Link down stackable modules

Similar Questions

• Cisco 6248 FI to Brocade 6510 SAN switch shows Link Down

  Hi all

  His new installation of Cisco UCS with Brocade SAN switch 6510.

  I followed the Cisco UCS to Brocade connectivity Guide.

  Even if the switch side so FI link is not coming. No lights are glowing.

  When I checked the switchshow @Brocade 6510, ports are No_Light status display. Where in other ports, it indicates the number of my storage device WWN.

  At the END, when I click on ports CF, its projection on all State - link down.

  Any who are facing this problem. ?

  Am I missing some configuration steps?

  Kind regards

  Praveen

  This should be a trivial or a very complex problem. I'd rather commonplace.

  Brocade is a CF 16 G switch; up to 8 G negotiation seems to work (storage subsystem).

  Maybe you could try to set the speed on the Brocade 8G port fix!

  Or something with the cables is wrong? Send / receive Crusaders?

  Are shortwave of the MMF SFP? cables connection as well?

  Connect cable from port for example. 31-33, 32 to 34 and see if it works?

• How can I add Google search under "manage search engines"? I tried to find the link to the module, but cannot find anything.

  I can't find any plugin search google for firefox 4, Ask and Bing are the default.

  Install this module: https://addons.mozilla.org/en-US/firefox/addon/add-to-search-bar/

  Then right-click in any search field and choose "Add to search bar."

  Uninstall Ask.com if via modules | Because extensions which it seeks only results with paid advertisers.

  Alternatively, you can go back to Google as default search engine as follows.

  • In the address bar, type Subject: config and press ENTER.
  • In the filter at the top, type: keyword. URL
  • Double click top and delete everything in it and replace it with http://www.google.com/search?q=

  The URL to add in "keyword. URL"becomes a link in this message, right-click and choose"Copy link location"to copy it to the Windows Clipboard. Then press CTRL + V to paste. You have to type all of this saves.

  To reset your home page, follow these steps.

  • Go to the site you want to set as your home page.
  • Click on the orange button Firefox and go to Options | Options | General (Firefox 4.0.x and above).
  • Go to Tools | Options | General (The previous version of Firefox).
  • Make sure that it says in the first drop 'show my home page'.
  • Click on the button called "use current Pages' to set the home page to the one you have on the screen.

  After completing the steps above, install this add-on to prevent another search engine to change your preferences: https://addons.mozilla.org/en-US/firefox/addon/browserprotect/

• 6120 link down on mgmt0 triggers not UCS Manager failover cluster - is?

  Hello friends

  We have recently installed a cluster consisting of two 6120 UCS s configured for HA. When executing fail during test cases, we removed the network cable in mgmt0 on 6120 elementary. Immediately the cluster IP address is not responding ping (as expected) and we lost connectivity to the UCS Manager GUI (also as expected.) At one point, however, we expected the 6120 subordinate to detect that this link was down and launch a failure over the UCS. This is not moved after 20 minutes of waiting.

  My questions are the following:

  1. Is this expected behavior?
  2. If this is not the case, what should us review to ensure that failover occurs in the future?

  I know we can force a failover of the subordinate by issuing a command to the main cluster of local-mgmt but would be interested to see if it should be automatically produced on the failure of primary mgmt0 binding.

  Thank you for your time.

  Configured by default which is the expected behavior.

  You can configure management interface and failover if the management interface loses connectivity such as your test scenario.  That's what you're looking for.

  Admin - Communication Management - Management Interfaces - Management Interface tab strategy control tab.

  

  Kind regards

  Robert

• State of the HEART link down

  Hello

  When I configured the service to a blade profile and then deploy ESXi, it works correctly for a while so I found the following error 'is high HEAT 716 link state down' like in the seal and the IP of the server management pings also IP ESXi is who responded during the error

  I did the same thing to another Blade but no problem

  Hi Amr

  I see the following questions

  -If the strategy of global connection is 2, this means that min 2 links must be to the top chassis discovery will fail on this fabric and do not bring up the remaining link. Please change the global default value until 1 link!

  -In your SP, you selected the "flag of failover of hardware; Please delete for both interfaces veth. Best practice is to leave vswitch handful of failover, UCS not!

  -is the IP pool used for KVM on the same subnet / vlan as the out-of-band of the FI and VIP management address

  Walter.

• Host adapter interface 1/2/1/1 status of the link down

  Dear all,

  can any one help I have an error 'Host interface 1, 2, 1, 1 link adapter state down' and none of my network cards coming State 'up' error F0207. I'm on 2.2 (6f) and chassis as channel ports policy, set the server ports as two for each FI and they are up and running.

  Any ideas?

  Thank you

  Actually, it isn't 4094, we have another VSAN defined in the N5K and for use in case of problems, it is replaced by default and I forgot to restore. We have this problem earlier when he used the same VSAN that is defined in the N5K.

