Starting MozillaAgent, _ex - 68.exe, program is legitimate?

Similar Questions

• All the ' * .exe ' programs will not start by simply clicking on the shortcut icon.

  All the ' * .exe ' programs will not start by simply clicking on the shortcut icon.  I need a right click and select "Run as Administrator" to get the program to run. By clicking on the left, a box opens, which says "Windows cannot open this file: file iexplore.exe (example)". ""  It then goes on to ask if I want to use the web or select a program from a list of installed programs. Is there a way to get this back to "normal"?

  Hello

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be harder to detect as
  the cause.

  No one program cannot be used to detect and remove any malware. Added that often easy
  to detect malicious software often comes with a much harder to detect and remove the payload. Then
  its best to be thorough than paying the high price later now too. Check with them to one
  extreme overkill point and then run the cleaning only when you are sure that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
  the regular windows when you can.

  TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN
  It will display all the infections in the report after you run - if it will not run changed the name of
  TDSSKiller.exe to tdsskiller.com. If she finds something or not does not mean that you should not
  check with the other methods below.
  http://support.Kaspersky.com/viruses/solutions?QID=208280684

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/products/malwarebytes_free

  SuperAntiSpyware Portable Scanner - free
  http://www.SUPERAntiSpyware.com/portablescanner.HTML?tag=SAS_HOMEPAGE

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
  security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
  here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp?prevx=Y  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  -----------------------------------

  Original version is now replaced by the Microsoft Safety Scanner
  http://OneCare.live.com/site/en-us/default.htm

  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  ----------------------------------

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  After the removal of malicious programs:

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
  system files.

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  ======================================

  If necessary AFTER you are sure that the machine is clean of any malware. (DO NOT USE IF)
  MALWARE IS STILL PRESENT).

  You can try a repair install or an upgrade in Place.

  You can use another DVD that aren't copy protected but you you need to own
  Product key. It must be the same version 32 or 64 BIT Vista OEM. Also the system
  machine to usually sell the cheap disk since you already own Windows. Don't forget to make a
  good backup or 3 (security in redundancy).

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  =======================================

  For extreme cases:

  Norton Power Eraser - eliminates deeply embedded and difficult to remove crimeware
  This traditional antivirus analysis does not always detect. Because the Norton Power Eraser
  uses aggressive methods to detect these threats, there is a risk that it can select some
  legitimate programs for removal. You should use this tool very carefully and only after
  you have exhausted other options.
  http://us.Norton.com/support/DIY/index.jsp

  ================================

  If you are in North America, you can call 866-727-2338 for virus and spyware help
  infections. See http://www.microsoft.com/protect/support/default.mspx for more details. For
  international information, see your subsidiary local Support site.

  Microsoft support - Virus and Security Solution Center
  http://support.Microsoft.com/contactus/cu_sc_virsec_master?ws=support#TAB0

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• virus informatique---C:\windows\temp\_ex-08.exe

  Hello all I found it in my computer program following a virus control antivirus, just need to know if it ia a virus, so I can remove it, thank you

  http://www.google.com.au/search?hl=en&source=HP&q=_ex-08.exe&Meta=&aq=f&OQ=

  Read the info at Google re _ex - 08.exe, explaining that it is a Malware.

  Also analyzed with this Anti-Malware program to ensure she and her 'friends' are really part of your machine:

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight.

  How to use Malwarebytes after installation:

  1. open Malwarebytes > click the update tab at the top > get the latest updates.

  2. on the Scanner tab, make sure that the Perform quick scan option is selected and then click on the Scan button to start scanning your computer

  3 MBAM will now start to scan your computer for malware. This process can take some time.

  4. when the scan is complete, a message box will appear

  5. you must click on the OK button to close the message box and continue the process of Malwareremoval.

  6. you will now be at the main scanner screen. At this point, you must click on the button to view the result .

  7. a screen showing all of the malware displayed the program that is

  8. you must now click remove selection button to remove all the listed malware. MBAM will now delete all of the files and registry keys and add them to the programs quarantine. When you remove files, MBAM may require a restart in order to eliminate some of them. If it displays a message stating that it needs to restart, please let him do. Once your computer has rebooted, and logged in, please continue with the remaining steps.

