Linux KVM and EqualLogic

Similar Questions

• Decided to download Windows 95 for my Linux computer and I restarted and it says: enter the Startup Code!

  Computer fell because I downloaded Windows 95' soft '

  I decided to download Windows 95 for my Linux computer and I restarted and it said: enter the Startup Code!

  Hello
  a startup code? What type of boot disk that you use? Sounds like something from another program.
  Now don't get me wrong, I did not install Win 95 in about ten to twelve years, but I do not remember a start-up code!
  You can do a Bing search on installation of Windows 95 on Lynux for more information.
  Hope this helps,
  B Eddie

• tab KVM and vm is not available in the console kvm the Mmic

  Hi guy,

  Nice day!

  Today, I spend all day looking for the solution to this, but it was a bad day for me. I have access to the server cisco UCS 220 M3 Mmic and when I clicked the button on console kvm on the page group MMIC, the kvm and vm tab does not appear on the console kvm page. When I clicked on the virtual media in the menu, it's only to create image and enable vm media, there is no "Add images" option available for me to download the ISO image of vmware on the server.

  I tried to update the firmware for MMIC and BIOS, but no luck for me. Grateful if someone can help me with that!

  Attached is the retail version MMIC to share with you

  Thank you

  Rabah

  When you click on activate do you see a check mark next to it (see attached screenshot)?

  Try to do a cycle of the power of the box by removing the cables for power for about 3 minutes.

  Have you tried different computers?

• HFM 11.1.2.4 Linux Exalytics and Linux 11.1.1.7/9 ODI

  Hi all

  We have installed HFM 11.1.2.4 on Linux on our Exalytics server, supporting now.

  We have ODI 11.1.1.7 installed on Linux in our work environment and ODI absolutely perfect with our tools such as Essbase. ... And other planning.

  On the Installation and configuration, we found that ODI 11.1.1.7 or 11.1.1.9 on Linux is not supporting HFM Exalytics Linux.Please let us know if there is an ETA for this availability...

  More research, we found that 11 ODI on Windows does not HFM 11.1.2.4 on Linux support and both must be on the same server.

  Then we spent at HFM 11.1.2.4 and 11 ODI on windows and found 11 ODI not supported for HFM 11.1.2.4 which is really confusing... to correct us if this isn't right...

  We cannot have EPMA or FDM in our environment... We have worked on these tools wrt POC and concluded that they do not fit in our needs.

  We have the DRM in place and works effectively with Oracle DB so we use ODI for the mapping between Oracle DB as source and EMP as target also vice versa.

  Please let us know if HFM can be directly connected to the DRM and vice versa for the management of metadata... Thanks in advance.

  I think you should focus on most of the questions to the Oracle espeically if you want an ETA.

  ODI knowledge modules exist for HFM 11.1.2.4 not and will not, if you are looking for integration then maybe look at FDMEE

  See you soon

  John

• StarWind and EqualLogic coexisting

  I was wondering if someone could comment on access to StarWind and EqualLogic provided LUNS simultaneously on the same ESX host.

  The hosts are configured "optimal" for the EQL with two vmks on a vSwitch with two NICs currently.  Put network is also configured for the EQL - flow control to 1 q buffering enabled.

  Any ideas or comments are greatly appreciated.

  Thank you!

  Hello again!

  How are you :)?

  So, you can create separate, vmkernel to be 100% sure that in data security, but everything is going to work on a single vmkernel.

  King looks

  iSCSI Software customer

  http://www.starwindsoftware.com

• With the help of linux deepin and Thunderbird does not pick up time correct system.

  The system time is set correctly for my time zone, but it turns out that no matter what I put the time system; Thunderbird ignores and default time is GMT. I am fully updated both deepin and Thunderbird.

  that shows the TZ environment variable you Linux distro?

• NB100 Linux - problems with Linux update and BIOS

  Toshiba NB100
  Memory 1 GB - Kinston - KTT667D2 / 1 G
  Ubuntu 8.04 - Ubuntu Netbook Remix - CD from Toshiba
  CD-rw/DVD-rw LG GE20 externel USB key
  Keyboard differences

  Hello

  I was very happy to buy my Toshiba netbook.

  First of all, I configured the system ready - to reach the time Ubuntu-desktop, the first and everything was fine. Then I browsed menus and soon found "Aktualisierungsverwaltung" in German - should be 'Updatemanagement' in English - and began. After that I got a slow system, no sound card and later downloaded bios-udate 1.6 does not work too.

