Tecra M4 - WLan & BT broadcast on the same frequency

Similar Questions

• Re: Satellite L735 PSK0CE: WLan and BT use the same frequency

  Hello world

  I reinstalled my Toshiba Satellite L735 - PSK0CE with Windows 7, until the one and download all the drivers for it, I did not too Wirelles conection, Lan and the wirelless use the same channell radiofrecuency than Bluetooth

  Can you help me with this problem?

  Thanks in advance

  Post edited by: aku - aku

  Hello

  WiFi and BT use the same frequency. For the most part this isn't a big problem but in case you notice a few connection problems with WLan or BT, you must disable WLan using BT or must turn off BT if you want to use the WLan.

• Satellite Pro L770 - 14 H - the use of WLan and Bluetooth at the same time

  I have a Satellite Pro L770 - 14H and you want to use a Bluetooth mouse.
  With the 'FN' and F8 key I am capable of coding between WLAN and Bluetooth, but it is not possibel to have both at the same time.

  My question is: How can I have WLAN and Bluetooth at the same time?
  To use a Bluetooth mouse with WLAN connection.

  Thank you very much
  Helmut

  Hello

  Using Win 8.1?

  Usually you could turn on and off Bluetooth in Win 8.1
  Settings PC-> PC &-> of Bluetooth devices

  There, you can move the cursor to BT for THE position.

• Satellite P10-304: replacing a WLan card - can I the same WiFi chip?

  Hi all

  got a satellite P10-304 of a companion here.
  He said the free thread never worked on it and hes had it years and someone else has already looked at and changed the TNA wireless card.

  Basically, she acts only as the wireless switch does not work and it remains permanently off the coast, although the drivers install correctly and map also shows ok. Simply disconnected.

  Now, I thought, okay, I'll take a look because I'm pretty good on the old hardware. Has taken apart and this you know, switch has been bent and not up. I handed the place, checked the switch and stop positions with a multimeter to check the switch worked and he was doing his job perfectly.

  Now it still doesn't.
  I guess it is now due to the fact that as I said, the map has been changed since its origin to a processor intel pro jobby.

  My question is, I'm right, do I just need to get the same card that was originally in it. I assumed that when the switch is set correct return, that I solved it.

  Hello

  The WiFi card must be activated bu switching the switch TO the position (the LED must illuminate) and in addition, you should choose the WLan antenna using the FN + F8 key combination.

  Please check this!

  Notes; go to Device Manager-> properties-> Advanced tab Wlan card
  There you can check if the WiFi is enabled as well.

• 7 the media library window not appear one of the free channels via antenna after the broadcaster changed the transmission frequency

  -Media Center detects my mate video Vista E900F Dual TV tuner

  -Everything is free in the atmosphere of the channels worked fine before all broadcasters, including "SBS" by changing its broadcasting frequency

  -After SBS has changed its frequency, it needed a new scanning channels, announced on their web site.

  -All detected library channels same SBS at its new frequency, the signal strength is 100% and the "Program Guide" works, but when you select the SBS channel to display a blue screen appears with a support message center saying "no TV Signal there is no signal detected, the station may be off the air, don't check your antenna" despite the fact that there is 100% signal strength and all other channels work fine. Rules of the antenna as the problem.

  -Software "Compro DTV4" provided with the tuner card has also demanded a new analysis of the channels and all the channels has worked well after the new analysis including SBS. Exclude a hardware problem with the tuner card. I don't like this program and prefer to use the Media Center.

  -All windows updates have been applied, and all drivers are up to date.

  -All signs point to a problem with the windows media center software. Perform an internet search this question gives to think I'm not the only one having this problem but I can't find a solution.

  Someone please help.

  I had the same problem with TDT, Eleven and One HD, after many, many hours of searching I found a working driver.

  I think that this driver is at NXP for a version of Phillips of the card.

  https://Mega.co.nz/#! f8VSmYLA! HSA6Mg_heMyAkVzyVPzAE1mJbM1qRvESx1kvBkxC00Q

  This driver is x 64, and it works for Windows Media Center on Windows 7.
  Nevermind Compro were too useless to fix their product.

• Sampling of multiple channels on the same frequency

  I have some problems to understand how to configure my cDAQ chassis.  I have a work labview program that should (I guess it doesn't!) sample 5 channels at 5 Hz each channel.  When I got the system data each analog channel (all in the same spot) resembles a ~1.xx Hz sampling.

  I created my task to taste 3 analogue to 5 Hz, 1 sample per channel.  It gives me a sample rate effectiveness of sample of 1,666 Hz per channel?  That's what seem to tell me my data.

  If the above is true, change my task to make a sample 3 channels at 15 Hz, 1 sample per channel will give me a sampling rate of efficiency of 5 Hz per channel?

  The other 2 channels are digital and on another task and appear to be working (fingers crossed!)

  Thank you and happy holidays.

