Error of FK constraint on update for areas not related to the

Similar Questions

• Update for Internet Explorer 8 Compatibility mode list for Windows Vista (KB982632) cannot install with the error details: Code 80070490 & also update for Windows Vista (KB981793) with the details of the error: Code 80070490

  I am running windows vista Home premium, on a system 32-bit HP Pavilion dv9700 op.  I have internet project 8 service pack 2 of windows and norton security suite installed on my computer.  I do not understand why these 2 updates keep do not install unless it didn't, but they are listed under important updates in the windows updates, can you please help me, maybe I don't have not enough memory on the left?

  Thank you!

  Windows Update error 80070490

  If you receive the Windows Update 80070490 error, it means that a file (CBS Manifest) that is needed to install updates is corrupt. To correct this problem, you will need to repairWindows. RepairingWindows will not damage your personal files or the programs that are installed on your computer.

  The System Update Readiness Tool for Windows can correct some conditions that causeWindows Update error 80070490. You can access and run this tool by reading this http://support.microsoft.com/kb/947821 on the Microsoft Web site.

  If the system update readiness tool solves the problem, you need to repairWindows. RepairingWindows will not damage your personal files or the programs that are installed on your computer.

  Once you have completed the repair, you will need to restart Windows Update to install updates are not included on the installation DVD. RepairWindows, follow these steps:

  1. Close all programs and restart your computer.

  2. Insert the DVD into your disc drive. Wait for the installer to start. If the installation program does not start automatically, follow these steps:

     1. Click on start and type Drive: \setup.exe in the search box. ReplaceDrive with the letter of the DVD drive of your computer (for example, D:\setup.exe).

     2. List programs, click Setup.exe.

  3. Click on install now.

  4. Click go online to get the latest updates for installation (recommended).

  5. If you are prompted to do this, type the Windows product key.

  6. What type of installation you want? window, click upgrade.

  7. Once the installation is complete, restart your computer, and then run Windows Update.

  If this post can help solve your problem, please click the 'Mark as answer"If you find it useful, mark it as useful by clicking the 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Custom Quiz with master Widget are not related to the LMS (Captivate 5.5)

  Hello

  I wrote a quiz with partial credit and, in order to make answers, I use the master Widget. (A big thanks to Lilybiri and Infosemantics for all the advice I found in blogs and learning classes!)

  In summary, the quiz is composed of 2 questions with 4 possible answers.  Each of the 4 answers have a different score attached to it (i.e. to answer a = 4 points; Answer b = 3 points answer c = 2 points; Answer d = 1 point).   On each slide of the question, I have added a Master Widget (using the variable representative points the student received as a slave).  I want the quiz to report the score for each question.   After the student has answered these two question slides, they continue to a slide 'results '.  Here, they consider the total of their scores and get your comments on if their total is high, too low or online.  On the results page, I used the master Widget itself to make the quiz on the total score.

  I downloaded this quiz as a package SCORM 2.3 Moodle and Blackboard 9 (we are different systems LMS to test).  The short quiz in each LMS, but when I try to access a report, I get no results: no report received for each item quiz and no total score points.  Indeed, in the table, I get a blank page:

  

  In Moodle, I get:

  

  Here's what to look like my quiz preferences:

  

  I'm really stuck.  I realized there are many components to this process and I really need help to find out where the problem lies.

  Thank you for your time and help!

  Bray,

  Yes the numbers on the slide of questionnaire results are important because they indicate that some of your widgets or other interactive objects are not reported to the "official" quiz score

  You must go back and check the objects you want to appear in the score.  The score of 67% reported by the quiz on the quiz results slide probably means that Captivate think you have only three objects within the quiz and only two of these (two-thirds or 67% in round numbers).

  You mentioned before that you have three Master widgets in this project.  How many of them can be found in the report for the quiz?  To check if they are all considered to be successes, turn on Success and Failure subtitles for these widgets, and then run through your interaction.

  When you use a Slave to Variables with the master of widgets for partial credit, remember that even if the captain widgets can account for these variables as being interactive objects, Captivate does not work.

