startup problem: how to fix the optical drive?

Similar Questions

• Satellite M30 Pro: How to change the optical drive?

  Hello
  could someone please give me a hand on change/replace the optical drive on my Satellite Pro M30?

  Alas, my drive is a DVD-ROM/CD-RW. I have another with the functionality of DVD burning (burner Super Multi of Matsu * a). I wonder how I could replace, because it is not possible to easily slide the bones?

  Thank you.
  Jan

  Hello

  To remove the optical drive, he can just remove the 2 screws that are placed at the bottom of the unit on the side of the road. Then you can simply drag the drive outward to disconnect the connector on the system board.
  The player is placed in the plastic frame. You must therefore also this framework for a new disk.
  Remove the plastic of the unit frame, only to remove 4 screws.

  Good bye

• How to remove the optical drive

  I have a dv7 - 4083cl.  The BD drive recently stop working and I need to replace it.  I found a thread further on which linked to a video demonstration of the removal of the disc on a Dell computer, but my problem is that there is no screws holding on the back plate of my model and for the life of me I can't find any detention buttons/clips out the disc.

  What Miss me?

  http://h20574.www2.HP.com/results.htm?SID=4149935&MEID=B5EE0DDC-491a-401B-820D-20283A75E1F1

  You may need to register again to use the library and give him 30 seconds to load. Navigate to the optical drive in the left column.

  The video shows the cover of the hard drive must be removed first to access the screw now the optical drive in place. Once the screw is removed, it takes just.

• How to replace the optical drive on the Tecra R940

  Hi all.
  I search everywhere trying to see how to replace the ODD (optical disc drive) of a laptop Toshiba Tecra R940? pt439a-00n003
  its supposed to be easy, but can't get out.

  Anyone know where I can get some info on how to make the?

  Thanks for reading!

  I think that there are just one or two screws holding it on the basic coverage, it then behind the scenes.

• Satellite Pro A10 - how to remove the optical drive?

  Can anyone give me some advice here please. I am trying to remove the DVD drive existing my A10. I removed the screws of restraint, but the Player cannot slide out. I checked for other screws but have found nothing.
  Any help or advice would be greatly appreciated.

  Hello

  As far that know that a single screw fix the drive.
  Turn the face of the computer down and remove the two screws fixing the CD-ROM
  Drive.
  Turn on the computer to face and open the display. Press towards the Group of CD-ROM drive and disconnect all of CD-ROM drive in the PJ1800 on the system board. Remove the two screws which support CD-ROM of the entire disc CD-ROM. Remove fixing two screws fixing the support side and remove the lateral support.

  All that s

• How to change the optical drive for Portege R500-135

  Hello

  I need to change my optical drive, but I don't kown where I can buy one.
  My laptop is PPR50E-08M046FR.

  THX

  Rgds

  Hello

  As far as I know it of not easy to replace the STRANGE because it s hidden under the bottom cover, this cover should be removed first to access the CD/DVD drive, HARD drive, etc.
  But I found a useful page:
  [Portege R500 | http://www.irisvista.com/tech/laptops/Toshiba-Portege-R500/disassemble-laptop-remove-hard-drive.htm]

  But note; everything you do it your own risk you Lady laptop parts. Be always careful and don t use force

• REPLACE THE OPTICAL DRIVE SSD DRIVE

  Hello good hope of any good body today, I have question please, I want to spend my new laptop alienware 14 replace my scanner new SSD drive, so anyone can help or have any links to help step by step, in any case thank you for all for listening to wish you all good day, KMB

  Hello Kmbforever!

  Here is a video that will show you how to disassemble the optical driver, and if you want to add the secondary hard drive so you will need the support that he holds.

  You can contact Dell sales department in your country to see if they have it in stock.

• How to remove the disc from the optical drive

  Had to change hard drive on MacBook Pro - had tried to use Drive Genius to fix an old - not good - now have a new HD in there with no OS - now have a disc in the drive I can not eject so I can load OSX of a disc and eith no OS can not download oe ElCapitan Yosemite. How can I get this drive?

  It doesn't have an operating system to work, just the firmware. If he tries always to start (for example, the startup chime), turn the power off, press and hold the trackpad in the down position, then press the power switch. That force - eject anything in the optical drive.

• Qosmio G50 - 10J: how to replace the optical disc drive (ODD)?

  Hello

  the optical drive of my Qosmio G 50 does not work properly, it reads only some movie-DVD, but unfortunately not videogameDVDs at all, so I can't install any games.
  The guarantee is also outdated. So I wanted to ask if it is possible to change the disk myself, if it is then how I had to do and if by the laptop would be in
  risk to get damaged?

  I would be very grateful for each tip and all the help guys can give me!

  Best regards
  a.z.

  Hello

  In various cases the ODD replacement is very delicate.

  If you wish, you can consult this forum category.
  Here you will find some videos how to replace the ODD on the different laptop models:
  http://forums.computers.Toshiba-Europe.com/Forums/Forum.jspa?forumid=115

  This is also a nice Youtube Channel which provides the instructions how to replace the ODD:
  http://www.YouTube.com/user/toshibaeuropesupport

  But the ODD laser lens may be dirty. In my case I could solve similar problem, cleaning the lens of the laser by using a cotton ball and alcohol tip.
  But make sure that this!

• Satellite Pro L20 - How can I change the optical drive?

  I want to change the optical drive in a satellite pro L20 but I'm having trouble finding instructions on how to remove it. Can anyone help?

