation:
  • Restart the computer with your Windows repair CD, then use system restore to set Windows in a few days (only works if you have recently changed the password).
  • Log on to your account admin to spare, and then reset the password for your existing account (works only if you set up an alternative admin account).
  • Log in as administrator mode without failure, then reset the password for your existing account (the password is usually empty).
  • Insert your flash drive USB with the password key file (only works if you have taken the time to create such a key file).
  • Use the password indicator (works only if you have created a hint and if it's good enough to allow you to guess the password)
  • Check your paper files (works only if you threw down the password somewhere)

• VPN connects without asking for a password!

  Hello

  I just moved my setup lab work VPN to my main router, everything works planned, except that when I try to connect with VPN, it connect directly WITHOUT asking for a Login or password, I don't get the context menu!

  Two routers an equal (C1841) HW and SW (system image file is "flash: c1841-advsecurityk9 - mz.124 - 24.T1.bin")

  Here below the full working script:

  (I know I have to clean, I'll do it next week)

  Best regards

  Didier

  ROUTER1841 #sh run

  Building configuration...

  Current configuration: 8440 bytes

  !

  ! Last configuration change at 10:27:45 gmt + 1 Sunday 30 January, 2011 by admin

  ! NVRAM config update at 00:29:33 gmt + 1 Sunday 30 January, 2011 by admin

  !

  version 12.4

  horodateurs service debug datetime localtime

  Log service timestamps datetime msec

  encryption password service

  !

  hostname ROUTER1841

  !

  boot-start-marker

  boot-end-marker

  !

  forest-meter operation of syslog messages

  logging buffered 4096 notifications

  enable password 7 05080F1C2243

  !

  AAA new-model

  !

  AAA authentication login userauthen local

  AAA authorization groupauthor LAN

  !

  AAA - the id of the joint session

  clock time zone gmt + 1 1 schedule

  clock daylight saving time gmt + 2 recurring last Sun Mar 02:00 last Sun Oct 03:00

  dot11 syslog

  no ip source route

  !

  No dhcp use connected vrf ip

  DHCP excluded-address IP 192.168.10.1

  DHCP excluded-address IP 192.168.20.1

  DHCP excluded-address IP 192.168.30.1

  DHCP excluded-address IP 192.168.100.1

  IP dhcp excluded-address 192.168.1.250 192.168.1.254

  !

  IP dhcp pool vlan10

  import all

  network 192.168.10.0 255.255.255.0

  default router 192.168.10.1

  lease 5

  !

  IP dhcp pool vlan20

  import all

  network 192.168.20.0 255.255.255.0

  router by default - 192.168.20.1

  lease 5

  !

  IP dhcp pool vlan30

  import all

  network 192.168.30.0 255.255.255.0

  default router 192.168.30.1

  !

  IP TEST dhcp pool

  the host 192.168.100.20 255.255.255.0

  0100.2241.353f.5e client identifier

  !

  internal IP dhcp pool

  network 192.168.100.0 255.255.255.0

  Server DNS 192.168.100.1

  default router 192.168.100.1

  !

  IP dhcp pool vlan1

  network 192.168.1.0 255.255.255.0

  Server DNS 8.8.8.8

  default router 192.168.1.1

  lease 5

  !

  dhcp MAC IP pool

  the host 192.168.10.50 255.255.255.0

  0100.2312.1c0a.39 client identifier

  !

  IP PRINTER dhcp pool

  the host 192.168.10.20 255.255.255.0

  0100.242b.4d0c.5a client identifier

  !

  MLGW dhcp IP pool

  the host 192.168.10.10 255.255.255.0

  address material 0004.f301.58b3

  !

  pool of dhcp IP pc-vero

  the host 192.168.10.68 255.255.255.0

  0100.1d92.5982.24 client identifier

  !

  IP dhcp pool vlan245

  import all

  network 192.168.245.0 255.255.255.0

  router by default - 192.168.245.1

  !

  dhcp VPN_ROUTER IP pool

  0100.0f23.604d.a0 client identifier

  !

  dhcp QNAP_NAS IP pool

  the host 192.168.10.100 255.255.255.0

  0100.089b.ad17.8f client identifier

  name of the client QNAP_NAS

  !

  IP cef

  no ip bootp Server

  IP domain name dri

  host IP SW12 192.168.1.252

  host IP SW24 192.168.1.251

  IP host tftp 192.168.10.50

  host IP of Router_A 192.168.10.5

  host IP of Router_B 10.0.1.1

  IP ddns update DynDNS method

  HTTP

  Add http://dri66: [email protected] / * *//nic/update?system=dyndns&hostname=mlgw.dyndns.info&myip=[email protected] / * //nic/update?system=dyndns&hostname=mlgw.dyndns.info&myip=

  maximum interval 1 0 0 0

  minimum interval 1 0 0 0

  !

