Vista stops without warning regardless of which program, I opened

Similar Questions

• After that windows update, the system stops without warning and can not perform restore

  My computer automatically performed an update on yesterday now it pc closes down without warning system will not perform a restore to an earlier date that I get a message that an unexpected error occurred during restore. I tried two different restore points, any help is appreciated.

  Hello

  There are a variety of reasons for system restore problems

  Norton and Norton product Tamper Protection is the main

  Read about it:

  http://us.Norton.com/support/kb/web_view.jsp?wv_type=public_web&docURL=20101101224849EN&LN=en_US

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  You can try restoring the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  and malware can interfere with the restoration of the system

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• Vista close without warning

  Lately my pc has been randomly close without warning.  It doesn't seem to be compatible on when he decided to "shut down".  I noticed that if I turn it on and just leave, so it seems that the time it takes to turn off is shorter.  But the time intervals are different each time.  If I turn it on and use a heavy application immediately (like Need for Speed) and it remains on 90% of the time without problem.  I tried a number of analyses of virus and so far nothing has much turned upward.  I checked my hardware and all is well.  There is a problem in the windows registry, virus, or vista is just corrupt.

  I am running:
  Vista Business SP2
  3 GB ram
  3.0 ghz AMD Athlon 2 x
  NVIDIA 9500 GT graphics card
  PC Chips motherboard
  80 GB HD (hard drive was free, hoping to get a much bigger VERY soon)
  Hello
   
  1. don't you make changes before the show?
   
  This happens usually if the program or device driver is defective.
   
  Step 1: to find out what is causing the problem, check the event logs to find out what is causing the problem.
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer
   
  You can try the following steps to keep your system up to date, as it has sometimes solves the problem.
   
  Step 2: we recommend updating all drivers for devices on the computer and install the latest updates of windows for better functionality.
  To update the device driver, try the following steps.
  1. click on start, type devmgmt.msc and press to enter.
  2 to the list of issues, do a right-click on the following and click on update driver.
  a. graphics cards.
  b. the network cards.
  c. Chipset driver.
  3. If prompted, restart the computer and follow the same steps for updating other drivers.
  
  For more information about updated drivers, visit this link: http://windows.microsoft.com/en-US/windows-vista/Update-a-driver-for-hardware-that-isn ' t-work properly
  
  Step 3: check in safe mode.
  If the problem does not persist in safemode, it then confirms that some programs not Microsoft is causing this issue.
  Visit this link to start the computer in safe mode: http://windows.microsoft.com/en-US/windows-vista/Start-your-computer-in-safe-mode
   
  If the problem persists, check the logs of events and after return details, so that we can help you further.
   
  I hope this helps.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• Program for a game always ask to choose which program to open it with

  Original title: how to remove programs from my list of default programs without deleting them from my computer?

  Since I had a rogue software, whenever I open something that I have to choose what kind of program to open it with. But I have two files with the same name (one is the installation of a game and the other the actual game) and I can't select the game to go to the list of default programs, as I already have the installation file! Sorry if this makes no sense. :)

  Go to http://www.mydigitallife.info/2008/06/22/reset-and-fix-broken-windows-vista-file-ext-and-type-associations-include-exe-com-sys-zip-lnk-folder-drive/ and highlight the EXE option and click or double-click the EXE to fix the EXE files file association.  Do the same for LNK.  I think that it can take care of your problem 'open with '.  Then the other problem is more a problem.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• TravelMate p253 stops without warning

  Bought my Acer may 2014 and recently the pc stops randomly without any warning. No blue screen or the reason.  Help, please

  Now, I've discovered it's a hardware fault.  Yesterday, I contacted support and was invited to start the Pc in Bios mode and leave in this State and to see if firm mc always down which he did it 32 minutes later.  I hope this will help someone else who has this problem.  Thank you all for the help you provided us

• My desktop computer Acer Aspire AM1100-B1300A suddenly stops without warning. What is the cause of close?

  I've had the computer alittle more than three years now. He began to close in on its own all recently. I noticed the Tower Gets and still accellerated before turning off.

  Hello

  Accellerated? You don't know how to tell you that?

  Could be heat related - try using a small fan to blow into the air intakes to see if that helps.

  To be able to remove ALL and reinstall all the cables (both ends), card and memory - in fact remove and
  replace - do not just tight. Remove the dust bunnies and clean the vents. Check that the
  fans of work (before and after opening the case).

