Status icon Internet connection in the toolbar

Similar Questions

• The same day as my expired Norton my internet connection icon says... unknown internet connection. The dependency service or group was able to start.

  the dependency of the orgroup faaied to start service unknown Internet connection.

  The same day as my expired Norton my internet connection icon says... unknown internet connection. The dependency service or group was able to start. I tried all the suggestions on this page. Can't even find the virus that the internet not connected. My livebox is grateful for the laptop please help

  Hello

  ·         You will remember to do recent changes on the computer before this problem?

  ·         Is the question only for the icon network did you try to open a Web page and check?

  ·         What suggestions do you have tried?

  ·         What is the exact error message?

  ·         Have you tried all the steps from the link?

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-networking/connection-status-unknown-the-dependency-service/92203623-b6d5-4301-8c79-00210abbcdd4

  I suggest you follow the steps mentioned below:

  Method 1:

  Follow the steps in the link and check if the problem persists:

  http://support.Microsoft.com/kb/943996

  Registry warning:

  This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the link below to follow the steps to back up registry:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Method 2:

  If the previous step fails, follow the steps in the link and check if the problem persists:

  http://support.Microsoft.com/kb/936211

  Method 3:

  If the previous step fails, reset WinSock and check if the problem persists:

  http://support.Microsoft.com/kb/811259

  Registry warning:

  This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the link below to follow the steps to back up registry:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Method 4:

  Temporarily disable the norton software (and any other security software) and the firewall on the computer as a test and check if this solves the problem follow the link below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  If disabling the antivirus software solves the problem, you may need to configure the settings of the antivirus as a result program.

  Note: make sure that you enable the antivirus software, other security and firewall programs.

  Warning: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

• I lost my internet ion in the toolbar

  I lost my internet ion in the toolbar. How can I get that back on the toolbar. It is the ion that shows if you connected at the local level and, or through the internet. He was here for a few days. All is well with the internet. just no ion in the toolbar.

  computer is;  HP-m8000n

  OS Vista Home premium 32-bit

  Hello

  Try Method 1 and if it is not available, try Method 3 in the link:

  "How to activate or disable the Notification area system icons in Vista"

  http://www.Vistax64.com/tutorials/106787-notification-area-system-icons.html

  You can also try a system restore to before that was the problem:

  «How to make a Vista system restore»

  http://bertk.MVPs.org/html/restoresysv.html

  See you soon.

• Vista no poster more internet connection in the notification area (2 peak of small TV) - how can I get that back?

  I lost the icon of internet connection in the notification area (2 small pic of TV) - how do I get it back please?

  Hello

  There are different ways to fix it

  read all the information on the link below

  Try Method 1 or 3

  Method 1. :

  1. right click on the taskbar and click Properties.

  2 tab Area of Notification .

  3 check the (on) or disable (off) the options you want or do not want to display on the Taskbar Notification area

  Method of reading 3 etc. in the link below

  How to enable or disable the Notification area system icons in Vista

  http://www.Vistax64.com/tutorials/106787-notification-area-system-icons.html

• notification area: How can I get my internet connection and the life of the battery and its return in the notification area

  How can I get my internet connection and the life of the battery and its return in the notification area

  on the bottom right of my screen?

  I tried the properties and to add notifications but it net let me add them...

  Hello

  1 Please reboot nothing so interfere with this process.

  Click with the right button on Taskbar - Properties - tab Notification area - check box Volume - if it is grayed out
  Then, use this link. (The battery is the same method.)

  How to enable or disable the system tray in Vista icons (there are several methods
  and you can to use them all).
  http://www.Vistax64.com/tutorials/106787-notification-area-system-icons.html

  If necessary: a Mr Fixit

  System icons do not appear in the notification area in Windows Vista or in Windows 7 until you
  Restart the computer
  http://support.Microsoft.com/default.aspx/KB/945011

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Whenever I use my iPhone attaches to internet connection, in the window 'Connections available to the general public', my iPhone is presented as "iPhone 1" the next time that I used it, «iPhone 2 "then 3 then 4 etc.»»

  attaches to the iPhone

  Whenever I use my iPhone attaches to internet connection, in the window 'Connections available to the general public', my iPhone is presented as "iPhone 1" the next time that I used it, «iPhone 2 "then 3 then 4 etc.»»  Currently up to 9. How can I stop this from happening? Or is it still important?

  Hello StevenHuurman

  Try this.

  1. turn on WiFi tethering via the iPhone.

  2 connect the system to the iPhone tethered via the wireless connection.

  3. without closing the iPhone tethering, disconnect the straps of the iPhone system.

  4. now reconnect the system to the loin and Note If the wireless connect denominator increases.

  For the above steps, if you have access to other computers, then try the same steps and allow to know the results of these institutions.

  If the denominator goes up so we know it is a problem with the system and if not then whenever you turn off modem, then again on the iPhone are considered as a new network connection and something has changed in the phone.

  Another thing, you have selected the option for the system to connect automatically when this network is in range?

  Unfortunately I do not know what version of the OS you have here are the steps for Windows Vista and Windows 7. During the installation process for Windows Vista and Windows 7, you will see the option "connect automatically when this network is in range. Make sure that you click this box when you configure the connection to the loin.

  Let me know the results. Thank you.

• my "speaker" icon has disappeared from the toolbar, and I have no sound. Any ideas?

  my "speaker" icon disappeared suddenly from the toolbar, and I have no sound. Any ideas?

