STATE 7 MORE

Similar Questions

• Appellant States in a state machine more than once

  Hello again,

  Is there a way to call a State in a state machine after that he ran already? In order to develop, I have a program that will put pressure in increments of 20% and will then write to a file. Once it is done with the rule of higher pressure (100%), I want it repeated the test, but this time in decrements of 20%. So it will do:

  1. set the pressure at the lowest point

  2 meter to read and write the value

  3. set the pressure at 20%

  4 meter to read and write the value

  All the way up to 100%, then:

  5. set the pressure to 80%

  6 meter to read and write the value

  7. set the pressure at 60%

  8 meter to read and write the value

  All the way to the lowest point.

  Is there a way to do so instead of making a State for reading and writing to each percentage? In this way I haven't read Agilent 20% increment, Agilent read 40% increment, etc..

  I have attached the code to explain what I mean.

  Thank you all, still a newbie

  
  

• in the waking state socket connection problem

  Hi all.
  My app need update real-time security data, it should be able to run well even the switch of the PB in the waking state.
  The problem is that when PB passes to the waking state and more than an hour later, my application cannot send request for data to the socket server (initially he workd well), even when the PB get again enabled, the socket connection is also unnecessary.
  I did a test as follows:
  1, I added the "throttled" in the blackberry - tablet.xml
  2. I have add a few listiner event in the main class, but each of them can be fired in any time.

  QNXSystem.system.addEventListener(qnx.events.QNXSystemEvent.STANDBY,onDeactive);
  QNXSystem.system.addEventListener(qnx.events.QNXSystemEvent.ACTIVE,onActive);
  QNXSystem.system.requestResource(QNXSystemResource.NETWORKING);
  stage.addEventListener(Event.USER_IDLE,userIdle);
  stage.addEventListener(Event.USER_PRESENT,userPresent);
  stage.addEventListener(Event.ACTIVATE,onStageActive);
  stage.addEventListener(Event.DEACTIVATE,onStageDeactive);
  

  3, I put a clock to save information in / shared folder.it worked well in the waking state.

  Thanks for any response.

  Hello.
  I'm a developer of instant messaging which is connected to the door via socket. What I can tell you for sure I you need to use:
  normal
  That, to use SocketMonitor to ensure that connections are available, some WiFi routers can close idle connection event when U don't want to! If you need to reconnect in such cases.
  Please, feel free to ask for help more.

• PIX: Route statement

  quick question...

  If I have 2 statements of itinerary:

  Route outside 0.0.0.0 0.0.0.0 192.168.1.1

  and the other

  Route outside 172.10.10.10 255.255.255.255 192.168.2.1.

  the first route is better than the other?

  The road more long match on the prefix is priority, i.e. the packets intended for the host 172.10.10.10 will use the 192.168.2.1 gateway. Packages to other destinations will use the default gateway 192.168.1.1.

  That's because the path pointing to the 172.10.10.10/32 statement is more specific than the other, which in fact is not specific at all, that it points to any destination, not known to the system.

  Hope I've been helpful.

  Kind regards

• Which statement takes longer in a block?

  Hello
  
  I have a block plsql with thousands of sql in it, statements line by line.
  
  My query is how can I know what individual sql statement takes more time.
  
  Thank you
  VInod

  You can also find your session, execute your code, and check the tkprof sorted by execution/fetch time to check this.

• MC with 4 button States

  HI -.
  I'm using an MC for a button. It has more than 4 States, up, down and... 10 images apart on the timeline.
  The first onRelease brings the mc as a "hold." Next on the release he would return to "high." The problem arises when the onRollOver occurs. Jumps in chronology of the mc to the State of 'more' so I can't live with something like "if we hold then click on-site.
  
  How can I do this?

  If you try to create a use of toggle:

• Poosibility of the reorganization of settings in Discoverer Viewer or more?

  Hi all
  
  I have a report that has about 30 parameters.
  The problem is that whn we open State and more Viewer first see us the long list of parameters and below we can see the results.
  My question is that... Is it possible to organize the parameters as shown below?
  
  Param01 _ Param06 _
  Param02 _ Param07 _
  Param03 _ Param08 _
  Param04 _ Param09 _
  Param05 _ _ Param10
  
  Thank you
  VJ

  Hi Vj
  Ask you some good questions.

