Stocker-usb

Similar Questions

• FUZE 8 GB will not play through a usb cable, passage in charge mode

  Is it possible to plug a USB cable into the ROCKET and make him play through it?  I have an FM transmitter in my car with a remote control, but it works only if connected with a USB cable. I now use it via the headphone jack but want to use the remote control. I just upgraded to firmware hoping it was a bug, but will still support once the USB cable is plugged. Thank you

  I'm not sure what you mean by "Play through the USB Cable"

  Inside that cable companies have four sons:

  Two provide 5 volts, which will load the "rocket" but still allow him to play.

  Two others are the USB data lines, which will allow your PC to read and write data files.

  While these are connected the "rocket" appears as a storage device and play any music.

  There is no audio cable in the USB cable stock.

  When I connect the "rocket" in my car, I have only power connected, it plays music very well and recharges its battery too.

  Even if the "rocket" is connected to anchor the Sansa, you can not play music if the USB cable is connected to

  a computer. There are additional connections in the 30 dock connector line out pins, like headphones

  selector and a few pins communications for the remote, but the stock USB cable does not work

  touch these extra pins. So unless you have a Sansa dock, or maybe one of the Altec-Lansing dock units.

  You probably don't have access to people.

  I hope that helped.

  LyleHaze

• HP Pavilion DV6535ep power Jack / USB module compatible numbers

  Hello

  My HP dv6535ep has recently begun to turn off randomly. At first, I thought it was because of the temperature of the CPU/GPU but then discovered that he was in fact the power jack which became very hot and it has partially melted. I completely disassembled the laptop and inspected the power Jack / USB module and not found other flaws that a charred soldering point corresponding to the + 19V input line. I tested the power cable and the PCB board for short circuits, there is everything. I also tested the diet that works. Since the tip of electric power cable have significantly melted, I replaced with a new cable and assembled the laptop again. However the problem persists, with the new power supply tip, the tip and connector instantly becomes very hot when the laptop is turned on. The laptop does not even pass the BIOS/POST, she shut it down. For completeness, I will add that the blue power jack light is on once I connect to the edge of power.

  So in summary:

  * After you turn on the laptop, the DC power connector tip and jack become very very hot in a matter of seconds (point melt the end if not immediately disconnected).

  * The power DC jack light is on after plugging in the power.

  * The laptop often depends not at all and when it does, it stops during the BIOS POST.

  * The power supply is working (I have tested) and the power cable and points work too (I replaced with new parts).

  Then, leading me to believe the power Jack / USB is defective and must be replaced and that's the reason why I am writing here in the first place. You would be so kind and provide the power Jack / USB board of part numbers that are compatible with my laptop? Current reference number (defective) power Jack / USB card is

  DDAT8APB3002907

  I have difficulties to find exact matches on the surplus stores, where the best that I got is DDAT8APB300XXXX, where the last four digits do not match. Are they compatible?

  In hoping to hear talk about you,

  Thank you

  -Angelo

  PartSurfer information:

  446524-001 in stock USB ports and card power connector - for connection of adapter CA 90 watts RoHS: change	40,38	0.00	40,38
  449454-001 in stock USB ports and card power connector - for connection of 65 w AC adapter RoHS: change	40,38	0.00	40,38

  You'll have better luck he is looking through the references above. The price seems a little dirty to me and you might have more luck on ebay or a House of rooms online.

• Is also the option "Remove USB Drive" supposed to clear stock that webOS Fund wallpapers and ringtones?

  I was just wondering if the Palm Pre 'Clear USB drive' option is supposed to erase the stocks wallpapers and ringtones too? I recently tried this, fortunately after all the PRE USB key backup and he did clear all multimedia files including the stock ringtones folder and folder of wallpapers. In addition, I'm guessing memos aren't text files because the memos are still showing after the clear operation? I tried to search for all messages indicating information about what this option doesn't really have, but there is not.

  @solentice:

  Yes, clear USB stick does exactly that it erases all saved on the USB part of the device, including wallpapers and ringtones, as well as the formatting, a memory stick or thumb drive.

