StarWind and EqualLogic coexisting

Similar Questions

• Can forms 6i, 10g and 11g coexist in the same windows box?

  Hi all.
  
  Is there besides using different ORACLE_HOMEs, any consideration to take into account to install 11 g and to coexist with 6i and 10 g?
  
  I just do a 11g installation, and in addition to having failed, he also do my 6i installation unusable.
  
  Your comments will be greatly appreciated.
  
  Best regards, Luis...!

  Yes, all three can co-exist on the same Windows box. I currently have Oracle Froms 6i and 10g R2 or 11g R2 installed on the same workstation. The builders of form work well, however if you plan to run a form from the forms Builder, you will have conflicts between the (Forms 10 g) OC4J and WebLogic (form 11 g) server. I was able to work around these conflicts by changing the system path and make sure that the inputs of 10g of forms appear before 11g entries when I need to run a form from the Forms Builder 10 g. Conversely, to ensure that 11g entries appear before 10g entries during execution of a form of the 11 g Forms Builder.

  I saw a thread where someone said that they were able to work without having to modify the system path, but I was unable to find this thread again to test their solution. You can search this thread if you do not want to change the system path every time.

  Forms 6i come into conflict because it uses the forms instead of an application server Runtime to run a form from the forms constructor.

  I hope this helps.
  Craig...

  Published by: Silvere on 7 February 2013 13:12

• Office 2003 and 2007 coexist in vista, but updates for 2003 do not settle

  I am running Vista family (64-bit) and have the two 2003Pro Office 2007 Pro and installed. Windows Update tries to install 4 updates to Office 2003 including service pack 3 but install still fails without an error code. Someone also told me that they don't think that Office 2003 and 2007 can coexist on my installation, is it true? I have not installed Outlook 2003 and 2007. I installed Word, Access, excel & Power point.

  Hello RICKYR,

  Thank you for visiting the website of Microsoft Windows Vista Community. The question you have posted is related to Microsoft Office, and would be better suited to the Microsoft Office community. Please visit the link below to find a community that will provide the support you want.

  http://www.Microsoft.com/Office/Community/en-us/default.mspx thank you for using answers Forum. Please let us know how it works.

  Joseph
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Linux KVM and EqualLogic

  Hello

  I was wondering if someone could help me with a problem with KVM and ISCSI.
  If we're going to restart a controller on our EqualLogic SAN or there is no disruption to network on the storage network (for example, a member of the pool move us)
  KVM you can throw a wobbler and go of their filesystems read-only (guest centos 5.9 with virtio pilot).
  I have read a few forums that indicate you can set values for timeout to drive on the clients themselves, but this is not possible using the virtio driver, which is what we currently use.
  Is it possible that we can load KVM to suspend the virtual machine, if there is a failure of storage and take back them when the store comes back online (I think that vmware for it)?
  We are running Centos 6.4. There seems to be a werror = 'stop' and the rerror = 'stop' options to achieve this, but if I try to put these options in the XML of libvirt for a VM, libvirt seems to be to remove.
  Thank you

  This was solved by using/dev/eql to the disk instead of ISCSI and dev/disk/by-path path (using virt - manager)

• DCB - Force10 MXL and Equallogic PS6210 - worth it or not?

  Hello all

  I have a new 3-blade M620 virtualization environment, 2 x MXL Force10 switches and 2 x Equallogic PS6210 - there is the possibility of using DCB - is it useful to configure DCB, will I get the gains and better stability, or for a small environment should I just use the configuration standard iscsi?

  Ideas or alternative options gratefully received.

  Thank you

  Hello

  If the switches are dedicated for iSCSI use, then there is no advantage to the use of DCB.  DCB in itself does not have iSCSI faster.  I just made sure non-iSCSI traffic doesn't interfere by providing iSCSI with a higher priority.  All other traffic is going in a "lossy" class of service.

  Also, you will need DCB converged network adapters to use BCD on the hosts.  Most of the iSCSI software adapters do not support DCB.

  Kind regards

• S Q on putting in place new infrastructure to ESX and equallogic SAN

  Hi all

  I have installed recently 3 new servers ESX v4 and an equallogic ps4000x SAN. These are connected by 2 powerconnect switches dell 4524. If you want to criticize my configuration, I added attachments, detailing the layout. I would be interested if someone comments on my installation.

  In any case, I'm at the point where I can start server virtualization. What I'm not sure is the best way of ESX/VM configuration to take advantage of Equallogic's snapshot technology. We are likely to buy symantec backupexec agent in the future, so it makes sense to set them up properly now.