  NTP 66.27.60.10 Server

  !

  Authenticated MultiLink bundle-name Panel

  !

  !

  Flow-Sampler-map mysampler1

  Random mode one - out of 100

  !

  Crypto pki trustpoint TP-self-signed-2996752687

  enrollment selfsigned

  name of the object cn = IOS - Self - signed - certificate - 2996752687

  revocation checking no

  rsakeypair TP-self-signed-2996752687

  !

  !

  TP-self-signed-2996752687 crypto pki certificate chain

  certificate self-signed 01

  30820246 308201AF A0030201 02020101 300 D 0609 2A 864886 F70D0101 04050030

  2 060355 04031326 494F532D 53656 C 66 2 AND 536967 6E65642D 43657274 31312F30

  69666963 32393936 37353236 6174652D 3837301E 170 3130 31313330 31393036

  34355A 17 0D 323030 31303130 30303030 305A 3031 06035504 03132649 312F302D

  4F532D53 5369676E 656C662D 43 65727469 66696361 74652 32 39393637 65642D

  35323638 3730819F 300 D 0609 2A 864886 01050003, 818, 0030, 81890281 F70D0101

  8100E1D0 6D1EDC8A D7C6D4C4 FADC711E FB52B082 4F81BF1E 9B5BD3A0 DDB505E2

  6E69B426 47168821 AA60E9ED C4B3F95B C0830935 F6B395BA EB6CFC82 E27B75EC

  9 258765 4690634 628EBF91 CBF13884 F5DA31EF 44C3D330 C9FF0D27 E45DE343

  5F5EE55B A4B53946 56429179 15687FFE 63A7C25C 259FA18E DB20F8C5 5F3065E1

  02570203 010001 HAS 3 1 130101 FF040530 030101FF 30190603 0F060355 6E306C30

  551 1104 12301082 0E524F55 54455231 3834312E 64726930 1 230418 1F060355

  30168014 6144EDD8 070B697B 38FC3D5E A2501396 D885B4D5 551D0E04 0603 301D

  16041461 44EDD807 0B697B38 FC3D5EA2 501396 85B4D530 D 8 0D06092A 864886F7

  010104 05000381 810099FA B5F4D0B0 D51DA525 1AB96481 1D1732B3 CD080412 0D

  2255E8DB 84823CF5 ED9C077C 1FADFF17 A9A1D4BA B69B39B0 47A9CBA7 4A97C1E5

  6A1B6FBD 511BA8AD 3E716EC3 654980DA F16A3B47 CE7BC6A4 1902600E CB1373E2

  863C 6352 9074B62A 15E74894 BEDEDC14 D85753AF AD2EF852 6A4B2588 9759CABD

  42AD878C 58504629 BE48

  quit smoking

  !

  !

  VTP version 2

  username Admin privilege 15 secret 5 $1$ gAFQ$ 2ecAHSYEU9g7b6WYuTY9G.

  username cisco password 7 02050D 480809

  Archives

  The config log

  hidekeys

  !

  !

  crypto ISAKMP policy 3

  BA 3des

  preshared authentication

  Group 2

  !

  ISAKMP crypto client configuration group 3000client

  key cisco123

  DNS 8.8.8.8

  domain cisco.com

  pool VPNpool

  ACL 150

  !

  !

  Crypto ipsec transform-set esp-3des esp-sha-hmac RIGHT

  !

  Crypto-map dynamic dynmap 10

  Set transform-set RIGHT

  !

  !

  card crypto client clienmap of authentication list userauthen

  !

  card crypto clientmap isakmp authorization list groupauthor

  client configuration address map clientmap crypto answer

  10 ipsec-isakmp crypto map clientmap Dynamics dynmap

  !

  !

  !

  property intellectual ssh time 60

  property intellectual ssh authentication-2 retries

  IP port ssh 8096 Rotary 1

  property intellectual ssh version 2

  !

  !