  Kyle

  I can post code if this confusing issue.

  
  

• Tecra 9100: I want to use the same settings in all user profiles

  I use it on a Tecra 9100 (if it matters).

  Is it possible to export my settings (best for all profiles at a time), to copy it to another windows user? and any other laptop Tecra 9100? I work with two user accounts on my laptop (one for businesses, a private), I did all the settings as I want, but in the other user account, it comes with factory settings, so I guess that these settings are stored for each user separately.

  And if it's possible, I want to copy the settings for laptop computer to my colleague too.

  Hello

  I have gift? t know exactly what settings you use, but as far as I know just administrator have full control over the tools pre-installed and utilities. As an administrator, you can give an administrative access level.

  On the copy on another machine I can't tell you much, but I guess it must be configured individual.

• Satellite C660-1me - bluetooth & Wlan operate within the same radio frequency

  My alptop is Satellite C660-1me
  I downloaded all the drivers from the toshiba site, today only a window appeared, says the following:

  + bluetooth and lan devices operating in the same range of radio frequency wireless and may interfere with one another.

  Can u please help to figrue the problem and solve it.

  Thank you very much

  Hello

  This isn't a problem, but it is a simple system reviews.

  This means that your WLan works according to the same frequency as Bluetooth.

  Usually the 802. 11 B and G WLan standard using the 2.4 GHz and this frequency is also used by Bluetooth

  So if you use WiFi, disable the BT NOT to use two devices at the same time!

• EliteBook 8460p: at the same time LAN & WLAN using problem

  Hello

  I can't use my elitebook 8460p network (LAN), Wireless Network (WLAN) and local at the same time. Both are well configured. The sequence is that when I connect the official LAN in the laptop cable, existing wireless network automatically becomes invalid. If I unplug the LAN, WIFI will automatically connect to the network. Why this is happening, I don't know. Please, help me.

  Info:

  * windows 7 Professional 64-bit.

  * If I press the key again wlan connection both LAN and WLAN, it does not work and will automatically reconnect if the network cable is unplugged.

  I know this isn't OS related issue. I know well on the network configuration. It is the first case and applies only to this model (here 8460p). If there is any related issue of BIOS, please help me. I developed, but not found.

  Help me, please.

  Hello:

  There is a setting in the BIOS called LAN/WLAN switching.

  The setting is enabled by default.

  If you want to have the wireless and ethernet, working at the same time, go into BIOS, find and disable the LAN/WLAN, commissioning, save the changes and exit the BIOS.

• BT and WLAN works within the same radio frequency range?

  Damage Bluetooth and wireless LAN operated in the same frequency range and may interfere with each other

  I do what is not your problem, but the fact is that you can use both devices at the same time. And it works perfectly.
  Just for example: I hear web radio, use a BT headset and my laptop is connected to WIFI. No problem at all.

• Record media of conflict on the same channel Center

  Hello

  I use windows vista ultimate.

  In windows media center, I have planned 2 programs on the same channel, "koppen xl" and "slimste mens '.
  A program is broadcast just after another on the same channel.
  ->, They are automatically on demand because I recorded the series.
  A weird error tells me that there is a conflict of record between these 2, how is this possible?

  Normally, a conflict would exist if I want to record 2 programs that are broadcast at the same time on different channels...
  But this is crazy.

  Therefore, I am not able to resolve the conflict record!

  Screenshots:

  http://files.driesp.be/upload/uploads/mediacenter_1.PNG
  http://files.driesp.be/upload/uploads/mediacenter_2.PNG
  http://files.driesp.be/upload/uploads/mediacenter_3.PNG
  http://files.driesp.be/upload/uploads/mediacenter_4.PNG
  http://files.driesp.be/upload/uploads/mediacenter_5.PNG
  There must be a bug in windows media center.
  Thank you in advance.
  Hello
   
  Follow the steps in the article to resolve the problem.
   
  Resolve recording conflicts in Windows Media Center
  http://Windows.Microsoft.com/en-us/Windows7/resolve-recording-conflicts-in-Windows-Media-Center
  (Valid also for Windows Vista)
  
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• iPhone and iMac must be on the same band?

  I have the Apple Airport TimeCapsule so and it is dual band then the 2.4 GHz and 5 GHz are both active. I would have my iMac connected to the iPhone 5 GHz and m to be connected to the 2.4 Ghz but it is impossible, as if I connect to my iPhone, the same frequency band is simultaneously connected to the iMac! I get something wrong? How can I fix? Thank you.

  The 2.4 GHz band is much stronger that the 5 GHz band, the iMac won't to connect at 5 GHz, unless it is in the same room or very close to the time Capsule. The reason is that Mac get the strongest... not the fastest signal signal.

  What can you tell us about the location of the iMac with respect to time Capsule?

  If this isn't in the same room as the time Capsule, how walls, ceilings or other obstacles are there in the path of the direct signal between the iMac and Time Capsule?

