StartScen.sh-> ODI-1423: working repository is not related to the master rep

Similar Questions

• ODI-10150: repository to work with ID 1 is not related to the master

  Hello
  
  ODI 11 g (11.1.1) with Database 11g r2
  
  I created the Master repository (odimrep) and
  repository (odiwrep) of work, created from topology
  Before the next step, during this time I was able to connect to connect to the repository of work and able to do all the work
  
  
  
  I then created the repository of topology (odierep) running, successfully created.
  After that, I could not able to connect to the repository, work, I get the following error message
  

  oracle.odi.core.config.RepositoriesNotBoundException: ODI-10150: Work repository with ID 1 is not bound to master:
       Definition in master ID:1, Name:ODIWREP, Timestamp:1337006142714
       Definition in work  ID:2, Name:ODIEREP, Timestamp:1337006565503.
  
  .....
  .....

  Could you please let me know what I'm doing wrong configure the repository of the execution, I have to drop everything and start to recreate
  
  
  Any help would be greatly appreciated.
  
  Thank you

  Hello
  It shouldn't really create any problem, if you create a working repository two differenct IDs. But the error messages you gave says, it's something to do with the repository IDs. Usually, we get this message when trying to migrate the code ODI within environments. However, it does not rise as an error message, just gives information and asks us if we want to save the new code repository work. We just need to say Yes and continue.
  I suggest to all again, re-create repositories again. Maybe something went wrong when creating repositories.

  Kind regards
  k

• I have a Microsoft ISATAP compaq6715b #4 adapter not work and can not get on the internet about this updated driver

  I have a Microsoft ISATAP compaq6715b #4 adapter not work and can not get on the internet about this updated driver

  See the following article:
   
  On a Windows Vista-based computer or on a Windows Server 2008-based computer, the Microsoft ISATAP map appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message
  http://support.Microsoft.com/default.aspx?scid=KB; EN-US; 932520

  Make sure your network connection is working and properly configured.

  You can try to uninstall and reinstall the Microsoft ISATAP adapters using the following steps:
   
  In Device Manager, this adapter under network adapters and are hidden so you need to click the view menu, "Show hidden devices".
   
  1. in the Device Manager, right click on the element of Microsoft ISATAP adapter #4 and choose uninstall.
   
  2. in Device Manager, click on the "Actions" menu and select "Add legacy hardware.
   
  3. click Next, then select "Install the hardware that I manually select from the list (user)", click Next.
   
  4. Select "Network adapters" under common hardware types, and then click Next.
   
  5. Select "Microsoft" to the title of manufacturer and "Microsoft ISATAP Adapter" in the title of the network card.
   
  6. click Next and follow the remaining instructions.

• Firefox worked, today has not started with the error the version of this file is not compatible with the version of windows you are using.

  Computer is Windows 7 Ultimate 64 bit. Firefox has work fine for over a year on this computer. Nothing has been changed or updated updated except Windows update indicates that it installed updates on August 19. I had computer week before because only out of town, back entrance and began August 18, but Firefox has worked that day. Does not use FF again until today. Today August 22, firefox does not start, shortcut icon changed program not there. Exe in the folder when you click Poster error message says the version of this file is not compatible with the version of Windows, I am running. Exe of Firefox shows created on 20 August. I suspect the update, Windows or FF but lean towards windows, which was spent, who broke things. I noticed that IE 10 updates, updates of .NET framework and the malicious software removal tool have been installed. I tried to restart the computer, has not set. Tried to run as administrator, did not work. I don't want to uninstall FF, at least have to because of all the things I have here, bookmarks, last past passwords, etc..

  Hello

  Some Firefox problems can be solved by performing a clean reinstall. This means that you remove Firefox program files (not the profile folder, where the bookmarks are stored) and then reinstall Firefox. Please follow these steps:

  Note: You can print these steps or consult them in another browser.

  1. Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
  2. Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
  3. Remove the Firefox installation folder, which is located in one of these locations, by default:
     • Windows:
       • C:\Program Files\Mozilla Firefox
       • C:\Program Files (x 86) \Mozilla Firefox
     • Mac: Delete Firefox in the Applications folder.
     • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
  4. Now, go ahead and reinstall Firefox:
     1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
     2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

  Please report back to see if this helped you!

  Thank you.

