Stop 0x0000007B error when you try to do a clean install of Windows XP Pro SP3 on a HP m9400t

Similar Questions

• Error when you try to upgrade a previously installed to the last ESXi 4.1 VIC VIC

  Everyone knows about this problem with ESXi 4.1?

  After installing ESXi 4.1 (new installation on host - not upgraded), at the opening of the VIC on a workstation and connect to the new host ESXi 4.1, it tries to upgrade the VIC as usual, but fails, retune the error: "customer support required files cannot be retrieved from the server.  The identification process will now stop.  Details: the request failed due to a failure of the connection. »

  So I tried to install the VIC by accessing pages web host.  When you click on "Download vSphere Client", he tries to click on the following link (http://vsphereclient.vmware.com/vsphereclient/2/5/8/9/0/2/VMware-viclient-all-4.1.0-258902.exe), instead of download the VIC to the host.  When you try to download the VIC of the host, I tried the IP address and the DNS name, the two are unable to point to the correct location.

  Any thoughts?

  Thank you

  I think I've read that with ESX 4.1 you can not download the VIC of the ESX host, more - you must download from the VMware site.

  I downloaded the 4.1 VIC from VMware and installed without problem for me...

• 0 x 80070011 when you try to add the Media Center of Windows 8 Pro

  I am attempting to add Windows Media Center to my installation of Windows 8 Pro but get an error message saying something with evil.  Looking at the logs, I see that the problem is "DoTransmogrify failed due to error 0 x 80070011" which indicates there is a problem with my user directory is on a drive other than the Windows folder.  Since I have an SSD relatively low to start I moved my user to a much larger hard drive folder.  Should not directory junctions work the same as if the file was on the same drive?  Is there a work around short replacing my user on the c: folder?

  Thank you!

  I had a similar problem with window 8 RSAT tools that lead me to this post in my search for a solution. I'm not positive that this will solve your problem but it worked for me. Because the Setup program does not seem as follows symbolic links that point to different disks, I simply said the installer the real location of the profiles it is updated during the installation. Open the registry editor and navigate to:

  HKLM\Software\Microsoft\WindowsNT\CurrentVersion\ProfileList
  Change the location of the "Default", 'ProfilesDirectory' and 'Public' StringValues to point to the real target of your users path a symlink on drive c. (IE. "D:\Users\*).
  Run the Media Center Setup
  Change back the path in the registry.
  (I'm not positive that this is necessary, as you'd still have the symbolic link on your C drive as points that anything using this path to the right folder, I just changed it back to %SystemDrive%\* so that I could test to see if the RSAT tools has always worked without the explicit path used in the registry.)
  Good luck. I hope this works.

• Error when you try to use the webcam: host process Windows stopped working-RUNDLL32

  RUNDLL32

  Whenever I use the webcam on my computer, he brings a message as follows:

  WINDOWS HOST PROCESS (RUNDLL32) HAS STOPPED WORKING

  I can still use webcam with no problems, but I have to cancel and close this message

  What is this error, why this is and how can I solve this problem

  Whenever I use the webcam on my computer, he brings a message as follows:

  WINDOWS HOST PROCESS (RUNDLL32) HAS STOPPED WORKING

  I can still use webcam with no problems, but I have to cancel and close this message

  What is this error, why this is and how can I solve this problem

  I read this from an old thread in this forum.
  Here is the suggested solution...
  Disable the webcam.
  Start button > Control Panel > Classic view > Folder Options > view > first entry,check "always show icons never thumbnails" > OK.

  Open your Webcam again. The message is passed now?
  If so, turn off the webcam.
  Back to Folder Options > uncheck the first entry "always show icons never thumbnails".

  Open the webcam again. The message comes back?
  If not, problem solved.

