Static URL in Siebel that can be protected in OAM

Similar Questions

• "I can't copy all the files to my kingston sd card, when I try to copy his shows that" remove right protection "so plsss help me get rid of this.

  "I can't copy all the files to my kingston sd card, when I try to copy his shows that" remove right protection "so plsss help me get rid of this.

  Hi ebugsasi,
   
  To remove protect him writing on a kingston Micro SD cards, locate a switch or button on the side of the micro SD adapter card. It will normally be a symbol of locking/unlocking on it. Put it to the unlocked position.
   
  This should remove the write-protection feature.
   
  Keep me updated on the status of the issue.

• I heard that microsofts antivirus protection is good enough. where can I find more information

  original title: virus protection

  I heard that microsofts antivirus protection is good enough. where can I find more information

  Hello

  Here is a link to Microsoft Security Essentials.

  http://www.Microsoft.com/security/PC-security/MSE.aspx

  I use it myself and that you have not had any problems, I rate it is excellent.

  Moreover, it's free.

  Good luck.

  Barry

• How can I remove the rest of the damaged files that Windows Resource Protection could not?

  How can I remove the rest of my corrupted files that Windows Resource Protection did not delete?  It offers no suggestions?  If he deleted some, why can't this?    I did the scan twice, but it says this... CBS. Newspaper windir/Logs/CBS/CBS.log for more details... I don't know how to access, also said the damaged drive was C / windows / System 32/config/software/log is corrupted and unreadable.  Hope that there is a way to solve this problem... Thank you

  Hello

  Try the following and see if it helps.

  I suggest you perform a disk check and check if it helps.

  See the following steps:

  a. open the computer by clicking the Start button, click computer.

  b. click the drive you want to check, and then click Properties.

  c. click on the Tools tab and then, under error-checking, click Find now.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  d. to automatically repair problems with files and folders that the scan detects, select automatically fix file system errors. Otherwise, the disk check will be a problem, but not to fix them.

  e. to carry out a thorough, check select search for and attempt recovery of bad sectors. This analysis tries to find and repair physical errors on the disk itself, and it may take much longer to complete.

  f. to check for errors file and the physical errors, select both automatically fix errors in file system and search for and attempt recovery of bad sectors.

  g. click on start.

  Note: When running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Note: Make sure also that you have disconnected all external devices except the keyboard and mouse.

  Note: If you are always faced with the question then I suggest you to upgrade on the spot and check if it helps.

  How to perform an upgrade in Place on Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2: http://support.microsoft.com/kb/2255099
  Note: Before you perform the upgrade on the spot, I would recommend you to back your files using windows backup.

• How to convert a PDF file that is password protected to a MS Word file so that I can change it?

  How to convert a PDF file that is password protected to a MS Word file so that I can change it?

  Hi smart integration

  There is no way to convert a file protected password unless you know the password.

  Contact the sender to know the password of the file.

• Pass the value modal page using static URLS

  Hi guys,.

  I have a simple page with three boxes.

  When one of the check boxes is selected, I want to draw a new page which I use as a modal page (SkillBuilders Modal plug to help).  I need to pass a value of a checkbox (P1_WTD_OPT_OUT) in the new modal page.

  I have the following in the static URL

  f? p = & APP_ID.:2: & APP_SESSION.:2:P2_WTD_ID, P2_WTD_OPT_OUT: & P1_WTD_ID, & P1_WTD_OPT_OUT. :

  where I'm moving the value of P2_WTD_OPT_OUT to P1_WTD_OPT_OUT.

  As I don't submit anything when the check box that calls the modal page is checked, how I would pass the value in the modal page?

  At the moment, if P1_WTD_OPT_OUT is enabled or not, P2_WTD_OPT_OUT is always null when modal page.

  I use apex v4.0

  Any help would be great,

  Thank you

  Here is what goes wrong:

  -page is first rendered, P8_WDT_OPT_OUT is NULL

  -the static url for the modal lov is generated. Given that the item is NULL value in the url for the P9_WDT_OPT_OUT point shall be void in this url

  -l' change event fires. The P8_WDT value is stored in session state

  -the modal opens and navigates to the static url

  End result is that the P9 indeed will be null.

  The solution to this is to not not to set the value of the item through the URL, because it will simply not work. But given that the element of P8 is located in session state, you can use the value of it to the default value of the element on P9.

  On page 8, I changed the dynamic action to not set the value of the element in the URL, and on page 9 I changed the default value of the element.

• How to make and receive an email that is password protected?