• Satellite A300 - Webcam does not work and is not listed in the devices

  The web does not work the room, resettled several times drivers is not helping with the list of the facilities in the room is not present.
  What should do?
  Satellite A300 psag0e

  Drivers webcam sex cam live-20080616124250

  Hi maestro2118,

  Since when did you notice this behavior and what operating system is installed?

  Before install or reinstall a driver, I recommend you to remove the old driver first. Then, restart your computer and run CCleaner to remove old registry keys. A reboot, and you can install latest driver of the webcam of Toshiba page.

  Check this box!

• touchpaded works but does not scroll to the bottom of the page

  all my scroll pad will do is move the mouse pointer. the section wavy on the side is no longer scroll the page. I noticed after I went to msconfig and off startup programs. next time, I received my mobile scrolling did not work. I tried to turn it back on all programs and restart, but it does not work. I have also redownloaded the driver and that no longer works

  It's a hp pavilion dv4405nr

  OK, if went to the start menu and makes the recovery of the pc and it works now. Thank you all

• Windows 7 converter for .dvr_ms to .wtv files works sometimes, but not always, on the .wtv MCE with only audio files.

  I use MCE to record radio in wtv format programs.  Then, I want to convert them to the mp3 format for general use on other devices (including another computer running Windows XP).  The first step in this conversion is at stage of wtv to dvr_ms.  For the most part, it works, but sometimes I get an error message.

  Error message indicates that the content is not compatible with the dvr - ms format.  Any ideas what this means?
  Other ideas to get directly in .mp3 format without buying third-party paid software?

  I used MC-TVConverter (MediaCenter TV Converter) to convert video files Windows Media Center successfully in other formats.  I have not tried audio only & I have no examples at hand to try, I'm afraid.

  Its forum has a discussion of the issues of HD

  http://experts.Windows.com/FRMS/windows_entertainment_and_connected_home/f/25/t/95829.aspx

• WIN VISTA: After installing new drivers through the utility Dell to keep the PC to date, DVD not working anymore (and not located in the bios Setup)

  When starting, it not recognizing my DVD drive more.  I went into the bios setup and it does not appear in there.   I have to re - install the bios?  or ....???

  Hello

  If the drive does not appear in the BIOS, there is a hardware problem - either with the player, wiring,
  or the motherboard interface circuits.

  Check with a real computer store (the one that makes its own internal circuits and not of leeks and poster
  a Best Buy or other stores) or Support of Dell.

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/
  I hope this helps.

• Auto-Flow does not formatting to the master

  I'm placing a Word 2010 document in an InDesign document with facing pages. The text of the Word document up correctly, but the formatting does not work.  For example, if I have three columns in both of my Master pages, "automatic formatting" place in two columns and the top and bottom margins (height) are too high and too low.  Any idea what could go wrong?  Here's the Master pages.

  

  This is the first release after auto-flux (note two columns):

  And the second (two columns and margins hurt).

  Thank you!

  Steve and Peter,

  Thank you for having responded (I was expecting a notification by E-mail of responses, otherwise I would have responded earlier).

  It turns out that it seems that something was wrong with my master page. I had a similar master page in the same document, and it auto-coulait the same text Word with no problems, so I made a copy of the master page and used with complete success.

  I deleted (slight) to the original master page, I'd probably not able to recreate the same problem to understand what happened.  In practice, I don't need to know anyway, because everything works well now!

  Thanks again.

• Custom Quiz with master Widget are not related to the LMS (Captivate 5.5)

  Hello

  I wrote a quiz with partial credit and, in order to make answers, I use the master Widget. (A big thanks to Lilybiri and Infosemantics for all the advice I found in blogs and learning classes!)

  In summary, the quiz is composed of 2 questions with 4 possible answers.  Each of the 4 answers have a different score attached to it (i.e. to answer a = 4 points; Answer b = 3 points answer c = 2 points; Answer d = 1 point).   On each slide of the question, I have added a Master Widget (using the variable representative points the student received as a slave).  I want the quiz to report the score for each question.   After the student has answered these two question slides, they continue to a slide 'results '.  Here, they consider the total of their scores and get your comments on if their total is high, too low or online.  On the results page, I used the master Widget itself to make the quiz on the total score.

  I downloaded this quiz as a package SCORM 2.3 Moodle and Blackboard 9 (we are different systems LMS to test).  The short quiz in each LMS, but when I try to access a report, I get no results: no report received for each item quiz and no total score points.  Indeed, in the table, I get a blank page:

  

  In Moodle, I get:

  

  Here's what to look like my quiz preferences:

  

  I'm really stuck.  I realized there are many components to this process and I really need help to find out where the problem lies.