  I bought the DVD LG (~75US/~60Eur) burner and restored with the Remix DVD Ubunto system. Who works well and takes about 10 minutes. I bought a Kingston memorymodule too and I've replaced the original one. The Kingston-modul works fine too.

  After that I had read the thread, that work of doesn´t-update BIOS after update Ubuntu I tried again and now I have a good job of BIOS 1.6.

  But I still 2 faullts:

  The ' | '. (vertical bar) is not as shown on the keyboard Fn + X - it is Fn + Alt +.<>

  The 151-update "package" still damage the system - I tried it for 2 times doing nothing but the restoration, of networking, and update.

  The new 1.06 driver sound that I found at Toshiba-Germany and France-Toshiba are dead links (404), the line will help Toshiba now resolve this problem since 2 weeks and don't call back.

  Any ideas?

  Read this link about the update of the bios and Linux updates

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=40156&start=15&TSTART=0

  Try this link for the sound

  https://edge.Launchpad.NET/%7Ejouston-Huang/+archive/PPA/+files/NB100-sound_1.09_lpia.deb

  The keyboard on my link. is Fn + Alt + z. This is for the UK keyboard.
  Have you checked that your keyboard is correct for your country?

  System/preferences/keyboard.

  System/preferences/shortcuts keyboard

  Hope this helps

• Delete the Linux partition and now cannot start PC

  Hiya,

  I had partitioned my HD to a disk of windows xp and linux by car. I deleted the Linnux partition using the application for the removal of a partition in windows. I cannot start my computer now. When I turn on my PC, I get the screen toshiba with all the small icons and then what follows:

  Intel Boot Agent GE v1.2.45
  Copyright (C) 1997-2007. Intel Corporation

  PXE - E61 Media test failure. check the cable
  PXE - M0F: exit Intel Boot agent.
  error: no such partition.
  grub rescue >

  I do not have my recovery as I am overseas at the moment. What can I do? I use a friends pc to write this. The sick PC is a laptop.

  I'm not very computer chip - so if you are kind enough to answer for me, please speak slowly and use easy words ;-)

  Van
  Shaari

  Hello

  You can download the Setup from the Microsoft page of WIindows disk:
  http://support.Microsoft.com/kb/310994/

  Then you could install the Microsoft recovery console that helps you use the commands * Fixmbr and Fixboot * to fix the Boot Manager:
  http://support.Microsoft.com/kb/307654/

  I think this should help other rational use the Live like BartPe or WinPE disc to boot up the laptop.

• Card nvidia, Linux Mint and W520?

  I'm on a W520 possessing a videocard of nvidia Quadro 1000 m, running Linux Mint 17 xfce (64-bit)

  Recentley, I came across a situation that required OpenGL 3.3. Best I can tell, my card intel integrated can support above 3.1!

  So I went to try to get the nvidia card work. Note to all the world at this point... Installation of the nvidia proprietary drivers directley Apparentley is the worst thing to do.

  I went to install the drivers of bumblbee (https://wiki.ubuntu.com/Bumblebee) and have since been frusterated with an nvidia card not working.

  I went to the cat bourdon, scourd the web for my problem, tried to re - install on a fresh USB... Nothing works.

  Has ANYONE else been in this situation? What are the steps that you took to get a functional nvidia card?

  Heres a dump of information from my problems. Basically, running glxgears optirun does not work.

  $ uname - a
  
  3.13.0 - 24-generic Linux sean-ThinkPad-W520 #47 - Ubuntu SMP Fri may 2-23:30 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux
  
  ----
  $ optirun - vvv glxgears
  
  Reading file [DEBUG] [15874.859557]: /etc/bumblebee/bumblebee.conf
  
  [15874.860504] [INFO] configured driver: nvidia
  
  [15874.861018] [DEBUG] optirun version 3.2.1 from...
  
