Still unable to connect SSH ESXi 3.5 host

Similar Questions

• Unable to connect to ESXI 5 of vSphere...

  ERROR - "vSphere Client cannot connect to (IP/server) a unknown connection error has occurred." (The request failed due to failure of the connection. (Unable to connect to the remote server)) ..."

  Everything worked fine for several months, BUT now cannot connect to esxi 5 with vsphere client.

  of DCUI

  -network passes Test Management Network

  -Restarted network management

  -Management of Agents restarted.

  Worried about restarting a esxi host in the cases where I am still unable to connect with vsphere to launch the virtual machine (sbs 2011 running with rdp access)

  Help...?

  Can you ssh to the esxi host and verify pass and vpxa are running?

  status of /etc/init.d/hostd

  status of /etc/init.d/vpxa

• My computer connects to the wireless internet, but I am still unable to connect to internet even though it is always connected to the wireless connection.

  connection Wi - Fi

  My computer connects to the wireless internet, but I am still unable to connect to internet even though it is always connected to the wireless connection. How can I solve this problem and what could be the problem?

  Hello

  1 did you change your computer, after which the issue started?
  2. during how long have you had the problem?
  3. what web browser do you use?

  I recommend to update your network card drivers and check if that helps.
  http://support.Microsoft.com/kb/283658

  Let us know the status of the issue and also please answer these questions.

• I have an error msg "Unable to connect to the firewall local host control" is displayed when the system boots

  OS - win7 family Basic 64-bit

  anti virus-macfee
   
  Original title: I have an error msg "Unable to connect to the firewall local host control" is displayed when the system boots. MacAfee antivirus, 1 GB Radeon graphic

  McAfee has been updated at the same time as the last batch of updates from Windows 7 and it seems to be the cause of this problem for most, if not all, users.

  See the communication from this "criticism" - McAfee

  Some customers may experience a loss of network connectivity and/or errors in McAfee Security Center after a recent update

  You should make the fix McAfee, if necessary. There are corresponding communications for their enterprise products.

  I got McAfee, but the connection has started working again on its own so I thought I was clear of problems. However, when I checked it says he was doing routine checks the updates in vain when I told it to do a manually. So stick with McAfee you don't follow their procedure of fix would have upgraded my PC at risk by not updated and, like other McAfee ads have since explained, the application did not refer to its database of threats correctly [and this could explain part of the variability of the symptoms of failure but all involved loss of internet connection]. Actually, I removed McAfee then installed Microsoft Security Essentials rather & my answer IE is faster I knew it [even though I had the Add-ons McAfee disabled for centuries].

  I had to run the removal of McAfee Development tool a few times before and it caused a problem with the license if the PC was not connected to the internet during the abduction. Due cat of McAfee support reset their files in order to allow the relocation-reactivation. Here is their link cat - McAfee - media contains the link to the cat

• Unable to connect to ESXi 4.0.0 using vmrun

  Hello dear experts,

  I have a Linux machine where VIX API 1.10.1 is installed. I am trying to enumerate the VM available ESXi 4.0.0 machine with the following command:

  vmrun-t esx h https://10.x.x.x/SDK -u, p - xxxx xxxx list

  The result is:

  Unable to connect to the host.

  Error: Failed to send/receive data over the network

  Here are the logs:

  & gt; & gt; vixWrapper - 6207.log

  Sep 22 20:51:44.098: app-140105407071984 | Journal of the VixWrapper pid = 6207 version = 1 build = build-266898 option = exit

  Sep 22 20:51:44.098: app-140105407071984 | The process is 64-bit.

  Sep 22 20:51:44.098: app-140105407071984 | Host codepage = UTF-8 encoding = UTF-8

  Sep 22 20:51:44.098: app-140105407071984 | config points to the library which implements nonexistent ' / usr/lib/vmware-vix/server-1.0.9/64bit/libvix.so'

  Sep 22 20:51:44.098: app-140105407071984 | config points to the library which implements nonexistent ' / usr/lib/vmware-vix/ws_server_esx-4/64bit/libvix.so'

  Sep 22 20:51:44.098: app-140105407071984 | config points to the library which implements nonexistent ' / usr/lib/vmware-vix/ws_server_esx-4/64bit/libvix.so'

  Sep 22 20:51:44.098: app-140105407071984 | config points to the library which implements nonexistent ' / usr/lib/vmware-vix/ws_server_esx-4/64bit/libvix.so'

  Sep 22 20:51:44.098: app-140105407071984 | config points to the library which implements nonexistent ' / usr/lib/vmware-vix/ws_server_esx-4/64bit/libvix.so'

  Sep 22 20:51:44.098: app-140105407071984 | config points to the library which implements nonexistent ' / usr/lib/vmware-vix/server-1/64bit/libvix.so'

  Sep 22 20:51:44.098: app-140105407071984 | Vix library /usr/lib/vmware-vix/VSphere-4.1/64bit/libvix.so application loading

  & gt; & gt; VIX - 6207.log

  Sep 22 20:51:44.116: app-140105407071984 | Journal of Vix pid = 6207 version = - 1 build = build-266898 option = exit

  Sep 22 20:51:44.116: app-140105407071984 | The process is 64-bit.