  A seller wants us to send and receive emails that are protected by Word. I don't want this option to apply to all other communications. How do I configure this?

  Assuming that your attachment is a Word document, you must protect by using Word.
  
  You can also compress the document with e.g. Winzip and protect the records.

  It's nothing that can be done with Thunderbird.

• can I protect a profile with a password?

  Different users of my PC have created 3 different profiles. These profiles can be protected by 3 different passwords (e.g. when creating a profile) in order to ensure that each user can only access its own profile, but not the other 2?

  akribius

  You can use the word of past master + add-on ([ https://addons.mozilla.org/firefox/addon/master-password]) to make the user to enter a password before the start of Firefox.

  Although primarily intended to improve the Firefox master password options, you can configure the key word of past + Add on to always request a password at startup of Firefox and if either cancelled or not entered correctly after a number of attempts, that he will leave the Firefox.

  This protection is pretty basic, that it keeps someone to copy data files from the protected profile in a new profile folder, allowing them access to the content of the protected profile.

• How can I protect a file with a password?

  Original title: password

  Please, tell me how can I protect a file with password, folder, a CD, or a DVD. Is there a suitable and reliable and verified software? Please, give me web comments on sites where to find necessary software. I need in order if my CD or DVD discs will be stolen by a stranger or to reach people I did not trust. I need only for private use. You see, I don't have an iron safely to the place I live. I hope that you will understand me. Thank you in advance. John

  Hello, Tommy Stanley. I realized from your questions that you can imagine that I will earn money selling the CD protected by word or DVD discs telling buyers the password. No, I'm not a sales man. Only for me on the extreme case, that my disks will be stolen or to reach people, I do not trust. I guess that to set a password that is easier then encrypt disks. But I wonder to know how to encrypt CD or DVD discs and that means encrypted drive. Through what she may be to read? Please, I explain my situation (I live in time with people that I don't have confidence). Please, give me some reliable advice concerning my question. Now, for me it very seriously. I hope you understood me. Thank you in advance, Shenan Stanley.

  I think you read things in my simple questions that weren't there.  I asked because if it is stored on a single computer/use on one computer by one person - the solutions are simpler and more readily available than if you plan to send this information to someone else so that they treat.

  I recommend you read this:
  http://www.computerhope.com/issues/ch000705.htm

  If this isn't a shared computer... (It is yours, you can use only.)

  I suggest that you see if you can lock the computer closed (with a physical cable/lock).  You add a password to your system SETUP or BIOS so that no one can change the settings of operating system and maybe even a STARTUP password so it can not even start without enter you a password.  Also change the BIOS settings so that it will only start from the hard drive installed in the machine.  With the Setup/BIOS password, you can change back to something later.

  AxCrypt and TrueCrypt are free and good encryption tools.

  Regarding the CD/DVD - you don't encrypt the media - you encrypt everything you would write for them and you will probably need to copy off the power and check that the files on them are not read-only before you can decrypt in most cases.

  By the way - physical security outweighs almost all other types of security.  Which means you need to physically secure the computer before you bothder same thing with another.  Locking the computer case closed and adding the password after changing startup opportunities, I would consider good physical security in your case.

• The password can I protect an external hard drive?

  • I have an external drive that is password protected, no matter what the computer is connected.  Backup of data which are confidential.

  Hello

  Thank you for using the Microsoft Windows Vista Forums.

  You can use your favorite search engine to download and install third party software password protect external hard drive.

  You can see the link below for more information on Bit locker in Windows 7.

  What is BitLocker To Go reader application?

  http://Windows.Microsoft.com/en-us/Windows7/what-is-the-BitLocker-to-go-reader

  Please post back and let us know if it helped to solve your problem.

  Kind regards

  KarthiK TP

• Content can be protected Z5

  Hi my name is Steve. I recently switched from an iPhone to a Sony Xperia Z5. I always get use the phone, but there is a particular problem that I can't solve. I'm taking a screenshot of a page in an application, but I get a message saying "content that may be protected or the memory is full. I know that memory is not complete because I only just got the phone. I can take screenshots of other pages.
  I use to be able to take screenshots of this page on my iPhone, but for some reason that I can't get on my Sony. Any help would be much appreciated. Thanks in advance.

  Hi, I got a response from Bet365 and this is what they were saying;

  Thank you for your email regarding the ability to take screenshots.

  If you use an Andriod mobile or tablet, you may not be able to take screenshots of the bet365 page longer. This is due to an update which has been implemented by Android and their platforms.