  Although the captain widget is VERY powerful, it also tends to mess with minds, because there are SO many ways you can configure. If you use partial credit, check if you have the option to bypass the assigned score own widgets with the total score of points from the slave value objects.  If you use this option, you must ensure that at no time can the substituted score not fall within the range 0-100% compatible SCORM LMS will accept.

• Windows Update does not open in Mode safe while trying to install updates that are not installed in the usual way

  My computer will not install the important updates Service Pack. Support.Microsoft recommend safe, but in view Mode Setup without failure, you can not open the program update of Windows (from all programs). If I left click or right click and open nothing happens except that I immediately back to the Safe Mode screen.

  Hello

  • What is the antivirus installed on the computer program?
  • You receive an error message?

  I want to say that windows update does not work in safe mode.

  I suggest you follow the below methods that can help you solve your problem.

  Method 1: You can download Service pack 1 in normal mode and install in safe mode.

   

  Method 2: If above does not work, follow the procedure below:
  Step 1:

  I suggest you to disable any program of security on your computer and check if it solves the problem.

  After reviewing the question you must reactivate the security on your computer program.

   

  Note: Run the computer without antivirus software or firewall is a potential threat to the computer; Be sure to activate security software after completing the troubleshooting steps and after identifying the problem.

   

  Step 2:

  I suggest that you put your computer in a clean boot, try to install service pack 1 and control.

  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:
   
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135 
   
  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Reference:

  Learn how to install Windows 7 Service Pack 1 (SP1)
  http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

   

  See also:

  http://support.Microsoft.com/kb/2505743

• Of the project are not related to the LMS, I should update file .au?

  I have LearnerWeb LMS System. I always published Lectora files. I downloaded a Captivate 8 (AICC) project and it is not from the LMS, although its placement in in Captivate... Any ideas how or what I can do?

  Is ACEC who supports LearnerWeb?

  I investigate LearnerWeb forums, and see if someone has posted recommended to publish settings for Captivate.

  For our LMS, we use SCORM course developed in-house and AICC is used only for externally hosted material as is tracking options are limited. (Once again, to our LMS. YMMV!)

  Also, there are parameters in the Cp of features publication that could conflict with the SCORM / AICC settings, if you want to get detailed advice, it is best to publish a screenshot of activate (Quiz / Reporting) and the Configuration screens.

  
  

  Activation of the report:

  

  Configure:

  
  

  
  

• Apex are not related to the user of the application of the law

  I use Apex 4.0
  
  In one of my pages, it handles inserting or updating data according to a point page value - it updates or inserts.
  
  The user made its appearance in the production as "ANONYMOUS".
  When like dev appeared as "APEX_PUBLIC_USER".
  
  So far in the update, insertion, I tried
  
  Author =: App_user
  
  Author = NVL (V ('APP_USER'), User)
  
  and also author = (select v ('APP_USER') of double)
  
  Seriously, I'm lost in this issue. Google has not resulted in anything useful either.
  
  Any help would be greatly appreciated.
  Thank you

  And:
  you have a trigger on the table that defines the column author too?

• Two days ago, I downloaded Adobe Acrobat update for mac desktop. It is registered with Adobe and watch on my account, such as registered. I try to open and get the error message "you are not connected to the internet or your clock is wrong" are all two in

  Two days ago, I downloaded Adobe Acrobat update for mac desktop. It is registered with Adobe and watch on my account, such as registered. I try to open and get the error message "you are not connected to the internet or your clock is wrong" are all two inaccurate statements. I GET NOTHING BUT NOTHING ADOBE 'SUPPORT '.  How can I get just the program open and running?

  Check your hosts file.

  help for that and other adobe.com sure common connection problems read, http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

• KB2183416 Windows Update for IE8 repeatedly fails with the error code "WindowsUpdate_8007371C" "WindowsUpdate_dt000"

  KB2183416 Windows Update for IE8 repeatedly fails with the error code "WindowsUpdate_8007371C" "WindowsUpdate_dt000"

  Whenever I run this update, it seems that it installs about 90% of the way but then stops and breaks down about 20 seconds later.  If someone else sees this problem and is at - it a solution?  I'm running Vista Home Premium SP2 and KB2183461 is listed as a critical update for my system.  Help?