  Sep 22 20:51:44.116: app-140105407071984 | Host codepage = UTF-8 encoding = UTF-8

  Sep 22 20:51:44.116: app-140105407071984 | Foundry Init: implementation of State comprehensive (0 topics)

  Sep 22 20:51:44.117: app-140105407071984 | Vix_InitializeGlobalState: vixLogLevel = 0

  Sep 22 20:51:44.117: app-140105407071984 | Vix_InitializeGlobalState: vixApiTraceLevel = 0

  Sep 22 20:51:44.117: app-140105407071984 | Vix_InitializeGlobalState: vixDebugPanicOnVixAssert = 0

  Sep 22 20:51:44.117: app-140105407071984 | Vix_InitializeGlobalState: vixLogRefcountOnFinalRelease = 0

  Sep 22 20:51:44.117: app-140105407071984 | Vix_InitializeGlobalState: asyncOpWarningThreshold = 1000000

  Sep 22 20:51:44.117: app-140105407071984 | Vix_InitializeGlobalState: enableSyncOpSelection = FALSE

  Sep 22 20:51:44.117: app-140105407071984 | Vix_InitializeGlobalState: enableExternalThreadInterface = TRUE

  Sep 22 20:51:44.117 : app-140105407071984 | VixHost_ConnectEx: version - 1, hostType 5, hostName https://10.x.x.x/sdkhostPort 0, options of 528

  Sep 22 20:52:59.372: app-140105405720848 | VIX: : VixTranslateVimException: received an invalid response error.

  Sep 22 20:52:59.373: app-140105405720848 | VIX: : VixTranslateVimException: error basicHttp/libcurl code is 48, translated into VixError VIX_E_NET_HTTP_TRANSFER (30200).

  Sep 22 20:52:59.373: app-140105405720848 | VIX: : VixTranslateVimException: response message is «»

  You have experienced this basicHttp/libcurl error code is 48, translated into VixError VIX_E_NET_HTTP_TRANSFER (30200) error before?

  Can you please give me a hint on how to defeat that?

  Thanks in advance for your answer!

  VIX is using libcurl to do the actual http traffic, so be sure that you don't have variables env (see the man page of curvature).  I discovered how hard that some distributions like to set these values in an unexpected way.

  I doubt that the message of locale is significant.

• Laptop has virus and still unable to connect to the Web site after his withdrawal.

  Original title: laptop cannot connect to router

  my daughter portable computer had bankerfoxa virus I think that I got rid of but she still can't connect on the website I want to download microsoft security essential on his cell phone how if I can not connect? pls help

  Hi trinidadg,.

  Also try the following steps, you have a problem connecting to the Web sites.

  Try to do a System Restore to an earlier date when your computer was working well and try to run a scan for malware removal.

  Try to reset the Proxy settings to connect to the internet, as some malware enable proxy settings that block your ability to browse Internet sites.

  To reset the Proxy settings:

  Click Start-> in "search programs and files" type CMD-> in the programs in the list right click CMD and click 'run as administrator '.

  In the command prompt, type the following and press ENTER:

  NETSH WINHTTP RESET PROXY

  Restart the computer

  Touhami

• Unable to connect to esxi using the vsphere client

  Hello friends,

  I need a little help.

  a 2 5.0 esxi host and a vcenter than VM.

  My laboratory worked well for days, but all of a sudden do not know why I am not able to connect to ESXi hosts with vSphere Client.

  Error: The request failed because the remote server has taken too long to respond.

  Call "ServiceInstance.RetrieveContent" to "ServiceInstance' server '192.168.1.101' object failed.

  Yes, I am able to connect to vCenter server, when it is connected to vCenter and open the console of the virtual computer, nothing shows up, it's a black screen, as if the virtual machine is turned off. It is with all the virtual machines on both hosts.

  1. I thought that it might have to do something with vCenter and I tried connecting to Host individually which I wasn't able to.

  After completing a few KBs on vmware and some articles, I checked the status of the firewall on both hosts. (attached screenshot)

  

  Checked if my computer can talk to esxi host on port 80, 443, 902. all ports are accessible.

  Disabled the Symantec endpoint protection and checked. no positive results.

