starting lightroom 4.1 error 64 bit, I get an error message

Similar Questions

• All of a sudden my 5.7 LR on win10 64-bit start fails with the error message something like "error reading from the cache of the preview... Please restart." reboot, repair, reinstall, or rename SLCache helps to repair.

  All of a sudden my 5.7 LR on win10 64-bit start fails with the error message something like "error reading from the cache of the preview... Please restart." reboot, repair, reinstall, or rename SLCache helps to repair.

  

  Hello

  Greetings!

  Close to Lightroom.
  Navigate to the location where the catalog is present (default value is within the pictures folder lightroom file)

  And delete the file previews.lrdata.

  Note: do not delete the catalog with the extension .lrcat file.

  Concerning

  Jitendra

• I can't download IOS 9.3.1 the download starts but then an error message appears and it stops. I have enough storage, so don't know why this is happening?

  I can't download IOS 9.3.1 the download starts but then an error message appears and it stops. I have enough storage, so don't know why this is happening?

  Does anyone else have this problem?

  It often happens when the screen times out and goes to the lock screen, when I connect to my phone that the error message is re-appeared?

  I have the same problem!

• "Cannot start Microsoft Office Outlook" error message when you try to click on a name or contact us on a Web site to send a msg email on Outlook/microsoft office 2003

  "Cannot start Microsoft Office Outlook" error message when you try to click on a name or contact us on a website to send an email on Outlook/microsoft office 2003 Vista OS msg. My laptop came with Microsoft Office 2007 TRIAL version, but I already had Microsoft Office Pro 2003, so loaded on when I got it almost a year ago. My trial expired months ago... but never uninstalled cause 2003 worked. Then I wanted to do something in WORD and kept pulling up the 2007 trial and was confusing, so I sent the 2007 trial stuff to recycle bin, but not yet the uninstall. Since then all of a sudden I started to get this error msg. I can open OUTLOOK very well... BUT I don't even use OUTLOOK at all. I send from comcast.
  1. How can I get rid of this error?
  2. does anyone know how I can get my comcast open up when I go to a website to webmaster option instead of defaulting to outlook? And I already checked, "set as my default" is NOT enabled in outlook.
  Help, please!

  Hello

  Please check with the experts of the Office and Outlook here: (re - ask your question in these groups)

  Discussions of Questions General Outlook
  http://www.Microsoft.com/Office/Community/en-us/default.mspx?DG=Microsoft.public.Outlook.General&lang=en&CR=us

  MS Office discussion groups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx
  And here:

  Microsoft.public.Outlook discussions
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Outlook&cat=en_us_81f401b3-b3fe-4e8d-B291-066f30b63ec8&lang=en&CR=us

  Office newsgroups
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.Setup&cat=en_us_642d5640-c1ba-43C3-A224-b3ec1473346c&lang=en&CR=us

  I hope this helps. Rob - bicycle - Mark Twain said it is good.

• Whenever I start the computer, the error message "QtCore4.dlll missing, reinstall" appears.

  QtCore4.dlll error message

  Whenever I start the computer, the error message "QtCore4.dlll missing, reinstall" appears. Where can I find it and how do I reinstall it?

  Hello

  ·         Have you try installation or uninstalling any program like the SIMS 3 on your system?

   

  Method 1:

  The problem could be caused by some startup item or services that is loaded at startup.

  I suggest you perform the clean boot on your system and check if it helps to resolve the issue.

  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note:

  After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

   

  Method 2:

  Most of the customers were facing this error by installing or playing SIMS 3 game, if you also face this problem while playing or to install this game, then you can check the link below and follow the steps provided by Shekhar S.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-gaming/qtcore4dll-missing-error-while-playing-Sims-3/02735e2a-2ff6-4D29-8C8C-0852605734e2

   

• When starting lightroom on the new drive 6 I get error - cannot find solution

  When starting lightroom on the new disk 6 (an old crashed) I get the message that serial number is already in use by the maximum number of computers...

  In 6 days I'll be off-license - quick help will be appreciated, I can't find a way to communicate with the service to the customer or support and look for here the solution is pretty much a cycle that repeats of frustration.

  Best for all

  Christophe

  I on a Mac OS 10.10.5

  LR 6 bought 2015

  Moving to download, installation, setting up

  Hello

  Please see "Activation limit reached" or "connection error impossible ' with Adobe applications

  Hope that helps!

