State of the configuration of firewall IPv6 on R7000

Similar Questions

• How can I put the Windows XP firewall in a port configuration 'allow all' and only block some ports?

  Without going into the details of why I need to do this, I'm putting the firewall of Windows XP in one allow all the configuration of ports and only refuse some ports I have in a list.

  I train this script via the command-line batch with the netsh firewall add portopening command.  From what I've read, if enabled the firewall denies all traffic and only allows ports with exceptions, so through batch scripts, I opened all the 65 000 + ports TCP and UDP, essentially with the firewall turned on but in a configuration of "allow all the»  I don't deny the 100 or so ports to my list that I want blocked after they are all open.

  This strategy seems to work, but the problem I waited and I now see is that svchost.exe takes 50% of my CPU time, have to deal with constantly these firewall rules.

  "From what I've seen on Windows XP, there is no way to have the firewall ON, and in a configuration of" allow all the "" because the XP firewall may not have defined port ranges, they must be defined one by one.  It looks like Windows Vista or 7 would be much easier because the firewall has got a re vamp of advanced features.

  Does anyone have a suggestion on how to realize this "allow all", deny some' strategy?  I know it's a strange use of the Windows Firewall, so let's please jump in front of a 'why would you do this incredibly stupid thing?"messages.

  Also, if it was the wrong forum (or website) to post on for this kind of question, I'd appreciate a recommendation of a more appropriate forum.

  Hello

  See the steps in the following article.

  How to manually open ports in Internet Connection Firewall in Windows XP?

  http://support.Microsoft.com/kb/308127

• launch of checkers problems: error: trying to re-launch your game. If the problem persists, it may be network with the server problems or a problem with the configuration of your firewall.

  Windows Vista can not launch problem of checkers: try to re-launch your game. If the problem persists, it may be network with the server problems or a problem with the configuration of your firewall. Please check your firewall settings by visiting the Open Ports FAQ.

  Original title: launch of the problems of checkers:

  Hello

  If you have not yet tried to disable the antivirus/firewall software, then try the following steps to disable them.

  Disable the anti-virus software: http://windows.microsoft.com/en-US/windows-vista/Disable-antivirus-software

  Enable or disable Windows Firewall: http://windows.microsoft.com/en-US/windows-vista/Turn-Windows-Firewall-on-or-off

  IMPORTANT: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks

• How to configure the Windows Vista Firewall default

  How can I configure the default windows firewall

  Hello

  If you use a 3rd part firewall uninstall it

  or if you are using an internet security suite that includes a firewall, disable/turn off the firewall

  then that;

  1. Open Windows Firewall by clicking on the button start , clicking Control Panel, clicking Security and then click Windows Firewall.

  2. Click turn on or off Windows Firewall. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  3. Click on (recommended) and then click OK

  and you should have only ONE firewall running

  more than ONE firewall running can cause blockages of the system, etc.

• State of the Muse/Menu text change on a manual configuration widget

  I don't remember how to change States on the text inside a menu widget. I manually configured the widget. I set up the links and they work properly but I don't have the ability to change the "Page: States ' and I can't seem to give me the option. I know I must be missing something.

  Try to select the menu item and then changes state, while the selection you can see the name of selected content in the top Ribbon within the Muse.

  Thank you

  Sanjit

• Try changing the settings of Vista firewall, but the configuration of the firewall Panel does not respond.

  I'm trying to access the port through the Windows Vista firewall.  When I open the firewall Panel and try to change the settings. The hourglass disappears and will not show the screen for changes.  So you can not close the firewall Panel.  Only way to get rid of it is to use the Task Manager and end task.  Any ideas?

  Hi wolfpackertom,

  Present on the computer some third party software may hinder the process.

  I suggest you try the following steps:

  The computer in the boot and a test

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Important: n ' forget not the computer to start normal follow step 7 in the link.

  Note: It is not recommended to fork or change options of windows firewall. Turning off Windows Firewall may make your computer (and your network, if you have one) more vulnerable to damage from hackers and malicious software (such as worms).