• Generation and acquisition at the same time, acquisition of data USB-6356

  Hello

  I have a VI how is able to read entries with a USB DAQ-6356 and I use a generator of signals 'Agilent 33522 A '. I want to generate and acquire with the acquisition of data.

  In fact it works but not well, the frequency is not very stable and does not stop the 2nd loop with 1 (2nd is generating, 1 is Acquire).

  Thanks in advance

  P.S my VI isn't a state machine true because I need to fight against it at the moment.

  OK, so you're at 3 ms/s in writing and reading at 1.25Ms / sec and you wonder why he has a little difference in the frequency set?  Ideally, you want to read and write to share a sample clock but by selecting at least the same frequency clock (or one that is one multiple of the other) would go a long way to fixing this source of your error.

  The second source of error: you generate a contineous waveform.  unless you select 'whole number of cycles' there is a discontinuity when the end is reached at an arbitrary phase and the phase is reset to zero at the beginning of the wave.  DAQ assistant writing can "Use Waveform Timing" to adapt its sync settings to the dt waveform and the number of samples.

• Tecra M6-EZ6612: Bluetooth and WLan operate at the same radio frequency range

  Hi all

  I have a laptop that is Tecra M6-EZ6612...
  I have a problem that when I install the bluetooth I have a massege indicating a conflict between the wireless and bluetooth...

  Two of them are working in the same radio frequency range!
  So, I wonder how I can change the frequency range of the bluetooth device? !!!

  Not like about it. Material Bluetooth v1.2 or v2.0 have included technology called AFH = "Adaptive Frequency Hopping" that tries to avoid conflict with WLAN. It can only be a problem if you have a very old hardware BT (before 2004).

• More often than in other music Apple will not be broadcast on my iMac, but at the same time, it will be on my iPad

  I am continually frustrated with Apple's music streaming on my iMac.  Looks like a song loads, but never gets started playing.  I always thought the problem was my internet connection, but lately I discovered that, although my iMac does not load a song, if at the same time, I use my iPad on my wifi it loads and plays immediately.  What is the problem with the music does not not on my iMac?

  Hello Lucyskye,

  Thank you for asking your question here in Apple Support communities. I understand you want to be able to play your music. I can't do anything without my music all day. Let me give you what I can to help you solve this and get your music to play on the iMac.

  I don't want to bring music to Apple implemented correctly first. Apple's music composition only allows you to stream music from Apple on one device at a time, unless you have a family membership. Even if you have a family membership, you can still only broadcast on one device at a time by Apple ID. For this reason, I suggest isolate us the devices first and this test with the iMac.

  1. exit the Apple music on the iPad. Please leave the app. You can do this by double tapping the home screen and drag the application to the top music. This article has the instructions and example pictures. Force a nearby application on your iPhone, iPad or iPod touch

  2. restart the iMac.

  3. If the problem persists, start the iMac in Mode safe mode and see if the load and play songs. (Although the speakers will be disabled, just visually see if she manages to go anywhere where it usually hangs up on. This article talks about fashion without failure: try safe mode if your Mac does not start-up

  4. you want to then also to test in a Test user. This article helps with that. How to test a question in another account on your Mac user

  If the problems remain and music will not play on the iMac in Mode without failure or user Test, then we want to stop the iMac. Back to the iPad, then click Settings > cellular and disable cellular data for a while. Make sure your iPad is only able to use a Wi - Fi connection and not able to access cellular data if the songs will not play on your Wi - Fi network. Then, open the app music again and try to play a song.

  If the music will not play one cell time is off, the cause is some parameters with your wireless network. You can check this information for the most common causes of problems with home networks. First of all, make sure that you use a wireless network open as your home network. If you connect to a Wi-Fi as a school, work, or other business, the airport, a military base or a hotspot of a network type, it probably won't work because these types of high security and high traffic and high security networks. They do not have the necessary data back causing problems exactly like the one you are currently experiencing.

  Do you use any third-party firewall (even on the router!), protection against viruses or proxies (which hide your identity on the internet)? Some security applications also do, but are called only for security or VPN. These few apps with names like Astrall or Webroot Secure Anywhere Antivirus, antimalware apps. There are literally hundreds of these applications that block the incoming ports that will not allow the function runs.

  If you want to check that the port is open on your iMac and the network, you can use this article: port TCP test between computers and peripheral connectivity. Apple music uses port 80, and iTunes music sharing is port 3689. You can find a list of all the ports used by Apple here: TCP and UDP ports used by Apple software.

  You can also find these two useful articles if you find that the problem is with your network.

  Recommended settings for the WiFi routers and access points

  Solve the problems between iTunes and third-party security software

  Don't forget to turn your cellular data within settings > cellular on the iPad once you're done test. Just in case music plays in Safe Mode or the Test user, you work through this article to resolve the issue. Mac OS x: how to solve a problem of software.

  Thanks again and have a great rest of your day!