  [15874.861098] Setup Active [DEBUG]:
  
  Configuration file [15874.861134] [DEBUG] bumblebeed: /etc/bumblebee/bumblebee.conf
  
  [15874.861172] X [DEBUG] display: 8
  
  [15874.861207] [DEBUG] LD_LIBRARY_PATH: / usr/lib/nvidia-304: / usr/lib32/nvidia-304
  
  [15874.861245] Socket [DEBUG] path: /var/run/bumblebee.socket
  
  [15874.861281] [DEBUG] Accel/display Bridge: virtualgl
  
  [15874.861318] [DEBUG] VGL Compression: proxy
  
  [15874.861353] [DEBUG] VGLrun additional options:
  
  The LD of Primus [DEBUG] [15874.861389] path: / usr/lib/x86_64-linux-gnu/primus: / usr/lib/i386-linux-gnu/primus
  
  [15874.898691] [INFO] response: No - error: [XORG] (EE) NVIDIA (0): failed to initialize the NVIDIA GPU to PCI:1:0:0.  Please
  [15874.898733] [ERROR] can't access secondary GPU - error: [XORG] (EE) NVIDIA (0): failed to initialize the NVIDIA GPU to PCI:1:0:0.  Please
  [15874.898748] [DEBUG] Socket closed.
  
  [15874.898790] [ERROR] abandonment because the backup is disabled.
  
  [15874.898803] [DEBUG] kill all other processes.
  ----
  $ dmesg | tail
  
  [15687.546400] NVRM: rm_init_adapter (0) failed
  
  [15754.954991] NVRM: impossible to copy vbios for system memory.
  
  [15754.956859] NVRM: RmInitAdapter failed! (0 x 30: 0xffffffff:867)
  
  [15754.956868] NVRM: rm_init_adapter (0) failed
  
  [15873.990268] NVRM: impossible to copy vbios for system memory.
  
  [15873.992196] NVRM: RmInitAdapter failed! (0 x 30: 0xffffffff:867)
  
  [15873.992205] NVRM: rm_init_adapter (0) failed
  
  [15885.811425] NVRM: impossible to copy vbios for system memory.
  
  [15885.813323] NVRM: RmInitAdapter failed! (0 x 30: 0xffffffff:867)
  
  [15885.813332] NVRM: rm_init_adapter (0) failed
  ----
  $ sudo bumblebeed - debug
  
  [16077.147754] [DEBUG] bbswitch has been detected.
  
  Method of switching [INFO] [16077.147856] 'bbswitch' is available and will be used.
  
  [16077.147896] Setup Active [DEBUG]:
  
  Configuration file [16077.147932] [DEBUG] bumblebeed: /etc/bumblebee/bumblebee.conf
  
  [16077.147968] X [DEBUG] display: 8
  
  [16077.148021] [DEBUG] LD_LIBRARY_PATH: / usr/lib/nvidia-current: / usr/lib32/nvidia-current
  
  [16077.148062] Socket [DEBUG] path: /var/run/bumblebee.socket
  
  [16077.148098] [DEBUG] pidfile: /var/run/bumblebeed.pid
  
  Xorg.conf file [DEBUG] [16077.148134]: /etc/bumblebee/xorg.conf.nvidia
  
  [16077.148172] [DEBUG] xorg.conf.d dir: /etc/bumblebee/xorg.conf.d
  
  [16077.148207] [DEBUG] ModulePath: / usr/lib/nvidia-current/xorg, / usr/lib/xorg/modules
  
  [16077.148243] name [DEBUG] GID: Bumblebee
  
  Method of power [DEBUG] [16077.148278]: auto
  
  [16077.148314] [DEBUG] stop X to the output: 1
  
  [16077.148349] [DEBUG] Driver: nvidia
  
  [16077.148383] [DEBUG] Driver module: nvidia_304
  
  Stop State [DEBUG] map [16077.148418]: 1
  
  [16077.148673] [DEBUG] Process/sbin/modprobe started, 5234 PID.
  
  [16077.148791] [DEBUG] hide stderr for execution of/sbin/modprobe
  
  [16077.152464] [DEBUG] SIGCHILD received, but the wait failed with no child process
  
  [16077.152571] [DEBUG] Configuration test passed.

