With the external disc to open

Similar Questions

• Satellite M30X-129 loses connectivity with the external USB device

  I have a problem with my laptop that has regularly been do worse and I can handle is no longer!

  Whenever I work with external devices via USB ports (all kinds of devices but my external hard drive Smartdisk CrossFire and my iPod in particular), after a certain period of time (sometimes minutes, sometimes hours) the laptop loses connectivity with the device.

  If happens to be listening to the music, download photos from a camera or laptop computer for the ' net or sync of the iPod, the connection is cut off, turning off the device and I have to start all over again!

  I'm almost at the point of launch of the laptop by the window, so any help is most welcome.
  Thank you
  Abderrahman

  Hello

  This happens also with the external USB mouse?
  This occurs if the power adapter is plugged or only if the laptop running on battery?

  In-hubs properties > Device Manager USB root-> power management
  You will find the option called allow the computer to turn off this device to save power.

  I would recommend the brand and disable this option.

  Maybe it helps.

  By the way; When do you update the operating system? I think that it s there long time, perhaps some system files or registry entries are corrupted or a 3rd party application affect the USB functionality?

• HP ENVY 17 t-j000 Quad Edition: do I need Internet to Factory Reset my PC with the HP discs

  Do I need Internet to do the factory reset on my PC with the HP discs?

  Try typing esc you power up and get an option to enter setup (BIOS) which is F10 or just start typing F10 as you power up. You will see a good-looking menu thing on the BACK. Change the date and then click on save changes that you are leaving.

• Error - there is a problem with the external Setup program and it must be closed when you try to install windows updates

  Original title: How can I fix external MSI?

  When I try to download the updates, the error message says there is a problem with the external Setup program and it must be closed.  Updates will not be installed.  Anyone know how to solve this problem...?

  Hi John,.

  ·         You are able to install other applications on the computer?

  It seems to be a problem with the corruption of the .net framework. I suggest trying to repair the .net framework on the computer and see if you can install the updates.

  http://support.Microsoft.com/kb/923100

  Hope the helps of information.

• All my files with the .lnk extension will open with Windows Internet Exploer and I can't change them.

  All my files with the .lnk extension will open with Windows Internet Exploer and I can't change them.
  It's everything that happens anywhere, and I can't change it please help.

  This tutorial should help guide you through this process: http://www.mydigitallife.info/2008/06/20/how-to-edit-or-change-file-type-or-extension-associations-default-programs-in-windows-vista/

  It's a fairly simple process.

• Frequently, Adobe Edge animate the files with the *.an extension will open with the menu completely empty elements.

  Frequently, Adobe Edge animate the files with the *.an extension will open with the menu completely empty elements.

  The HTML file remains in the folder, it works, but it is impossible to repeat the file Edge animate again. What can I do to restore the file or to prevent other cases like this?

  Above all, why do?

  Maybe because some elements such as an image or a code has been changed while the file *.an was opened while the change has been made?

  Thank you very much

  Paulo Tasca

  NextPage

  Sao Paulo, Brazil

  See my tutorial can help:

  How to fix corrupted files EA - Tutorial #3

• Having a problem with the Muse crashing when opening a Web site I designed in Muse.

  Having a problem with the Muse crashing when opening a Web site I designed in Muse. You need to be able to access this site in order to update for my clients.

  [LASP/updateCaches] TypeError: Error #1009: cannot access a property or method of a null object reference.

  All adventures Rafting | Wenatchee Whitewater Rafting trips - two hours East of Seattle

  Could you please send us the .muse file to [email protected] as well as a link to this topic? If the file is larger than 20 MB, you can use a service like Adobe SendNow, Dropbox, WeTransfer, etc.. Thank you.

• Tecra A10 - 1LL - connection with the external monitor

  Hello

  I have a problem with my laptop Tecra A10.

  When I connect to an external monitor to the laptop I have to manually switch the screens because external shows nothing. When I disconnect the monitor I have to pass the screens manually with FN + F5 because the internal display shows nothing.

