Steps to install Oracle 10 g 11.2.0.4?

Similar Questions

• Need help to install Oracle 10.2.0.5 on Failsafe 3.4.2 on Windows Server 2008 R2 x 64

  Hi all

  I'm trying to build a cluster ON / OFF on Windows Server 2008 R2 x 64 using integrated security. The Oracle DB I install is EE 10.2.0.5.

  I have Oracle 10.2.0.4 and Patch 10.2 . 0.5 so install Oracle, it seems not to be a problem. The problem is with Failsafe.

  I downloaded the version 3.4.2 because with version 4, I can not add 10g (I can't upgrade to 11 or 12) DBs.

  I ask you, is there a good way to build infrastructure because I'm having a LOT of trouble to install everything?

  I have to install Oracle DB using local administrator because my domain account (which has Admin rights) cannot.

  I have to use my domain account to manage the Cluster because the local administrator cannot.

  I am all confused and it does not work everytime I try to add a resource to integrated security.

  So I need something like a short list to understand the correct sequence to install. Something like:

  Step 1: Install Failsafe on both nodes using Local Admin

  Step 2: install Oracle EE on both nodes using Local Admin

  Step 3: Create DB on the first node using Domain Admin

  I hope someone can help!

  Thank you!

  Ok! Found the solution. And of course it was a Windows problem and not Oracle. I just had to go to "Control Panel"-> account-> user account (Yes, 2 times)-> change user account control settings and put the bar you on the left to never notify. Restart the server and here! More no popups for administrator rights!

  You see them all!

• Installing oracle on rhel on VM ifconfig

  Dear friends...
  
  I have install the virtual machine on windows xp, and in it, I install linux rhel 5,.
  
  Now, I read the steps to install oracle 10g r2
  one of the preinstallation steps is to check the IP address to put in
  
  / etc/hosts
  
  When the root Linux prompt, I gave the command
  
  ifconfig eth0
  
  I get command not found error message...
  
  Please someone help me...
  Thanks and greetings
  
  Published by: AAP on 18 February 2012 03:23

  I think there is a problem with your installation of linux, because these places of orders should be in the PATH of the root. Anyway, you can do this:

  1. open a session as root, run "/ usr/bin/updatedb '. It will take some time.
  2. When you want to find something, just type "find something", and the matches will be displayed:

  [oracle@ol6-112-rac1 ~] $ locate system-config-network
  /etc/pam.d/system-config-network
  /etc/pam.d/system-config-network-cmd
  /etc/security/console.apps/system-config-network
  /etc/security/console.apps/system-config-network-cmd
  /etc/setuptool.d/99system-config-network-TUI
  * / usr/bin/system-config-network *.
  * / usr/bin/system-config-network-cmd *.
  * / usr/sbin/system-config-network *.
  * / usr/sbin/system-config-network-cmd *.
  * / usr/sbin/system-config-network-tui *.
  / usr/share/System-config-Network

• Installing Oracle 11 GR 2 ASM in stand-alone server Linux

  Hello
  
  Everyone can share documents (or) steps for installing Oracle 11 g ASM 2 in Linux 5.7; Stand alone server.
  
  Thank you very much.
  
  Thank you
  A. Nagy

  Reference: http://askdba.org/weblog/2009/09/11gr2-database-installation-with-asm-on-oel5/

  Published by: rajeysh on November 2, 2011 00:23

• Install Oracle locator

  Hi all
  
  We use Oracle Database 11 g Enterprise Edition Release 11.2.0.2.0 - 64 bit Production.
  
  Oracle multimedia is not installed in our data base. I want to know the steps to install Oracle Locator. All links to the documentation would be also useful.
  
  Note: I found some documentation to install oracle spatial, but I wanted to just install and use Oracle locator, which is a free feature.
  
  Thank you very much in advance for the help.

  PL see MOS Doc 220481.1 (master note for Oracle Spatial and the Installation of Oracle Locator)

  HTH
  Srini

• Problem installing Oracle Application R12.1.1

  During the installation of Oracle Application R12.1.1 installation I face this error,
  Windows cannot find «.\jre\NT\1.5.0\bin\java ". Make sure you typed the name correctly and then try again.
  