  I can't seem to find documents on how to set up so I was wondering if anyone had any suggestions? I will virtualize exchange and SQL servers among others.

  I anyone has suggestions or point me in the right direction, I would be very grateful.

  See you soon,.

  Huwy

  We use the last VE ASM, it is smooth, more schedule flexibility than the GUI EQL.  I've done some restorations to test virtual machines and data warehouses of data, on themselves, other stores etc., ASM has worked well.  The previous version looked a little awkward, but 2.0 allows you to selectively restore individual VMs, rather than an entire data store, so a great step forward in the old version.

  Please let us know the BackupExec works, we seek also to who.

• RS 4 and Equallogic SRA

  So, confused about the ASR for the Equallogic.  On the VMware website, it lists a DSM for Equallogic be used with 4 SRM.  But, the SRA is the old 1.0.1 version which has been used with 1 SRM.  Dell does not list an ASR on their site.  When I talk to Dell, they say they have not released a SRA yet, that there is a bug with RS 4 and they are waiting to be fixed.  Is - anyone tried the SRA with SRM 4 1.0.1 then it works?  Thank you

  -Craig

  You can use SRA 1.01 with SRM 4.0

  The current installation of SRA requires the installer to run in compatibility mode (for my installation vcenter on windows 2008)

• Can MD1000 and MD1200 coexist nicely on a PERC6e?

  Hi, I have a PE2950 with windows 2008r2 with a PERC6/e controller with two external ports.  One of the ports is attached to a MD1000 disk array.  I need more storage and I'm looking to get a MD1200.  Can I attach the external port on the PERC6e one Bay MD1200 discs?  Suggestions?

  Thank you!

  -sul.

  Sul26,

  Unfortunately, you wouldn't be able to put the two of those paintings on a Perc 6 controller. The reason is that the MD1200 is a SAS 6 GB table and the MD1000 is an array of 3 GB and the connectors are completely different. You need a Perc H800 controller for the MD1200.

  Please let me know if you have any other questions.

• Can you independent and towers coexist?

  I have a 2.4 roaming wireless network which consists of 4 independent 1242 APs. I need to expand the coverage area.

  Can I add a controller and towers with the same SSID and wait my customers wandering from autonomous AP for the TOUR?

  Or I have to replace the 1242 s 4 in tours?

  Thank you

  The code you need is here:

  C1240-rcvk9w8 - tar.124 - 25e.JAO3.tar

  http://software.Cisco.com/download/release.html?mdfid=280237322&flowid=7...

  To convert the AP, here are some links to guide you:

  By using a TFTP server to revert to a previous version

  http://www.Cisco.com/en/us/docs/wireless/access_point/conversion/LWAPP/u...

  https://supportforums.Cisco.com/docs/doc-18268

  http://www.Cisco.com/en/us/docs/wireless/access_point/conversion/LWAPP/u...

  http://www.YouTube.com/watch?v=QQ_NuxdRhQ4

  https://supportforums.Cisco.com/docs/doc-14960

  Sent by Cisco Support technique iPhone App

• Cisco Anyconnect VPN and IPSEC coexist on ASA 5520?

  Can a Cisco ASA 5520 which has been configured as IPSEC VPN gateway and also be configured as a gateway ANYCONNECT VPN and vpn IPSEC service anyconnect vpn clients clients maintenance at the same time? Any negative impact on the performance or any other problem that everyone knows?

  I guess that by 2 connection limit, you are referring to the 2 licenses for anyconnect?  You should consider using the anyconnect essentials license, which is relatively cheap (100-200 dollars I think) and will take you to the edge of the platform with anyocnnect.

  You shouldn't have any problem using IPSEC with LDAP client.  It is quite common - my company is IPSEC as Anyconnect off the coast of the same interface using authentication ldap (even same-group policy) for the two.

  -Jason

• Conflict of Bluetooth and WiDi: Intel Dual Band Wireless-AC 3160

  I have a HP Envy 17 laptop t-j100 with 4th generation CPU i7-4700mq as well as the NIC Intel Dual Band Wireless-AC 3160.  The Wifi and Bluetooth worked well. However, Bluetooth has stopped working and has disappeared from the list of devices in Device Manager after you install Intel WiDi software.

  Can Bluetooth and WiDi coexist on this map of 3160 AC? If so, how to make two of them work?

  I appreciate your kind help.

  Hello gyshen, welcome to the Forums of HP.

  I see that you have a problem with the Bluetooth works on your laptop after installing software WiDi. I will try to help you with this.

  What do you mean, by installing software WiDi? Where have you installed this from?

