L10W-B satellite - start mode of change to the CSM/Legacy

Similar Questions

• Satellite C645: There's changes in the strategy of cooling in BIOS v1.90?

  Hello

  is - that someone flashed BIOS from v1.60 to v1.90 recently posted.
  If so, have you noticed changes in the behavior of the cycles CPU fan?
  I mean, not the annoying problem of the processor fan runs from 0% to 100%, as RPM every 30 seconds (aprox.) have changed or remains the same?

  My laptop model is C645-sp4131L (14 "- P6200 2.13 GHz, Intel onboard video, 2 GB of RAM").

  Thanks in advance for your answers and excuse my poor English.

  I m not 100% sure, but I suppose you phone US model, right?

  Start the same thread on the Toshiba U.S. forum - http://forums.toshiba.com/t5/Laptops/ct-p/c_laptops/tshb
  Perhaps someone there are the same model and tested it with the new update of the BIOS.

  BTW: to reduce the cooling fan speed change please cooling method parameters. You can find it in the advanced power options > Toshiba power Saver saver > cooling method.

• Satellite A200-PSAE6E: what changed in the Bios 2.40 Vista 32bits

  Can someone tell me the release notes for the new Satellite A200 PSAE6E BIOS 2.40?
  In fact, the Toshiba never release notes on their BIOS updates.

  Unfortunately, I didn't find all the details on the changes to the BIOS on Toshiba European pages.
  I found a log file BIOS on the site Web of Toshiba us but Satellite A200-PSAE6E is a European model and I doubt that the news of the Toshiba page relates us to the A200 models.

• When a snapshot is complete, so I can start to make changes to the virtual machine?

  When I take a snapshot in merge, a progress bar appears in the window of virtual computer, then disappears in a few seconds.

  But a picture of a clock also appears on the Fusion icon in the dock. Only the clock takes a minute or two to disappear.

  What process is the clock?  What is the take a complete snapshot?  When the progress bar disappears, or when the clock disappears?

  Can I safely begin to make changes to the virtual machine, I want to be able to restore, immediately after the progress bar disappears?

  Or, it is more prudent to wait to make changes until the clock disappears?

  Thank you

  (The progress bar and the clock appear in my Fusion 3 that I use always happy... I don't know what appears in more recent versions).

  While the stopwatch turns, Fusion is busy writing the snapshot to disk, so the performance of your comments and your host could be reduced.

  As long as the performance isn't an obstacle, you can continue to use the virtual machine while the snapshot is taken.  Merger will ensure that the snapshot includes the exact state of the virtual machine at the moment, you started the snapshot: nothing of what you are doing inside the guest, while the snapshot is in progress does not affect the State of the socket.

  See you soon,.

  --

  Darius

• Satellite X 200-252 - changes to the new BIOS 2.50

  Tried to find information about this BIOS update. I have updated to version 2.50 but can not see the changes. Only when the update finished cooling fans started to work very fast for a second and then it just restarts. Now the coolers works as before, no change. So what is the purpose of this update?

  Everybody knows what this update corrects?

  Hi last,.

  Not every update BIOS offers more options in the BIOS. Above all, these updates correct various problems with your laptop and doesn't add new features (only sometimes). So this update should only be done if you see problems with your laptop, if not it s is not necessary.

  After the BIOS update on my laptop the fan works also very fast but only a few seconds. I think it is normal of the restart procedure.

  Last but not least BIOS changelogs can only be based on Toshiba's website - if they available (for the public).

• Start screen of change for the next launch of the program?

  Is it possible to change the boot screen so that it is different the next time that the user starts my application?

  N °

  Start times for apps should now be less than 1 s, however, at least if organize you them carefully. You could implement a custom splash screen, as the launch of the app, but right after the system and change from time to time.

  Personally, I hope not to see many screens of startup, unless maybe it's a unique thing, or a time-measuring for a really great application that is already expected to take a long time to load (for example some games).

• Start date of change for the employee

  I have an employee whose departure date was entered incorrectly. The system will not start date change which indicates that allocation changes exist between the old and the new dates.

  This is what the data looks like:

  Employee has been shown as hired August 1, 2014.

  An assignment was made for 1 - August to August 2, 2014.

  A second tour there on 3 August 2014 and the end date is 31-Dec-4712

  The start date must be changed in August 16, 2014.

  Two assignments seem to be a data entry error.

  Is there a way to accomplish this change? Since the two assignments are in error, there is not need to exist.

  Any help is appreciated.
  

  Datetrack on August 1, 2014 and go to the screen for the assignment. Use the remove menu icon and a popup asking if you want to delete all future changes...

  Once you remove the future recordings, you will have a unique assignment record.

  Navigate to the file and replace the most recent start date August 16, 2014.

  Hope that helps.

• Satellite M30-S309: cannot change on the local network adapter device

  Hello

  My name is Sebastian and I have a Satellite M30-S309 I can't configure IT the Connection WiFi.
  The drivers its OK (and reinstall) the LAN, but the WiFi RADIO network ok is OFF, have any opportunity to step ON this Board?