  Finally, I tried the ESXi web navigation browser host http://ESXi-IP-address which redirects me to HTTPS connection with Certificate error, when I continue with the cert error, loading of the URL guard and the host page doesn't appear as it should.

  This questions are on both hosts. :-(

  You guys can point me in the right direction to solve this problem.

  Thank you.

  Finally things started working now.

  The problem was with the configuration of the workstation's NETWORK adapter.

  The link on the NETWORK adapter speed was set to Auto negotiate (default), but the speed was detected as 100 Mbps instead of 1 Gbps and MTU has been set at 9014 which I defined manually long back.

  Things use to operate in this configuration that I have configured hosts with MTU 9000 and cisco SMB switch default Jumbo.

  the LinkSpeed of 100 Mbps is bugging me, after changing to 1 Gbps (manual setting) the card NETWORK has deactivated, and it reminded me to switch!

  So I put the LinkSpeed Auto negotiation, MTU 9014, stop the two hosts, restart the switch. restarted my computer.

  Since it uses for things were in a normal state.

  Even the question of the console (black screen) disappeared. :-)

• Unable to connect to ESXi via vSphere Client after you change the setting LAN card

  Dear friends,

  I changed my setting of the NIC (from 100 M to 1000 M) via VMware vSphere Client. And now I can't connect to my server ESXi. Because I can not connect to the ESXi server, the network card user interface of the parameters provided by vSphere client is not available. How can I recover it? Thank you if someone could help it.

  Welcome to the vmware forum!

  Try this

  [root@server root] # esxcfg-NICS-s-100 d full vmnic0

  Of

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1004089

• Location of 'Events' seen in vSphere connected to ESXi 4.1 host?

  Hello

  When we open vSphere client to connect to a server ESXi host, there is the 'Events' tab shown at the host level.  I would like to know how to remove this log, please.

  I found this article (http://kb.vmware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1021801), but it doesn't answer my question.  I had deleted these files "message * ' and ' spend-*" files (files whose number names), but that's not all.

  I would appreciate if someone could tell me how to remove the old logs there.

  gallycool wrote:

  Hello

  Please check the under rental.

  / var/run/log

  It is the location where the old logs are stored.

  If the partition scratch has temp location then newspapers will be eliminated with a reboot of the host.

  If newspapers are in the temporary location, then the former location of newspapers is/temp/scratch

  If the scratch location is configured on a data store location, then the location of old newspapers is as below

  / var/run/log

  Please do not delete the present remove only logs logs rotated.

  Please do a ls - ltrh you can get the date and time of creation of the newspaper and also the size of the journal of.

  Please let me know if you need additional information.

  Thank you

  Sam

  There is no directory called "journal" under/var/run/in my ESXi server.

  The partition scratch is in the default location.

  I restarted the ESXi server and saw the former event logs have disappeared.  So apparently old newspapers of the events in this log "Events" can only be removed by rebooting.

• Unable to connect SQL Developer on APEX host Local workspace

  Hello world

  I'm very comfortable using SQL Developer. I installed Oracle XE 11 g. It included Application Express 4.0 and I downloaded 4.2.3 and manually updated. I have a workspace on the subject called TEST. I was wondering how I could connect to it and discover its tables using SQL Developer. I managed to get SQL Navigator to work with her.

  Any help will be appreciated.

  Hi 3030494,

  3030494 wrote:

  Please change your login username of "3030494" to something meaningful. Reference: Video tutorial how to change username available

  I'm very comfortable using SQL Developer. I installed Oracle XE 11 g. It included Application Express 4.0 and I downloaded 4.2.3 and manually updated. I have a workspace on the subject called TEST. I was wondering how I could connect to it and discover its tables using SQL Developer. I managed to get SQL Navigator to work with her.

  You cannot connect to the APEX Oracle using Oracle SQL Developer workspace, but you can connect with the schemas associated with the workspace and manage database objects in this schema.

  Reference: https://docs.oracle.com/cd/E55747_01/appdev.41/e55591/toc.htm

  Kind regards

  Kiran

• Unable to connect looking for addresses MKS:Host for server (server name) failed: host is known.

  Here is the situation.  This morning, I could go to all my virtual machines without problems.  Now, no dice.  I can ping servers and get an answer.  I can move the servers within vSphere client.  I can not remote in the servers.  Other administrators can get on the servers without any problem.  Is it local to just my vSphere client.  Any idea?  I'm a little lost.

  Thank you.

  Check your DNS. You can solve your desktop esx host server name?

  ---

  VMware vExpert 2009

  http://blog.vadmin.ru

• Unable to connect to the App Store since the upgrade to IOS 10

  Tried to restart App Store and phone. changed the password and recorded out and back in but still unable to connect. We will, get apps but when I try and download it keeps asking for the password and say that it can not connect. Someone at - it advice?

  Hello CT05,.

