static values of choice of message

Hello
I want to create a selection of message with static values, without VO.
How can I do this?
THX

Hello

You cannot create without VO.

VO youi can set static values

Thank you
Gerard

Tags: Oracle Applications

Similar Questions

disipaly choice of message with some initially assigned value

Hello
I created the choice of message using vo, now I need to put this choice of message with default values (which will come from the previous page).
If the user wishes to set up another value, it needs to change based on the list of the values of choice (which will be of the vo).
I used following code in the application process, but it does not work
Staus = (String) pageContext.getSessionValue ("Status");
OAMessageChoiceBean choiceStatus = (OAMessageChoiceBean) webBean.findChildRecursive ("status");
choiceCaseStatus.setValue (pageContext, Staus);
Please can someone help me to get the solution of the above.
Thank you

Hello

If you get the value of the session and beans not null, you can try with the approach below: -.

(1) create a transitional attribute in the vo even who is assigned to the messagechoice field.

(2) make as authorized updated.

(3) set this transitional attribute value in the session value processrequest method (for example:-vo.setattribute ("attributename", Staus))

(4) in the messageChoice field in the Jdev property set the transient attribute as the initial value using SPEL (for Eg:-${oa.) XXyourvonameVO1.attributename}) / / name of the attribute would be your transitional attribute name.

Thank you

Hemant

How to get the value of the element of choice of message in application of process?
Hello

In the method of application of the process of the page controller
I need to get the value of the element of choice of message on the page and then pass the value to am method to call a vo query that requires message value as parameter choice
I tried

Weekend OAMessageChoiceBean = (OAMessageChoiceBean) webBean.findChildRecursive ("WkEndList");
If (weekend! = null)
System.out.println ("sag down:" + weekend.getValue (pageContext));

am.invokeMethod ("initQuery", end of week);

but I'm getting null for the value of the weekend, although the page is shows the values in the drop down.

Help, please.
Thank you Gyan,

I mentioned to use PPR only when the call must be made immediately after the selection of the value.

If you are looking for value without preconditions,
GYAN suggested use String WkEndListValue = (String) pageContext.getParameter ("WkEndList");
You should get the value.

Thank you

With respect,
Kali.
OSSI.

VO with static values
I WANT TO CREATE A MESSAGE OF CHOICE WITH STATIC VALUES. FOR THIS I HAVE CREAT VO
Name: DeviseVO
attributes: RowKey (primaryKey, number)
Values (String)

I creat the initialiserDevise() method and call it from the PR

Public Sub initialiserDevise()
{
String [] values = {'Dinar', 'Euro', 'Dollar'};
DeviseVOImpl pervo = getDeviseVO1 ();
If (Pervo.getFetchedRowCount () == 0)
{
for (int i = 0; i < 3; i ++)
{
pervo.executeQuery ();
Bow of row = pervo.createRow ();
pervo.insertRow (prow);
Try
{
prow.setAttribute ("RowKey", new Number (i));
prow.setAttribute ("values" [i]);
pervo.getCurrentRow () .validate ();
}
catch (Exception ex)
{
pervo.getCurrentRow () .remove ();
}
}
}
pervo.executeQuery ();
System.out.println (Pervo.getFetchedRowCount ());
}

My problem that the list is as empty and the display method 0

Help please

Thank you
Hello

This requirement is quite simple that instead of writing code you can write query in English like this

Select "Dinar" dual union select 'Euro' from dual union select 'Dollar' of the double

and after that, you need not to run the query on this OAF do by itself, even then I suggest you to create a list of choices for this and then later you want to add the value or delete what can be done without changing the code.

Hope this will help :)

Kind regards
Out Sharma

Add choice of message element to the area of the header regarding
Hello

I need to add the value of the element of choice of message to the header area which would come as PERFORMANCE YEAR(2009-2010). The years should come in parentheses which is element of choice of message, and the rest comes from the area of the header. Please someone help me...

Thank you
Ajay.
you have to pass when the page is loaded. In the previous page if I chose the bean of choice of the message (Appraisl years) and after clicking the go button that I need to get in the assessment formula custom in this position, I have to get this year.i need assistance assessment I was struct here.