  My old laptop (Tecra A9 (PTS52E-0E702NGR)) is the poster automatically whenever I connected or disconnected an external monitor.

  Anyone has an idea why the A10 light automatically as the old notebook? Maybe it's the only spot in the preferences of the display driver that I don't see right now. :-)

  Hi SilverWizard,

  What happens if you try to switch on the external monitor using the options of display driver, or that this combination of buttons don t work?

  As wrote Al - eX you must update tools from Toshiba to get the keys FN working again. Everything can be downloaded here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  It's working now?

• Mid 2012 MacBook Pro starts only with the external hard drive

  I have a MacBook 2012 mid Pro and whenever I try to start it only shows the folder with question mark flashing. But, whenever I plug in my external hard drive, it boots. I also tried selecting the boot drive and the interns don't show, but once in the external plug-in, it shows externally as Macintosh HD. I also tried to reinstall OS X but it says I can't you this player.

  Thank you

  While in the drive external hard, that I hope has the same operating system, can you go to utilities utilities disk-file and run a repair of the internal drive and repair permissions? You could also do the same thing in starting mode of recovery-command keys R at startup. Using the recovery disk utilities. If you can't get the internal drive to show everyone, most likely the drive is bad. Then, you will need to replace it.

• Synchronization of analog and digital output with the external sample clock

  Hello

  First of all sorry for my English, I will try to explain what I want to do.

  I want my PCIe-6321 to send two custom signals (modification sawtooths) on a mirror controller. I would also like to generate output with my card at the beginning of each tooth of saw. Everything must be synchronized with an external k-clock signal of 100 kHz. The idea is that whenever the PCI receives a trigger to external clock, it sends two analog output voltages and when he received 1024 clock ticks it will also send a pic of triggering TTL. What I do is first prepare the map and after that in a loop sending and modifing the output values of the two signals and at the same time send a digital signal Boolean in each arch, so when's done it 1024 iterations of the loop I send an event to the digital port. Attached you can see.

  The problem is that I don't know how to synchronize both. Can I use the sample clock just to the analog output? I can use sample for the two outputs clock, or do I need to use the output of the meter? If don't know how to use it here.

  If I do nothing else bad/wrong, I would be grateful for feedback.

  Thanks in advance,
  Pablo

  I don't know how but I find the solution. I'm generating more than a positive value (as I was triggered maybe very fast the oscilloscope has been absent there). If I put the sample clock of digital output to use the sampling/ao/Dev1 clock that it doesn't, but if I put to use the same source as the OD (terminal where my external clock is connected), but the trigger to start the DO to be Dev1/ao/StartTrigger this works. I don't really know why, but it does.

  Thank you for your patience and your help. I put here the final code.

• Problems with the external monitor W540 connection

  Hi, maybe someone can help me. I'm trying to connect a W540 (no external dock) to an external monitor Dell.

  I tried with two monitors, but none work.

  Connected via VGA port on the side of the W540

  (1) connected monitor and clogged up the resolution of the screen on laptop (lines icons tiny, black on each side of the screen). External monitor works fine. When unplugged, it went back to the previous screen resolution.

  (2) laptop registered resolution and icon size of the screen as a profile.

  (3) external monitor connected right click options graphics Intel, insured was custom display, main display plus external monitor, then had to go in a re - click on the name of the saved profile.

  (4) this worked ok until the next day, when turned on laptop and a blue screen. Managed to get this back hard by restarting and completed the steps in N3

  (5) cannot get the Nvidia Control Panel to display anything else than the 3D options, even if it make the default value (instead of the Intel graphic card)

  Can anyone offer some so that I can connect an external monitor without having to go through all this hassle every time? Why this affects the laptop so bad (and also, it runs very slowly after that)

  Running Windows 8 (but with the interface of Windows 7)

  Thank you very much

  Thank you. A quick update, I contacted Lenovo, and they sent the updated bios drivers. I also uninstalled some software Canon MP Navigator and Lenovo EMC Discovery (http://support.lenovo.com/us/en/documents/ht081844?tabName=Solutions). One or all of them seem to have solved the problem, including the slow start.

