State of the HEART link down
Hello
When I configured the service to a blade profile and then deploy ESXi, it works correctly for a while so I found the following error 'is high HEAT 716 link state down' like in the seal and the IP of the server management pings also IP ESXi is who responded during the error
I did the same thing to another Blade but no problem
Hi Amr
I see the following questions
-If the strategy of global connection is 2, this means that min 2 links must be to the top chassis discovery will fail on this fabric and do not bring up the remaining link. Please change the global default value until 1 link!
-In your SP, you selected the "flag of failover of hardware; Please delete for both interfaces veth. Best practice is to leave vswitch handful of failover, UCS not!
-is the IP pool used for KVM on the same subnet / vlan as the out-of-band of the FI and VIP management address
Walter.
Tags: Cisco DataCenter
Similar Questions
-
Hi all
my instance of database shows down in OEM 12 c but in fact the database is running and status of the listener is unknown. What steps should I take to make the database appear?
FYI,.
The error is:
The current state of the target is down. (I checked events tab in the incident handler here, it is showing error as "inaccessible agent (reason = unable to connect to the agent to https://sunshine.mad:3872/emd/main / [connection refused]).") host is accessible.
A week before I made switch to digital, the basics of data, is that this is the reason why it shows this error? do we need to change any configuration after switching to the databases on OEM 12 c. at this point time of the database instance shows down and the listener to the top but suddenly the database and listener went wrong.
Please help me, give your suggestions in this regard.
Verify that the agent is in place and suggested downloading like Antonio. For the target of the database, the home page, go to the (Oracle database > Configuration target >) Configuration of the analysis page, check the monitoring parameters are correct and do a test connection. You can check the parameters of surveillance for the target of the listener as well.
Kind regards
-Loc
-
States of the button (up/down/over) image does not work properly.
The pictures below show the button before and after flying. I work in Captivate 9 - responsive project
Why pointed State does not automatically the same size as the 'low' and 'up' State?
How can I fix?
You can check the exact version number? There was a fix published, which gives the 8.0.0.230 version. That the problem has been solved with the fix:
Hot fix | Adobe Captivate questions 9
Why an image button and not a form button?
-
Hello, I'm trying to understand why I am unable to get my status as a link on my switches for ports 1/xg1 & 2/xg2. I have swapped the cables but still the same LINK down. TX1-CORE-SW-STK01 #show stack-port configured running battery battery link link Unit Interface Mode status Mode speed (Gbps)---1 xg1 battery battery Link Down 12 1 xg2 battery battery Link Up 12 1 xg3 Ethernet Ethernet Link Down unknown 1 xg4 Ethernet Ethernet Link Down unknown 2 xg1 battery battery Link Up 12 2 xg2 battery battery Link Down 12 2 xg3 Ethernet Ethernet Link Down unknown 2 xg4 Ethernet Ethernet Link Down unknown - I also tried to re add the battery but still no go... TX1-CORE-SW-STK01 #configurer TX1-CORE-SW-STK01 (config) #stack TX1-CORE-SW-STK01(config-stack) #stack - port 1/xg1 battery TX1-CORE-SW-STK01(config-stack) #stack - port 2/xg2 battery TX1-CORE-SW-STK01(config-stack) # TX1-CORE-SW-STK01 #copy running-config startup-config, this operation may take several minutes. Management interfaces will be unavailable during this period. Are you sure you want to save? (y/n) y stored Configuration! TX1-CORE-SW-STK01 #show stack-port 1 xg1 battery battery Link Down 12 1 xg2 battery battery Link Up 12 1 xg3 Ethernet Ethernet Link Down unknown 1 xg4 Ethernet Ethernet Link Down unknown 2 xg1 battery battery Link Up 12 2 xg2 battery battery Link Down 12 2 xg3 Ethernet Ethernet Link Down unknown 2 xg4 Ethernet Ethernet Link Down unknown
Hello Josh,.
It turned out that the stacking in the switch module was bad. We ordered another one traded and I got the top / upward
TX1-CORE-SW-STK01-stack-port #show
Set up running
Battery battery link link
Speed unit Interface Mode Mode status (Gb/s)
---- ---------------- ---------- ---------- ------------ ------------
1 xg1 battery battery Link Up 12
1 xg2 battery battery Link Up 12
1 Ethernet Ethernet Link Down unknown xg3
1 Ethernet Ethernet Link Down unknown xg4
xg1 2 battery battery Link Up 12
2 xg2 battery battery Link Up 12
xg3 2 Ethernet Ethernet Link Down unknown
2 Ethernet Ethernet Link Down unknown xg4
TX1-CORE-SW-STK01 #.
Thanks for your help.
-
What is the heart down link between 2 ASA?