  He may want to know:

  Understanding - Windows Firewall settings

  http://Windows.Microsoft.com/en-us/Windows-Vista/Understanding-Windows-Firewall-settings

  What are the risks of allowing programs through a firewall?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-risks-of-allowing-programs-through-a-firewall

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• IPSec woes - problems after the installation of firewall between IPSec endpoints

  Hi all

  I recently had to install some pix from our internet router to some internal routers in a branch. A small preview:

  router Internet <-->PIX pair FO <-NAT->routers <-->Switch Fabric

  Basically, internal routers used to have interfaces with IPs turned to the audience of our external block. I had 2 tunnels GRE IPSec running on one of them and had users who log in to the House through 1721 s. Since we have very little space, I had public address the PIX redirect internal routers and go from there.

  So, here's where I am--my tunnels show top/towards the top, but I can't talk about anything that either internally sent by routers. All this worked * prior * me having to redirect internal routers to get the firewall in. I'll post all three configs (firewall, router, router internal) to cleaned formats such as text attachments. Note, also, that I left the pix traffic large shipping open until I can solve this problem. I'll reapply my more restrictive ACL when this is fixed.

  Just as a point of reference:

  200.200.200.200 - static IP router (by ISP)

  100.100.100.100 - public ip address who * was * on our external interface of our internal router, which is now on the pix as a static to the new ip address of the router.

  172.18.201.0/24--Le internal network, I created to re - treat routers to be originally the inside interface of the pix

  Example of House is the remote router of 1721, the Interior router example is the internal router and firewall example is our pix 525 just installed.

  I would like to know if there is more I should include...

  Thanks in advance!

  -Tim

  The statement of the route on the pix will require the subnet mask:

  Route inside 100.100.100.100 255.255.255.255 172.18.201.4

  After you change the static method, remember to do a clear xlate on the pix: clear xlate local 172.18.201.4

  You don't need to assign the card encryption at int of closure. If you do, these are in global configuration on the router mode:

  card crypto mapname-address loobackx, where x is the number of loopback, and mapname is the name of your crypto card (homevpn, I think it was). If the local address is not the right option, simply enter the card encryption? to invite the global configuration and you should see text referring to the allocation of an IP as source for traffic using ipsec.

  Notes:

  1. on the router tunnel interface will use the same loopback interface as its source too. With the card encryption applied to the actual physical interface routing if you do not have to create maps of route to route to the closure to apply ipsec processing.

  This should take care of the GRE and IPSec traffic. Is there any other traffic should I consider?

  Take care to archive the current configs on the internal router and pix before you make these changes to restore more easily to the case where things go wrong.

• Can not change the configuration extreme airport

  Hello everyone, the community can maybe help me.

  I am a long-time Apple guy and can usually solve my own problems, but this one left me speechless. I have an Airport Extreme ages of less than 1 year. I set up OK and used for the last year. Now, I want to change the configuration. Specifically I add a port to the front, but I also had this problem, try to change the MAC address access lists, changing the wireless channel, allowing access as a guest, and probably any other change in config I try.

  Anyway, once I made the change, not restarting airport but then it fails to return to the top. The yellow light comes on and sometimes the utility Airport told me that he was unable to update the config. In this State I have to pull the plug to restart and once I did, the airport is back re-run without the changes I had made.

  It doesn't matter if I use the Airport 6.3.6 on El Capitan utility or Airport utility on iOS 9.2. The result is always the same. No change, fails to return to the top.

  I did a soft reset a hard reset and a factory reset. I've reconfigured from scratch (several times) and still can't seem to take a successful configuration change. I'm at the end of the ideas. I plan to return it because it's the year is February 2, but I don't want to go through the hassle if I can fix it myself or if it is a known problem that will not change with a change of equipment.