  Here is the output while he was assigned to the VSAN that is defined in N5K (1100)

  Show vfc int 709
  vfc709 is the trunking (not all VSANS upward on the trunk)
  The related interface is port-channel80
  The material is Ethernet
  Port WWN is 22:c4:8 c: 60:4f:d2:01: ff
  Port admin mode is NP, trunk mode is enabled
  State link SNMP notifications are enabled
  Port mode is PNT
  Port vsan is 1
  Trunk VSAN (authorized and active admin) (1.1100)
  Trunk VSAN (top) (1100)
  Trunk VSAN (isolated))
  VSAN trunk (boot) (1)

  You were right about the installation.

• DBAdapter link missing under Modules

  Hello
  I tried to install the application SOADEMO using SOASuite 10.1.3.1 with OAS 10.1.3.4 patch applied on top. I stuck everything by step configure Oracle SOA Suite Quick Start Guide (2.2.2).
  
  7. create a database adapter connection factory:
  Top of page JDBC resources, click on the link of the wire of Ariane OC4J:home.
  A.the OC4J: home page appears.
  Click the Applications tab.
  (b) in the table of applications, click default.
  C.the Application: default page.
  In the Modules section, click the link of DbAdapter. (But I am not able to see the link DbAdapter as shown)
  D.the resources adapter: the adapter of database page.
  
  For SOA Suite, there are two instances of OC4J installed. I could see the link for OC4J:soa but not for OC4J:home.
  Can someone help me on this.
  
  Thank you
  Jannat
  
  Published by: user771067 on March 1st, 2009 23:27

  Not quite sure, if there is a problem here, it seems you've done an advanced installation therefore you oc4j containers 2, House and oc4j_soa. Home is used for stuff of Directors as the company Manager. The SOA Suite is installed in oc4j_soa. This is why you must read around the documentation, where ever see you reference to home, acting for oc4j_soa.

  That been said you see the link to the db adapter in the oc4j_soa container?

  If not, can you tell me if you are using Vista. There is a known issue with the upgrade.

  If you want to install the DB adapter, run the following command

  java-jar deployeur admin_client.jar: oc4j:opmn://hostname:6003 / home oc4jadmin eu1-deploy - file $ORACLE_HOME\integration\esb\lib\DBAdapter.rar - deploymentName default DbAdapter-parent

  you run this from the directory $ORACLE_HOME/j2ee/bin

  you will also need to substitute at home with oc4j_soa or the container that you want installed in. Change the host name to your machine name.

  see you soon
  James

• KORG nanokontrol2 - Fader 2nd edition is linked to the modulation

  Hello

  I'm kinda new on MainStage. I'm running version 3.2.3 and nanokontrol2 helps control MainStage. Nanokontrol2 has been updated to its latest driver/software as well.

  So, I just can't understand why my volume fader 2 relates to the modulation (outside volume) without me personally of this mapping. I found a way around this with the modulation wheel disappear from my layout, but it doesn't just make sense. Also, if I increase the volume on fader 2 software (not nanokontrol2), everything is good, modulation is put in place.

  Does anyone have experience on this? Thanks for the help.

  Blessings,

  Dion

  With my NanoKontrol2, I had a software called "Korg Kontrol Editor" that allows me to see what CC # is transmitted by all faders/buttons.  Have a look at mine I see that the default 1-8 faders is 0 # CC #7 CC.  Thus, it seems that you are using the default configuration, which means that Fader2 passes #1 CC which is defined as the Modulation of the MIDI standard.

  Now, I have not Mainstage run right now so I can't tell you how to stop the Modulation CC: alert them... Maybe someone else can intervene here?

  However, you can use the editor to change the CC numbers are used, so you can replace something that is not usually used.  For example CC #102-119 are not defined in the standard I think.

• linking to toolkit modulation AM function generator

  Dear

  I am doing a project in telecom AM modulation demodulation using labview.
  I have attached, the function (such as message signal) generator and modulate Am (as a process of modulation AM) but I am facing problem wiring the function as the message signal generator in the AM modulation. I would be grateful if someone can help me that doing so. In addition, if you have an idea how to make the process of demodulation using the MT modulation toolkit I will be grateful.
  Thank you for your help

  Hi Sir... Peter,

  Thank you for your, you helped me a lot in the resolution of many problems in my project.
  I still need your help for something;

  I did the AM modulation as you fixed, and I added the demodulator block in order to recover the original signal from the message.
  In fact, I am facing two problems:
  1. in the SSB: single side band, I'm not able to recover or demodulate the square wave type.
  2. I am not able to modulate and demodulate a file audio wave.
  I would be grateful if you can help me in carrying out my project.
  Thank you

• Windows XP SP3 link down

  I had to reinstall Windows XP recently, and I need to SP3 to enable apparently as well updates because Windows Update does not just start whatever I try. However, all links provided to SP3 on https://technet.microsoft.com/en-us/windows/windows-xp-service-pack-3.aspx

  lead to error pages. If Microsoft does not host this download more and I can not get the update of Windows to start on my PC, where can I get SP3 then? Is the version of FileHippo safe and verified?