  The CURIOUS reader is fixed with a screw at the bottom of the unit. Then, turn the computer over and remove one screw an optical disk drive.
  The second screw is hidden under the keyboard. That's why this screw must be removed also. And then disconnect you should be able to pull-out of the optical drive.

  But note; If you have no experience of these things, ask a technician for laptop computer to help him.

  Good luck

• How to get around the problem of printing from the printer driver Adobe PDF for Notepad instead of a PDF Document?

  How to get around the problem of printing from the printer driver Adobe PDF for Notepad instead of a PDF Document? I tried the tool 'Repair Acrobat Installation' and other problems listed on the forums, but nothing worked. In the Notepad document is the following ' % [ProductName: distill] % X937B6DD4 not found, using the mail service.» X07BB154E not found, by using the messaging service. % [Page: 1] %% % [Page: 2] % % [Page: 3] % % [Page: 4] % % [Page: 5] % X4EEBB81F not found, by using the messaging service. %% [Error: invalidfont;] OffendingCommand: show; ErrorInfo: CharOffsets ss %% [Flushing: rest of work (end of file) will be ignored] %% %% [warning: PostScript error.] No PDF file produced. ] %%."

  The log file indicates that the Distiller cannot find fonts and besides, fonts with very weird names. (These names can often appear when printing from an application, WPF such as Internet Explorer 9, 10 or 11.)

  My best guess is that the problem is with the options set for the PostScript of PDF from Adobe printer driver instance. Exit the application you were initially impression since. Open the Adobe PDF printer Properties . Then click the Advanced tab. Then click on the button default printing . This should produce a significant window default print Adobe PDF is already opened in the Adobe PDF settings tab. On this tab, there is a checkbox to rely on system only fonts; do not use fonts in the document. If this box is checked, uncheck it and press apply , then OK. Then go to the general tab and press the button Preferences giving the window entitled Adobe PDF printing preferences. Again once, look for the box to rely on system only fonts; do not use document fonts. If this box is checked, uncheck it and press apply , then OK. Then back in the Adobe PDF Properties dialog box main, press apply (if it is enabled), and then click OK. Re-enter the app you were original print and try to print again. Let us know if that fixes the problem.

  -Dov

  PS: Unfortunately, rely on fonts system only turned on by default, causing problems for many applications. I always recommend turning it off (i.e., unchecking it)!

• Problems of updates Windows XP - how to fix the incorrect Windows XP updates KB2633952 keep asking to install?

  Problems of updates Windows XP - how to fix the incorrect Windows XP updates KB2633952 keep asking to install? True, it is that it is already installed on your computer. If hide us, an another previous KB2570791 arises in our updates of Windows and asked to install anything, that it was installed... of the questions repeated and very annoying.  Help, please!

  (Microsoft Answers just sent us message have deleted our previous thread, ask for help!) We are simply not that these problems are problems with Windows XP updates related to DST or not?)

  Nadia. PA supporter said that your computer is hacked. He may be right. I can't weigh because I don't know what led him to this conclusion. If your computer is hijacked, then you should address that more that you need to fix this minor update. However, under the resolution of your problem to update, you can try this:

  Assume Windows XP

  Check the C:\Windows\System32\ directory for the presence of the file tzchange.exe

  If the file is not present or if the version of the file is not 5.1.2600.6171 or newer...

  Download the update appropriate 2633952 for your platform here:

  http://support.Microsoft.com/kb/2633952

  Run with - extract switch (e.g., Start > run > "[path to the downloaded file] \WindowsXP-KB2633952-x86-ENU.exe"-x)

  Of course, replace [path to the downloaded file] with the path to the downloaded file.

  Citations may or may not be required depending on the path. Place the x - out the citations if you use them.

  Choose a location for the extracted files (a new folder is recommended)

  Locate the extracted files. File tzchange.exe you want and copy it into C:\windows\System32

  That rerun Windows Update detection to see if the problem is resolved.

• Is there an easy way to identify the type of disk required by the optical drive in my computer? How to identify DVD + compared to a DVD player?

  At home, my wife and I have two computers four desktop computers and laptops.  I often bring the laptop I got from my employer to use when I travel or work at home. Is there an easy way to identify the type of optical drive required by the optical drive in a computer?  How to identify DVD + compared to a DVD player?  I have never the disk right when I need to burn something.  Thank you.

  http://Windows.Microsoft.com/en-us/Windows-Vista/which-CD-or-DVD-format-should-I-use

  Should which CD or DVD format I use

  The above should help you.

  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD

  General information on CD burning.

  See you soon.

  Mick Murphy - Microsoft partner

• How to fix the problem error Creative Cloud applications download stand by me

  how to fix the problem download error Creative Cloud applications do not leave me

  Hello

  I think that you have found the "download error" in the Apps Panel.

  Please check the help below document:

  Download error in the applications tab of Creative Cloud Desktop Application

  You can also view the threads below:

  https://forums.Adobe.com/thread/1832357

  Persistent Cloud error - error download - creative

  Re: Creative Cloud "Download error" message

  Kind regards

  Sheena

• Re: DVD of the (optical) drive cannot read a disc when inserted.

  Hello everyone.

  MY DVD drive can not read a disc when inserted.

  When I check the Device Manager, it has the following against the optical drive error message:

  "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) »

  How can I solve this problem and fix it for free if possible? Download a patch from the website of toshiba?

  Your help is greatly appreciated.

  Mark

  See also http://support.microsoft.com/kb/314060/en-us and post comments.