We have 2 firewall to connect through the link dedicated and accounting a/s, my uqestion, what is heartbeat link down, airport causing the ASA 2 all active? in this case, our switch will send traffic to 2 firewall?
In normal operation if it breaks down, the situation you describe won't "our switch will send traffic to 2 firewall. However if they restart, both units becomes active. Take a look at this table:
Please rate if useful.
Concerning
Farrukh
-
the screen below the tool bar does not work, say 1 to 1.5 inches wide. below the part everything works fine. A link at the bottom works fine but if I pull the scroll bar down and take the link up then the hand does not appear. Yet once, if I pull down the link below 1.5 inches high and then hand appears on the link. In all sites what is happening. I opened the same sites thru googlechrome. There's no problem. Help, please.
The extension of the Yahoo! toolbar and the extension of Babylon have been reported because of this problem. Disable or uninstall the modules.
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
-
How can I activate Director 11? D11 I loaded on my MAC from a disc. In the activation window, the ups and downs of the choice of activation are cut. The choice of the internet is enabled, but the window says"Activation"-no link. " But I'm connected to the internet. The phone option is not available. When I call Adobe directly, phone mail says that the Director is not supported. Suggestions?
Moving to the Director
-
several objects have the same rollover both State (but the link to different pages)
Hello
I have a mac
I would like to know how I can get several images with the same States of reversal - but who appear both on several images, (but each element having its own binding property applied to this)?
See image below: I want the two box 'A' of pop with the same State of turning even if I'm hovering on one of the boxes. But I want that each of the boxes to post a link to different pages of my site.
Ive tried to group the images and moving them to their own layer, but the bearings are not "and" associate on several objects
Help!
Thank you
It is not, but you don't need that to get the behavior you described. A1, a trigger will States and the hyperlink you want. On rolling, it will show its rollover State and show its target container that will be directly on top of A2. It will look like a rollover for A2 State. Repeat for A2, B1 and B2 and I think get you the behavior you described. It is simply a different way of approaching the problem (what happens to adapt the tools available in Muse).
-
Link to an object implimented in a State of the object
I have a question about Indesign CC. We are currently working on a new DSP and we want to link to a picture in an Objetstate. It is not a problem to access the page with ' navto: / / < document > #3 "but I can't show the image I want to show it because it is in a State of the object. According to the page were I made I want to show different images.
This means that I need a link that can go to another page (not), but after that to a specific image in the State of the object.
Is it possible to do this?
I am unsing Indesign CC on a Win8 PC and we want to publish with Adobe content viewer.
Transferred to DPS forum.
You cannot link to a specific State of an MSO from another page.
-
Preserve the default state and the link using cookies
Hello
I don't know where to post this with the re-design of this forum; It has been a while so please forgive me if this is in the wrong g spot.
I have a very basic link, wrapped in a UL tag.
I use JQuery to give links a color when they are clicked by performing a function Add/Remove class, the status of the connection is more preserved by cookies so if a user returns to a page; It shows which tab they were viewing.
The problem is; It is a single page and I want to set a default link or tab; say one. I don't know how to do this.
That's what I'm looking for to accomplished:
- A user accesses the page and the first link is red (default)
- If the user clicks another link that the link is active and the first link loses its default status
- When the user returns the first link is nolonger by default, that's all that bind the selected user on first visit; This is because this link was Micaela using cookies.
- The first link will ONLY maintain the State by default, if the user deletes his cookies or visits to the page for the first time.
Here's a piece of JQuery, I used to maintain the selected state:
{$(document) .ready (function ()}
var idActive = $.cookie ('cookieActive');
If {(idActive)
$('#'_+_idActive).addClass ('activeLink');
}
$('_ul_li_a').click (function () {}
ID var = $(this) .attr ('id');
$("ul_li_a").removeClass ("activeLink");
$(this) .addClass ("activeLink");
$('cookieActive', id) .cookie.
$.cookie('cookieactive', id, {expires: 10000});
});
});
I guess your jQuery works the way you want, and the only problem is how to define the default value.
In this case, give your default link an ID, such as "default". Then add an else clause of the conditional statement in your jQuery:
If {(idActive)
$('#'_+_idActive).addClass ('activeLink');
} else {}
$('#default').addClass ('activeLink');
}
-
Selecting correct state in the drop-down list.
Here is my delima. I have a form that gets repopulate when users come back to update their contact information. Name, address, etc. of the State. What I am having a problem with performs their State to be selected from a drop-down list. For example, if I'm from Ohio, so I want Ohio selected in the drop-down list. I don't want the user to have to select again the State if the information has not changed. Here's an example of how it is formatted.