  See the response to PA Bear.

  If you must stick with Windows XP, despite the risks, use IE (only) to go here--> http://catalog.update.microsoft.com/v7/site/Search.aspx?q=xp%20service%20pack

• What is the heart down link between 2 ASA?

  We have 2 firewall to connect through the link dedicated and accounting a/s, my uqestion, what is heartbeat link down, airport causing the ASA 2 all active? in this case, our switch will send traffic to 2 firewall?

  In normal operation if it breaks down, the situation you describe won't "our switch will send traffic to 2 firewall. However if they restart, both units becomes active. Take a look at this table:

  http://www.Cisco.com/en/us/products/HW/vpndevc/ps2030/products_configuration_example09186a00807dac5f.shtml#actio

  Please rate if useful.

  Concerning

  Farrukh

• Satellite C70-C-199 - dual channel mode is not active for RAM modules

  Hello

  I recently bought a Satellite C70-C-199 laptop with 4 GB RAM and I installed a module of RAM 4 GB more.
  The module I installed is not recognized by the BIOS.

  What I tried:
  (1) replace the Rams repeatedly.
  (2) exchanging the two Rams between the two slots.
  (3) BIOS update to the latest version

  On the link down below, you will find some reports AIDA64 that contains details on the chipset and the two RAM modules.
  https://drive.Google.com/open?ID=0By...ndwZUZoV3lCMTQ

  Thank you for your help in advance.

  I found the problem. This laptop needs DDR3L. This means that the RAM modules operating at 1.35v. My 4 GB Kingston works only at 1.5V.

• Down line ADSL X 3000

  Hello

  I have ADSL router Linksys X 3000, but I have a problem with it. I have it configured correctly (based on the manual of the internet service provider), repeatedly checked, but the router always said that ADSL line is down. I also have another router from Zyxel and it works perfectly with the same yarn and configuration, so I guess that the line is very good.

  There the router log, can someone help me, why the router is not connecting, please? Thanks for any help

  PPP pilot generic version 2.4.2 79
  Deflate Compression of PPP module part 88
  PPP BSD Compression module part 84
  PPPoL2TP kernel driver, 75 V1.0
  ccp_autowan_sm_thread => starts in unconfigured mode, detection of State! 125
  -> State disconnected! 78
  xDSL G.994 training 74
  -> detection of State! 75
  -> dslWanSt = 1, ethWanSt = 0 81
  -> Training RJ11 condition! 79
  ADSL G.992 started 73
  Analysis of channel ADSL G.992 82
  DSL link down 69
  -> State of bottom-disconnected! 83
  -> detection of State! 75
  xDSL G.994 training 74
  -> Training RJ11 condition! 79
  ADSL G.992 started 73
  Analysis of channel ADSL G.992 82
  DSL link down 69
  -> State of bottom-disconnected! 83
  -> detection of State! 75
  xDSL G.994 training 74
  -> Training RJ11 condition! 79

  As another modem (zyxel) works already then I agree that the adsl line works. After you have updated the firmware, you did another reset on the gateway and reconfigure the settings? If not yet, first try another reset and reconfiguration. If it always connects after the reconfiguration, so I think it's a hardware problem.

• Stacking Module - Dell Powerconnect 6248

  Hello. I have a Dell Powerconnect 6248. This used to be a secondary switch in a stacked configuration (total of 2 switches). However, the captain then descended down we unplugged and it became the master of the battery. It is always configured in a configuration of the battery.

  My question is this: can I remove the stacking module card when the switch is on and in production?

  The reason is that I bought a new 6248 and repaired the old master as well and want to stack these two because they are both on the latest firmware. What is the best practice for this that I don't want to take down the switch by disconnecting the battery module.

  Let me know if you need more information!

  Thank you very much for any information!

  Unfortunately the stackable modules are not hot-swappable. You must turn off the appliance to remove the stacking module.

• Installed the latest upgrades and advertising-block modules are working now is no longer

  I have installed the latest updates for Firefox and every night, but now my add blocking ad - ons are blocking is no longer ads. I ran Malwarebytes and software Adware of malware detection and also do not work Hitman in safe mode and my Ghostery and the Ad Block Plus. Can someone give me any other suggestions? Should I remove Firefox and reinstall? Thank you

  Did you use the link I gave you to the homepage of Adblock?
  You can get better module support to the authors of this program.

  One thought is to save everything to remove Firefox, do a fresh install,
  then check for problems.

  Uninstall the Firefox on your computer {web link}

  Download Firefox full installation for all systems and languages {web link}

  These modules can be a great help for the backup and restoration of Firefox

  FEBE (Firefox environment Backup Extension) {web link}
  FEBE you can quickly and easily backup your
  Extensions Firefox, history, passwords and more.
  Indeed, it is more than just backup - it will actually rebuild
  your saved individually into installable as files.
  It will also make backup of the files you choose.

  OPIE {web link}
  Import/export extension preferences