Still is the audio transcoding even if it's in the specifications

Similar Questions

• Tecra A7 still sees the AC adapter - even if not connected

  Hello

  I've had this problem for awhile now. It happened quite suddenly, one day it worked great, the other day and the following days later, it didn't. The problem is like this:

  My Tecra A7 still "sees" the adapter connected, even if it's not! This can be quite annoying if I turn the laptop on its battery, because it will automatically run on full power b/c of the Toshiba power management utility is installed. That said, running at full power, the battery is discharged very quickly. Beside that, if it is disconnected from the net power for some time, the laptop battery is draining, even if turned off all the time!

  Of course, the problem is not huge. I can always manage the electricity utility myself if necessary, but as you can imagine this probem is quite annoying. And I really want a solution to this problem.

  If someone knows the solution?

  Thanks in advance,

  Arjan

  Hello

  That means the power icon in the taskbar says?
  Have you noticed changes especially after connect/disconnect the power adapter?

  I think it might be a software problem
  I mean the energy saver.

  You he should remove the system and needs to be reinstalled the version downloaded from the European driver from Toshiba site.

  See you soon

• I dealt with this problem for months. Even hired a comp tech to fix it and still have the same question. There, nobody helping me?

  I dealt with this problem for months.  Even hired a comp tech to fix it and still have the same question.  I had my computer wiped and windows 7 and 8 then reinstalled by a professional.  This all started when I upgraded form 7 to 8.  After 7 to 8 my computer kept getting this error. . kept crashing.  He was supposed to be fixed and it still does the same thing. I was told then move to 8.1.  I have always the same coming error.  I'm not on computer.  IS THERE ANYONE WHO KNOWS HOW TO FIX THIS?  Someone who can explain to me step by step how to fix?  I've tried everything.  Error 0x0000005c [settings 000000000000800 0x000000000000000B x 0 0 x 0000000000000000 0 x 0000000000000000]

  Hello

  The upgrade to 8.1 was perhaps not the best thing to do...

  A lot of people are having problems with it also.

  If it is a desktop computer, have you checked the wall outlet and the plug on the back of the computer?

  Your point about starting the tone certainly as a power or a hard disk problem...

  The problem with you mouse pointer could be related to a feature called quick start...

  Your other problem also, perhaps... Try to turn it off and see if it helps...

  This feature works only when you make a STOP and then start.

  It is not perform a RESTART.

  Turn on or off...

  Go to the control panel... Power options, and then select choose the power what buttons on the left.

  Then select change settings that are currently unavailable near the top center of the screen...

  Lower on the window, uncheck the quick start.

• Encoded text with conditional compilation still tags appear in TOC even if the label is "excluded".

  I use TCS2, Windows XP.

  After you have created a book in FM and coding with conditional compilation tags, I imported HR. When I generate, I output the value tag:

  NOT NoOUtput AND NOT internal AND NOT printed - I want to generate my external, webhelp online help. And it works like a charm. Except that:

  • In the table of contents, I can still see the stars for the things that are "internal" - when I click on it, they're not going anywhere... but I don't want them to appear in the table of contents!

  It seems to exclude from the index and search. I don't know that miss me just a step, or something...

  
  Browsing the forums I found this... http://forums.Adobe.com/message/751847#751847 -I don't know if it is still applicable, because it seems to allude to RH6 (which is a bit far from the 8 HR that I use)...

  Any help is appreciated!

  TIA,

  Adriana

  @Daggins - that's what I was talking about! I knew it was there somewhere ;>)

  @adrianaharper - if it doesn't work properly in PDF files that you create on the FM band; what the TOC looks like FM? You're just pulling in HR when you import/link right? If the faulty internal topics are appearing in the table of contents of the FM, then expect them to appear in HR too. You must kill them, FM or kill them in HR.

• Thunderbird download the same message, off guard popstate.dat antivirus, renamed to old, still have the problem. Ready to upgrade to Outlook or another prog to mail.

  Read about other similar problems in the forum, tried the possible one - Disabled popstate.dat antivirus solution, renamed popstateold.dat, TB closed, reopened to he downloaded e-mails until the more recent with the problem and still trying to download it again and again. Can't download at the end, as refreshment shows always the same amount still on the server to download, even after downloading the same message several times. This has happened several times in the past months, with several duplicates, but not this loop continues. This is the second time in a week where this has happened. My first attempt to fix - I copied all the .msf files to the new location and uninstalled TB. Then reinstalled and back .msf files. He seemed to be ok for a few days, but now have the same issue. All windows updates to date, was updated to the most recent version of TB before it happens.

  Try to connect to your account via webmail and delete the problematic message.

• Guard saying adobe flash player needs updating, done 3 times, still have the same problem

  Keep getting an error page (Adobe flash player needs updating) have done 3 times, even a full download of new, but still getting the same message when you open an article on Yahoo7

  Adobe flash player would not be responsible. I loaded the Shockwave flash player and it works well. Must be a problem with Adobe.