  Memos are considered PIM data like contacts, calendar and tasks and are stored in the Palm profile. They are not deleted by erasing key USB. If you had to do a wipe Apps & data or a full erase when you register in your profile, they will be re - download to your device. Text messages don't re - will not download because they are not stored in the Palm profile.

  Here's a useful site to help determine what information is stored where:

  http://KB.Palm.com/wps/portal/KB/common/article/19388_en.html

  Hope this helps,

  TreoAide

• MacBook Pro not recognize Flash Drive/USB

  Hi all

  I'm reading the display, but I am still having problems with the connection of external drives directly (to the two USB ports or over the network).

  More recently, I got a new USB Flash drive that can connect to my iPhone, iPad 12 "Pro and even my older laptop Samsung Galaxy AND when connected to a PC, they all read, I even downloaded and installed the app on my iPad and iPhone to read and use the drive (drive Mobile, i-USB-Stocker).

  I have Apple Care and reached out to their troubleshooting why and was advised that if he isn't an Apple drive, unit of time machine, or essentially bought in a store so that they will not support it.

  I use and hub USB external to add other readers USB, and these work fine.  I have looked at the system report and think I found the device, but do not yet appear on finder or display on the desktop like any other.

  Product ID: 0 x 6998

  Vendor ID: 0x0b27 (Ritek Corporation)

  Version: 1.05

  Serial number: FB5BB61E

  Speed: up to 480 Mb/s

  Manufacturer: generic

  Location ID: 0 x 14240000 / 17

  Available current (mA): 1000

  Current (mA): 200

  Additional operating current (mA): 0

  Capacity: 63,44 GB (63,438,848,000 bytes)

  Removable media: Yes

  Removable drive: Yes

  BSD name: disk2

  Partition map type: MBR (Master Boot Record)

  Volumes:

  WORKINGFILE:

  Capacity: 63,44 GB (63,437,672,448 bytes)

  Available: 14.69 GB (14,692,286,464 bytes)

  Writable: Yes

  File system: MS-DOS FAT32

  BSD name: disk2s1

  Mount point: / Volumes/WORKINGFILE

  Content: DOS_FAT_32

  Volume UUID: 102893CC-83F6-324B-AFD1-8233E4579C35

  Any suggestion would be appreciated.  I've been a MAC user for a total of 3 months and having a good time with the passage of PC, but it's very disturbing.

  Thanks in advance for the help.

  If you go to Applications/Utilities/Disk Utility, the fact the drive?

  See article 1 article linked.

  Disc disassemble using Terminal Server

  Fixing strength disk-disk utility

• It is admissible and compatible to recharge an iPad 12.9 "Pro of a 2. portable usb plugs block 1a (as MAXOAK 36, 000mAh)?

  I don't know if there are any disadvantages or warnings to harming the internal composition of the iPad to 12.9 "Pro if different USB ports are used (for example by using a 1 2 a USB).

  Anyone know if the iPad Pro has a detection of the type of output USB mode? and if so, to adapt to the USB output without injury or damage or void of warranty etc..

  In short, what is the type/kind of USB (#. #A) 'safe' permit to charge the iPad Pro... in other words, are there consequences to recharge the iPad Pro from any old USB port or are we limited to the macbook pro (seems to work fine) and the wall socket, charge adapter this stock came with the iPad Pro?

  Any response is greatly appreciated! I plan also to go to my Apple store closest to ask in person and, possibly, your comments permitting the free opportunity to life at the College...

  Thanks to everyone and anyone!

  Best regards

  -GKL

  iOS devices regulate the charging process internally. A charger using old Apple should not harm him, but it may require too slowly. I often have reload my iPhone with my charger for the iPad, but the inverse would be too long. I would use the charger supplied with your pro.