• HP Pavilion dv6-black screen only works with the external monitor

  I discovered that my screen was not turn on yesterday when I tried to turn on my laptop. Fortunately I was able to plug it into an external monitor with a VGA cable and I have a monitor in my office, but I can not really be restricted to my living room or office to use my laptop.  Y at - it easy fixes to this, or is my only option to take it to someone with experience that replace the monitor for me?

  Hello

  Given the external screen display there are so few opportunities...

  -Sun display-project is a flashlight on the screen and check if you can see the bottom - if background is visible while it is the backlight in the LCD screen that needs to be replaced.

  - Display dark: if it is completely black and nothing is visible when you Flash light on the screen, then it is due to the LCD screen itself might be a broken screen (a cable that connects to the motherboard screen) or could be inverter LCD.

  If the laptop is still under warranty so I recommend you call HP tech support and they will be able to get it fixed for you.

• Proceed with the trial after you open a vi dialog box

  I am a beginner with TestStand. I'm going through the entire sequence until all end with some dialog windows left open without waiting for a user to click on OK/QUIT on the dialogue window to go to the next step of the test. I want the test at the end with no required user interaction.

  I tried with dynamically called vi, but it stops the test - waits until the user closes the window and what, he does not pass the settings of the dialog box (maybe I did something wrong with the dynamic appeal.

  Is it possible to open vi of dialogue and to proceed with the trial without user interaction?

  PS Dialogue vi only receives the arguments and displays them on the chart.

  Hey Michal,.

  You On-The-Fly reports is enabled in the options of your report? I created the sample VI to run in a new thread and set a breakpoint later in the sequence. At this point, in the base_dn with my movie file folder, I got a report_Tmp.xml file that contains the part of the report up to date.

• Want to get an overview with the photo viewer and open with Photoshop

  Hello.  In all previous versions of Windows, I was able to do.  Right-click on an image and the 'Preview' option would open the image in the Windows Photo Viewer, and the option 'Open' it would open in Photoshop (or whatever the editor, I had chosen).  I just installed Windows 7 and I seem to be unable to get to do this.  If I select "Photo Viewer" as the default program for jpg files, I have TWO options 'Preview' in the right click menu.  Both will open it in Photo Viewer.  If I select Photoshop as the default program for jpg files, I get a 'Preview' and 'Open' option, but both open the image in Photoshop.

  How can I configure "Preview" with Photo Viewer, and 'open' with Photoshop?

  Thanks for the tips of registry.  I managed to find and fix the problem.  I tried to fix paint.net as the program open by default, and it has open in paint.net and presented in preview in Photo Viewer.  So I thought it was something to go astray with Photoshop.  Under HKEY_Classes_Root\Photoshop.JPEGFile.9\shell, there is a key-file for 'Preview '.  I deleted who, and now it opens in photoshop and previews in Photo Viewer.

• What are the causes of media error does not exist, even with the inserted disc

  I have a video project of 2 h I want to put on a DVD in NTSC format.  I get a msg of error 'Media does not exist', even with the DVD inserted in the drive.  I checked "Fit content to the space available.  Is the hr project 2 too long to compress the DVD, or are there other possible causes?  I have made a project of 1 1/2 hours without any problem.  I have a lot of hard disk space.

  Download orders

  What version of Premiere Elements and on what operating system works - it?

  The problem is the disc in the tray of the burner not recognised by Premiere Elements. Another frequent related issue is location of burner: burn dialog is empty when the Premiere Elements does not recognize the burner.

  In the problem that you have.

  have a. you tried other brands/types of DVD discs?

  b. If you start a new project and take the new timeline content DVD-video to DVD disc, the problem remains the same?

  B. have you tried to uninstall / free program ccleaner cross / reinstall with antivirus and firewall disabled?

  If you are in a time crunch, you should consider burning the chronology contained in the record and then taking the the VIDEO_TS folder

  recorded in a program like ImgBurn for DVD-VIDEO on DVD production.

  Please check and review and then provide you with the way to details. Looking forward to your results.

  Thank you.

  RTA