• computer still displays the empty ink cartridges

  Every time I print, this dialog box appears. (I replaced the cartridges)

  

  It happened for a while now.  I continue to click Black only and it prints, as everthing I was need to print is strictly black.  However, now I am trying to print photos and I need color. I need to erase this message... but have no idea how.  The computer shows the levels correct as being complete... but still, I get this message ink and only on this computer.  On the macbook, it is not pop up and prints fine.

  Someone knows how to fix this?

  I have a HP all in one Photosmart C7280 running on Windows 7.

  Thank you.

  Hi gvchick03,

  Welcome to the Forums of HP Support! I see you amirouche get a print in black ink only error or to replace the Cyan and Magenta cartridges, but the ink cartridges are filled according to the ink levels. Have you ever set printing preferences to use black ink only or print in grayscale? Even if you select only one scale or gray black it still requires all the colors and all ink cartridges pull.

  Please take a look here and make sure that the preference is not affected in black ink only or grayscale. Refer to step 1:

  Impressions of color in black and white images

  Now, I would like that you remove all the cartridges and do a hard reset on your HP Photosmart C7280, see here: reset of the printer

  Once the printer is full initialized, please replace each cartridge one by one. Now, check the ink levels are they accuse even more complete? Try printing a test page, you still see the error message come?

  Now go ahead and run HP print and Scan Doctor- it has been designed to provide users with HP and features troubleshooting fix needed to solve many common problems experienced with HP print and scan the products related to Windows computers.

  Let me know the results, I can't wait to hear from you.

  Thank you

• Warranty void installed new HARD drive, but I still have the original?

  Hello

  I recently installed a new 200GB Hitachi HARD 7200 RPM drive on my laptop, I know that my warranty will be cancelled, but as I still have the original HDD safe and sound, the guarantee will still defend if say... the technicians were to come round to fix my laptop due to an unrelated issue, but see that the HARD drive has been upgraded; they will always fix the laptop even after I show them as the original? It's a long shot I know, but the 40 GB of HARD disc that came with the laptop only leave me little room after installation of Vista.

  At my upgrade COMPLETELY canceled my claim to the guarantee? Even if I just say... come back and install the original HARD drive in my system, just before the technicians come to my house? But that would be the same as if say... I just show the technician the original HDD on arrival while having the HDD Upgrade inside the laptop.

  A bit confusing, I know, but I'm in a quandary, because the guys from Toshiba are set to come around my place to watch my laptop under warranty, and I fear that they will fix my phone because I upgraded to a better HD and faster.

  Thank you very much, I hope someone answers.

  Hi Mohin

  I would like to try to clarify your question.
  The guarantee will be cancelled, if you you disassemble the laptop.
  I imagine that the laptop was equipped with a HDD slot at the bottom of the unit and you have to delete only one screw to remove the small cache connector HARD drive. Am I wrong?
  So in this case the upgrade of components such as the memory or the HARD drive will not avoid the warranty.

  But it s a good idea to keep the old HDD that were shipped with the laptop.

  Best regards

• Cannot install NI Multisim and Labview any version, still get the same error.

  Currently, I get this error message on these two requests. Would be very happy if there is a response. Windows 7 x 64, tried 64 - bit versions of applications that currently use and I still get the error. Thank you.

  

  George,

  Thanks for the file and the update. I'll work on the log file to learn more about the problem. Can you please check for me that made the

  C:\Users\Public exists on your computer? Take a look at this KB. Even if it's for VISTA, it might help you.

  http://digital.NI.com/public.nsf/allkb/24E09BDC314EB93A8625758D004ECBC6

  Kind regards

  Leila Feyz

  National Instruments

• Lost my Windows XP Media but who still have the keys of a broken computer. Can I buy another drive and use these keyboard shortcuts?

  So I lost my Windows XP installation disk... can I do this?

  I lost my disk of Windows XP Home Edition CD. Even though I have still two product keys for Windows XP Home Edition of two computers that are broken.

  Can I still use these product keys even if they have been recorded on the broken computers?

  If can I buy any disc of Windows XP in order to install the operating system?

  I'm looking at this one, where it says that it is Windows XP SP3.
  http://Minneapolis.craigslist.org/RAM/sys/3036303394.html

  I will also be able to upgrade to Windows XP SP3 to Windows 7 Home Premium? I have discs of upgrade for 32 and 64-bit with a product key.

  Hello

  1. who is the manufacturer of the computer?

  2. How have you installed Windows XP on your computer?

  3. you have Windows XP come preinstalled with your computer?

  If Windows XP was preinstalled with your computer, I suggest you to contact the manufacturer of the computer for Windows XP disc.

  Please see the links below.

  http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-XP-to-Windows-7

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=133

• How to recover missing files that are still on the hard drive. iTunes and VLC Player can still read the files.