  I'm afraid that the answer is no. We cannot change the look and feel of place settings beside you requested. They appear in a list. You can change the order in which they are presented using more tools | Parameters of monitoring by using the up and down buttons.

  Best wishes
  Michael

• Why the selection of 'never activate' in the menu 'tools' does not stop the Acrobat Flash running when selected?

  When the option 'request to activate'-'You Tube' blocks Flash from Adobe, but 'request to activate' is no longer on Yahoo Home Page
  appear (to DATE). When I chose 'never activate', even the car of You Tube active!

  Also, I noticed there is an add-on special to control the Adobe Flash Player. Why is there a special module where it can be controlled from the designations of add-on "Tools"? What has changed since the last version of Firefox has been installed
  on January 17. With the Adobe Flash has major problems, it's an extremely serious problem.

  It is not the computer. Nothing has changed on the computer other than the latest version of Firefox being installed.

  ANY SUGGESTIONS WILL BE APPRECIATED.

  I checked the State once more, and since I returned to the "application activation", I'm going to is no longer the problem mentioned above on Yahoo.

  I've reconfigured one of the addresses on Yahoo, and all of a sudden, everything is back to its previous state. My apologies for the assistance requested (perhaps) premature.

• Why my iMac stop or stagnate after awhile?

  I have system preferences: energy saver > computer sleep (never) and > display sleep (15 min), but the computer cannot be started after leave in this State for more than half an hour.  When I click on the space bar on my keyboard to open the computer, I only now see a semi glossy screen.  I can't deceive it to touching or by pressing the switch market/behind the screen lower left or by the removal of the special keyboard keys.  Why this happens and how I can it avoid in the future?

  You send messages in the forum for older Macs PowerPC category, but you seem to have a newer iMac based on your profile information.  If so, try to do a reset SMC (power management)

  Reset the management system (SCM) controller on your Mac - Apple Support

  For an iMac, it's basically unplug the power cord and reconnect using the procedure described in the document.

  You can also do the procedure to Reset NVRAM (PRAM) too

  How to reset the NVRAM on your Mac - Apple Support

• I need to keep previous iTunes libraries

  I just consolidated my iTunes library and then he backed up to an external drive.  When I looked at the iTunes music folder it has literally doubled in size, from 40 GB to 80 GB.  I noticed the previous iTunes libraries folder was almost as big as my music folder - I really need to keep the record previous libraries?

  The previous iTunes libraries folder contains copies dated the base of iTunes ( iTunes Library.itl file) that are created automatically when some (but not all) iTunes updates - this only happens when the update includes a change to the structure of the database.  Unless you think you'll never go back to a very old version of iTunes, you can safely remove all but the most recent of these files in the previous iTunes libraries folder.

  However, it is probably not related to the increased use of disc that you see.  My main iTunes library is about 1 TB; the previous iTunes Libraries folder is approximately 53 MB (containing copies of the file iTunes Library.itl since the three latest updates which included a database change, from October 2014, 2015 in June and July 2015).  I suspect that what you see is a consequence of the operation of the process of consolidation of library.  When you use this feature, iTunes will copy all the multimedia files that are not located in the folder location standard iTunes Media in this folder structure.  The original versions of media files, however, is more related to the iTunes library database, remain where they are.  Is it possible that you have media files/folders in the previous iTunes libraries folder?  In normal operation configuration / this should only include the copies dated of the database file:

  

  My suggestion would be to backup your complete library right now to a suitable device, remove everything in the previous iTunes libraries folder with the exception of the most recent iTunes Library aaaa-mm-jj .itl file, start iTunes and verify that you can read and sync everything as planned.  If so, you are ready to go - otherwise, you can use backup to restore files from the library to their previous state for more investigations.

• Satellite P850 - Bluetooth - wireless in same range of radio frequencies

  Hello world

  My laptop has received the following message for a while:

  Devices Bluetooth (TM) and WirelessLAN function in the same radio frequency range and may interfere with each other.

  If you use Bluetooth devices and WirelessLAN simultaneously, you can sometimes meet optimal network performance or even lose your network connection.

  In this case, always stop using your Bluetooth or WirelessLAN.
  Please contact Toshiba PC product support website
  http://www.Toshiba-Europe.com/computers/TNT/Bluetooth.htm in Europe or www.pc.support.global.toshiba.com in the United States for more information.

  I was unable to solve.
  It does not seem to affect much on the bluetooth, but wireless is a disaster.
  Sometimes it slows down even the computer.