  I reinstall the KEYBOARD shortcut, but I think that the app or utility for the Fn + F8 key and the LED does not.

  Any can help me?
  Thanks in advance,

  S.

  You said the LAN is ok, but are you sure that the wireless network adapter has been installed on this laptop. Please check in the area to network adapters Device Manager.
  If the wireless network adapter has been installed, you should see the wireless network card in this area. As much as I k now the Wlan switch on the front of the laptop works only if the wireless network adapter has been placed.

• Satellite Pro L300 - Dual boot with the AHCI mode

  Type of product > Notebook
  Family > Satellite Pro
  Product series > Satellite Pro L series
  Model > Satellite Pro L300 24L
  Model short-term > PSLB9E

  Hello.

  XP and Seven is installed in dual-boot on my laptop and I use EasyBCD to choose which system I want to start.

  To start XP, I need to enable "Compatibility" (Controller SATA in BIOS mode) and seven is "AHCI" must be activated.

  Is there a way for my two OS was started without making changes in the bios?
  Y at - it an update to correct this problem (or alternative)?

  Thank you in advance.
  Marc

  Yes you can do it but I'm afraid, you must reinstall Windows XP Home edition m.
  Why? Because before beginning to install Windows XP Home edition, you must change it to AHCI mode, launch the installation of Windows XP Home edition and before you start you need to load the SATA driver (via F6 I think).

  Long time ago, we have discussed a lot about this on this forum then use the advanced search anc check options other postings on this subject.

  By the way: check http://aps2.toshiba-tro.de/kb0/TSB7B020R0000R01.htm

• Satellite M50 does not start, go back to the screen with different start modes

  My Satellite M50-130 does not start correctly. When you turn it on, it goes to a black DOS screen, saying: "We apologize for the inconvenience, but Windows did not start successfully. A recent hardware or software change might have caused this. "It offers me different start modes: Safe Mode, with networking and command prompt. Last good Configuration known; and start Windows normally.

  I tried all the 5 options, gets the commissioning insofar as the Toshiba screen, but then with all the options, it returns to the initial screen offering the 5 modes of starting. Same thing happens when laptop works again.

  The only recent software change, I've done was an update to Norton AntiVirus/Internet Security and I suspect that Norton is at least part of my problem, see history below. I know it's the Toshiba support site, but I tried Norton so many times without success, I gave up. Plus, I'm no expert at all, so I can't be sure that it is really the source of all my sorrows. All advice welcome!

  The performance of my laptop has deteriorated seriously in the last two months. She is extremely slow, and cleaning of malware and unwanted General does not help. It began right after that I renewed the license of Norton last year and upgraded to the 2007 version. The worst downturns are always connected to direct upcoming Norton upgrade programs. I disabled the live upgrade, but programs always come to the top, and I can't stop them, a popup tells me that they are protected.

  Wireless internet is also very capricious, even if another computer on the same network works fine.
  During the last week, I had to relax a little internet security settings (from "moderate to severe" to "low to medium") because after an other update of Norton AntiVirus, I couldn't access to interactive Web sites.
  It is perhaps a coincidence because Norton AntiVirus comes with updates at least twice a week - but what else could be the problem?

  My apologies for the long rant, I am grateful for all the advice!
  Thank you
  I have.

  Hello

  I think the only way to make your system works correctly again is to restore with the cdrom of onboard catering. Simply manage to save your data from your hard drive (the best way would be to put your machine's HARD drive in a USB - HDD enclosure and copy important data on another computer), then wipe the system completely off you hdd.

  After that, the system must run again...

  Welcome them

• Re: Satellite started to freeze - in safe mode, everything is ok

  I was meet a lot of problems and I think it's vista, that's why I'm posting here.

  Well, I had recovered my laptop for "out of the box" staged when my laptop could not detect any connection internet, everything began to work properly. Soon, my laptop started to freeze, and I thought that maybe because it was getting too hot.

  I decided to put my laptop closer to my fan and an angle to cool. Things went better that and so I thought everything was fixed.

  I now have a different problem.
  Just when I thought that the reason for freezing was overheated, it is happening again.
  I have my internet explore and itunes radio turned on and then my music starts jumping and stuttering and the mouse and all the rest is frozen.

  I'm not sure it's the same as when my laptop was getting hot because I had not put on then music.

  I know it's a little confusing and I have not provided many details but I would appreciate if I can get some advice.

  I intend to retrieve my laptop again within the next two weeks when I get home.

  Thank you

  It looks a bit like a hardware problem.
  But first of all that I would like to know which laptop model you have?

• Satellite Pro M70-113 does not start up - it hangs at the logo screen

  Hello

  I have a toshiba satellite pro m70-113.

  Sometimes when my laptop turns off mode standby automatically, due to inactivity and then if I press a key on the keyboard to wake up nothing happens and I have no other choice but to it stop completely by pressing the button for 5 seconds.
  But when I restart it works well, that is to say, it starts very well.

  But today, when it is in a similar situation, I restarted the laptop, the screen move after the logo screen toshiba. I have the power on several times, but without success. It crashes just on screen toshiba logo.