  Thank you for your time and help!

  Bray,

  Yes the numbers on the slide of questionnaire results are important because they indicate that some of your widgets or other interactive objects are not reported to the "official" quiz score

  You must go back and check the objects you want to appear in the score.  The score of 67% reported by the quiz on the quiz results slide probably means that Captivate think you have only three objects within the quiz and only two of these (two-thirds or 67% in round numbers).

  You mentioned before that you have three Master widgets in this project.  How many of them can be found in the report for the quiz?  To check if they are all considered to be successes, turn on Success and Failure subtitles for these widgets, and then run through your interaction.

  When you use a Slave to Variables with the master of widgets for partial credit, remember that even if the captain widgets can account for these variables as being interactive objects, Captivate does not work.

  Although the captain widget is VERY powerful, it also tends to mess with minds, because there are SO many ways you can configure. If you use partial credit, check if you have the option to bypass the assigned score own widgets with the total score of points from the slave value objects.  If you use this option, you must ensure that at no time can the substituted score not fall within the range 0-100% compatible SCORM LMS will accept.

• Error of FK constraint on update for areas not related to the

  I'm an integrity ORA-02292 constraint violation when you try to update a table that has a FK to another table constraint. The areas that I update are not fields that have attached constraint. Here is the SQL script to reproduce the problem.
  
  DROP TABLE PERMIT_EXT;
  DROP TABLE PERMIT_EXT_INSPECTIONS;
  PERMIT_EXT_ID SEQUENCE OF FALL;
  
  CREATE TABLE 'PERMIT_EXT '.
  (
  'ID' NUMBER (9.0) PRIMARY KEY,.
  'THE AGENCY' VARCHAR2 (10 BYTE) NOT NULL ACTIVATE.
  ACTIVATE THE "PERMITID" VARCHAR2 (20 BYTE) NOT NULL,
  ACTIVATE THE "TITLE" VARCHAR2 (100 BYTE) NOT NULL,
  "PERMIT_EXT_AGENCYID" UNIQUE CONSTRAINT ('THE AGENCY', 'PERMITID')
  )
  ;
  
  CREATE THE SEQUENCE "PERMIT_EXT_ID" MINVALUE MAXVALUE 1 999999999 INCREMENT OF 1 START WITH 1 NOCACHE ALL NOCYCLE.
  
  CREATE OR REPLACE TRIGGER "ON_INS_PERMIT_EXT" FRONT
  INSERT OR UPDATE ON permit_ext FOR EACH ROW
  BEGIN
  SELECT permit_ext_id.nextval IN: double new.id;
  END;
  /
  ALTER TRIGGER 'ON_INS_PERMIT_EXT' ACTIVE;
  
  CREATE TABLE 'PERMIT_EXT_INSPECTIONS '.
  (
  ACTIVATE THE 'ID' NUMBER (9.0) NOT NULL,
  SELECT "TYPECODE" VARCHAR2 (10 BYTE) NOT NULL
  );
  
  ALTER TABLE PERMIT_EXT_INSPECTIONS
  ADD CONSTRAINT PERMIT_EXT_INSPECTIONS_FK1 FOREIGN KEY (ID) REFERENCES PERMIT_EXT (ID)
  ENABLE;
  
  -SAMPLE DATA
  insert into PERMIT_EXT values (null, 'CITY', 12345, 'ABC'); -ID 1
  
  INSERT INTO PERMIT_EXT_INSPECTIONS VALUES (1, 'A');
  INSERT INTO PERMIT_EXT_INSPECTIONS VALUES (1, 'B');
  INSERT INTO PERMIT_EXT_INSPECTIONS VALUES (1, 'C');
  COMMIT;
  
  update the title set permit_ext = 'DEF' where id = 1; -MISTAKE HAPPENS HERE, EVEN IF THE TITLE IS NOT THE FK ID IS

  Your problem is in the trigger. You update the pharmacokinetics of the permit_ext on the update. The trigger should be that when inserting.