  !

  interface Loopback0

  IP 192.66.66.66 255.255.255.0

  !

  interface FastEthernet0/0

  DMZ description

  IP ddns update hostname mlgw.dyndns.info

  IP ddns update DynDNS

  DHCP IP address

  no ip unreachable

  no ip proxy-arp

  NAT outside IP

  IP virtual-reassembly

  automatic duplex

  automatic speed

  clientmap card crypto

  !

  interface FastEthernet0/0,241

  Description VLAN 241

  encapsulation dot1Q 241

  DHCP IP address

  IP access-group dri-acl-in in

  NAT outside IP

  IP virtual-reassembly

  No cdp enable

  !

  interface FastEthernet0/0.245

  encapsulation dot1Q 245

  DHCP IP address

  IP access-group dri-acl-in in

  NAT outside IP

  IP virtual-reassembly

  No cdp enable

  !

  interface FastEthernet0/1

  Description INTERNAL ETH - LAN$

  IP 192.168.100.1 address 255.255.255.0

  no ip proxy-arp

  IP nat inside

  IP virtual-reassembly

  Shutdown

  automatic duplex

  automatic speed

  !

  interface FastEthernet0/0/0

  switchport access vlan 10

  spanning tree portfast

  !

  interface FastEthernet0/0/1

  switchport access vlan 245

  spanning tree portfast

  !

  interface FastEthernet0/0/2

  switchport access vlan 30

  spanning tree portfast

  !

  interface FastEthernet0/0/3

  switchport mode trunk

  !

  interface Vlan1

  IP address 192.168.1.250 255.255.255.0

  IP nat inside

  IP virtual-reassembly

  !

  interface Vlan10

  IP 192.168.10.1 255.255.255.0

  IP nat inside

  IP virtual-reassembly

  !

  interface Vlan20

  address 192.168.20.1 255.255.255.0

  IP nat inside

  IP virtual-reassembly

  !

  Vlan30 interface

  192.168.30.1 IP address 255.255.255.0

  IP nat inside

  IP virtual-reassembly

  !

  interface Vlan245

  IP 192.168.245.1 255.255.255.0

  IP nat inside

  IP virtual-reassembly

  !

  IP pool local 172.16.0.1 VPNpool 172.16.0.200

  IP forward-Protocol ND

  no ip address of the http server

  local IP http authentication

  IP http secure server

  !

  IP flow-cache timeout idle 130

  IP flow-cache timeout active 20

  cache IP flow-aggregation prefix

  cache timeout idle 400

  active cache expiration time 25

  !

  !

  IP nat inside source static tcp 192.168.10.68 5800 interface FastEthernet0/0 5800

  overload of IP nat inside source list 170 interface FastEthernet0/0

  IP nat inside source static tcp 192.168.10.68 5900 interface FastEthernet0/0 5900

  overload of IP nat inside source list interface FastEthernet0/0.245 NAT1

  IP nat inside source static tcp 192.168.10.10 80 interface FastEthernet0/0 8095

  !

  access-list 150 permit ip 192.168.10.0 0.0.0.255 172.16.0.0 0.0.0.255

  access-list 170 refuse ip 192.168.10.0 0.0.0.255 172.16.0.0 0.0.0.255

  access-list 170 permit ip 192.168.10.0 0.0.0.255 any

  access-list 180 deny ip 192.168.10.0 0.0.0.255 172.16.0.0 0.0.0.255

  access-list 180 permit ip 192.168.10.0 0.0.0.255 any

  not run cdp

  !

  !

  !

  route NAT allowed 10 map

  corresponds to the IP 180

  !

  !

  !

  control plan

  !

  Line con 0

  Speed 115200

  line to 0

  line vty 0 4

  access-class 5

  privilege level 15

  Rotary 1

  transport input telnet ssh

  line vty 5 15

  access-class 5

  Rotary 1

  !

  Scheduler allocate 20000 1000

  end

  Didier,

  You can configure the router to accept the connection of customer VPN without XAUTH (extended authentication), so by this authenticating just VPN client itself, not the user.

  But, depending on the configuration, you will be prompted for user/pass.

  Are you saying the client connects very well and the tunnel is fully established without this prompt?

  Federico.

• After deleting saved password and the connection to outlook he autologing got me in without asking for password, how do I stop this?

  I've removed the password registered and logged, after going to outlook.com it comes automatically me relogs without asking for a user name or password.

  Hello qqquestion, websites usually set cookies to store information that your browser is currently connected, so you have to make them disappear too: delete cookies to remove the information from Web sites is stored on your computer

• Is that a way firefox will store the information of user name for a site without password information?

  some other browsers allow a user name to be automatically filled in and saved so you just enter a password. It seems that Firefox does not have this option. Is that a way firefox will store the information of user name for a site without password information?

  This works! Thank you very much.

• I forgot my password for my iphone and sound off now is there a way to access my phone without losing everything on it

  I forgot my password for my iphone and sound off now is there a way to access my phone without losing everything on it

  No, it does not exist:

  If you have forgotten the password for your iPhone, iPad or iPod touch, or your device is disabled - Apple supports