  This sounds like material so if the above does not help you then probably need the help of a
  real computer store (not of leeks and glances at a Best Buy or other department stores) or the system
  Support from the manufacturer.

  ===========================================================

  Check out these utilities to see if information may be collected:

  It is an excellent tool for displaying the blue screen error information

  -Free - BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  and displays information about all accidents of a table.
  http://www.NirSoft.NET/utils/blue_screen_view.html

  -------------

  MyEventViewer can be verified at the time of the blue screen (BSOD) within a second or so of the
  time of the BSOD to provide more information about the possible cause - see TIP.

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
  Set it for a bit before and after the time of the BSOD.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  ------------

  AppCrashView - free - a small utility for Windows Vista and Windows 7 that displays the details of all the
  application goes down has occurred in your system. The information breaks down is extracted from the .wer
  the files created by the Windows Error Reporting (WER) of the operating system component of each
  time that an accident has occurred. AppCrashView also allows you to easily record the list of accidents to
  text/html/csv/xml file.
  http://www.NirSoft.NET/utils/app_crash_view.html

  ------------------------------

  Also do this so you can see the probable bluescreens. (You may or may not be able to see
  them if they occur even after doing this according to the cause.)

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  =========================================

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Whenever I click on any of the application file, it asks which program to open it, and then try to download?

  I was at work, when my antivirus went nuts malware. I clicked to quarantine and delete what he did. All of a sudden whenever I click on ANY application, it asks the .exe file. When located, he tries to download it. I can't load anything, including work files, or the system restore. Exactly the same problem exists in safe mode too, and it won't charge the safe mode system restore. A full system cleaning is not possible, because this computer contains files of very important work. I can't use internet there longer. I can burn things on cd on my PC, but I can't do anything wise internet on that one.

  Any help is greatly appreciated.

  Hi BethaG,

  Try the following steps:

  Step 1:

  Try running the following Microsoft Fixit and see if it helps:

  When you run an .exe on a Windows Vista-based or Windows 7 computer file, the file may start another program

  Note: You can download and save the Fixit on another computer as well and copy it to the computer problem and then try to run it.

  Step 2:

  Try to create a new user account and check if the problem persists.

  Create a user account

  Difficulty of a corrupted user profile

  I hope this helps.

• IE 8 Vista on an HP - IE and other programs once opened, it is "not responding".

  This happens often but not always. When I try and open other programs like photo gallery Windows, it will give me the same message. I ran Mr. Fix on all tests, disabled my Add ons and reset Internet Explorer settings, and still the problem. Any other suggestions? Whatever that is would be helpful at this stage. Thanks :)

  Hi tammy95,

  Given that this is happening in several programs, please put your system in clean boot configuration to verify if there is no improvement. If so, you can follow the methods of disposal described in the article below to determine the guilty application causing this problem.

  Please see this article for detailed information on how to do it.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Please check that you put your computer to normal startup mode after completing the troubleshooting steps. Steps are available in the article above.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can I help my pc find out which program to open Photoshop CS6 download with?

  I downloaded a .7z file that is supposed to be Photoshop CS6. My computer is unable to establish what program use to open the download with - and I have no idea! I read somewhere that you need to download an .exe so file, but I downloaded it several times now and the same thing. There is no .exe file, I can find. Help, please!

  Hi IdaMari,

  .7z is a compressed file that can be opened in an extraction software. If you are using a windows machine, you can use the software Winrar, Winzip or 7z to extract the .7z file.

  I hope it helps.

  Concerning

  Ludo has

• My gateway Tablet close without warning. Now more trouble...

  My Gateway Tablet PC with windows XP stops without warning a few days ago. Now when I try to start, it doesn't do anything (the screen is black, fan works, power and light is on), it will start up, I log on, and then it crashes after a few minutes, or the screen goes black (power light always). I managed to make it work yesterday, and I ran the Microsoft Saftey Scanner. He came clean. I keep reading on overheating which could cause this, but I don't think that's it. The fan seems to work very well, and it does not start or stops immediately after 2 days of course stop. It worked fine before all this, what's wrong? Help, please!

  Hi Bmjohnso9192,

  ·         You receive an error message or error code?

  ·         Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: Try the SFC (System File Checker) scan on the computer.