  I had a restore of the system without success and now all my files (music, photos, documents, PDF files, vids, etc) are missing.  My itunes still recognizes the path to music and can play everything.  Same thing with VLC player and photos.   For example, if I go in VLC player and watch my playlist, I see that info a video is C:\Users\kevarendt\Desktop\Vids\... and the player will play the video.  However, I can't file my own.  He is no longer on my desk, where he was saved, but the path always displays it's there.  My drive is still in his usual capacity, so none of my files have been deleted.  I can't even to my user account.  All I see is a Public folder in C:\Users\.  What happened to my user account?  All the paths to my files have nothing to show, but it's still there but invisible.  How can I access it.  I use Vista Home Premium.

  Hello

  I suggest you to check that the same in safe mode if you work, try to perform the clean boot

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  If not work then suggest to activate the hidden files and folders and then check if it works very well.

   

• Lost product key, still have the installation DVD

  Hello, I have a bit of concern. I recently had to reinstall my copy of Windows Vista Home Premium on my computer due to a virus. Unfortunately, during the three years that I had been able to run my computer, I had misplaced my product key. However, I still have the installation disc.

  Now, I tried to activate my copy of Windows through the toll-free telephone service. The automatic activation system says that it is impossible to validate the code I had read it and redirect me to the customer service. Once there, a man, Joe, told me he would give me an activation code of 25 replacement characters, but since I couldn't provide him with mine, he will have to redirect me. Once I was redirected again, I didn't particularly understand what this other man told me. To my surprise, the conversation ended abruptly, and the call ends.

  The computer that needs validation has been custom-made. It has not come pre-configured with an activated copy of Windows. This DVD is all I have. Can someone suggest a good course of action?

  My sincerest thanks,

  David

  If the product key was installed on the computer, we could get it back with a software, but when you re-installed you erased it is is no longer available.  I'm afraid, there is nothing really that can be done - you need the product key to activate and Microsoft is not going to give you one just because you have a disk (or even if you have the receipt).  The same thing will happen to you if you try to activate without a valid product key.

  Here is Microsoft's policy on the replacement of lost or missing software (in this case, the loss of key product is essentially the same thing):http://support.microsoft.com/kb/326246.

  I'm sorry, there is nothing else we can do to help you - but without the product key you have little or no options.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Language Pack installed - programs install still in the old language?

  I have a Packard Bell Easy Note TS44HR that came with Windows 7 Ultimate, but in German. I installed the English language pack, and most of the time, I did not all important issues (some things to system info always show in German, startup, shutdown also in German).

  The biggest problem that I have been, is that sometimes when I install the software, the software installs in German. Which means when you use the software, everything is in German (menus, tips, etc.). This happen every time, but frequently enough. I have no idea as to why this happens only from time to time and not all the time? If I have the language pack installed, why even do all this?
  The last appearance was with Spotify. I tried downloading from the website American through a virtual private network, but that made no difference.
  Any suggestions?
  Thank you!!

  Hi Nemecky,

  Thanks for posting in the Microsoft community!

  I understand that your programs still shows the old language. I'll try to help you with this issue as soon as possible.

  (1) did you make any changes before the show?

  Install new MUI (MUI) in Windows 7 Ultimate:

  1. start-> all programs--> Windows Update--> optional updates.
  2. open the optional updates and go to the Windows 7 language packs.
  3. check the MUI (MUI) you want and click OK
  4. proceed to updates

  How to change the display language for Windows 7:

  1. go to start-> Control Panel-> clock, language and region / change the display language
  2. turn the display language in her choose a display language for the menu drop-down. 3. click on OK
  4 restart for the changes to take effect (this will affect only the user profile under which you are logged).

  Install or change a display language
  http://Windows.Microsoft.com/en-us/Windows7/install-or-change-a-display-language

  Let us know the status of the issue. I will be happy to provide you with the additional options that you can use to get the problem resolved.

• I still have the issue of permission after update latest version of LR

  I still have the permission problem after update latest version of LR even I already did what you suggest in the other discussion.

  I found the solution.

  You must follow the steps below:

  • Open Finder
  • Choose the menu go to, select go to folder
  • Type in ~/library and click go
  • Open the Application Support folder
  • Give full read and write permissions for everyone to the Adobe folder
  • Similarly, you have to give all the permissions file to Adobe location: Macintosh HD/Library/Application Support/Adobe

  I can made the order wrong earlier.

  Thank you all

• The frequency selection tool is still in the hearing?

  This tool is still in the hearing? I'm sure it was available in soundbooth

  

  Very useful if you try to remove a constant buzz of a certain frequency of an audio file.

  You can still select a narrowband audio in Spectral view using the marquee tool anywhere in the file. Pressing Shift + Home hearing will extend until the beginning of the file selection and shift + end will extend the selection to the end of the file.