  I tried to take a screenshot of an another skybet betting slip and that works very well. So for the moment, it seems that it is just this app.

  Thanks again for your help

• Is there anyway I can "UN-protect" a CD?

  When I put a CD on my computer, it gave me an option to 'protect' or ' not ' the contents of the disc. I didn't know what that meant so I clicked on "protect". Now I can't use the music on Windows Movie Maker or other programs. I was wondering if there was a way to "UN-protect" music. Help, please!

  If you have used WMP ripping music to WMA, so unfortunately not. You will need to re-rip music. Before extraction again, please make sure that the copy protect music is disabled in the Options of WMP - music Rip.

• How can I protect my folder on the external drive?

  I don't see a clear answer to this question online. I want to protect a folder on my external hard drive which has some personal data. I have to protect the whole disc, just a folder + subfolders. I see that the 3rd party software programs box password protect a folder, but when uninstall you them you may lose the ability to access again if you aren't careful, and they aren't full evidence for someone who is computer savvy and I really want to see this data.

  I watched a video on here EFS: EFS but it is a senseless video and provided no help to understand how it works. I created a folder to the test and does what it says. The name of the folder turned green so I know he did something, and it prompted me to create a key with password and save it, which I did. However, I can always freely open that folder and see the content, so anyone who has access to my computer is able to view that as easily as any other folder. Don't ask a key or password or anything like that. No sense for me...

  I need to a single folder (and subfolders) on my drive to be protected, encrypted, whether, for other people cannot access it even if they steal my external drive and connect it to another computer. I don't understand why it is so hard to find something that can do this and how to do it.

  If you enable encryption by file (or folder) with this option, which cannot be done because it is encrypted specifically with a hash of your account.  It also means that even if a system admin force - reset your password, the hash is invalidated and files that have been encrypted in this way will be unavailable.

  

• Error database that can be updated windows detected 0x8007000D - not been fixed in Windows 8.

  Original title: slow startup and commissioning, also blocks windows 8

  My computer began to take 10 minutes to start and run. then hangs every now and again when I use it.

  I had problems installing an update and I thought that was the problem, so I followed the instructions and installed the update (KB2855336) on a clean restart. When I put the settings back to normal reboot I see the update succeeded, but the computer is still a good 10 minutes to restart.

  I tried to do a repair, but this is notauto-start.

  I tried to run a sfc/scannow and that froze the verification step 100%, I have waited a long time, checked in the Task Manager and saw that he was inactive and if you click end task.

  My Task Manager shows 99% or 100% use of the disk.

  I tried to do a system restore to a point in mid-July and which failed, error 0x80071a90 code.

  I followed the advice of someone to uninstall the update and restart twice, but the problem persists.

  What can I do to fix this? I use my laptop to work and so I need this problem as soon as possible.

  I just tried in safe mode and also it took forever to start and run. I tried different jumpers in safemode, maintenance of the system not found no problem, windows update however found two:

  Error in database that can be updated windows detected 0x8007000D - not fixed

  Windows Update, the components must be repaired to no fixed

  Help, please!

  Thank you

  Hello

  This problem is usually caused by Windows Update corrupted downloads or installations. However, virus infections are also known to cause this problem. Before scanning for viruses, please try these troubleshooting steps and check whether the problem is resolved:

  Method 1: reset the Windows Update components and check if the error persists:

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058/en-us

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  Method 2: use Deployment Image Servicing and Management to fix Windows Update errors.

  To do this, follow these steps:

  a. press the Windows key + C and type cmd in the Search box.

  b. right-click on command prompt and select run as administrator.

  c. type these commands and press enter after each:

  DISM.exe / Online/Cleanup-image /Scanhealth

  DISM.exe / Online/Cleanup-image /Restorehealth

  d. close the command prompt, and then run Windows Update again.

  Please get back to us with the State of the question.

• Just installed CD player. Now I can't print pdf files without disabling Protected Mode.  Anyway to adjust/difficulty so I can print protected-mode?

  Just installed CD player. Now I can't print pdf files without disabling Protected Mode.  Anyway to adjust/difficulty so I can print protected-mode?

  Protected mode can be "a very important part of their security features", but what's the point if the product does not work?

  If has been like that since the introduction of Safe_mode in drive X.  Reader, crashes, hangs, cale, cannot print and various other symptoms.

  I recommended to disable Safe_mode for a very long time, and even Adobe support staff do often the same here in the forum.

  There is absolutely no advantage whatsoever to keep protected Mode enabled.  (Although I personally have never had no problems [with protected Mode on] on any of my Windows systems.)