  Source:
  http://social.technet.Microsoft.com/forums/en-us/itprovistaapps/thread/46d915fb-E470-41c6-A4de-dc56d05e258f

  t-4-2

• "IR hardware not detected" error when you try to configure the TV signal in Windows XP Media Center 2005 with Service Pack 3

  I have an HP dv6000t. He came with Yuan EC680 ExpressCard analog TV
  Tuner. When I upgraded to Vista, the IR receiver seemed to be detected,
  but after downgrading to XP MCE 2005. XP MCE 2005 was the ORIGINAL OS
  on the system (bought in November 2006). I've updated the drivers for the TWO
  the tuner card AND who do not HAVE the nVidia GeForce Go 7400 video card
  address this problem. Any suggestion on how to solve this problem would be greatly
  appreciated. What HP had try me, including Sofpaq fixes are not
  address my problem. It does not give the error "IR hardware not detected".
  overnight, it correctly detects the signal from my digital cable box.
  The main problem could partly be the we FINALLY converted to digital television
  signal and I always try to use the analog tuner ExpressCard? Once again
  any help is greatly appreciated.

  I found this fix on another site.  We're supposed to plug the IR cable to the TV box at the back of the first port on the remote sensor Windows Media (the ' antenna' of the Windows Media Center remote control) and then to put the tip of the probe of the IR cable to the cable TV box distance near the sensor on the cable box (it can be seen by a light in the glass) and then complete the configuration of the channels in Windows Media.  The problem is, it does not work unless there is also something connected to Port 2 of the medial distance sensor Windows as well (a head set will do).  With the sensor box IR cable company cable plugged into the first port in the back of the remote Windows Media sensor and headphones plugged into Port 2 of the remote sensor, Windows Media, and the end of the probe of the sensor cable box IR cable near the cable box remote sensor box, Window Media channel setup "found" the cable of the IR sensor and allow me to complete the installation.  I could not bind the Windows Media remote sensor with the remote for the cable box, but said that I managed.  I use the remote cable box to change channels and have box IR cable connected on the decoder cable TV and put the cable box IR receiver cable on top of my desk.

• "Only one instance of wusa.exe is allowed to use" error when you try to install a Windows Standalone Update package

  I just came across this error when you try to run the stand-alone update of Windows for Microsoft Virtual PC on my Windows 7 Professional machine.  Check the event logs, I saw the following message:

  Windows Update could not be installed due to the error 2147944018 "another installation is already in progress. Complete it before you proceed with this installation. "(Command line:""C:\Windows\system32\wusa.exe" "C:\Users\dorseytm\Desktop\Windows6.1-KB958559-x86.msu" ")

  I searched, but could not find any current installation.  I rebooted several times, I tried to run CCleaner on the registry, stop and start the Windows Update service, but nothing has worked.

  The file I am trying to run is Windows6. 1-KB958559-x 86.msu.  Any help on this would be greatly appreciated.

  Thank you.

  tmdorsey76,
  A few questions.  This error only happens with KB958830 or with others?  What language is run on the PC?

  If you are comfortable with the registry editor, then look to see if this key exists:
  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Installer\InProgress

  If this key is there then first copy it to your desktop then delete this key.

  * Change the REGISTRY settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.* *.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• When you try to delete e-mail messages in Windows Live Mail I get message "an unknown error occurred.

  Original title: "Uknown error has occurred", you can say that again!

  I use Windows 7 Edition home premium. When you try to delete e-mail messages in Windows Live Mail I get the message "an unknown error occurred. This seems to happen only when I want to delete the messages that have already been opened. Can I delete mail unopened very well. I am allowed to remove an open both message. But as I do that a few times to the top appears the message again stop again.

  Hi Rasrick,

  1. you receive with the message error codes?

  You can check out the following link and check if it helps:

  http://windowslivehelp.com/thread.aspx?ThreadId=8255bf0a-05ca-4e63-9c7c-b456e9c3a648

  If this problem occurs only with Windows Live Mail, you can post the question in the Windows Live community:

  http://windowslivehelp.com/product.aspx?ProductID=15

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Error when you try to run an application that worked when built with 8.6

  I have a simple program that I wrote in the 8.6 version that I've never had a problem generation and execution of applications built with it to 8.6.  Two weeks ago, I got 2009 by mail because we had very recently purchased 8.6 and I get errors when you try to run an application built with the same code using 2009.  The error relates to the Mean.vi.  He claims that he can't find it.  The error I get is as follows:

  Error loading VI 'NI_AALBase.lvlib:Mean.vi '.  LabVIEW support 3 error code: could not load façade.  I don't have access to the front panel of this vi, so I wonder if there is a problem with the runtime and not my code.  Please answer as soon as possible because it will quickly start to the impact of my calendar.  Thank you.