  
  [16077.152786] [ERROR] Daemon, already running, pid 2256

  ----

  modinfo nvidia_304 $
  file name: /lib/modules/3.13.0-24-generic/kernel/drivers/char/drm/nvidia_304.ko
  alias: char-major - 195-*.
  version: 304.117
  support: external
  License: NVIDIA
  alias: pci:v000010DEd00000E00sv * sd * bc04sc80i00 *.
  alias: pci:v000010DEd00000AA3sv * sd * bc0Bsc40i00 *.
  alias: pci:v000010DEd * sv * sd * bc03sc02i00 *.
  alias: pci:v000010DEd * sv * sd * bc03sc00i00 *.
  depends on:
  vermagic: 3.13.0 - 24-generic SMP, modversions mod_unload
  parm: NVreg_EnableVia4x:int
  parm: NVreg_EnableALiAGP:int
  parm: NVreg_ReqAGPRate:int
  parm: NVreg_EnableAGPSBA:int
  parm: NVreg_EnableAGPFW:int
  parm: NVreg_Mobile:int
  parm: NVreg_ResmanDebugLevel:int
  parm: NVreg_RmLogonRC:int
  parm: NVreg_ModifyDeviceFiles:int
  parm: NVreg_DeviceFileUID:int
  parm: NVreg_DeviceFileGID:int
  parm: NVreg_DeviceFileMode:int
  parm: NVreg_RemapLimit:int
  parm: NVreg_UpdateMemoryTypes:int
  parm: NVreg_InitializeSystemMemoryAllocations:int
  parm: NVreg_UseVBios:int
  parm: NVreg_RMEdgeIntrCheck:int
  parm: NVreg_UsePageAttributeTable:int
  parm: NVreg_EnableMSI:int
  parm: NVreg_MapRegistersEarly:int
  parm: NVreg_RegisterForACPIEvents:int
  parm: NVreg_RegistryDwords:charp
  parm: NVreg_RmMsg:charp
  parm: NVreg_NvAGP:int

  I have no experience with anything else that Fedora works on my W520, but before installing dual boot linux partition, I turn it on discrete rule. It is a bit of annoyance to have this go in the BIOS before the OS, but it of the only way I got everything to go smooth and figures.

• Connecting to a server 10 Linux window and window 7 causes a connection timeout

  I have configured a certain configuration of Linux server in network.

  10 and the window 7 window causes a connection timeout when connecting to these servers.

  I tried to connect these servers with Windows not as Android and Mac but also Windows XP system and I connect to these server just fine so I don't think it's a firewall issue.

  I have also connected to these servers very well in the past with window 10 and Windows 7 so I think that the issue is a recent update of security Windows.

  Then I tried these problems myself but have no chance to find a solution

  I can also give you site to see the problem www.ozanet.com

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• How to remove GRUB Linux Bootloader and restore XP bootloader (default)?

  I have XP and Linux in multiboot.

  At the start of GRUB boots XP and wait for 5 seconds. If I press a key it appears a list

  -fedora

  -Other

  Choose 'Other' start XP.

  I want this set GRUB to remove. I want the default XP bootloader.

  I don't LIKE on Linux. Do you have a solution?

  Maryse Agarwal

  I got to know this-

  go to the recovery console

  Type fixboot

  type fixmbr

  Type fixboot

  and you're done... Removed GRUB and you're back in windows bootloader

  ____________________________________________________________

  I thought that this would be answered by the moderator.

  Maryse Agarwal

• Help to "problem"-WRT54G, Linux, Unix and Windows ".

  I have a Linksys WRT54G rev 6, firmware version v8.00.7 011, July 27, 2009.  My ADSL modem is a modem DSL from Westell G90-610014-20 revD.  My home network is 'predominantly' Windows wireless clients and a wireless printer, who don't have no problems or issues between them.  These 2 PC can see each other, share files, print, see internet, etc.  My PDA Smart Phone connect wireless... the grand-kids PSP jumps in full and they are all happy.

  Then, a few steps in my box... Multi-boot with Win7 Pro 64-bit, Windows Vista Home Premium 64-bit, Ubuntu 10.04 LTS Desktop Edition 64-bit, OpenSolaris 2010.03 snv_134 and some other OS' are.  It is connected to the #2 router's ethernet port.  This PC connects to the internet very well with all OS' are.  When I start to the top of any OS "Windows" on the subject, I can see the entire network, connect, fileshare, printing, etc. Life is beautiful...

  When this PC is displayed under Ubuntu, OpenSolaris or Solaris - I have internet and I can print.  I can see 'only' the router, modem and printer (and not the other PC) I can ping the router, printer and modem (not the other PC through services called) or intellectual property.  I can not connect, fileshare, etc..  In these OS' are I Samba, CIFS, Wins, etc. installed.  My windows clients cannot see my PC either, BUT I can ping and mount the fileshares to this PC via the IP (not via the designated services. If I boot one of this Windows Linux clients, this PC can see my PC with the IP address and name services.  Linux to linux, he'll see, connect, share.  I had 'other recheck my config on Samba, CIFS and wins... and nobody can find any problems there.