  In any case, here is specific information on the version by any chance, anyone else had this problem or knows a fix:

  Airport Extreme 802.11ac (ME918LL/A)

  Mac OS X 10.11.2

  Airport Utility 6.3.6

  iOS 9.2

  The actual configuration is crucial here.

  We need to know what is the brand and model of the modem?

  Some cable modems are at the origin of the terrible problems... especially the SB series cable modem.

  We should also see some screenshots of your configuration... Summary tab and network...

  We can work from there.

• Saving the State of the application to resume later

  I have an application that runs a few pumps and saves about 40 items (from two typedeffed different clusters) every few minutes. The rate of pump are determined by about 10 of these elements. I want to add features to get the application and empty the State of these poles into something like a spreadsheet and later all these values that have been set up. Theres also a graphic wave form which I like to keep the data, as well as some front panel States of objects (buttons are disabled etc.)

  How did you guys would handle this? I tried to use somehting like a variant of flatten it to a string, but it is riddled with errors.

  ijustlovemath wrote:

  I was just looking for other reviews, I usually find a lot of them on this forum! I will certainly find in config files and weigh the benefits. Thank you!

  It's mostly a question of readable how you want the files are located.  If you want to read clearly the information contained in a text editor, go with the configuration file.  If you want something a bit dark, but still a little readable, go with XML.  If you don't want users to be able to read this thing at all, just save a binary file which will be faster and probably smaller.

• Can save the configuration when running VI, but not file not when running EXE

  Hello

  I have attached a file zip containing a LabVIEW project as well as a built EXE.

  The program will load up the numerical value of the file config in both cases, but it will only write the configuration file when it is executed as a VI, not as an executable file. If I don't use the computer of JKI State, I do not think I see this problem, so I think it's the order in which the program quits? I tried to disable the Panel before closing, but that did not always help.

  Reading configuration file is made in the case of "Data - initialize" and the config file for writing in the case of 'Cleaning up' -.

  It seems that the difference between the run-time and development environment behavior is the Close event of front panel. It's in Dev mode, you do not go to the front > close State, but you don't have at run time. Try to run your cleanup command before the command close to see if that fixes it. If you close the front panel, the values could be recovered, VI OpenG has not all the values to get more because they have left the memory.

  If the Panel should be closed more quickly, but you need to hide the front panel without the closing, you can use the FP. Open invoke node with a contribution of the State of "hidden". This will hide the front panel while keeping open and then the Panel will always close end when your application terminates.

• DirectSound Init failed? __Failed to get the Configuration of the speakers?

  I have redownloaded Flyff recently on my computer and when I run the program two pop ups saying:

  DirectSound Init failed
  Failed to get the Configuration of the speakers

  I have redownloaded Direct Sound / DirectSDK

  but he still appears and speaker configuration?

  I don't know what it is.

  But after that strays and I click ok at the same time need me the sign in the screen of the user.  Everything is slowed down a lot, but at least maybe 30 seconds for the text is displayed.

  Then after that it takes forever to get on and as soon as I did, nothing is moving.

  The internet is fine, so there must be something with the computer.  But what?

  Can someone help me please?

  Hello

  ·                    What version of Windows is installed on your computer?

  If you use Windows 7, there is no information if it is compatible with Windows 7. The money given the link provides the same information.

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/details.aspx?type=software&p=Flyff&v=Gala-NET%2c%20Inc.&UID=&l=en&pf=0&PI=0&s=Flyff&OS=64-bit

  You try to run the program in compatibility mode and check if that helps. Follow the link given below to run the troubleshooter for compatibility.

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  If you do not use Windows 7, you can perform a system restore and try to reinstall the game. Before reinstalling the game, set up your computer in a clean boot state, then continue to check if there is no conflict with the installation of the touch pack software while the installation process. To set up its own start-up follow the link below.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Once you have finished installing, follow step 7 article to start on normal startup.