1st Page process form request
```
import oracle.apps.fnd.framework.webui.beans.message.OAMessageChoiceBean;

if(oapagecontext.getParameter("GoBtn") != null)
{
String messageChoiceValue = (String)pageContext.getParameter("MessageChoiceBeanID");
oapagecontext.putParameter("messageChoiceValue", messageChoiceValue );
}
```
The 2nd Page application process
```
import oracle.apps.fnd.framework.webui.beans.layout.OAHeaderBean;

String scoName = (String)pageContext.getParameter("messageChoiceValue");
OAHeaderBean bean = (OAHeaderBean)webBean.findChildRecursive("ScoNameHeaderRN");
if (bean != null)
       {
         bean.setText(pageContext,pageHeaderText );
       }
```
Thank you
-Anil
http://oracleanil.blogspot.com/

How can we make invisible static value in a text field to the OPA

Hi all
I have invisible static value in a text field in the OPA.
For ex: field contains the value 100 while we manage the maintenance should not display the value 100 or make us the text as invisible field. whenever we submit the interview the value should be passed.
I made the background color of the text in white field, but it reflects all the text fields. I need to make the text of the particular text as invisible field. Can someone give me a solution for it.

Use two different attributes (the one that is indicated in the interview to the need - for example, as "the id selected user" or whatever the phrase is appropriate) and a different attribute, which is the mapped attribute. The second attribute must not be on any screen of the interview (by thus "invisible" for the user). Write a table of rules that concludes that the value of the attribute mapped on is EITHER static value or the selected/expected value according to some logic is appropriate to make a decision in your model of strategy.

Comparison between a static value type String and a type perhaps unrelated number

Well I have another question of my book of text... so far I typed in exactly how they ask me to and even followed some screenshots of examples of theres. All me looks good, but of course, I'm the only one with an untrained eye.
When I run this film I get a compiler error of: 1176 20 comparison between a static value type String and a type perhaps unrelated to line number
Here is my code
import flash.events.MouseEvent;
Stop();
var numberOfCookies:Number = 0;
startBtn.addEventListener (MouseEvent.CLICK, getCookies);
function getCookies(event:MouseEvent)
{
numberOfCookies = (Math.floor (Math.random () * (10)) + 1);
var n: Number = 0;
While (n < numberOfCookies)
{
var cookieInstance:cookieMC = new cookieMC;
addChild (cookieInstance) .x = (Math.random () * 200) + 20, (cookieInstance) there (Math.random () * 150) = + 220;
n ++ ;
}
}
goBtn.addEventListener (MouseEvent.CLICK, checkNumberTyped);
function checkNumberTyped(event:MouseEvent)
{
If (checkBox.text == numberOfCookies) //this is the line 20
{
gotoAndPlay (2);
}
on the other
{
gotoAndPlay (3);
}
}

The error indicates well enough the problem... the compiler doesn't like to compare different types of things. In your case, a type is a string, and the other type is a number. If you need to force one of them to become another type, and you can go either way...

If (checkBox.text is String (numberOfCookies))

OR

If ((checkBox.text) Number is numberOfCookies)

Static value in the formula for the column
Hi all, I have a pretty simple question. How can you put a static value in a formula in the column? Just written a number does not work.
You get the ODBC error because you are using the custom as a standalone field. Use in conjunction with any other field.
For example: If the test then use your number field and date. then in the design of pivot, put date (set to the Max aggregation) measures and your number in the sections. This will work.

Query Plan changes when a static value is assigned to an update
I have a table
```
SQL> create table test
  2  as
  3  select '001' col
  4    from dual
  5  connect by level <= 15000
  6  /

Table created.

SQL> exec dbms_stats.gather_table_stats('SYSADM','TEST',CASCADE=>TRUE)

PL/SQL procedure successfully completed.
```
Now, I want to update the table so that each 5000 lines to be incremented as the value pass
001.002... and so on.