  I see 'all' clients in the Client DHCP of the router table.  The router is dynamically assign addresses without any conflicts.  The router I ping the Linux/Unix/Windows (my) box.  It cannot ping my windows wireless clients.  All "client" devices have DHCP enabled with autoconfig.

  At first I thought I had a double NAT courses so I filled the modem and the reconfig'ed my router to the router to the modem of the equation.  (Now just a stupid modem.)  Time of Internet connection are now vantastic... improved my time to download updates and upgrades and network load is down... BUT, the same problems/no change.

  I turned "logging" the router, but as of yet, I have not found where those who connect so I can revisit!  I wonder if I have something to do between the wire &... but that "should" be transparent shouldn't it?  I don't know if "everything that he must have spent, or if something is filtering or stop"it "(?)"  I'm really running out of ideas on what to check, test, change... on what "might" happen.

  Help!

  Thank you... 'All' went through on my desktop and my network and I was doing the wrong assumptions.  The last PC for installation on this network was my office, so I assumed that it connect to my laptop, it was a problem with the desktop computer.

  What I've discovered, is that it "is" the problem of the laptop (on the contrary), somewhere in the services of the Windows Vista Home Premium network or settings, device drivers, etc..  "Is not" (or at least now) a router or hardware problem.

  He kept bothers me, I couldn't ping my laptop from my PC, or my router.  I had no access to customers 'other' Windows until late last night, when I found that 'they' have connection problems and ping the laptop too!  I guess...

  I started this laptop on a Ubuntu 10.10 Desktop Edition LiveCD - and then could ping to it to both my desktop PC and my router, configuration this laptop in wireless (same device) and connect to the same wireless network.  Sort, which confirms that this is not a hardware problem on the laptop.  It confirms that it is not a router or network problem.  It narrows down my path to how 'Vista' networking services, device drivers, settings, etc. from Vista. The hunt continues, but this thread is "finished".  The problem lies elsewhere...

• DCB - Force10 MXL and Equallogic PS6210 - worth it or not?

  Hello all

  I have a new 3-blade M620 virtualization environment, 2 x MXL Force10 switches and 2 x Equallogic PS6210 - there is the possibility of using DCB - is it useful to configure DCB, will I get the gains and better stability, or for a small environment should I just use the configuration standard iscsi?

  Ideas or alternative options gratefully received.

  Thank you

  Hello

  If the switches are dedicated for iSCSI use, then there is no advantage to the use of DCB.  DCB in itself does not have iSCSI faster.  I just made sure non-iSCSI traffic doesn't interfere by providing iSCSI with a higher priority.  All other traffic is going in a "lossy" class of service.

  Also, you will need DCB converged network adapters to use BCD on the hosts.  Most of the iSCSI software adapters do not support DCB.

  Kind regards

• L5V-00001 Sculpt ergonomic keyboard mouse with KVM and Wireless Office

  Transmitter/receiver plugs directly into the PC, the keyboard and mouse both work very well.

  When the transmitter/receiver plugs into the USB port on the KVM switch, only works for keyboard, the mouse seems dead, but gives PC meet the win button (blue button) on the mouse.

  I have to use KVM in my env work and also really want to use Sculpt costume

  so please help me what KVM switch could support L5V - 00001 Sculpt ergonomic Wireless Desktop

  Hello

  Please contact Microsoft Community.

  I want to tell you that the KVM are you using currently has a problem. All KVM switches generally support the mouse model you mentioned...

  So, you can contact the KVM manufacturer in this regard. Or you can use your favorite search engine to buy a new one.

  Note:

  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  I hope this helps.

• Linux server and/or version?

  Is there the intention to make available for linux guests?

  Also, can I use it to connect to my network management server and then jump for my IOS devices?

  Best regards

  Tim

  Hi Tim,.

  We evaluate the implementation of a Linux client. You can use a jump server to connect to a Cisco device in the current building. However, you will need to hit the "Refresh button" bottom right of your Terminal Services session once you have successfully connected in the Cisco device supported. To initiate a refresh, you should see the process 'show version' detection and display of IOS. All supported IOS tools should be available then. See screenshot below.

  FOR INFO. Make sure you have rights to publish a 'show' version or the update will not work correctly.

  Let's automate this in a future release to make it as transparent as possible.

  Kind regards

  John

  Refresh.jpg