  Please someone idea to solve this problem

  Asad,

  Please see this thread.

  Steps for installing Oracle E-Business Suite R12 on Windows XP
  Steps for installing Oracle E-Business Suite R12 on Windows XP

  Kind regards
  Hussein

• Install Oracle Application 12.2.4 on linux 7 step by step

  Dear all,

  I want to install oracle 12.2.4 on Red Hat linux 7

  with step by step 12 c databases.

  Concerning

  Try this

  Rename the existing repo

  # mv public-yum-yum-public ol6.repo - ol6.repo_old

  Download the public yum repo

  # wget http://public-yum.oracle.com/public-yum-ol6.repo

  Edit the file to activate the ol6_addons channel. Find the ol6_addons section and change allowed active = 0 = 1.

  Save the file, and then rerun the command yum install.

• How to install oracle on mac?

  I installed the next step in virtual machine to install oracle please someone help me I am a student and the teacher requirement is to install the oracle software is required for the Conference otherwise you will not sit in DB Conference Monday.

  Hello! First Oracle is a company, then perhaps you are referring to a specific software made by them?

  If its Java you do not need to put a virtual machine, it works fine on a Mac, and the installation process its fairly simple. What program or DK you trying to install?

• Steps to install the latest version of Peoplesoft on Windows

  Hello

  Can someone guide me with high level steps to install the latest version of Windows for peoplesoft.

  Thank you

  Patricia

  Hi Patricia,

  Yes, the steps are the same.

  Please only check if windows server 2012 is certified or not.

  I checked the same in support.oracle.com and it is certified.

  PeopleSoft PeopleTools 8.54 is certified Microsoft Windows x 64 2012 (64-bit)

  Thank you

  Yogesh P.

• install Oracle 12 c and migrate data from 9i to 12 c on Solaris

  HI: this is a primary control to check IAM step by step.  I need to migrate the server Oracle 9i (Solaris) to 12 c (Solaris) to the customer request. I have the instruction of installation YES from the team, the draft plan is:

  1. install Oracle 12 c binary on Solaris Server

  2 exp/imp, method to move data to 12 c 9i.

  Should I create a database "empty" by script until I use the exp/imp method to migrate data from 9i?  Or, is it better to use the option 'create the single database instance' in YES during the installation of 12 c, then exp/imp?  How about the "plug-in database" or the "CBD/PDB' concept to 12 c?  It's still new and I am not master familiar with it, that I have to use all "CBD/PDB' 12 c or not?

  Any problem that I need to know?

  Thank you very much!

  You have your point of disagreement, but it is the best approach of guys Upgrade Oracle, google for Mike Dietrich blogs on updates. And your concern that make upgrades does not allow you to practice, well, you could easily make a few tests on my upgrade on a test environment, I really don't agree with your point here...

  Sorry - but I agree with the ground.

  Anyone who still uses 9i has some questions SERIOUS architecture dealing with totally outside the DB and data. There is just too much features auxiliary available (e.g., ASM, GRID, EM) which did NOT exist in 9i or substantially changed.

  It is also a non-starter, IMHO, not to recommend as an upgrade to 11g without even knowing the 9i version that uses OP. A direct upgrade to 11g is NOT possible since the first versions of 9i. So if such a version uses OP they couldn't make a direct upgrade anyway. They will need first to upgrade to the last version 9i and then level it to 11g. Then, they should adapt to 12 c.

  Then you must take account of the need for BACKUP:

  1. PRIOR to starting to do something

  2. AFTER the upgrade to 9.2.04

  3. AFTER the upgrade to 11 g

  4. AFTER the upgrade to 12 c

  Compare that to the approach of that ground is recommended to use export/import. There is NO need to save the source DB at all since the process will NOT change. Simply a backup after upgrading to 12 c.