I did it.
```
SQL> set autotrace traceonly explain
SQL> set timing on
SQL> update test t
  2     set col = (select to_char(trunc(rno/5000)+1,'fm009')
  3             from (select row_number() over(order by rowid) rno,
  4                               rowid
  5                     from test) t1
  6             where t.rowid = t1.rowid)
  7  /

15000 rows updated.

Elapsed: 00:03:49.06

Execution Plan
----------------------------------------------------------
   0      UPDATE STATEMENT Optimizer=ALL_ROWS (Cost=8 Card=15000 Bytes=60000)
   1    0   UPDATE OF 'TEST'
   2    1     TABLE ACCESS (FULL) OF 'TEST' (TABLE) (Cost=8 Card=15000 Bytes=60000)
   3    1     VIEW (Cost=55 Card=15000 Bytes=375000)
   4    3       WINDOW (SORT) (Cost=55 Card=15000 Bytes=60000)
   5    4         TABLE ACCESS (FULL) OF 'TEST' (TABLE) (Cost=8 Card=15000 Bytes=60000)

SQL> rollback
  2  /

Rollback complete.

Elapsed: 00:00:01.00
```
It works very well. But what I discovered is. When I change the update above. And replace the
TO_CHAR (trunc(RNO/5000) + 1, 'fm009') with a static value as '1' the query plan changes and
It runs very quickly.
```
SQL> update test t
  2     set col = (select '1'--to_char(trunc(rno/5000)+1,'fm009')
  3             from (select row_number() over(order by rowid) rno,
  4                               rowid
  5                     from test) t1
  6             where t.rowid = t1.rowid)
  7  /

15000 rows updated.

Elapsed: 00:00:00.01


Execution Plan
----------------------------------------------------------
   0      UPDATE STATEMENT Optimizer=ALL_ROWS (Cost=8 Card=15000 Bytes =60000)
   1    0   UPDATE OF 'TEST'
   2    1     TABLE ACCESS (FULL) OF 'TEST' (TABLE) (Cost=8 Card=15000 Bytes=60000)
   3    1     TABLE ACCESS (BY USER ROWID) OF 'TEST' (TABLE) (Cost=1 Card=1 Bytes=4)

SQL> rollback
  2  /

Rollback complete.

Elapsed: 00:00:01.00
```
Why is it so. Can someone explain?
Karthick_Arp wrote:
SQL > update of test t
2 set col = (select to_char (trunc(rno/5000) + 1, 'fm009'))
3 from (select row_number() over (order by rowid) rno,
4 rowid
5 test) t1
6 where t.rowid = t1.rowid)
7.

15000 lines to date.

Execution plan
----------------------------------------------------------
STATEMENT UPDATE 0 = ALL_ROWS optimizer (cost = card 8 = 15000 bytes = 60000)
1 0 UPDATE OF 'TEST '.
2 1 TABLE ACCESS (FULL) 'TEST' (TABLE) (cost = card 8 = 15000 bytes = 60000)
3 1 VIEW (cost = map 55 = 15000 bytes = 375000)
4 WINDOW 3 (TRI) (cost = map 55 = 15000 bytes = 60000)
5 4 TABLE ACCESS (FULL) 'TEST' (TABLE) (cost = card 8 = 15000 bytes = 60000)

SQL > update of test t
2 set col = (select '1' - to_char (trunc(rno/5000) + 1, 'fm009'))
3 from (select row_number() over (order by rowid) rno,
4 rowid
5 test) t1
6 where t.rowid = t1.rowid)
7.

15000 lines to date.

Execution plan
----------------------------------------------------------
STATEMENT UPDATE 0 = ALL_ROWS optimizer (cost = card 8 = 15000 bytes = 60000)
1 0 UPDATE OF 'TEST '.
2 1 TABLE ACCESS (FULL) 'TEST' (TABLE) (cost = card 8 = 15000 bytes = 60000)
3 1 ACCESS TABLE (BY USER ROWID) OF 'TEST' (TABLE) (cost = 1 card = 1 bytes = 4)

Why is it so. Can someone explain?

In addition to what Rob has already said, the answer to your question is: given that the optimizer is smart and recognizes that your WINDOW TYPE in your second query (aka NWR) is never accessible and therefore simply ignores this part of the application. It turns it to a simple statement like this:
```
update test t
   set col = (select '1'
           from (select rowid
                   from test) t1
           where t.rowid = t1.rowid);
```
who can simply access the TEST table for each row of rowid, while your first query should do recursively for each TEST line full table scan. Using a statistics AUTOTRACE, you should see a large difference in e/s logic for both statements.

Using DBMS_XPLAN. DISPLAY could reveal more details what happens, if you're already on 9i or later version (seems to be 9iR2).