  9. when MBAM has finished remove the malware, it will open the scan log and display it in Notepad. See the log as desired, and then close the Notepad window.

  10. you can now exit the MBAM program.

  See you soon.

  Mick Murphy - Microsoft partner

• Satellite P100-238 hangs after a svchost.exe program error message:

  PC: Satellite P100-238 of December 2006.

  about a minute after the start, I get an error message:

  Danish:
  Svchost.exe - programfejl
  Speicherbausteinen ved '0x745f278o' refererede hukommelse ved "0x00000000." Hukommelsen kunne ikke 'read '.
  Klik OK p for afslutte program.
  Klik p Cancel in the fejlfinding udfe I prioriterede.

  English translation:
  Svchost.exe - program error
  Statement on memory refered "0x745f278o" on "0x00000000." Memory could not be "read".
  Click OK to terminate program
  Click Cansel to to search for error in the program.

  After the error message above the PC crashes completely and I can only turn off by the power button.

  What happened with my PC?
  What should I do?
  How can I access my data to make a backup?

  Hello

  I have goggled a bit on the net for more help and I was surprised that many Windows users have had the same problem
  So I thought that there must be something wrong with the windows operating system generally.
  I studied a bit in the MS knowledge base and found this:
  http://support.Microsoft.com/kb/916089/en-us

  According to the news of MS this problem may occur when you have Microsoft Office installed and trying to the Agent Windows Update find updates for Windows Installer.

• "dsca.exe program has stopped working".

  At startup I get an error message indicating "dsca.exe program has stopped working" how to fix this?

  dsca.exe is a Dell program used with, it of the support center and is not necessary to run at startup.  Go to http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx and download, install and run Autoruns.  Pass the all tab.  Check all the items until you find the one who mentions dsca.exe or appears related to Dell (check all the items in the list because there may be multiple entries).  For each entry, uncheck the box to prevent it from start to start, and then click OK.  Restart the message should be gone (and you not have lost all functionality to your system by doing this).

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• LXCYtime.exe program does not

  Whenever I turn on my laptop, a pop-up message will appear informing me this lxcytime.exe program does not work. The pop-up message and then asking me to close the program and changes that Microsoft will advise me if a solution is found. Not heard anything more. How can I fix it & and/or stop the message appearing everytime I turn on my laptop?

  Hello

  1. do you remember any installed program associated with lxcytime.exe?

  2. you remember any changes made to the computer before the show?

  Method 1:

  You can put your boot system to solve the problem.

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts. This article describes how to solve problems in Windows Vista or Windows 7 by performing a clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 of the above article.

  Method 2:

  You can run a full scan of the computer by using the Microsoft Safety Scanner and check if this solves the problem. For more information, see the following link:
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Let us know the results!

• sdnclean64.exe program not found - skipping Autocheck

  sdnclean64.exe program not found - skipping AUTOCHECK

  I get this error at the start of Windows 7 Home Premium. Anyway I can get this executable so Windows will do his boot cleaning function?

  Thank you

  Chris

  Thank you for responding.

  http://www.TomsHardware.com/Forum/349353-33-help-system-randomly-crashes-installing-7870

  There were known issues with this particular GPU from ATI/AMD.  Surprisingly, the card works fine with an old motherboard Asus, I have in a previous version. Given that the system has an activated copy of Win 7 Ult on it, I still have in service and access it through my main machine via the desktop remotely (product activation and DRM took some of the fun of upgrading material - I see it as an evil necessary.) Companies have the right to intellectual property, but it becomes more expensive to upgrade if you need to buy a new license every time you change on your motherboard). The guys at Asus even suggest to use an older driver for the card on my main machine. I submit all my screenshots and a dersription of the problem to technical support at AMD. If all goes well, they'll find a fix fo as they did for the TLB bug Phenom processors original back in early 2008.

• VI to run the .exe program

  Hello

  use of labview to activate and run a .exe program located in a specific folder on the c drive?

  When I run the program .exe manually from the command prompt I navigate to the desired folder, and then enter "runapplication.exe" to run the compiled c code.

  I've searched the forums labview but especially articles relating to the creation of executables labview or labview .exe programs.

  Also could call or run the TestSTAND .exe program without having to create a VI?