• Pavilion p7-1222: cannot connect to internet using stock card Broadcom WLAN

  I have a p7-1222, which has been recently updated to Win10 64 bit. Since the upgrade, I've known little or no connectivity using 46.0.1 Firefox or Internet Explorer v 11.0.31 so you use ipconfig, I can ping my router and receive a very quick response. I have the Broadcom WLAN stock adapt with an era of 2010 driver who seems to be the current driver when I do an update. Is there a more Win10 driver for this card? Do I need a newer adapter which is compatible with Win10? What can I do to connect to the internet with a certain type of regularity? Thanks for your suggestions!

  Hello:

  If your PC has network Broadcom 4313 wireless adapter, I believe that this does not work so well (if at all) with W10.

  The only suggestion I can offer would be to see if the W8.1 driver provides an improvement.

  This package contains the Broadcom wireless LAN drivers that are required to activate the integrated Broadcom Wireless LAN Adapter into laptop computers supported running a supported operating system.

  6.30.223.267 Rev.A (September 17, 2015)

  FTP://ftp.HP.com/pub/SoftPaq/sp72501-73000/sp72931.exe

  If this does not work, the best thing to do would be to get an external usb wireless network card.

  I use it on my 3 HP of the PC business office.  Works very well on the W10.

  http://www.Amazon.com/Linksys-dual-band-Wireless-N-adapter-AE3000/DP/B007ZLGXA8

• USB cord

  I need a USB cord for my DSCWX 300

  Hello, PurrplePam!

  Sony authorized dealer named Encompass has a USB cable for your DSC-WX300 currently in stock!

  https://Sony.encompass.com/item/10176153/Sony/1-846-615-12/Cable_Connection _ (Usb)

  Best regards

• Satellite Pro M70: What USB 2.0 Port Replicator is compatible?

  Would be grateful if someone could advise me on the purchase of a USB 2.0 port replicator.

  I think the 3 USB 2.0 ports on my laptop Pro M70 are not enough, and that's why I want to buy a USB 2.0 Port Replicator.

  The site of the Toshiba shop specifies USB 2.0 Port Replicator II (UK) with port network, part number: PX1173U-1PRP, price: 49,93 GBP.

  It has 4 USB ports 2.0, which would give me a total of 6 USB 2.0 ports, which would be the absolute minimum I want. (It also has 2 PS/2 ports, 1 serial port RS232 and 1 USB 2.0 port network that takes in charge rates of 10 / 100 Mbps).

  Can anyone tell if it is powered by the laptop, or by it's own adapter?

  Unfortunately, the Web of Toshiba site has advised that it is currently out of stock and are difficult to get in on all the time, as they are the subject of a sort of "green manufacturing" test.

  This prompted me to consider buying a replicator USB 2.0 ports alternative and all I would prefer one with more than 4 USB 2.0 ports, and in fact 6 or more USB 2.0 ports would be preferable. I'm not really interested in other types of ports that are often provided with the replicators of USB 2.0 ports.

  I would be grateful if someone could recommend/Advisor at a replicator USB 2.0 ports alternative that would be compatible with my laptop Pro M70.

  One of my concerns is how the port replicator USB 2.0 Port is powered. I think I would have preferred that the unit is powered by its own adapter, I understand is 5 Volts with 500 milliamps for each port, rather than to the laptop (probably would be less tax on the laptop, with less heating).

  Thank you
  AlanCB

  I can't comment on the question whether the Replicator you mention has its own power source, although I suspect, he does

  However, I have a satellite Pro M70 too and with a similar problem and wanting a hub to connect to all my external printers, Sandy etc using just one connection, I buy PA3390E-1MPM - a hub of Toshiba, Audio/USB multimedia center, which goes a step further and provides a hub not only for USB sources , but also for the speakers etc.

  It has its own power supply to the unit and connects via USB 2.0 to my laptop. It is also stackable with the Toshiba Gigastore 250 GB USB 2.0 external hard drive (PA3392E-1MPS) which I also use for backups, storing external data etc.