• Error while installing Oracle 11 g under Solaris 10 SPARC 2 forms and reports

  We are trying to install Oracle Forms and reports 11 GR 2 (11.1.2.2.0) 64-bit Solaris 10 SPARC 64-bit (U9) and we are facing errors of installation during installation of 11 GR 2 forms. I will note down the environment and steps reproduced to produce errors:

  Environment:

  Operating system: Solaris 10 SPARC 64-bit (U9)

  JDK: Oracle 1.7.0_79 64-bit JDK

  WebLogic: Oracle WebLogic Server 10.3.6 64-bit

  Form & reports: 11.1.2.2.0 64-bit

  Steps to follow:

  1. install JDK - success

  2. installation of WebLogic Server 10.3.6 (64-bit) and created a new home of Middleware. -Success

  3. ensure that all prerequisites are met by a prior information of Oracle: http://docs.oracle.com/html/E25460_01/r2_fr_requirements.htm

  a. all patches necessary OS and packages are installed

  b. There are a lot of disk space, swap, TEMP space and memory (RAM live)

  c. all environment variables are cleaned, as indicated in the prerequisites in the URL

  d. no other product Oracle doesn't lie in the path except for the JDK. (NOTE: Forms 6i is installed in a separate House in the server.)

  e. all software are 64-bit

  f. the user oracle (same user who has installed the JDK and WebLogic) has read, write, and execute permissions for the entire House of Middleware.

  g. we set the LD_LIBRARY_PATH variable to $ORACLE_HOME/lib as indicated in the Doc ID 1643548.1.

  4. start the installer of Forms

  a. choose 'install only - do not configure ".

  b. all the prerequisite checks passed

  Errors: Installation product until it reaches approximately 92% when we get the first error:

  "Error in invoking target 'nnfgt.o' of makefile '$ORACLE_HOME/network/lib/ins_net_client.mk'. See "$ORA_INVENTORY/logs/installDATE.log" for more details".

  If we click on 'Continue' to work around the error, we get another error after that:

  "Error in invoking target 'repeat' of makefile '$ORACLE_HOME/precomp/lib/ins_precomp.mk'. See "$ORA_INVENTORY/logs/installDATE.log" for more details".

  Someone has met these errors before installing 11 GR 2 forms (11.1.2.2.0) on Solaris 10 SPARC 64-bit?

  Thank you

  Scott

  We have solved the problem. The library of expr has not found in/usr/xpg4/bin but in another location. After you create a symbolic link in/usr/xpg4/bin pointing to where it has been deployed, the installation is completed successfully (after removing the previous attempt failed).

  A test you can do to make sure that expr is working correctly is to run expr 1 + 1 in the shell. If the command works, the library can be found.

  Matthew, I thank you for your suggestions as well.

  Thank you

  Scott

• Not able to install Oracle HTTP Server existing Middleware at

  Hello Experts,

  I'm not able to install Oracle HTTP Server in an existing House of Middleware, Weblogic. I installed Weblogic 12 c and tries to install SST 12 c in the House, same Middleware

  I am getting error below:

  INST-07551: not all depenedent go to the installation type "Colocated HTTP Server (managed through WebLogic server)" could be found. The following prerequisites proved to be missing: em_fmc - 12.1.2.0.0

  OS: Windows 64-bit

  Installation of Weblogic using jar generic wls_121200.jar

  Please suggest about same,

  Rajesh

  Hi Renon,

  In the 12 c version, there are two supported by Oracle HTTP Server domain configurations:

  • In a WebLogic Server domain
  • An autonomous area

  If you configure Oracle HTTP Server in a WebLogic Server domain, you can manage your instances Oracle HTTP Server, Enterprise Manager Fusion Middleware control, WLST and WebLogic Server Node Manager command line interface. To configure Oracle HTTP Server in a WebLogic Server domain, you must install the Oracle HTTP Server software into an existing Oracle Fusion Middleware Infrastructure Oracle home.

  If you configure Oracle HTTP Server in a standalone domain, Oracle HTTP servers reside in a separate autonomous area, which is intended to only manage system components. To configure instances Oracle HTTP Server in a standalone domain, installing Oracle HTTP in a separate Oracle home, and there is no prerequisite for Oracle Fusion Middleware Infrastructure.