  Deepen the question for you and to answer your questions, both can "coexist" using the map Intel AC 3160. This is confirmed here: Intel® Dual Band Wireless-AC 3160.

  The processor is also supported: Intel® Core™ processor i7-4700MQ.

  I suggest try to update/install the two drivers (without wireless/bluetooth). They are here:
  Driver LAN wireless Intel 7260/3160
  Driver Bluetooth 4.0 Intel

  I'll also give you this document: Using Intel Wireless Display (WiDi) of media to your TV display as it can be useful to you.

  These are the most recent provided by HP to your laptop.

  Let me know if those who help at all, please post on the Forums of HP.

• Change the IP and subnet

  Hi, I wanted advice on the change of the ip address and the subnet.

  I have a band with 3 equallogics, currently the Group ip and individual ip addresses are in the same subnet as the main network (well separated on different switches). The management ports are not enabled. (Don't ask, it's just like that!)

  What I want to do is change all the iscsi ports to another subnet, select the management on the original subnet ports.

  How better to do this without downtime (if possible)?

  Do the following

  1. replace the new subnet 1 NIC on each server

  2. change eth1 on each equallogic new subnet

  3. change the Group on the new subnet IP

  4 connect target iscsi initiator on the servers to the new IP address

  5 change the rest of the NIC on the servers and equallogic to new subnet

  6. turn on management NIC on old subnet

  Hello

  Also are the servers on the switches 'SCSI '?

  I do not have this being done without a failure.  You will need to disconnect all connections to the server, enter the new address connection and re of the discovery.  If you have both at the same time, you will eventually "double Assembly" volumes.  That would likely result in corruption when you you disconnected the old connections.

  Otherwise, your plan is mostly correct.

  1.) disconnect all servers

  2.) change a port on each Member of the new subnet.

  (3.) the IP address of the group change

  4.) changes the IP address remains addressed both.  Make an interface on one, then another.

  (5.) assuming that you will isolate the switches, remove the connection inter between them.

  6.) connect the Mgmt ports to the LAN switch and activate Mgmt dedicated to all members

  7.) Ping test all interfaces on the servers.

  8.) remove old discovery address and preferred for windows targets. (The static mappings for VMware)

  9.) add new discovery journal volumes and return address in.

  10.) repeat on the remaining servers

  Kind regards

  Don

• EqualLogic PS4110X flow control problem

  I configured two Powerconnect 8024F switches for use with Equallogic. The firmware version on is 5.0.0.4 and Equallogic firmware 6.0.1 version. I have one on the other's and I use 6 ports on each switch for this. I configured the ports for use with servers accessing the equallogic and equallogic. I created VLANS separated, the size of the mtu 9216 set and enable flow control. Here's the problem: I got an error, or should I say warning on Equallogic saying only: Ethernet flow control has been disabled on one or more interfaces. I checked severeal times configuration but could not find any problems.

  Any suggestion what could be the problem?

  Thank you very much for the help!

  Rafko

  Data Center Bridging is enabled.  DCB is not entirely supported by 8024F switches.   This causes flowcontrol standard port must be disabled.  Disable DCB is in the EQL GUI interface, under group settings.

  This will solve the problem.

• Based on the list of components with drag-/ dropEnabled = true can not coexist with other moveable components

  Hello Flexers,

  because I find it a bit difficult to describe the problem I will try that after posting the code and a screenshot:

  
  <s:Application
       xmlns:fx="http://ns.adobe.com/mxml/2009"
       xmlns:s="library://ns.adobe.com/flex/spark"
       xmlns:mx="library://ns.adobe.com/flex/mx"
       width="100%" height="100%">
       
       <s:layout><s:HorizontalLayout/></s:layout>
       
       <fx:Script>
            <![CDATA[
                 import mx.core.IUIComponent;
                 import mx.core.IVisualElement;
                 import mx.events.DragEvent;
                 import mx.managers.DragManager;
                 
                 protected function draggableLabel_mouseDownHandler(event:MouseEvent):void {
                      DragManager.doDrag(event.currentTarget as IUIComponent,null,event);
                 }
                 
                 protected function leftGroup_dragEnterHandler(event:DragEvent):void {
                      DragManager.acceptDragDrop(event.currentTarget as IUIComponent);
                 }
                 
                 
                 protected function leftGroup_dragDropHandler(event:DragEvent):void {
                      leftGroup.addElement(event.dragInitiator as IVisualElement);
                 }
                 