  Start > settings > Control Panel > sound and Audio devices > Volume tab

  Make sure mute is not checked

  Verify the Place Volume icon in the taskbar

  Ok

• _ (Speaker) volume icon is missing from the toolbar, and I can't adjust the volume! How do I get it back? __

  The volume
  (speaker) icon is missing from the toolbar, and I can't adjust the volume! How can I get that back?

  Hello
   
  What changes did you do before the question?
   
  I would like you to follow these steps to solve the problem.
   
  Step 1:
   
  a. right-click in the taskbar near the time display and you'll get a context menu.
  b. click Properties.
  c. under the icons system to always display, check the volume.
  d. click on apply.
   
  Step 2:
   
  Click on fixit from the link below.
   
  System icons do not appear in the notification area in Windows Vista or Windows 7, you must restart the computer
  http://support.Microsoft.com/kb/945011/en-us
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Windows update error: your PC is not connected to the internet. connect to the internet, and then try again

  Original title:

  Windows Update

  Hello

  When I open the store windows I get an error saying

  your PC is not connected to the internet. connect to the internet, and then try again

  is there an internet setting before the update of win8 or one of the applications

  Thank you

  How to solve the problems of connection with Windows Update
  http://Windows.Microsoft.com/en-us/Windows-8/how-solve-connection-problems-Windows-Update

  How to troubleshoot problems connecting to Windows Update or Microsoft Update
  http://Support2.Microsoft.com/kb/818018/en-AU

• When I click the icon creative cloud on the toolbar of my MacBook Pro, the window opens, but there are no icons on the screen. So I can't open the Lightroom program

  When I click the icon creative cloud on the toolbar of my MacBook Pro, the window opens, but no icons don't pop open. So I can't use Lightroom.

  I restarted the computer and its working fine now. In addition, my computer has been picking up wi - fi a neighbor. So when I fixed that AND restarted the computer icons came back.

  Thank you!

• Photoshop CC was supposed to be able to use without an internet connection if I worked online at least once a month...  I tried to work offline at home after working online for a while. The sign came and said ' no Internet connection /- and the options we

  Photoshop CC was supposed to be able to use without an internet connection if I worked online at least once a month...

  I tried to work offline at home after working online for a while. The sign came and wrote

  «No Internet connection / - and the options have been - try again or continue offline "and I could not work no prob. by choosing «continue in offline mode»

  However, I've used photoshop for a few hours yesterday and I brought my laptop home from my photographer friend to share the work of editing... and I couldn't open Photoshop.

  "The network is not connected TRYagain.

  It was the only option, does not allow me to continue offline...

  You have an idea why I couldn't?

  An Internet connection is required the first time you install and your creative Cloud of license applications.

  You can use the applications in offline mode, but must be online from time to time to validate your software licenses. Please see this link for more details: CC help | Creative cloud / Common Questions

• After a windows down I must reinstal Foto shop 13 items. I have a good internet connection, but the program cannot make a connection for singh to the top.

  After a windows down I must reinstal Foto shop 13 items. I have a good internet connection, but the program cannot make a connection for singh to the top.

  Log, activation, or connection errors. CS5.5 and later, Acrobat DC

• Acrobat DC - set the speed of internet connection to the local network

  Hello

  Is it possible to adjust the speed of Internet connection to the local network (in Edit > Preferences > Internet > Internet Options) using the DC Acrobat Customization Wizard?

  Thank you!

  Samir Rossi

  Use the Adobe Customization Wizard Registry Panel and this entry:

  [HKEY_CURRENT_USER\Software\Adobe\Adobe Acrobat\11.0\AVGeneral]

  "iConnectionSpeed" = dword:00989680

• Disable the Internet connection for the virtual machine.

  Is it possible to disable the internet connection to the virtual machine from Windows XP with on the neutralization of him on my Mac?  I just want to connect to the internet if/when updates are required.  Any other time.

  I run Windows XP Pro SP1 on VMware Fusion v. 2.0.1

  You have a virtual NETWORK adapter, Fusion UI calls it just a network adapter (which, due to a bad design, choice flowing from the settings box, but it's another criticism for another time...) This screenshot shows a disconnected virtual NIC:

  

• Unknown connection status - unable to connect to the Internet, Vista

  Hello. My computer was working fine last night, but when I started it today, I couldn't go online. When I move the mouse over the network and the share icon in the lower left corner of the computer, he said: "the dependency service or group could start unknown Connection status. When I try to diagnose the problem, I can not because the diagnostic policy Service is not running. When I go to the Open Service Control Manager, access is denied.

  Meanwhile, I keep getting warnings that my firewall is not enabled. When I try to enable it, I get a message that Security Center can't turn on.

  I ran Avast and he found nothing wrong. I tried to do a system restore, but that did not help. I tried to go to "Connect to the Internet" via the control panel and network layout and I was told that the wizard has encountered an error and could not connect. I can't connect and I can't always turn on a firewall. What should I do? Please help me.

  Hello

  Maybe an update caused the problem, although it could have been something different.

  Try a restore of the system to a point before that happened. And immediately thereafter enter
  Control Panel - Windows updates - top left settings and set it to download and informs you instead
  Automatic. Leave it until you are sure that everything is OK and then you can add them one at a time
  to troubleshoot BUT click right on and HIDE all the driver updates. If after a day or two there is no
  causing problem of updates then restore the automatic updates.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  To uninstall an update if you determine that there are problems - Panel - updated Windows - down left-
  Updates installed - uninstall
  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.