  Hello!

  The same problem ?

  I talked with my local OR technical support team. The application now works without any problem.

  Rule of thumb: when creating a Setup program do not forget that the option "Run Time Engine xxxx" in the category "Other installers" is selected despite the fact that the runtime is already installed.

  Best regards.

• get error when you try to lower the java load error 1-4 of 4 0 x 80070643.

  get error when you try to lower the java load error 1-4 of 4 0 x 80070643.

  This forum is for Microsoft Security Essentials.

  You question is with Oracle Java.

  It is recommended to go to www.oracle.com to get help.

• HTTP 503 error when you try to deploy the project in Visual Studio

  I get a http 503 error when you try to deploy a project in Visual Studio-SQL Server 2005. What this mean and how can I solve this problem?

  Hello

  I suggest you refer to the following msdn link for the fix for the problem.

  http://msdn.Microsoft.com/en-us/vstudio/aa718325

• Windows7 64 I get C646 error when you try to install KB982331

  In Windows7 64 I get C646 error when you try to install the update of security KB982331.  I tried Windows update and download it directly.

  Hello

  Here's what I recommend you do:

  1. Tower of AUC. Down comes the restrictions - turn it off completely.
  2 restart your computer for the change to take effect.
  3 re - download the update of security for Microsoft Office System 2007 (KB982331) from the link below:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=7f89a734-cda4-4abb-9a10-f6dfe560e8d0&displaylang=en
  4. install. It should work fine.
  5. If it still does not work, try to open all or part of your MS Office applications (such as MS Word, MS Excel, etc.).
  6. follow step 3.

  Let me know your results.

• code 80070017 error when you try to downland microsoft office service pack 2 on vista

  code 80070017 error when you try to download microsoft office service pack 2 for vista

  0 X 80070017-2147024873 - ERROR_CRC
  Data error (cyclic redundancy check).

  This problem may occur if there is a failure of control of cyclic redundancy (CRC) check during the update process. This failure can occur if the received file is not the file that is expected by Windows Update

  Run the Chkdsk.exe tool to check the drive for errors

  If this does not help, then manually download the update you need and see if that fixes the problem.

  Description of 2007 Microsoft Office Suite Service Pack 2 (SP2) and of Microsoft Office Language Pack 2007 SP2
  http://support.Microsoft.com/kb/953195 TaurArian [MVP] 2005-2010 - Update Services

• Windows XP SP3: Access denied error when you try to change the beginning upward in MS CONFIG. Director of applications but I am the administrator.

  original title: access denied errors when you try to change the beginning upward in xp sr CIP 3 msconfig. I am the administrator, please the administrator

  I am a user with privileges under windows xp pro service PAC 3. I recently received an access denied error message acusing me of not being the administrator when I tried to limit the start up programs in msconfig. What should I do these changes in safe mode?

  You have scanned your system for malware? It seems its infected with something. Download ccleaner install / run. Then go to tools / startup. Delete the entries that you want here

• Error when you try to install the software update of tax

  It is for the HR Block Tax software,

  Update installs successfully on the XP machine, but on windows 7, I get this

  "Windows Installer does not allow patching of managed advertised products. At least one characteristic of the product must be installed before applying the patch.

  I made sure that it is running as an administrator. Tried to use the previous version of windows. Still lost.

  Google and seems that it may occur with other programs as well. Have not found a solution very clear.

  Hello Joslinm,

  1. do you get this error when you try to install any other application?

  I suggest that you contact the H & R support and check if the application is compatible with Windows 7. Here is a link you can follow to contact support:

  http://www.hrblock.com/support/index.html

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.

• msncon.dll Outlook 2010 error when you try to open outlook

  msncon.dll Outlook 2010 error when you try to open outlook

  Outlook:

   

  http://answers.Microsoft.com/en-us/Office/default.aspx

  Office at the above link forums

  http://answers.Microsoft.com/en-us/Office/ee861097.aspx

  Outlook Help Forums at the link above.

  They will help you with your Outlook questions when repost you in the Office Forums above.

  See you soon.

  Mick Murphy - Microsoft partner