  For details, see the following documentation: installing and configuring Oracle HTTP Server, 1 Planning Your Oracle HTTP Server Installation

  My understanding is that you want to install Oracle HTTP Server in a WebLogic Server domain. This means that you must first install and configure the Oracle Fusion Middleware Infrastructure software. Then you install the Oracle HTTP Server in the Oracle Fusion Middleware Infrastructure Oracle home, and finally configure you as part of the Oracle Fusion Middleware Infrastructure field.

  Distributions of products can come from either the delivery of software Oracle or Oracle Technology Network Cloud. See the download page of Oracle Fusion Middleware, Installation and Configuration of the Readme files.

  I think that the following note will help in this task: Note 1588516.1 - high steps on how to install and configure level located at the same place (Managed) SST 12 c on Windows 7 64 bit

  Kind regards

  Prakash

• FMW: Portal Upgrade Advisor - video part 4 patch the Oracle Home "how to install Oracle Middleware 11 g Rel 1 portal and discoverer" should specify to use previous pfrd Oracle Home

  NOTE: from 'build base Middleware of Oracle 11 g Architecture. "
  Review of the videos for "How to install Oracle 11g Rel 1 portal Middleware and discoverer?"
  Part 4 patch the Oracle home (04:57)
  https://support.Oracle.com/CSP/main/article?cmd=show & type = ATT & ID = 1118681.1:PD11G_INSTALL_PT4 & inline = 1

  The verbal and demo explanation does not use the original location/Oracle HOme of the previously
  installed for the binary PFRD base.   It probably should.

  In addition, for some steps to follow to patch binaries PFRD, I'd put it:

  Step 4.  I am guessing that the patch will establish an another sub dir Disk1 and don't want to overwright
  installation of the initial PFRD, therefore, moves the Group of hotfixes as follows.

  CD/opt/web/install/PortalUpgradeAdvisor/pfrd
  960 ls - ltr
  Group of hotfixes mkdir 961
  Group patches 962 mv p11060983_111140_LINUX.zip
  Group patches 963 cd.
  Unzip 964 *.

  RE: of course, having unpacked the group created patches another subdirectory Disk1 with his own runInstaller
  VNC gui:

  I guess, all we are doing is patching of binary files, nothing should be running.
  Maybe an environment set in same, as when we ran last the PFRD install, however.  There we / I had
  run. / set_mid_clean after making sure the files property was oracle: oracle.

  Yes, VNC gui and
  / opt/Web/Install/PortalUpgradeAdvisor/pfrd/Patchset/disk1
  . / runInstaller

  Here again, we select Install Software - is not configured
  RE: Get the message again on this screen "installs the software only. After said is finished, use
  config.sh at ORACLE bin directory to configure the working bodies of these components installed.

  Specify the installation location.  Always to
  Oracle Middleware homepage: / opt/oracle/Middleware
  and
  An Oracle home directory: as_2 # I bet it must be as_1 because that is where the initial PFRD install binary files has occurred.

  NOTE: The summary of the Installation in the video screen escape the Oracle Home is the previous specified during the initial installation. That is to say. PFRD_Binaries.   I guess I should have named that instead of taking the default as_1. At least I would have to have done that.  Well.  Maybe this story might help the next guy.

  Also

  NOTE: The Installation screen is not "from" group of patches as in the video where it says
  Install Oracle Portal, forms, reports, and discover the Group of hotfixes.
  

  Hi Charlie
  I'm a little confused by this feedback. Especially when you say that you see the option "install - do not configure. Should this option is visible only when you run the Basic 11.1.1.2 PFRD the software installer. The Group of hotfixes 11.1.1.4 has his own 'runInstaller'... and this will display what you see in the viewlet. You definitely run the installer from the directory of stage in the Group of hotfixes? (I'll do my own validation test - if I find something strange going on... I'll report.)

  I now take the following action

  1. I will put the Viewlet so it is clear that the Group of hotfixes is staged in a different place from the base 11.1.1.2 media
  2. provide that nothing must be running (because at this point, no instance of 11 g of construction has been configured)
  3. There's a "slippage" that illustrates the Middleware and Oracle Home entries in the screen "Location of Installation to specify" IE

  Middleware homepage: / u01/alca_portal/middleware
  Oracle home: PFRD_Binaries

  However, you will see that this slide for 2 seconds (which is an error) and if you miss it probably.