  Had the two units for 3 months now and everything works fine. I got headr of some problems with people in loss of access to the hard drive, but it seems that it was never if it has been disconnected by pulling the cord out usb, rather than make a ' Safely Remove Hardware to disconnect the USB device and so far have had no probs at all

  It has 4 ports, more port network and connections from the speakers for the configurations 2/2.1/4/4.1/5.1 full, more Creative software like drivers, more remote control useful to control audio devices. Oh, and also a Surround sound, and EAX

  Maybe a little more of your option, but worth it in my opinion. If you can't find it on the Toshiba site I have purchased from www.insight.com

  Hope that helps
  Steve

• USB host mode

  Hi, I bought an OTG cable for my family of Xoom to connect keyboards and other flash drives but even though I'm sure that works of OTG cable (I checked with my Samsung Galaxy SII Skyrocket), the Xoom does not seem to recognize or keyboard or flash drives.

  Is that all I have to do for this? I thought it was supposed to be enabled by default, because in stock, I realized there is a section called external USB storage.

  Thank you

  You will need to disable the USB debugging for this to work. I just tried and it worked...

• Satellite A30 series can boot from USB external HDD?

  Hello

  I have a satellite a30 series laptop. Anyone know if I can boot from usb hard drive? My bios has an option to boot from removable devices. I want to install linux but my laptop has only 30 GB of internal space and most of that is out of stock, that's why I want to install and run linux from a disk usb external hard.

  Thank you

  As far as I know that something like this is not possible. To see if anyone has any other theories. ;)

• Noise all using any device USB to the Satellite L655 - 19H

  Some time ago I bought the laptop Satellite L655 - 19 H.
  After say 2 or 3 weeks of use, I realized that sometimes it makes strange noise - like whistle not very strong, or something like that. Then I realized that it depends on the use of usb devices, when I plug in usb-flash Cards, keyboard, mouse, webcam no matter what usb device - this noise appears.
  Gave my phone for warranty service, they have repaired more than 1 month, then gave me the diagnosis - problem with the motherboard, the motherboard replaced.
  But the problem is always the same, the same noise. Is not too strong but after Let's say 5 hours near this large moskito makes crazy ^^.
  So I have two questions:

  1. everyone knows what this noise could be connected to? I am not an expert in the field of electronic devices, but spoke with a friend of mine, he said, it could be related to damaged transistors or defective to the Manger-usb or something, this is perhaps true?

  2. How can I check the serial number of the motherboard that has been installed on my device, when it was produced - I want to check the warranty service guys have really done anything, and they just kept my laptop 1 month in stock and then said, he fixed, man.

  Thanks for your help and best regards.

  Very interesting question.
  Have you noticed the same behavior with or without adapter?

  # I think you're the first person on this forum who has this strange issue reports related to the use of external USB devices, so I don't think it is a general problem
  # This can be problematic. Have you checked screws at the bottom of your laptop? They are like a new or it is visible that your laptop has been opened?

  What you can try is to communicate with other services and ask to check again.

• Backup on USB fails for lack of space; but it's a blank disk and there is no files on it!

  I have improved my NV + v1 (4.1.14) with 4 x 2 TB drives and I met the 4 k block size problem. So I'll try my backup device so that I can factory reset it.

  The current size of the volume is 1.3 to, so I took on one of the 2 TB drives to use as a backup via USB. 1.3 TB should fit easily in 2 TB, right?

  I added the 2 TB drive to the front USB port and formatted in ext3, it shows very well in stocks and a space free expected.

  So I made a backup and the source = task share / dest = USB/Sharename/and he ran.

  It works for a few minutes and stops with this error:

  Encountered error copying data from the source ==> /USB_HDD_4_1 path / / bla due to lack of disk space. [Job 003]

  I look at the USB and it is FULL. Zero byte available. He made a few records, but they are all empty.

  What is going on?

  Are there hidden files (.appledouble, etc.)? I ran BlueHarvest on the volume before the backup, and he deleted a bunch of them. But not 2 value of TB.

  I use this volume mainly with my Mac... am I missing?

  Any help is appreciated! Thank you

  OK, I got the multiple partition problem.