  Preliminary stage: If the Tea Timer of Spybot is enabled, please disabled until we finished this thread. Seehttp://aumha.net/viewtopic.php?f=26&t=32409

  Tip: If you don't fully understand what Tea Timer does and how it does, leave it disabled permanently.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  McAfee applications (and Norton) are known for not not upgrade (or uninstall) "clean". If you have McAfee Security Center installed since you bought the computer, he is been updated (automatically) several times. Try the following:

  1. run this triple McAfee fix: http://service.mcafee.com/FAQDocument.aspx?id=TS100507

  2. after reinstallation of McAfee Security Center to step #3 patch triple, manually & repeatedly updated McAfee Security Center until you get one invite "no updates more".

  3. OPTIONAL: If you have had problems with IE8, open IE8 (only) to http://support.microsoft.com/kb/923737 & run the difficulty.

  4. OPTIONAL STEP: Open IE8 (only) to http://support.microsoft.com/kb/971058 & run the difficulty by DEFAULT inside and modes and AGGRESSIVE. [1]

  5 restart and test by launching a manual check of updates & see if KB2183461 now installs. See...

  How will I know if my computer is up to date?
  http://Windows.Microsoft.com/en-us/Windows-Vista/how-can-I-tell-if-my-computer-is-up-to-date

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list the updates installed in Add/Remove Programs (Windows XP) or updates installed (Vista & Win7).

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I can not install the "Security Update for Microsoft Silverlight (KB2636927) ' get the error code"656»»"

  I can not install the "Security Update for Microsoft Silverlight (KB2636927) ' get the error code"656»»"

  I would like to reinstall the version the most recent, but before to do that click on the "fixit for me" button on the bottom of the page to

  http://support.Microsoft.com/kb/2608523

  Latest version

  http://www.Microsoft.com/getSilverlight/get-started/install/default.aspx

• Several windows updates are not installed and the error code given is 66A

  Original title: updates

  Several windows updates are not installed and the error code given is 66. However the error is considered to be unknown and the code is not useful to find a solution. Anyone know what the code means, or we mean?

  Hello

  1 did you change on your computer before this problem?

  Follow the suggestions and check if it works.

  Method 1

  You can reset Windows Update components and see if it works fine.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058
  Method 2

  You can download and run the system update readiness tool.

  Description of the update tool of the system to Windows Vista, Windows Server 2008, Windows Server 2008 R2
  http://support.Microsoft.com/kb/947821

  See also:

  Error code '0x8007066A' or "66" when you use the Windows Update Web site or Microsoft Update to install the .net Framework update

  http://support.Microsoft.com/kb/2507641/en-us

• Im getting 800737 error whille B install SP1 update for my windows 7 Home Basic 64-bit machine

  Im getting 800737 error whille B install SP1 update for my windows 7 Home Basic 64-bit machine. During the first installation, it has installed successfully. Later, I did a system restore to restore other software and I lost this update in this action. Then again tried to download the update system update, but the above error.

  Then tried to download the update from the microsoft Web site and install it using the standalone installer. I get the error SXS_TRANSACTION_Closed. I ran all kind of convenience store and disabled antivirus and erased all updates previous system and tried again from the first. I still get this error. Even the microsoft team is not able to support me. They want to do a re installation of windows. Is there any solution to fixing without format and reinstall. ??

  I hope this will help you

  http://www.techsupportall.com/how-to-fix-Windows-Update-error-80073701/

• Installed all updates from MS, but the history update are not available in the MS Update screen.

  When Windows Update is run on my PC, the entry 'Review your update history' in the display of Windows Update is inactive, i.e., it cannot be activated to display the updates installed. All updates via the last previously downloaded and installed, with no error reported during installation, according to C:\Windows\WindowsUpdate.log.

  What it takes to turn the update history?