Kind regards
Randolf

Oracle related blog stuff:
http://Oracle-Randolf.blogspot.com/

SQLTools ++ for Oracle (Open source Oracle GUI for Windows):
http://www.sqltools-plusplus.org:7676 /.
http://sourceforge.NET/projects/SQLT-pp/

Delete an empty value in poplist (bean of choice of message)
Hi all

I created a Style element bean "OAMessageChoiceBean". I have a simple VO behind one that displays 'Yes', 'no '.

Query is just a selection of Yes, no double with a Union.

In the backend, when I run this query its fine. But there is an empty additional value which is the first in the menu dropdown. I don't want this value that is displayed.
Instead, I want only 'yes' and «»

No idea how to remove it?

Thank you
Martine
In the property inspector there is an option to 'add an empty value. Go to false.

Concerning
Sumit

Error ID NOTINSTALLVALZ Toshiba value added Package installation MESSAGE ERR message

I got this error message when install the Toshiba value added Package: ID_ERR_NOTINSTALLVALZ_MESSAGE on my M105-S3011 with the Vista operating system. How can I eliminate it? Should I update my BIOS to v5.10? Because I run XP and Vista in my laptop, so I can't update BIOS to 5.10 because it only supports VISTA, not XP.

Someone at - it ideas?

Salvation Jones

It seems that today is your lucky day ;)

OK, this forum is a tiny knowledge base! I found this thread on the same question:
http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=20471&MessageID=75256

It could be useful! Please let me know if it works or not!

How do I default sysdate value in the input message text column
Hello

In the area of research start date and end date, two columns are there. These two columns are columns of text message entry. Each property of the column, I gave sysdate in the initial value and the type of data selected as Date. When I run the OAF page I can't see the value of default todays. Could you please help me on this?

Thank you
Sri
Hi Sri

You can use pageContext.getCurrentUserDate in the PR method and then set the attribute corresponding to this value VO.
```
              java.util.Date sysdate = pageContext.getCurrentUserDate();
              String convSysDate = pageContext.getOANLSServices().dateToString(sysdate);
              OAMessageDateFieldBean  bean = (OAMessageDateFieldBean)webBean.findChildRecursive("StartDate");

              if(bean != null)
              {
             bean.setValue(pageContext, convSysDate);
              }
```
AJ

static value list

How is the easiest way to get a static list of value. No table behind.

YES - 1
NO. - 2
ALL - 3

Tone

Like this?

SQL> create or replace type lov_t as object
  2  (code varchar2(3)
  3  ,id number)
  4  /

Type created.

SQL> create or replace type lov_table_t as table of lov_t;
  2  /

 Type created.

SQL> select *
  2 from table(lov_table_t(lov_t('Yes',1),lov_t('No',2),lov_t('All',3)))
SQL> /

COD         ID
--- ----------
Yes          1
No           2
All          3

SQL>

Hidden and protected by default point unregistered static value?
Hello

a form of DML, I have a hidden and protected from the text field component. I have these settings:

Source:
Still, replacing value that exists in session state
Static assignment (the value corresponds to the attribute of the source)
By session
PARTY_SC (Source value or expression): this is the column name
After calculation of calculation (Nothing)

By default:
Default value: 'FOR '.
By default the value Type: static text with Substitutions of Session State

What I'm trying to achieve is to set the value of this field (element) before I / U in the database. However, this does not wotk as the Session value of the item remains NULL and whan pressing record button of database of course she rejects with msg: ORA-01400: cannot insert NULL into «WEBPOS» «PARTS '.» "" PARTY_SC ". Cannot process the PARTIES of the table line. Back by demand. There is also a validation rule for the value null in the processing of the Page for this field.

No idea why and how solve it?

TIA
Helllo

If you use the automatic treatment of the line (DML) to insert into the table and then Type 'Source' for the page element corresponding to "PARTY_SC" should be "Database column".

CITY

How to make the record value appear in the "Message of success of the process?
Hello

I have a page called process "insert" "On submit - after calculations" and Validations with the look of PL/SQL codes such as:

Start
insert into abc (col1) values (: P7_col1)
end;

In the "Message of success of the process", how can I include the record value (ie: P7_col1, say, it's "Item1") in the message so that it could look like:

Item1 has been added successfully.

Thank you very much
Helen

Published by: user4503001 on July 21, 2009 11:20
Helen,

Substitution variables must be written in capital letters, always.

Scott

static values of choice of message

Similar Questions

Maybe you are looking for