  Thank you

  try System exec.

• Cannot open .exe programs in XP except MS IE - ask "open with - choose the program you want to use to open this file.

  Any of the My .exe programs such as office, Firefox, Skype can be opened from desktop file icons or programs. Request to the dialog box opens: "open with, choose the program you want to use to open this file" - but only lists MS programs that don't work, or "error - Application not found". Only the program that works is MS IE.

  Looks like your Windows file associations have to dispose. This means that XP is not
  know what to do with the files by looking at the file extension (for example, .exe for executables,
  .doc for MS documents, etc.).

  If you don't have it you, something done for you - most likely malware.

  Go to this site WWW by Doug Knox:

  http://www.dougknox.com/

  On the left, click on the Win XP fixes, file Association fixed and read the instructions at the top of the page.

  Download the EXE File Association Fix on your desktop, unzip the file and apply it by following the instructions at the top of the page, then to restart and test.

  Run the following scans for malware, and then fix any problems:

  Download, install, update and do a full scan with these free malware detection programs:

  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.

• The desktop icons are not open with a double or click context - programs can still start through the list of programs.

  Original title : Double click on icon it does not open and when I right click it Office of the menu drop-down does not appear.

  Programs can always be started through the list of programs.

  Hello

  ·         Were there recent changes made on the computer before the show?

  ·         You are able to add a shortcut on the desktop?

  I suggest you run this Microsoft Fixit tool and check if it helps.

  Difficulty of broken desktop shortcuts and common system maintenance tasks

  http://support.Microsoft.com/mats/system_maintenance_for_windows/en-us

• How can I find out what programs I should have started and what are the programs I can start myself to my computer to run correctly when starting?

  * Original title: startup

  How can I find out what programs I should have started and what are the programs I can start myself to my computer to run correctly when starting?

  Hello

  I understand you want to learn about programs, you should start your Windows startup. I will certainly help you to question.

  When you start Windows by using a normal startup startup, several applications and services automatically, and then run in the background. These programs include the base system, antivirus software, utility applications processes system and other software that was previously installed. These applications and services may cause interference when you install or run a program.

  The system configuration is a tool that can help identify problems that might prevent Windows from starting correctly. You can start Windows with common services and startup programs turned off and then reactivate them, one at a time.

  I suggest you to refer to the links below and check if this is useful:

  Using the Configuration System (msconfig)

  Perform a clean boot to determine if background programs interfere with your game or program

  Hope this information helps.

  Please get back to us with an update on the issue, we will be happy to help you.

• How to restore error. EXE program

  Hi, I have a problem. My brother was accidentally make EACH executable. EXE programs open in uTorrent. Anyone know how to restore it back?

  Download and apply. Difficulty of recording association EXE file types here:
   
  Difficulties of file Association for Windows 7:
  http://www.Winhelponline.com/blog/file-Asso-fixes-for-Windows-7/
   
  (FYI, the REG file is a file in plain text that you can open with Notepad, where you need to check its contents before the merger).

• The FTP.EXE program included in Windows 7 and Server 2008 help the PASV Mode connection

  What is the FTP.EXE program included in Windows 7 and Server 2008 helps to connect in PASV Mode?

  I ask because I had a strange experience with her. First, I will mention that I did hours of research and found many articles stating that it does not work in XP/2000/Server 2003, but I found nothing for Windows 7 or Server 2008.

  I found some people who kept him at work and others who could not. I tried with Windows Firewall turned off and will be on and firewall rules created. Others said it is not supported and that I should use a third-party FTP client. I could make it work in Internet Explorer and Windows Explorer. I am well aware of the situation these options in Internet Explorer.

  Here are the best real, I could run from the command line on my PC Windows 7 (32 bit), but not on Server 2008 64 bit.

  Now, before someone comes and asks me to check the firewall, I want to mention that I tried more than five clients of third-party FTP Server 2008 and they all worked perfectly. In addition, from the same Server 2008 it worked fine in IE and explore.

  On Windows Server 2008:

  FTP client blocked on: 150 opening data of channel for the directory list.

