Still crashes when burning blu ray to disk image

Similar Questions

• Still freezes when the Blue Ray project tyrying

  I'm doing my first burn Blu Ray and am having some problems...

  I have my images and uses Dynamik Link to send to yet... when options still to come, here is what I have chosen.

  I move on to Blue Ray... change the size of 1920 x 1080, because that's what my videos were shot in

  I leave as MPEG 2 and let the pace to 29.97

  I do not touch the advance settings that are currently in the transcoding 15.0 Mbps... Digital audio transcoding Dolyb

  then it won't let me change the player... Adobe Reader

  I click OK and it brings my project in again... the only thing that's begins on page generate and he put on DVD by saying I used 3.78 GB... I have an hour of footage, so this is not normal.  I'm going to change to Blu Ray on the generation and it freezes everything on my computer.

  I have a decent up... all plenty of space and food.  Any thoughts?   I need this for mother's day.  :]

  Yet Roxio component problem http://forums.adobe.com/thread/400484?tstart=0
  More and Roxio http://forums.adobe.com/thread/528582?tstart=0 or directly to
  http://KB.Roxio.com/search.aspx?url=/content/KB/General%20Information/000070GN¶ms

  Long File Names Cause crashing http://forums.adobe.com/thread/588273

  Yet tutorial http://www.precomposed.com/blog/2009/05/encore-tutorial/

• Still ignores recent changes created when burning Blu - Ray

  Hi everyone-

  When I change the detailed underlying film Premiere project file pieces, I take care of to save.

  At the opening, still, I'm going to project window (top left label) then highlight the relevant first project File.pproj, and then click on revert to the Original.

  When I burn a DVD, yet many transcoding etc perhaps spending an hour on this (an hour on DVD hardware) before starting to write.  So, he burns the latest version of the Premiere project file.

  BUT when I burn a Blu - Ray disc, still seems to "remember" the previous version of the project file underlying first, doesn't bother to do many transcoding, etc. and after a maximum of 5 minutes he began to write the disc - which then the precedent not the latest version of the first underlying project file.

  (Either by the way, I'm in CS5 and Windows 7 and did not have problems of major software so far.)

  I understand that if I start a new project from scratch, it will be important to the latest version of the Premiere project file and I did it with success on another project where the menu is so simple to recreate it is not a problem.

  However, on THIS project, I have a complicated menu, giving access to a long (with a submenu preselection of stage) and three film projects short first and so begin a new reminder of the project file and build a whole new menu with scene selections would be a lot of hassle, that I would rather.  Simply copy the project still would probably just in me the problem of the copy.

  Anyone got any ideas?

  Thank you very much

  Jan

  To make comic books, you must change the project type to BD. the build type, Yes?

  When you see in the comic book the type of transcode is transcoded, it means that you have not restored. Change the type of project in BD, then return to this asset.

• Error 'Could not create ac3' when burning Blu - ray

  I spent the last week, a reader Blu - ray in Encore CS5 design.  Combustion, they gave me the error message "Cannot create"_sessionfiles_Dsf_session_1_audio.ac3", and the burn failed (after going to seven hours).  I don't really know even where to start with this.  The Blu - ray is about 80% of the full (20 GB) and includes several chronologies and several menus (including audio).  No pop ups.  It should be a fairly simple project.  However, it gave me problems after the problem and has taken far too long.  Can anyone offer insight before I spend another week chasing the problem?  Thank you.

  Congratulations and condolences then!

  Either the burn was bad (the inability to check), in which case a reburn could fix, or you have a navigation problem, in which case you will need to fix this.

  You can navigate through the menu of the specific aspects? The action of the end of the scenario for the main movie is clearly defined in the menu special functions? In preview, but still on the main timeline, click the icon for "end action"; that works correctly?

  You can also try to play the image, and see if it behaves correctly (again showing a bad burn). The problem with this is that a) have you usually mount the image and b) some software players emulate correctly and a failure doesn't mean much. But if it plays properly, it indicates a bad burn.

  What third-party burning software has failed?

• Qosmio F60 - error when burning Blu - ray discs

  I have a Qosmio F60

  Recently, I tried to burn my data on BD - R 25 gb disc. Aftre burn about 6 GB of data, it stopped burning with unexplained error. I tried another disc with the same problem. This time the suggested message updated firmware. This is MY * A BD - MLT uj240ES blue ray player. I am unable to find any updated firmware update. Current firmware is version 1.10.

  Can someone help me on this

  Hey,.

  If a firmware update is available, you can find it on the official website of Toshiba:
  http://EU.computers.Toshiba-Europe.com

  If this isn't the case, you already have the latest version of the firmware.

  In your case, I recommend to test different brands of blu - ray discs. I have good experiences with Verbatim and TDK discs.
  Check this box!