  Kind regards

  Sheena

• Launch of Lightroom gives 0Xc00007b error message

  When I go to open lightroom I get an error message oxcooooo7b

  Post edited by: Abhijit Kr.

  Post edited by: Abhijit Kr.

  Hi Mhass0609,

  Please follow this article to fix the problem.

  http://helpx.Adobe.com/Lightroom/KB/error-Unable-start-correctly-0xc00007b.html

  Please let us know if it helps.

  Kind regards

  Abhijit

• I try to start the old T2150CDT - error message "not found reading drive C of the sector.

  Hello

  I came by one of them and trying to fire, but I get the message, "sector not found reading drive C". I get this message just after windows 98 logo appears.

  Problem is that I am limited in what I can do, because I don't have a floppy drive and back does not recognize the CD drive (missing drivers); Although I can hear it when starting upwards.

  So I out the HARD drive and pasted the installation windows 98 inside files. then tried to reinstall, but I still have the message of "sector not found reading drive C". The drive is too large (it's about 2.1 GB.)

  Install the right drivers for the CD Rom would allow me to install from a CD?

  It works usually
  Thank you
  John

  As far as I know the error message; "Sector not found reading drive C" appears because of these three reasons:
  -physical HARD drive failure
  -corrupted HARD drive file system
  -Bad RAM

  In the first case, you should try to format the whole HARD drive and should try to install the new OS.
  If it will not help, chances are that HARD drive is malfunctioning and needs to be replaced.

• Windows not start displays the following error message

  (X) /8130/ Realtek RTL8139 810 x
  Fast Ethernet PCI v. 2.16 controller (041224)
  PXE - E61: Media Test failure, check cable of
  PXE - MOF: Existing PXE Rom
  No Bootable - insert the startup disk, and then press any key
  When I insert the factory OEM disc, everything works well, but without it, the error message comes up what can I do to start normally

  discodazz1,
  The information you listed are oriented to the network card and he doesn't see any boot device.  The first thing I would do is to check the BIOS settings and make sure that your drive is seen correctly and that the boot order is set to boot from your 1st CD then your drive hard 2nd drive.  You will need to check with the PC manufacturer for assistance with the BIOS settings.

  Then I would try the steps listed in this thread: XP without boot troubleshooting

  If you are able to enter safe mode but not any other way or you can't in safe mode then I would do the following.

  If you can boot into Safe Mode with command prompt, or if you have a XP CD and you can boot into the Recovery Console, and then run the following commands.

  Chkdsk /r

  sfc/scannow (you will need an XP CD for this command)

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Unable to connect win7 starter to xp printer error message: "not enough server storage is available to process this command."

  When I tried to connect my Win7 starter Netbook on my HP C5280 printer shared in my XP Pro SP3 desktop computer, this error message until I install the appropriate driver

  PS:
  1 - Win7 allows me to choose the printer in XP to connect to.
  2 - I tried to create or increase the value of "IRPStarckSize" in the registry, in computers
   
  Thank you for your help

  Hello

  Thank you for your quick response.
  I solved the problem as follows:
  1 correct the evil of "IRPStackSize": instead, I wrote IRPStarckSize! " in the registry
  2. create / change the value of ""IRPStackSize ' to '25' in XP and Win7 Starter registry "
  4 - restart both computers.
  5 -Add a printer in Win7 starter, using 'Add a printer pop-up menu'
  6 - Select "create a new port. Select "Local Port" as the port type.
  7. in the "Enter a port name" box, type the address in the following format:
       \\ my XP Pro SP3 utilisateur\Mes shared the name of the HP C5280 printer 
  8 - click Next
  9 - Choose the appropriate driver in the list of drivers.
  If no driver available, click the Windows Update button, wait for the process finishes and then look for the
  driver again.
  10. complete the installation by printing a test page.
  Hope this will help other members of the Microsoft Community.
  PS installed anti software virus in my computer have no impact in my case.

• Cannot start the computer, the error message "Reboot and Select proper Boot device or Insert Boot Media in selected boot device and press a key any."

  Original title: can't access my BIOS, but blocked on select boot device

  I have a laptop Toshiba Satellite Pro. I gave up some time ago and removed the HARD drive to see if has been affected by the decline, as that was my first thought. "When turned on the laptop back, the error message:" Reboot and select clean boot device or Insert Boot Media in selected boot device and press a key. My HARD drive is installed correctly, that am a qualified technician. The laptop goes directly to this error message, when turned on, so cnnot access to the BIOS. Help, please.