  When partitioning a disk with Mac disk utility, it creates a partition from FAT32 MASK called EFI which is used for Intel to start. The EFI partition is confusing RAIDiator and leading them to try to use the small EFI partition instead of the large main.

  Since I am not start this drive (it's only for backup), it is safe to remove it. You must enable a debug option to see the partition in disk utility. Google search for "EFI Partition delete on mac" to see how to do it.

  Also, I used EXTfs for mac by Paragon Software that allows you to create and mount ext3 on your mac partitions. http://www.Paragon-drivers.com/ExtFS-Mac/

  Backup operation runs now... If all goes well, it ends with success!

• HP Pavilion 15-p054su (J8D22EA) driver for USB 3.0

  Hello!

  I recently bought the Pavilion 15 - p054su and I installed win 7 64 bit, everything works ok except my usb 3.0 ports.

  I tried to install several drivers but nothing helped. Last I tried is the expandable controller from intel, but when I try to install I get a message "your computer is unresponsive to the minimum requirements of the system.

  CPU:
  Intel Silvermont
  Hearts 4
  Son 4
  Name Intel Silvermont
  Codename Silvermont
  The Socket 1380 BGA package
  The 22nm technology
  Specification Intel Pentium CPU N3530 2.16 GHz
  Family 6
  Extended family 6
  Model 7
  Model expanded to 37
  Not to not 8
  Instructions, MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, SSE4.2, Intel 64, NX, VMX
  Virtualization made supported, disabled
  Taken hyperthreading supported, disabled
  83.3 MHz bus speed
  Base speed 2166 MHz stock
  Stock of 83 MHz Bus speed

  Memory:
  Type DDR3
  MB size 3992
  DRAM 666,7 MHz frequency
  CASE # latency (CL) 9 clocks
  # For CASE # Delay (tRCD) RAS 7 clocks
  RAS # Precharge (tRP) 7 clocks
  Clocks of cycle Time (tRAS) 14

  Motherboard:
  Manufacturer Hewlett-Packard
  Model 227 b (CPU 1)
  Version 097C100000005F10000600080
  Intel chipset provider
  Model of chipset Host Bridge Trail Bay
  Chipset revision 0E
  Southbridge Intel supplier
  Southbridge model Bay Trail LPC Bridge
  Southbridge 0E review

  Graphics card:

  VGA Standard of Intel graphics card
  Intel manufacturer
  Standard VGA Graphics model adapt
  8086-0F31 device ID
  Revision F
  Subprovider HP (103C)
  Level of current Performance 0
  Version 6.1.7600.16385 driver

  http://WWW8.HP.com/BG/BG/products/laptops/product-detail.html?OID=7273524&JumpID=reg_r1002_bgbg_c-00...

  Someone please help and thank you!

  Hello:

  You need this driver USB 3...

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=23789

• pass USB Bluetooth for car audio

  I have a CR - V Honda Touring 2015 model.  Initially playing audio through bluetooth worked flawlessly, phone calls and messages worked very well too.

  I tried to get the album in shuffle mode to work (see other posts by me) on my iPhone 6.  I got an iPod classic to see if it would work with this combination.  Well, it does (after some fiddling).  Then I unplugged the USB iPod and plugged the iPhone 6.  System played as expected (but did not play mode random album).  Now I can't get the iPhone to read audio data via bluetooth, I can do other things like switch titles.  Telephone stocks to work very well.  I'm pretty sure it's the iPhone of my son plays very good audio via bluetooth.

  I tried: reboot, reset the settings, disconnect and repair on iPhone

  Anyway to get the iPhone 6 to read audio data via bluetooth and USB not?

  I should add that I tried the iPhone even in another car (VW GTI) and it worked, so that there could be no finger pointing as it was the car (CR - V) or the iPhone which was worth.

  Long story shorter, I think go to settings > General > Reset and using the two reset network settings seemed each AND reset all settings TWICE, to restore things.  If I had to do it again, I'll try first the old just.