  By the way: I prefer a backup of the data on an external HARD drive. It of safer and easier! ;)

• When a Blu - Ray burning are all selected by default different regions?

  When a Blu - Ray burning are all selected by default different regions?

  By selecting a region in Encore for Bluray has no effect, then Yes.

• HP Pavilion Elite HPE - 480t computer and burner blu - ray 12 x HP bd 340i

  Model bd340i in the middle of last year, I bought HP 12 x Blu - Ray burner. When I bought my HP Office in December 2010 model HP Pavilion Elite HPE - 480 t, I installed the burner and everything worked very well. Today, I tried to burn a blu - ray disc, and he returned with can't read media, which stood on imgBurn. So I tried the same thing on the burner systems, and she came back as no drive in the status bar. I have also tried burning CyberLink software and the same thing no disc.

  I then tried to play the two store bought and home made blu - ray disc and could not read media. I was ready to blame it on a bad burner but then I tried a regular DVD the two store bought and done House, and it plays very well. I then tried to burn a single dvd double layer with all the burning software three I have and it is still fine, no problem. It's just the blu - ray media that cannot be read or written. The only supports blu - ray, I used from the first day was Kodak and never had a problem. That's what baffles me.

  At this point, I don't know if it's a hardware or software problem with the computer or burner blu - ray or both. 3 different burning programs works fine on DVD but not blu - ray, DVD plays fine but can't play or burn blu - ray discs.

  Could this laser blu - ray crapped out and the dvd reading and writing laser still works?  Must a blu ray burner still lasers for both media (DVD and Blu Ray)?

  Everything else with the computer works fine. I even tried uninstalling and reinstalling and it is the same, I tried to update the drivers and firmware on your site and still does not work. Please help.

  When did you purchase your product? : December2010
  Product HP Pavilion Elite HPE - 480t CTO desktop PC
  Select a problem area: other
  What is your serial number (SN): [personal information deleted]
  What is your operating system? : Microsoft Windows 7 Home Premium 64
  Your computer is unable to work with Accessories products? Please select all the boxes. other
  What type and brand of CD/DVD media you are using? Kodak 25gig of Bu-Ray and dvd HP
  The CD/DVD writer burner was built in the computer when you bought it? NO.
  You hear the sound from the speakers connected?
  The display on the product seems to work correctly? Yes
  Have you connected the product to your TV, DVD player or a music system? NO.

  If there is an error message, please specify: cannot read media
  Description of the problem: I bought burner HP 12 Blu - Ray model bd340i in the middle of last year. When I bought my HP Office in December 2010 model HP pavilion Elite HPE - 480 t, I installed the burner and everything worked very well. Today, I tried to burn a blu - ray disc, and he returned with can't read media, which stood on imgBurn. So I tried the same thing on the burner systems, and she came back as no drive in the status bar. I have also tried burning CyberLink software and the same thing no disc. I then tried to play the two store bought and home made blu - ray disc and could not read media. I was ready to blame it on a bad burner but then I tried a regular DVD the two store bought and done House, and it plays very well. I then tried to burn a single dvd double layer with all the burning software three I have and it is still fine, no problem. It's just the blu - ray media that cannot be read or written. The only supports blu - ray, I used from the first day was Kodak and never had a problem. That's what baffles me.
  Please provide previous steps of troubleshooting, or information that can help HP help you. : I don't know at this point if it's a hardware or software problem with the computer or burner blu - ray or both. 3 different burning programs works fine on the DVD but not blu - ray, DVD plays very well, but can not play blu - ray.
  Nothing changed since the device was working properly (installation of SW, settings, wiring, etc.): everything with the computer works fine. I even tried uninstalling and reinstalling and it is the same, I tried to update the drivers and firmware on your site and still does not work. Please help.
  How would you describe your level of technical skill? : intermediate
  First name Peter
  Name, first name rider
  [Personal information]

  Arcticwolf, sorry, I miss read your post details. That strangely resembles a failed drive. Try unistalling and reinstalling the drive, including the software and driver. If a problem has occurred, it may fix.

• CS5 will still support the MCE Blu - ray on Mac Pro Player?

  It's basically my question:

  CS5 will still support the MCE Blu - ray on Mac Pro Player?

  It is y harly any info the hardware on the web site of Adobe support more. It's just all hype sales!  They used to tell you which disks have been supported, but now that still seems to just be an afterthought in CS5, there is not ehardware in detail everything that is taken in charge and what is not...

  This new MCE Blu - ray player looks like a wonderful solution, but only if Encore CS5 on Mac would support it.

  Thank you!

  I am positive that your Mac Pro has the connectors. The SATA cable it can be somewhat difficult if you're not comfortable deleting some parts with a screwdriver, but I found it very easy.