  I googled no site Web indicates a conflict without wireless/bluetooth.

  Everyone knows about this problem?
  And nobody knows if the wireless adapter is bluetooth built-in (as in a combo)?

  See you soon,.
  Juan

  Don't know what Wlan module you have, but especially books use a Wlan / BT combo module and a module supports both: wireless and connectivity BT.

  If noticed some signal interference between WiFi and BT, I recommend you to disable BT in case you use Wlan connectivity. In the case where you use BT, disable Wlan.

• LTCC causes bad work at the G20-105 in standby mode

  Hello
  Does anyone have a solution for LTCC dysfunction?
  I have the Qosmio power to the bottom of the screen the value after 5 minutes to be left blank. After another five minutes, a password is required to reactivate the desktop computer - eve of all kinds. If the machine finds himself alone in this State for more than 20 minutes, when I start it up again, the processor performance works 100%, a nVidia popup informs me that LTCC has not responded and which is confirmed in the Task Manager. LTCC is a component of Norton AntiVirus [http://www.neuber.com/taskmanager/process/ccapp.exe.html overweight
  ] which is sold with the G20 and uses up to 40 MB of RAM during normal operation. The machine is actually useless until you restart. Everyone knows similar?

  Hello MeMo

  Here is the answer to Symantecabout this problem:
  There may be a conflict of schedule when Windows loads. For this reason, it is possible to load ccApp.exe later.

  The ccApp.exe value must be removed from the regedit Editor. Do it on this path:
  1. Select start > run and put regedit inside. Click OK
  2. go in entVersion entVersion\Run in Regedit Editor
  3. on the right window, click ccApp.exe
  4. tap on DELETE and then OK
  5. close the registry editor

  After that ccApp.exe should be added to the Autostart folder.

  Good luck!

• flashing yellow, but have Internet on AE?

  Had wifi problems.  So, had the new Brighthouse modem with existing Airport Extreme.  EI only flashes yellow and will not go green, however, I have a wifi Internet connection!  I'm puzzled.  Anyone know what is happening?

  You can find out what is happening by checking the status utility AirPort

  Open AirPort Utility (Finder > Applications > utilities > AirPort Utility)

  Click the AirPort Extreme

  Search for status in the small window that appears

  What is the message next to status?

  Now click on the little yellow dot next to the State for more information on the 'question' and suggestions to solve the problem

• Tecra M4 - WLan & BT broadcast on the same frequency

  Dears I have problem with my Toshiba laptop tecra m4 and I did the below:
  # disabled Bluetooth, infra & LAN (no result)
  # Update driver Intel pro 2200 wireless (no result)
  # change frequency (no result)
  # updated the wood driver (no result)
  Please note that I can connect WiFi only in the same room that the wireless device exists and after connect go to unplug every minute

  Can I connect a wireless network to the same machine room wireless and when I connected the LAN disconnected every minute

  On the otherhand, I got the message on the screen of my laptop below:

  Bluetooth (TM) and LAN wireless devices operating in the same frequency range and may interfere with each other. If you use Bluetooth devices, and at the same time, wireless LAN you can sometimes meet optimal network performance or even lose your network connection. In this case, always stop the exploitation of your wireless LAN or Bluetooth (TM). Please contact Toshiba PC compatible product on the web site

  [http://www.toshiba-europe.com/computers/tnt/bluetooth.htm] in Europe or

  [http://www.pc.support.global.toshiba.com/] to the United States for more information.

  Help is a high apprciated

  Hello

  It seems that BT is enabled with the WLan card and this affects the WLan functionality.

  Try to disable the BT and choose only the LAN card, using the FN + F8 key combination.

  Welcome them

• Internet decreases when it is connected to time capsule

  When my iMac is connected to my Time Capsule Ethernet, I can't connect to the internet at the same time.  If I unplug the ethernet cable from the TC, internet works fine.  I use the TC that for TM backups - I it was not connected to the ADSL router via WAN port.  This configuration has worked perfectly for about a year, then stop working and I cannot identify what has changed at the same time.

  Status light blinks orange if the cable connected or not.

  Status light blinks orange if the cable connected or not.

  Find out why by opening AirPort Utility on your Mac by clicking on the image of the time capsules

  Search for status in the small window that appears

  Click on the small yellow dot next to the State for more information on think the Time Capsule is bad