  Hi Ryan,

  Please contact Microsoft Community. I will surely help you this question.

  To better understand the issue, let me know if you have tried pressing the F12 key or the key that is used to start the BIOS on the computer?

  Method 1:

  You may need to press the key (which is used to start-up the BIOS) as soon as you turn on your computer before Windows starts. See the article for more information.

  http://forums.Toshiba.com/T5/Windows-7-knowledge-base/how-to-enter-the-system-BIOS-on-Windows-7-computers/Ta-p/275629

  Method 2:

  If the problem persists, I suggest you to return the item and check if it helps.

  What can I do if my laptop Windows 7 or Windows Vista does not start?
  http://forums.Toshiba.com/T5/computer-troubleshooting/what-can-I-do-if-my-Windows-7-or-Windows-Vista-laptop-won-t/Ta-p/285717

  If the problem persists, I suggest you to contact the Toshiba Support for assistance.

  http://support.Toshiba.com/support/home

  Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you further.

• Lightroom 4 - Import Error Message "no files can be copied to the backup location.

  Hi people! I hope that someone can help you.  All of a sudden, I get an error message odd when I import into lightroom 4.  "File could not be copied to the backup location.  I can click OK and continue to work as usual. I see my pictures, everything seems ok. When I export, backup works fine without error message.  I get nervous on error messages in LR.  Any help would be greatly appreciated.  Thank you!

  You have the option checked to create a backup copy of the images imported in the import dialog window? If you verify that your username has write permissions to the folded selected as a backup location.

  Or just uncheck that option and test.

• Export CC Lightroom ver 5 error message

  I have been using Lightroom CC 5 on a PC for a while using any of the default catalog.  I just created a second catalogue and now when I export from a catalogue, I get the error message below.  Please tell me what I should do to fix this problem.

  
  
  

  Hi rfinbow

  See post-processing of your export dialog box:

  In the drop-down list to "after export: ', make sure you have a valid entry selected (choose 'Status quo' If you do not have special needs).

  

  Let us know if that helps.

  Kind regards

  ~ Mohit

• How to load silver efex pro 2 as plug in Lightroom 5 without error message

  I get an error message when I try Silver Efex Pro 2 adds the sheet in the list in Lightroom 5.  How to load correctly?

  Thanks in advance,

  F William Baker

  Dallas, Texas

  Please try the below link that might help:

  Error "Unable to load Image" - Nik Collection help

  Plug-ins do not appear in Lightroom after installing - Nik Collection help

  If the issue still persists, please uninstall it and install it by in below link:

  Installation - Nik Collection help

  (click on free trial download on the page above, you can activate it later)

  Please let us know if you need more information.

  ~ Sarika

• First Pro CS5.5 never started place... error message each time. Help please?

  Hello...
  
  I recently bought the suite Production Premium CS5.5.
  
  Most of the work programmes. (I have not tried ALL the.) But the main - CS5.1 Photoshop and After Effects - work perfectly).
  
  But first Pro CS5.5.0 does not open. Keeps giving me the good old error message: "Adobe first Pro CS5.5 has stopped working". What happens whenever I try to open it. And it is never past the opening screen. He is MIGHTY frustrating. And there seems to be no coherent advice in this field all over the Adobe Forums. Maybe I've not spotted.
  
  I run a Fujitsu Lifebook T901, using Win 7 64 bit Version Service Pack 1 Build 7601 6.1.7601
  
  Processor Intel (r) Core i7 - 2620M 2.70 GHz, 2701 MHz, 2 Lossnay, 4 logical processors
  
  Version of the FUJITSU BIOS/Date / / Phoenix Technologies Ltd Version 1.04, 17/02/2011
  
  8 GB of RAM.
  
  Please guys... what should I do?
  
  Operating system: Windows 7
  Printer model / version of the driver: Intel HD Graphics Family
  Video display card / driver version: 8.15.10.2246
  He has already worked? If so, what has changed? (provide comments in the description field): No.
  Same results with different files? : not Applicable
  Same results with different computer? : not Applicable
  Change recent system hardware or software? : no

  Alan is correct.

  Here is an overview of the system requirements:

  http://www.video2brain.com/en/videos-5351.htm