  Just FYI - the House of Oracle 11 g correction is in general the same procedure as patching a mid-layer House AS10g i.e

  -You set the Oracle Home base using the installation of the basic software program
  -You patch the Oracle home using the installation program of the Group of hotfixes

• FMW: Portal Upgrade Advisor - review of videos on "how to install Oracle Middleware 11 g Rel 1 portal and explorers.

  Configuration - upgrade the test system - 'build base Middleware of Oracle 11g Architecture'
  Review of the videos for "How to install Oracle 11g Rel 1 portal Middleware and discoverer?"

  Part 3 installation of the basic Oracle Home (10:40)
  https://support.Oracle.com/CSP/main/article?cmd=show & type = ATT & ID = 1118681.1:PD11G_INSTALL_PT3 & inline = 1

  RE: NOTES: so it seems that do us step 4 [update software/binary in the ORACLE_HOMEs] here
  instead of step 3 [install but do not configure Oracle Identity Management] starting from
  'Build base Middleware of Oracle 11g Architecture'.
  Maybe suggest to change the documentation in MOS Advisor upgrade,
  to remove step 3 until after the upgrade the binaries and install patches 11g group.
  Or change this 3/4 part to talk to install IDM.

  
  Part 4 patch the Oracle home (04:57)
  https://support.Oracle.com/CSP/main/article?cmd=show & type = ATT & ID = 1118681.1:PD11G_INSTALL_PT4 & inline = 1

  RE: NOTE: it looks like a typo/read error on the page that says "necessary to run the Wizard Patch (PSA) Set?"
  There, it says '... If the Group of hotfixes version UCR has been used, no action is required. "I think that it should
  say «...» If the Group of hotfixes RCU version was NOT used, no action is required. »

  
  

  Part 5 running the Configuration Wizard (08:50)
  https://support.Oracle.com/CSP/main/article?cmd=show & type = ATT & ID = 1118681.1:PD11G_INSTALL_PT5 & inline = 1

  Specify the Application FOR page/section: you must specify OID information for installation of the portal.
  If you do not wish to integrate oracle descoverer services and do not want single sign - on, uncheck the box.
  RE: NOTICE: verbal instructions on this boy, are confused.    Instructions on where to get information from the OID would be useful
  here. in addition, the instructions show that if you have specified use of discoverer, a check box is displayed and check
  That's if you want to use the SSO on.   A blurb on what if you did NOT specify discoverer would be appropriate here.
  Or something about this discoverer is and if it comes by default with the installation.

  First, as discussed in another thread, I plan to reformulate the wording of this step... so thanks again for your comments.

  Note on this question / comment

  "To understand at the time where we upgrade repository portal.  In my opinion, who runs the configuration wizard PFRD is that fact for us.  I will go through the video.    And me who runs the IDM upgrades OID configuration wizard. »

  PFRD Configuration Wizard does not upgrades the repository of the portal, it creates just a portal 11g AS Instance against the repository Portal 10g's existing. The Upgrade Wizard upgrades site two-step

  1 put Update Wizard (option "upgrade intermediate level Instance") upgrades 11 g base instance configuration so that it matches the source portal AS10g instance configuration

  2 Upgrade Wizard (option "Upgrade the repository in metadata schemas") upgrades the repository Portal 10 g.

  It's a similar story for instant messaging, only the IM Upgrade Wizard upgrades the configuration file system and the GI database schemas in a go (IE there is no upgrade wizard option separated to "Upgrade the repository in metadata schemas")

  I think that the Viewlet created the PFRD and IDM Upgrade Guides whether clear.

• How to install Oracle Database Audit Vault

  Hi all

  I have my database in oracle 10g in linux environment, I used to install oracle database audit Vault 10.2.3 Linux

  can any 1 tell me how to install it or what or the required steps.

  any useful link would be useful

  Thank you...

  Hello

  Please check: How to install Oracle Database Audit Vault - Yahoo video search results

  Thank you