  Please ask for assistance with the App Store here in Apple Support communities. I understand how it is important to be able to download my new or existing applications on the App Store. Please try these things to see if we can get this to work for you as expected!

  The first thing we want to make sure is that all your data is safe. You can perform a backup to iCloud or iTunes. Use this article to help with this: backing up your iPhone, iPad, and iPod touch.

  Once you have your backup, please go to appleid.apple.com on your computer or via a web browser. Log in with the Apple ID you are trying to connect to the App Store with. If it connects, take note of the Apple ID and password. Try the same information on the iPhone.

  If this still does not work on the iPhone, please click Settings > Wi - Fi and turn Wi - Fi off. See if you can access the App Store on your cell data. If you can, it means that it some security on the wireless network that you are connected to that is blocking your connection. You won't be able to do this unless you use your cellular data or move you to a new wireless network.

  If you are not able to access the App Store on cellular or wireless data, please open this help article: If your iPhone, iPad or iPod touch connects to a Wi-Fi network. Check the section still not 'connect?' and look at the instructions to reset the network settings. What this does is actually reset some of your default network settings. You have to reenter your password to connect to wireless networks once this is done. Try again.

  Thanks again and have a great rest of your day.

• Unable to connect to the website of 'http', steam and App Store

  I use a Macbook Pro 13 inch, mid-2012 with OSX Yosemite 10.10.5. I had a problem with my network which I cannot connect to the 'http' site in Google Chrome or Safari. It shows ' site is not reachable, refused to sign, ERR_CONNECTION_REFUSED '. In addition, I can not connect to Steam and it shows 'code error - 102, unable to connect to the server. "Server may be offline or you cannot be connected to the internet". I can access the App Store, but most of the app doesn't load the image, and it seems weird that I cannot install or update applications from the App Store. It is said "we could complete the purchase. Cannot connect to the server'. Finally, I can connect to the Web site "https" as google.com, facebook.com, youtube.com, and apple.com. I don't know what I was doing before that happens because I'm not all of the firewall settings or IP network since I bought it. I don't even no matter what antivirus installed on my macbook. I do not think that the problem of my wifi because it works fine on my other devices. I try to fix but still have no luck.

  Here what I was trying to fix my problem:

  1. I try to restart the computer, then reconnect to my wifi - nothing fixed

  2. I have try to change the DNS 8.8.8.8 and 8.8.4.4 - still not fixed, worse still, unable to connect all Web sites

  3. I try to delete the Library/Preferences/SystemConfiguration folder and restart the computer - nothing has changed

  4. I try to start safe mode and it works very well and when I reboot to normal, it still happens

  5. I try to remove and re-add the Chrome in the firewall settings to allow incoming connections - nothing fixed

  6. I try to delete all the data navigation and cookies in Chrome and Safari - still not fixed

  7. I try to plug in the ethernet cable, as a first step, it works very well. Then, when I disconnected and reconnected again for the second time, and then he had the same problems.

  What I saw here, I check that iTunes had recently many updates with the same version of iTunes 12.4.1 since June 4, 2016 (1 time), June 5, 2016 (1 time), June 6, 2016 (2 times), June 7, 2016 (7 times), June 8, 2016 (2 times), June 10, 2016 (9 times), June 11, 2016 (1 time) and June 12, 2016 (1 hour). I don't know if this is normal or not because he had to download and installed about 24 times with the same versions! It is possible that iTunes is the cause of this problem? Any help and suggestions that can solve my problem? Thanks in advance!

  Is your date and time is set correctly? 5 minutes from the perfect?

• NB100 - see network wireless, but unable to connect

  My girlfriend has removed the Atheros driver on his NB100. I just reinstalled the driver of this forum and the wireless icon is back in the lower right. I however still unable to connect to wireless internet and am use to operate the wireframe.
  Free configuration can see the wireless network but will not connect and windows said: there is none in the range.

  Help, please!

  Hi ig88uk,

  Please check the contents of the forum on the problems of WIFI. You will find hundreds of questions and I think that already is written here in the forum.

  I searched a little and founded this:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=49920&TSTART=50
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=51858&TSTART=0

• Re: Satellite L300D - unable to connect via WiFi network

  Any help please? -I just L300D with Vista professional.
  Crossed troubleshooting but still unable to connect via the wireless network - no probs with other laptops.

  When going through "Toshiba assist" message arrives "this wireless network device is disabled.

  Please activate the device"- button wireless is activated with light yellow?

  any ideas?

  Are you sure that the laptop wireless switch is on?
  Look in the Device Manager. Maybe it's the wireless network card disabled. So activate it.

  Also try an update of the WLAN driver. You can find it on the Toshiba site:
  http://forums.computers.Toshiba-Europe.com