  To run the System File Checker tool, follow these steps:

  a. click Start and click run, then type cmd in the box start the search.

  b. right click on cmd in the list programs, and then click run as administrator.

  c. If you are prompted for an administrator password or a confirmation, type your password or click on continue

  d. at the command prompt, the following line and press ENTER:

  sfc/scannow

  For more information, see the article:

   

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

   

  File system (CFS) Checker

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/system_file_checker.mspx?mfr=true

  Method 2: You can also check the below mentioned article Microsoft Knowledge Base and check if the problem persists.

   

  Advanced Troubleshooting for shutdown problems in Windows XP

  http://support.Microsoft.com/kb/308029

  Let us know if that helps.

• When starting my laptop, a warning poster says c:\program can affect the function of other applications, appointing him to c:\prgram1 will solve the problem

  Hello

  When starting my laptop (Windows vista), pop - up warning message indicating c:\program can affect the function of other applications, by naming to c:\prgram1 will solve the problem options: would you like it to remane, or ignore it.

  Can you help me

  Thank you

  Original title: Cprogram

  Hello

  Method 1:

   I recommend you put the computer to boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2:

  You can also scan your computer the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

   

  Hope this information is useful.

• My laptop Shutdown without warning

  My new hp Pavilion I fighting around October 2014' seem to be stopped without warning. He stopped with the stop window displayed you. it happen 3 times. Help, please

  Hi @timotius,

  Thank you for visiting the Forums HP's Support and welcome. I looked into your problem on your HP laptop and with that he closed without warning. Here is a link to restore the BIOS. Please note remove any and all USB devices and remove the memory card in the slot of the card reader. Disconnect all non-essential devices.

  Can get into safe mode with command prompt?  sfc/scannow should scan your system to find errors on the command line. You can see this Microsoft document on the system recovery options.

  Here is a link to the HP Support Assistant. Simply download and run the application and it will help with the software and drivers on your system. If you need an update, this could cause what you have installed.

  Have you installed a software or hardware?

  Hope this helps you.

  Thank you.

• Laptop shuts down without warning

  Hello

  I have a laptop - HP Pavilion Sleekbook 15-b000ej with Windows 8.

  Recently, she stops without warning, but only when working on the battery. Although I guess the battery is old and I need to get a new - I don't understand, is why the laptop stops instead of going to hibernation. I checked the power settings. It is supposed to never closed, but go into hibernation, but it never does.

  So is it the battery or something else?

  Thank you.

  Hello

  I would like to know some information about the problem so that we can help you better.

  You made any hardware or software changes on your computer before the show?

  Thank you for details on the question and your efforts to resolve.

  I also know that the inconvenience that you are experiencing due to shutdown of Windows problem. I will definitely help you.

  This problem may occur because of corrupted or incorrect power settings.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run Troubleshooter of power and control. Please follow these steps:

  a. press Windows + C keys together, and then click Search.
  b. type Troubleshooting in the search box and click on it in the search results.
  c. click on "display all" and then click "Power".
  d. click on 'Next' and follow the on-screen instructions.

  If this does not help, use method 2.

  Method 2:
  Please see suggestions of Kate Li and marked as answer kelvin_hsu, Microsoft of contingent personnel, Moderator on January 27, 2014.
  https://social.technet.Microsoft.com/forums/Windows/en-us/3149cdae-21ee-4B2A-9321-5d4841e1c24b/Windows-shuts-down-instead-of-hibernation?Forum=w8itprogeneral

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Can't open anything on the desktop without having to choose a program

  I am unable 2 open anything without having ' ' to choose a program "to open a file. I never got 2 before doing so. but the last time I was on my laptop; microsoft security had picked up "severe Trojan horses". " any advice would be so gratefull... when I connect 2 another account, it is not the case.

  I am unable 2 open anything without having ' ' to choose a program "to open a file. I never got 2 before doing so. but the last time I was on my laptop; microsoft security had picked up "severe Trojan horses". " any advice would be so gratefull... when I connect 2 another account, it is not the case.

  I guess that you had deleted Trojans now?

  Question:
  Is this account that you have problem with an administrator account on ?

  (1) if so, can you create another Admin account?
  So yes even once, when you have a new Admin account, connect to it. Use this new administrator and DELETE the former admin.

  (2) if the answer is no and that it's only a user account, then it's even more simple.
  Login to your Admin account, remove this user account.

  t-4-2

• wireless keyboard stopped working without warning.

  Original title: wireless keyboard stopped working without warning.  I use my keyboard to touch screen which is very uncomrfortabe for me.  Any ideas?

  Windows 8
  Computer and the keyboard is less than one year

  Remove rear USB Monitor and re - lower corner insert. It worked for me.