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• location of the third-party firewall

  Hi Hello, I can't find exactly how to disable third-party firewalls on my computer.my PC was windows vista.can u tell me exactly where I can find it? because I tried a lot again I can't find it.thanks a lot

  [S] Firewall were installed, Marita? You can disable firewall 3rd part by Clean Boot Vista.
  How to troubleshoot a problem by performing a clean boot in Windows Vista

  You can change to address Microsoft Knowledge Base Article above in Spanish by clicking on the link change alongside the United States in the upper right corner of the browser window.

  Como service fallas a problema realizando una bota limpio en Windows Vista

  Haga ' Paso 1: realice UN fair limpio '

  Pipette por favor traduccion pobre. Traduccion take fue aqui.

  MowGreen MVP Data Center Management - update of safety Consumer Services

• Windows XP, why she is frozen in the configuration?

  downloaded updates. 3/3 full. the configuration. 0 0 full. rotating laptop market by itself. SINCE THE NIGHT LAST. How is it? tried to start it in safe mode. updates always takes over and stops and starts up the laptop. Why is - that it is frozen in configuration? Help.

  Hello

  1. the updates are facing this problem with?

  2. do you have service pack 3 installed on the computer?

  This problem may occur due to the interruption of Non MS & software services that run as AV, firewall.

  Please follow the links below to solve the problem. Execute the method 1 and 2 If you are unable to boot to the desktop.

  Method 1

  How do I recover from a corrupted registry that prevents Windows XP startup

  http://support.Microsoft.com/kb/307545

  Method 2

  Repair install of Windows XP by starting your computer from the Windows XP CD

  Note: If Windows XP was preinstalled on your computer, you may need the installation CD to reinstall. Contact the manufacturer of your computer to make sure that you have the CD for a repair installation.

  To reinstall Windows XP by starting your computer from the Windows XP CD, follow these steps:

  a. Insert the Windows XP CD in your computer's DVD or CD drive, and then restart your computer.

  b. When you receive the message "Press any key to boot from CD" on the screen, press a key to start your computer from the Windows XP CD.

  c. the following message on the Welcome to Setup screen is displayed:

  This part of the Setup program prepares Microsoft Windows XP to your computer: to set up Windows XP now, press ENTER.

  To repair an installation of Windows XP using the Recovery Console, press R.

  To quit Setup without installing Windows XP, press F3.

  d. press ENTER to set up Windows XP.

  e. on the Windows XP Licensing Agreement screen, press F8 to accept the license agreement.

  f. make sure that your current installation of Windows XP is selected in the box and then press R to repair Windows XP.

  g. follow the instructions that appear on the screen to reinstall Windows XP.

  After repairing Windows XP, you may have to reactivate your copy of Windows XP.

  Method 3

  I suggest you perform a scan of disk checking on the hard disk to check for any errors with it.

  How to perform disk error checking in Windows XP

  http://support.Microsoft.com/kb/315265

  Important: When running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area so all available data on this risk to be lost

  I hope this helps.

• Windows cannot display the xp sp3 firewall settings

  I tried and did not work start > run regsvr32 hnetcfg.dll [Enter] cannot find module I also tried sharedaccess.reg which doesn't work anymore

  If that's what you get:

  "Due to a problem not identified, windows cannot display windows firewall settings"

  Try this:

  To resolve this problem, two DLLs must be re-registered:

  First: click Start-> run, and then type

  regsvr32 c:\windows\system32\atl.dll
  and click OK

  Second:
  regsvr32 c:\windows\system32\hnetcfg.dll
  and click OK

  This should enable the display and the configuration of the XPfirewall settings.

  The solution above was taken from: [http://www.techspot.com/vb/topic18437.html]

• Network Assistant unable to finish the configuration of network domestic

  I'm trying to set up a network using the wizard, whenever I try to use the created dsc (Firewall window files are corrupt and cannot reset) I use Win XP on all computers. Firewall off

  There is no need to use the created disc.  Run the Configuration Wizard from the network on each computer by clicking on its icon in Start > all programs > Accessories > Communications . Boulder computer Maven
  Most Microsoft Valuable Professional