  Windows 7:

  C:\Users\wxk1>Systeminfo | b/findstr/c: "Name of the OS" / c: "Version of the OS.
  Name of the operating system: Microsoft Windows 7 Enterprise
  OS version: 6.1.7601 Service Pack 1 Build 7601

  C:\Users\wxk1>FTP ftp.secureftp - test.com
  Connected to ftp.secureftp - test.com.
  220 - FileZilla Server version 0.9.39 beta
  220 - Written by Tim Kosse (* address email is removed from the privacy *)
  220, please visit http://sourceforge.net/projects/filezilla/
  User (ftp.secureftp - test.com:(none)): test)
  331 password required for test
  Password:
  230 logged on
  FTP > dir
  200 port command successful
  Data channel opening 150 to the directory list.
  -r - r - r - 1 ftp ftp bookstore.xml 1471 25 June 2007
  -r - r - r - 1 ftp ftp 279658 25 June 2007 hamlet.xml
  -r - r - r - 1 ftp ftp 80641 25 June 2007 hamlet.zip
  -r - r - r - 1 ftp ftp 2164 japanese.xml 25 June 2007
  -r - r - r - 1 ftp ftp 0 July 3, 2007 the new text Document .txt (2)
  -r - r - r - 1 ftp ftp 0 3 July 2007 new document texte.txt
  -r - r - r - 1 ftp ftp 4677 25 June 2007 nutrition.xml
  -r - r - r - 1 ftp ftp 8463 pigs.xml 25 June 2007
  -r - r - r - 1 ftp ftp 7581 25 June 2007 plants.xml
  drwxr-xr-x 1 ftp ftp 0 subdir1 June 25, 2007
  drwxr-xr-x 1 ftp ftp 0 subdir2 June 25, 2007
  226 transfer OK
  FTP: 697 bytes received in 0.01Seconds 46.47Kbytes / s.
  FTP >

  Also, I do not install a server FTP PASV will be IIS 7 or anthing like that, just try to connect to a server FTP PASV. Here is the test server that I used:

  http://www.SecureFTP-test.com/

  Type	FileZilla
  Address	FTP.SecureFTP - test.com
  Opening of session	test
  Password	test

  Details on using

  Chilkat provides this FTPS test account for all those wishing to test the secure FTP client functionality. You can connect to ftp.secureftp - test.com, connect as a 'test' with password 'test' and download that all files present on the server. The "test" account can also retrieve entries in the directory. There is, however, no downloading files on the server.

  Hello

  The question you posted would be better suited to the Technet community. Check out the link and ask the question.

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• Could not start / run SitesExplorer / ContentServerExplorer.exe (11.1.1.8.0) on Windows 7 64 bit

  Hi all

  I was able to start / run SitesExplorer / ContentServerExplorer.exe (11.1.1.8.0) on Windows 7 64 bit

  error starting turning

  "This application has failed to start because its side by side configuration is incorrect. "

  " Please see the application event log or use the command-line sxstrace.exe for details."

  Picture AFP for reference "ContentServerExplorer_error.png".

  Where as on my system still Sites runs correctly.

  Kind regards

  Anoop.

  I had not myself but a quick search suggests this may occur if VC ++ and Visual Studio is installed also, causing the SitesExplorer to load one different version of the C++ runtime other than that it provides. Event log Windows could give more details.

  Please see

  http://www.chiefarchitect.com/support/article/KB-01046/

  and

  http://support.Microsoft.com/kb/2525435

  for suggestions how to solve.

  Phil

• Receive the following start-up error message up to: 'sasnative32bddel.exe program not found - skipping autocheck.

  Whenever my computer starts it gets to the 'microsoft corporation' green loading bar then displays this message 'sasnative32 program not found - skipping autocheck. She disappears and start the computer as usual. How can I stop this from happening?

  I am running windows vista business 32-bit

  I found that the... entry sasnative is implemented by Lunarsoft software (I wonder if they are related to Lavasoft).

  If you had a few Lunasoft stuff installed and uninstalled lately, it sounds like it is not cleaned up after himself.  It's the same thing that happens with software Lavasoft - lack of hygiene.

  You must eddt your registry database and change this:

  autocheck autochk *.
  AutoCheck sasnative32bddel.exe

  At the entrance of XP by default, which is the following:

  autocheck autochk *.

  Just position the cursor and delete the entry so it's back to the normal and reboot.