  John

• Analog microphone does not work - SoundMAX does not appear in the Panel

  I can't get my mic to work.  I know not if I get SoundMAX appears in the control panel I could double click above and make the necessary adjustments for the computer to recognize my micro - such as the use of the microphone Setup Wizard.  Because I can not access the dialog/window to SoundMAX, is there another way to troubleshoot my microphone?  The Jack on the back of the computer is pink and I tired a pink and green microphone connector.  The funny thing is that if I put my output-power of my mp3 player jack in pink computer microphone hole, I am able to save.

  A few details: I have SoundMAX digital 5.12.1.7000 audio installed and it works and activate properly according to Device Manager.  However, in the "Audio Devices" folder there is no exe file that I could double-click and open.  The other machine I have an exe file in the folder that allows me to double click it and open the window to SoundMAX interface.  I have 'micro' checked (as opposed to the line-in) and it isn't mutted.  I unchecked Microphone Boost. My computer is a Dell Optiplex GX280 running Windows XP.

  I experienced this same problem during the installation of Windows on the machine of a friend running XP and soundmax drivers. When I first installed the audio drivers, I used Device Manager and he gave the location of the folder where the drivers were stored, allowing it to manage the configuration. The drivers have been installed, but the control panel and the options were not. Upon restart, the microphone did not work.

  I then went back and reinstalled the drivers by browsing to the folder source driver and by launching the setup.exe file. This time, the soundmax Control Panel was installed and the microphone began to work. Perhaps, you encounter the same problem.

  My advice is to download the soundmax drivers and run the setup.exe file and see how it works. It looks like the rest of your settings are OK.

• Windows 7 message pop-up cigarette... "local area connection adapter does not work correctly. Problems related to the pilot experience or material"what the devil does that average and that the devil can do?

  When I logged on this morning, Windows 7 gave me the following message... "The connection to the local network problems hardware or driver. For connection to the local network adapter does not work correctly. "My Windows offered solution was go using Windows.  Help

  Hello

  Try to uninstall and reinstall the network adapter drivers.

  Download the latest drivers from the card manufacturer support page.

  Download the drivers and extract them to a folder of your choice.

  In Device Manager, right-click on the adapter.

  Click Update drivers and choose her browse my computer for drivers.

  Choose let me a list of choices, click on disk and point to the folder with the drivers.
  ---------------------------

  Computer network health.

  Check the Device Manager for the entry of valid card of the wire.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a Local Area Connection icon/entry, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  Connect you to the menu of the router from a work computer and make sure DHCP is on, and it is configured to assign IPs which can cover the number of computers that are connected (a bit more will be even better).

  Turn off the computer and the router, reset the router and the computer.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  On the State of intellectual property.

  TCP/IP and its variables usually look like this.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  Typical TCP/IP status looks like this.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.
  
  Physical address is the MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.
  
  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2 There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

  ------------------------

  Also, make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq.html#trusted

  Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Windows 7 backup works, but does not appear in the backup and restore control panel

  I have Windows 7 Pro and have had a running backup on a network drive for a couple of years now.  So far it has worked well.

  Recently, my wife asked me to postpone this off-peak hours and I went directly to the Task Scheduler and update annex it.  I also had to modify the scheduled task to wake up my laptop computer to perform the backup.
  Now, after making these changes, I can see the event log that the backup started at time exact (01:00) he succeeded 30 minutes later.  I can also see on my network drive that it saved at the right time and the registry keys indicate the location of the network right.  However, when I go in the backup and restore control panel, he told me to "backup Windows has not been setup" (which previously he would show me the network location and the last backup time and the other at the request of autonomy.)
  I know that backups are still viable can I do a restore to the correct network location and properly, it shows me that I have backups on this drive.  So, why the backup and restore screen is now showing me that no backup copy has been put up any ideas?
  I'm a little worried that this change to the schedule has whacked a key somewhere that is using the backup and restore screen and finally the backups will fail and I don't notice unless I am constantly reviewing the event logs (which, for domestic use, isn't it convenient for me).

  Tim,

  You can find this useful thread.

  Fake message "Windows backup has not been implemented":
  http://social.technet.Microsoft.com/forums/en-us/w7itprogeneral/thread/d4b64dd2-CD98-4d51-97F2-1cc7865c6886

• "work online" button not showing on the bar tools either when I'm connected thro a VPN or not

  I need to access my server as I operate a portable remote I can connect through a VPN and access server but I cannont 'work online' as the button appears in my toolbar until recently this worked perfectly

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums:

  http://social.technet.Microsoft.com/forums/en-us/winserverNIS/threads