            ]]>
       </fx:Script>
       
       
       <s:List id="leftList"
            dragEnabled="true"
            dropEnabled="true"
            width="200" height="200">
            <s:ArrayCollection>
                 <fx:String>Item 1</fx:String>
                 <fx:String>Item 2</fx:String>
                 <fx:String>Item 3</fx:String>
            </s:ArrayCollection>
       </s:List>
       
       <s:List id="rightList"
            dragEnabled="true"
            dropEnabled="true"
            width="200" height="200">
            <s:ArrayCollection>
                 <fx:String>Item 4</fx:String>
                 <fx:String>Item 5</fx:String>
                 <fx:String>Item 6</fx:String>
            </s:ArrayCollection>
       </s:List>
       
       <s:Group id="leftGroup"
            dragEnter="leftGroup_dragEnterHandler(event)"
            dragDrop="leftGroup_dragDropHandler(event)"
            width="200" height="200">
  
            <s:Rect left="0" right="0" bottom="0" top="0">
                 <s:fill><s:SolidColor color="0x00FF00"/></s:fill>
            </s:Rect>
  
       </s:Group>
       
       <s:Group id="rightGroup"
            width="200" height="200">
  
            <s:Rect left="0" right="0" bottom="0" top="0">
                 <s:fill><s:SolidColor color="0xFF0000"/></s:fill>
            </s:Rect>
  
            <s:Label text="DRAG ME"
                           color="0x000000"
                           mouseDown="draggableLabel_mouseDownHandler(event)"
                           y="0"/>
            <s:Label text="DRAG ME"
                           color="0x000000"
                           mouseDown="draggableLabel_mouseDownHandler(event)"
                           y="40"/>
  
            <s:Label text="DRAG ME"
                           color="0x000000"
                           mouseDown="draggableLabel_mouseDownHandler(event)"
                           y="80"/>
  
          </s:Group>
       
  </s:Application>
  
  

  

  I came across a problem recently. I wanted to be able to use drag - and list controls dropEnabled property and (on the same canvas) use the functionality of drag-and-drop automatic implemented other components (in this case, a combination of movable labels that can drag a group component). I wanted the labels to be moved in the entire screen, but only fall on the part of the Group (NOT the list). The items in the components list were supposed to be interchangeable between the lists in the set of properties dragEnabled and dropEnabled to true. The problem is that when I drag the labels of the groups on the lists a null #1009 object reference error is thrown because the list does not try to calculate the index fall for labels. I know that I could work around the problem by setting dropEnabled = false on the lists and implement drag - move by hand, but I hope that both variants of drag-and-drop coexist in a spirit of flexibility.

  Any thoughts? Thank you very much!

  Kind regards

  Thilo

  When you delete something on a spark list you will need to provide a dragSource not null in the format 'itemsByIndex', if you change your code to something like this, it should work:

  protected function draggableLabel_mouseDownHandler(event:MouseEvent):void {}
                 
  do some data to pass to the list
  var someData:Vector.

• Use of specified space

  Hello

  SAN HQ and EqualLogic Group Manager report only one space left 10% on one of our 6210xs EqualLogic volumes. We have two virtual machines in VMWare with thin disks residing on this volume. No snapshot used or reserved space.

  The vSphere client reports a different amount of space left (a lot more).

  I understand that a block storage device may not be aware of the correct amount of beeing used space on the OS volume. Is this correct?

  If so, I wonder why this feature (use of space show) has been implemented at the forefront in storage management if it does not work reliable at this level?

  Should I disable instead all kinds of reports of volume and warnings to the storage layer and delegate this function to the OS (in my case create respective alarms in vsphere client for the use of space)?

  Thank you very much.

  Best regards

  Martin

  Hello Martin,

  Re: Values EQL GUI.  This is the correct behavior.  By default block storage devices are not informed when a file is deleted.  A deletion is a writing on an allocation table maintained only by the file system of the OS.

  There is a new SCSI command that support more in addition to file systems.  CANCEL THE SCSI MAPPING.  AKA space Reclaim.  When a file is deleted, the host sends the command cancel with the departure of LBA MAPPING and the number of blocks after that for free.  EQL spatial rupture in the pages of 15MB, when an entire page is not assigned, he returned to the free space on a thin provisioned volume.  If the volume is thick put into service just use space will drop.

  Part 2.  When VMware creates a 40 GB VM, even with thick VMDK provisioned, it is not actually write 40 GB.  No where close actually.  She however deduct 40GB of the allocation table in the VMFS data store.

  If you do not use the EQL (async or sync) replication, you can free up space manually using the CLI utility.

  For version 6.0 and ESXi v5.5 here's how to run this utility.

  https://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=2057513

  Kind regards

  Don