< select tabIndex = "5" name = "State" >
< option value = "" selected = "selected" > < / option > "
< option value = 'AL' > Alabama < / option >
< option value = "AK" > Alaska < / option >
< option value = "AZ" > Arizona < / option >
< option value = "AR" > Arkansas < / option >
< option value = "CA" > California < / option >
< option value = "CO" > Colorado < / option >
Of course, the two-letter abbreviation is written and retrieved from the database.
Everyone works with this before?
Any help/information is appreciated.
BrianHere's how I made this...
Top of the page put
Then, when comes the time to put the list do that...
I hope this helps.
-
How to create the link between the two drop-down lists
Hi all
I've created a form in which there are two drop-down lists.
Let's say a drop-down list contains three elements A, B, C
and another drop-down list contains three elements, Apple, banana and cherry.
So, my request is how to create a relationship between these two drop-down lists, so that if I choose 'A' in the 1st drop-down list, Apple will be selected automatically in the 2nd drop-down list.
Thank you
Stéphane
Hi Scott,.
Niall is great. You can also use a hidden field to update the second drop-down list value.
The first drop-down list change event script.
Select var = xfa.event.change;
var Items = List1.resolveNode("#items[0]").nodes;
for (var i = 0; i)
{
if(Select == items.) Item (i) .value)
{
break;
}
}If (List1.Length > 1)
{
var Items_List2 = SecondDropdownlist.resolveNode("#items[0]").nodes;
HiddenTextField.rawValue = Items_List2.item (i) .value;
SecondDropdownlist.rawValue = HiddenTextField.rawValue;}
Thank you
Sidonie.
-
States of the changes by using the drop-down list box
I have created a form with payment options in Adobe Flex. There will be 2 options of payment, cash and credit card. When a user selects an option it must fill in a few details. I created different States for the option of credit and card, which will appear as and when the option is selected. I'm not able to get the change to the State when an option is selected. Please help me in this regard.Try this:
public function paymentState (): void
{
If (payment.selectedItem.label == 'Cash') {}
currentState = "CashState";
}
Else if (payment.selectedItem.label == 'Credit Card') {}
currentState = "CreditState";
}
Else if (payment.selectedItem.label == "Chèque") {}
currentState = "ChequeState";
}
} -
660 x Schematic of the low resistance of the menu drop-down
The 660 x data sheet mentions that the State of market has an entry (high Z) with low pull-down, but I can't find a diagram with this low resistance value of the menu drop down.
I want to measure a clock signal on my DUT without loading or distort the signal, so I intend to use a buffer. I am concerned about the current required drive to overcome unrolling integrated resistors and the requirements of threshold as a result of my meter PXI-6608.
If anyone has a link to the recommended buffers, levers of level or an article in the knowledge base with an example circuit, it would be much appreciated!
http://www.NI.com/PDF/manuals/372141b.PDF
It was working fine. I look forward to adding to my next PCB ITA.
-
Cisco 6248 FI to Brocade 6510 SAN switch shows Link Down
Hi all
His new installation of Cisco UCS with Brocade SAN switch 6510.
I followed the Cisco UCS to Brocade connectivity Guide.
Even if the switch side so FI link is not coming. No lights are glowing.
When I checked the switchshow @Brocade 6510, ports are No_Light status display. Where in other ports, it indicates the number of my storage device WWN.
At the END, when I click on ports CF, its projection on all State - link down.
Any who are facing this problem. ?
Am I missing some configuration steps?
Kind regards
Praveen
This should be a trivial or a very complex problem. I'd rather commonplace.
Brocade is a CF 16 G switch; up to 8 G negotiation seems to work (storage subsystem).
Maybe you could try to set the speed on the Brocade 8G port fix!
Or something with the cables is wrong? Send / receive Crusaders?
Are shortwave of the MMF SFP? cables connection as well?
Connect cable from port for example. 31-33, 32 to 34 and see if it works?
Maybe you are looking for
-
Administrator password forgotten, how to get to retrieve or change?
I am the administrator of my daughters computer. Unfortunately I don't remember the password to sign his computer. I don't have a reset disk, and I am unable to give permission for the updates to be implemented. Can you tell me how I could go in a
-
Try to test the model of animation with Adobe Flash CS5 in Windows XP stops
I'm currently testing a model animation in Adobe Flash CS %, Windows displays an error message and stop the animation of initalising and then Windows States to close the program to check its compatibility. Nothing so haapens. I ran the compatibility
-
Hello My HP psc 2175 all-in-one suddenly started printing very very slowly. No new drivers have been installed, or any other configuration change was made, so I have no idea what could have happened. Any clue? Thnks.
-
XP log on / close the loop
A ran spybot two days ago, last thing and disconnected after resolving some issues. Everything is OK Yesterday, each user connects and gets immediately disconnected, just an overview of the background. Even in safe mode, tried last good config known
-
Anyone know how I can get this file? Thanks Norm