  Cables SATA sitting around, I had had a little long boxes on the ends of the connector forcing me to have to remove a small amount of plastic from the piece of fan housing. I think that if you buy a kit from OWC cable they include cables that are lower profile but whatever it is, it's not too bad. I just use a dremel to remove a small piece about 1 "x 1" directly above the ports. "

  Here are some instructions I found: http://www.newertech.com/downloads/nwtmpqxe32.pdf (Note: the pages in this guide are all mixed!) These guys here sell a kit that delivers these unused ports of SATA to eSATA ports.

  You will see that they have low profile cable I was referring to that and so they didn't need to cut the case fan at all. I would say just OWC (www.macsales.com), because they know what you are looking for and you can sell a kit that has the cables you need, including 4-pin-power to SATA power. I recommend you to install the two cables while you're here, so if you later decide to add another SATA drive or an SSD, you will not need to take off again. BTW, add an OCZ Vertex 2 60 GB SSd drive as my boot drive for the OS and applications has been the single most visible upgrade I did and makes the Mac Pro just smoke! Same value as I just pasted the small SSD up there in the optical Bay without a mounting kit, and it works great!

  In all honesty, theough, the external enclosure for Blu - Ray works well and is easier to access the drive, because it is now located on my desktop. If you're uncomfortable to disassemble your machine just get quadruple housing interface with the chip set Oxford 934DSB that I can guarantee you that it works out of the box. It cost $140 for the whole machine, not bad compared to the alternatives.

  The reader is this: LG WH10LS30. Looks like it's still on sale for Newegg $79 until the end of the year.

  Housing I have is the following: BYTECC ME535-Limited-BK. Another $60. The OWC, looks a lot prettier in a Mac environment but costs $40 more for the same features all in brushed aluminium.

  I've been creating and burning with yet but Roxio Toast 10 Titanium burns and the authors of the Blu - Ray just wanted to make a CD/DVD

  Good luck!

• First 14 will burn DVD but won't burn Blu Ray. On the same computer 11 first has no problem burning DVD or Blu Ray. Issue. Why dooes 14 does not. What can I do

  Can anyone help on why my first charge up to 14 will not burn Blu Ray but will burn DVD still 11 first on the same computer has no problems burning Blu Ray or DVD. ? Thank you. RB

  What operating system do you use?

  What brand of computer are you using (HP, Dell, etc.)? Have you spent at the web site of the manufacturer and installed the drivers from HP, Dell, support of any web site page? Sometimes drivers that Windows installs are not as effective - especially if you have recently upgraded to Windows 10.

  There may be other factors, but we will need a lot more information in order to solve the deeper problems.

• Firefox still crashing when I open Facebook page.

  Firefox still crashing when I open Facebook page and crash that appear just after the report is in Greek (?!) I have an English version of Firefox.

  Hey Pacovilla,.

  Do you by chance have the LastPass Manager as an add-on of Firefox?
  (You can click the icon settings at the top right and choose Add ons).

  If you do, try to disable it, or from Firefox with no Add-ons to see if it works.

  This add-on seems to cause problems with Facebook on Firefox.

• "Windows Media Player has encountered a problem when burning the file to disk"?

  "I ENCOUNTERD CE WHEN BURNING YEAR MP3 AUDIO CD AND NOW I wanted TO KNOW WHY IT WON'T WORK THAT IS THE CODE POPPING up" Windows Media Player has encountered a problem when burning the file to disk ' WHAT CAN BE THE PROBLEM

  Hello MactabardX,

  I try and remove Windows Media Player and then reinstall it.
  Uninstalling and reinstalling Windows Media Player:
  Step 1.
  Uninstalling Windows Media Player:
  1. go to start and in the search type "Turn Windows willing or not.
  2. click on "Turn Windows features on or off".
  3. search for multimedia and uncheck the brand in the face of Windows Media Player.
  4 restart the computer
   
  Step 2.
  Reinstall Windows Media Player:
  1. go to start and in the search type "Turn Windows willing or not.
  2. click on "Turn Windows features on or off".
  3. find the multimedia functions and place a check mark in front of the Windows Media Player.
  4 restart the computer.

  If you encounter problems with Windows Media Player, try to use the Troubleshoot utility to see if that fixes the problem.

  Open the troubleshooting Windows Media Player settings Troubleshooter by clicking the Start button, then Control Panel. In the search box, type troubleshooting, and then click Troubleshooting. Click View all, and then click the Windows Media Player settings.

  If the size of the .wmv files is too large, it can cause Windows Media Player to stop working.

  I try and remove videos from Windows Media Player library and test to see if the size of the files could be a problem.

  If please reply back and let us know if these steps helps.

  Thank you

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• When I want to burn a CD in Windows Media Player, it shows "Windows Media Player has encountered a problem when burning the file to disk". What's wrong? How to fix?

  When I want to burn a CD in Windows Media Player, it shows "Windows Media Player has encountered a problem when burning the file to disk".    What's wrong? How to fix?