  After a few restart I pressed ESC while restarting and the toshiba logo changed to the texts POST bios screen.
  And I found that the text will not go forward after having reached:
  Find disk 0:
  Maybe default feel HDD initialization...
  The captured image is here:
  http://img144.imageshack.us/img144/9986/image007sp2.jpg

  Note: this is a capture when, I don't know how the system has just begun works very well and can be seen that the HARD drive is detected normally this time. While the earlier version, it will not proceed after having reached "Found Disk 0:

  So, the problem is that at the time of the problem, the hard drive was not read / initialized or something like that.

  And I remember that when I tried to reboot my laptop and it did not work. It was running on battery and when I switched power supply that worked.

  So it is a problem that has been fixed in a bet to update BIOS, but for another laptop (see laufendspass post) his link on this forum is here:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=13143&MessageID=48143

  And my current bios version is 1.1 and an update is available for v1.30... (But I have not yet updated)

  Another problem I had met some time was same this post mentions to be corrected during the update of the bios.
  i.e. "corrected: a computer that is turned on to State power and running on battery power, may crash if the user is connected to the AC adapter while it is start.»

  So, for this, all mean that these problems can be solved by an update of the bios v1.30 which is available for my Satellite m70-113?

  Please answer.

  Hi Ashish,

  The fact that the initial POST process cannot access your hard disk suggests you that there is a possible problem with the drive, maybe he is not in place correctly when power is applied to it. The contents of the disc should be OK, then I suggest you take a good backup of your system (or at least your personal data) If you manage to get your notebook to boot successfully.

  I do not think that an update of the BIOS will affect any on that since the problem does not seem to have a certain 'trigger', and if the BIOS cannot access the hard disk then no matter what version of BIOS you are using.

  Kind regards

• Satellite A100-590 PSAA9E freezes on the Toshiba start screen after BIOS update

  Hello.

  Yesterday, I made an update of the BIOS on my Satellite A100-590 PSAA9E 03Z00QGR with the appropriate flash:

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 2 & selSeries = 153 & selProduct = 624 & langua ge = 17 & selOS = 10 & selType = all & yearupload = & monthupload = & dayupload = & useDate = null & mode = userMachines & search = & action = search & macId = & country = all & selectedLanguag e = 17 & type = all & page = 1 & ID = 58477 & DISO =-1 & driverLanguage = 42

  BIOS - 20070709111839.zip

  After flashing, the machine restarted automatically, but unfortunately it keeps now suspended from Thoshiba welcome screen. Also by pressing F2 or F12 will not change anything. It seems that the BIOS is damaged.

  I saw that in the BIOS package are delivered the two files (s10gm590.rom and s10pm590.rom) flash. But just the execution of the BIOS590MP.exe SanAntonion10 a .vbs script starts decides which automatically selects and loads a flash file. Maybe she chose the wrong?

  What should I do now? Is there a way to restore the BIOS, or do I have to send my laptop?

  Thanks in advance

  CARPET

  Hello

  sounds are really serious. Unfortunately, I can just give you the only clue you will get with each user here in the forum:

  Find the nearest authorized service partner (you can find one by using this link: http://209.167.114.38/support/Download/ln_byModel.asp)
  and bring your machine. In addition, you must explain the guys what happened so they can do something for you.

  Good luck buddy

• If you use firefox normally written or search for words in the search bar in the start page, it changes automatically to yahoo and giving results. How to remove this automatic function - change at yahoo. Remove the list of yahoo search engine has no effec

  ..
  How can it be possible not able to control own firefox search engine? How yahoo can make changes in the configuration of firefox and always change in yahoo automatically after doing search page of firefox?

  I did not any changes having yahoo as engine ever.

  Best regards
  J.Tuomi

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.org/KB/safe+mode

  Reset the pref browser.startup.homepage_override.mstone through the context menu by default on the subject: config page and close and restart Firefox to restore the on: default home page.

  • Open the topic: config page through the address bar
  • Type in the filter bar: mstone
  • Right-click on the browser.startup.homepage_override.mstone line, and then select: Reset
  • Close and restart Firefox

• Satellite Z930 - mode boot Boot CSM and grayed out on the value

  Hello

  Hope someone can help me please.

  I have a Toshiba Ultra Z930 friends book.

  When you start the laptop does not start it comes up with the meesage PXE - E61: Media Test Failure.

  It is a Windows 8 portable 3rd Gen i7.

  I can boot from Hiren'S and the hard drive is located and can be selected and all files seem to be intact.

  I went into the BIOS and found that the startup mode is set to MSC Mode.
  However, Windows 8 requires the for UEFI boot mode.

  I can't find how to change the boot of the CSM Mode in the UEFI.
  The option is grayed out and cannot be selected.

  Help
  Please

  Hello

  Go to the BIOS by pressing F2.
  Then put the BIOS on the default settings, save the changes and power the laptop off.
  Then switch on the device and access to the BIOS, once more the key F2.

  According to my experience, secure boot option must be available, and you should be able to change the startup mode UEFI/CSM layout too.