  Hello
   
  Let us, perform the steps below and check if everything works well under Windows Update history.
   
  Method 1. Reset Windows Update components.
  I would ask you to reset the Windows Update components and check if we get the history of Windows Update works again.
  Here's how:
  1. Click Start and type cmd in the box start the search.
  Right click on cmd in the list programs, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type your password or click on continue.
  2. at the command prompt, the following line, and then press ENTER after each:
  net stop wuauserv
  net stop bits
  net stop cryptsvc
  Ren %systemroot%\System32\Catroot2 Catroot2.old
  net start cryptsvc
  Ren %systemroot%\SoftwareDistribution SoftwareDistribution.old
  regsvr32 c:\windows\system32\wuapi.dll
  regsvr32 c:\windows\system32\wuaueng.dll
  regsvr32 c:\windows\system32\wucltux.dll
  regsvr32 wups2.dll
  regsvr32 c:\windows\system32\wups.dll
  regsvr32 c:\windows\system32\wuwebv.dll
  net start bits
  net start wuauserv
  net start Eventlog
  3 output
  4 restart the computer.
  For more information, see the article below:
  http://support.Microsoft.com/kb/971058
   
  Method 2.
  If the error still persists please provide us with the error log:
  Type eventvwr.msc/s in the address bar.
  The list of all the events that are listed as 'Error' in the main window when you go to 'Newspapers Windows' and 'Application '. There is often a large number of them. Send us any ones you see listed for the last few days. (Please also do it for the log files in 'System'). When you do, provide us the name of the 'Source' and all that is listed in the description below the list of newspapers box when you click on one.
   
  Method 3.
  I would also recommend to install the Windows Update Agent to manage the updates on your computer.
  Download and install the Windows Update Agent to manage updates for your computer.
  Follow the link below to download and install Windows Update Agent:
  http://support.Microsoft.com/kb/949104
  
  Please let us know if this helps you resolve the problem or if assistance is needed.
  
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• my updates are not proceed with the installation even if it is powered. I've had a wndows XP SP2

  my updates are not proceed with the installation even if it is powered. I've had a wndows XP SP2

  my updates are not proceed with the installation even if it is powered. I've had a wndows XP SP2

  If you mean that Windows updates are not proceed with the installation, it is because the support of Windows XP Service Pack 2 ended on July 13, 2010, so no updates were available for this purpose since then.

  http://Windows.Microsoft.com/en-us/Windows/help/end-support

  To resolve this problem, you MUST upgrade to Windows XP Service Pack 3, which is covered and a link procided further to the bottom of the page at the link above.

  Rob

• Error: "Setup cannot continue because you are not connected to the internet or the server is unavailable" with install LifeCam

  Original title: Microsoft LifeCam VX-3000 installation problems

  On the insertion of the CD, I get an error message that says:

  "Setup cannot continue because you are not connected to the internet or the server is unavailable.  Connect you to the internet and run the SETUP again.  During the installation process, accept all safety messages or a firewall. »

  I am connected to the internet and have tried the setup.exe and allowing the CD auto load with the same error several times running.    (Windows xp / laptop Toshiba - all system bus met...)     Thanks for any help!

  Hi kb11a,

  The Knowledge Base article has many resolutions for this issue. Follow the steps. I hope that one of them will fix the problem of the installation.

  Resolve the error "Setup cannot continue" when you install the LifeCam software
  http://support.Microsoft.com/kb/973297

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• BlackBerry Smartphones Facebook updates are not displayed in the Facebook BB app

  Hello! I installed a new version of the Facebook app for BB (2.0). Everything is going well except for the fact that some updates are not reflected in the Facebook of BB application. I get normally new RSS and messages, but I don't see it as "xxx was marked in picture xxx" or 'xxx and yyy are friends now. " Is it supposed to be like this? Or something is wrong?

  Information that you reference was never available in the facebook for blackberry app, same 1.9. However, you can only view the mobile site by pressing Menu in the application, then select "Go to the Mobile Site" it of your perception of information, hope that answers.