  I tried several times to remove the selection to burn and create a new a new but it keep "Windows Media Player has encountered a problem when burning the file to delivery" appears what should I do?   What problem is it?

  Hello

  1. what file format you are trying to burn?

  2. have you made changes on the computer recently?

  3. What is the security software installed on the computer?

  If it's something you downloaded, it may be copy protected by DRM, in which case you may not burn it to a CD or DVD.

  Here are a few things to try:

  1. make sure that the disc is clean.

  2. try a different brand of blank discs.

  3. stop all other programs that are running.

  4. make sure that the hard drive does not use disk compression.

  I suggest that you follow these steps and check if they help to solve the problem.

  Method 1:

  Try to use the Troubleshoot utility to see if that solves the problem.

  a. open the troubleshooting Windows Media Player settings Troubleshooter by clicking the Start button, then Control Panel.

  (b) in the search box, type "convenience store" and then click Troubleshooting.

  c. click on show all and then click the Windows Media Player settings.

  Method 2:

  Select a recording speed (write) more slow for the CD burner.

  Change settings for burning a CD or DVD in Windows Media Player

  http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-burning-a-CD-or-DVD-in-Windows-Media-Player

  Method 3:

  If you have any third-party burning software, I suggest you temporarily Uninstall it and then try to burn the disc using Windows Media Player.

  Note: Reinstall the software after the trial.

  Method 4:

  Temporarily disable all programs that could activate themselves, while burning is in progress, such as screensavers or anti-virus programs.

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Note: Run the computer without antivirus software or firewall is a potential threat to the computer; Be sure to activate security software after completing the troubleshooting steps and after identifying the problem.

  I hope this helps.

• PRE9 - to burn Blu - Ray file available?

  Burning Blu - Ray in the record has been added to PRE9?

  See you soon,.
  --
  Neale
  Insanity is hereditary, get you your children

  Unfortunately, no, Neale.

• Yet 5.1 on OS 10.5.8 burn Blu - ray discs, but crashes during the generation of the same project DVD

  I spent a few weeks creating a Blu - ray disc double layer with 20 menus and 44 timelines lengths ranging from 18 minutes 9 seconds.

  The final product will be a double pack containing the replicated Blu - ray Disc and DVD.

  I have pre-transcoded DVD and BD and related assets proper. The Blu - ray Disc built properly and seems to have no problems.

  When I try to output in DVD Encore crashes almost immediately. I also tried to record just a DVD image, and it crashes at the same place.

  I don't really want to recreate this entire program in DVDSP, but that's my plan.

  Other ideas would be appreciated.

  Thank you!

  So I solved the problem by removing all the ac3 and m4v (including the related m2v) records on the SNA timlines replacing the original self-contained reference movies from FCP7. Then, I left still transcode and build from one day to the next, hop in the DVD to work one morning.

  Now, I just need to transcode again for the Blu - ray or return to a backup...

• Problems burner Blu - Ray (HL-DT-ST BDDVDRW GGC-H20L)

  I'm REALLY frustrated!

  My Pavilion d4999t-2 came with a disk drive BluRay & lightscribe (HL-DT-ST BDDVDRW GGC-H20L) I've used for the past two years... then 2 weeks ago the laser that burns CD - R & grilled LightScribe.  Fortunately (I thought), I got the extended warranty, so I contacted Hp.

  After going through the troubleshooting steps, I convinced that the CD-R/LightScribe laser has been burned, and he sent me a replacement (#1).

  When I installed the replacement drive, everything works perfectly, except it would not write BD - R (recordable BluRay) discs.  He would not even acknowledge that a BD - R was even inserted in the drive.

  Thus, after several "Troubleshooting" with assistance from Hp, they shipped another replacement (#2).  When I installed it, it could read AS CD & CD - R discs only!  He doesn't even have any disc BluRay or DVD was even inserted in the drive.

  Troubleshooting more (during which, according to their instructions, I lost all access to the command) and they ship me another replacement (#3).  This is the same as the first.... It can read/write CD and DVD and it will read a BluRay disc, but it does not recognize BD - R disc when inserted!

  After 2 weeks and 3-disc replacement, I am not officially frustrated!

  Of course, that are given to nine drives (the 'new' date I received is in Nov 2007), it seems that one who is to repair those disks does not a very good job!

  Has anyone else had similar problems with BluRay burner or get a replacement from Hp work?

  Mystery is solved

  It turned out that hp had the incorrect part description in their catalog of replacement

  All this time, they were send me Blu - Ray, not engravers READERS!

  After spending a few hours with a technician (Arkansas fortunately - I don't have to deal with an Indian accent most read a script), she shot to the top of my original and verified system control the original drive.  After comparison with the disc I had received, she found the error and put in a change order to get the fixed catalog.  I hope that nobody else will have to go through the problems that I had.

  Now a happy camper again