Stop before you start error message

Similar Questions

• Before you start, receive message "Exc in ev handl: this.» 0ROOT.enable is not a function", that mean

  Before start of Mozilla Firefox (MF) and after you press start, a
  message box appears on the screen:
  Message

                Exc in ev handl:This .0root. enable is not a function
  

  When I press the MF button enter begins and everyhing seems to be
  works very well. MF will not start until I press the Enter key.
  Why! bold text

  Add-ons are the responsibility of their authors. McAfee does not yet have their extension on http://addons.mozilla.org that you had to install from their site.

  Disable the extension "McAfee Site Advisor" who has just updated 3.4.0 that probably out of block of addons list.

  • 'Ctrl + Shift + A' > find McAfee Site Advisor and use 'Disable', and then restart Firefox.
  • Do a Google search without problem
  • It seems that if you re - enable new Site Advisor and restart Firefox you agree. At least you know where to look if you get the error again, or research on Google to slow down.

• When I start my PC, and before you start I receive this message from InfoCenter.exe - Application error - the application is not initialate properly (0xc0000135).

  Original title: initialize 0xc0000135

  When I start my PC, and before you start I receive this message from InfoCenter.exe - Application error - the application is not initialate properly (0xc0000135). I just click OK and continue. Any problem? Is this necessary application?

  Walter Rodriguez

  E-mail address is removed from the privacy *.

  10/07/12

  14:57

  Hello

  1. do you receive this after you see Start button or entry?

  2 have you made any changes to the computer before the show?

   

  Method 1: Boot errors are fixed by the clean boot.

  Perform the clean boot and see if that helps.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  Reference: How to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  http://support.Microsoft.com/kb/929135

  Note: when you're done to diagnose, follow step 7 in the article to start on normal startup.

   

  Method 2: Some malware parody itself as InfoCenter.exe, especially when it is located in the folder c:\windows or c:\windows\system32.

  I suggest you make a system full scan just to be sure.

  Here is a link that will give you information on how to perform a full scan of the system:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  , Note 1: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Note 2: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

• My Lexmark printer stopped working and the error message says "printer cannot communicate with the computer" (from "twisted into the USB pins?).

  When my printer stopped working because of error messages about "printer cannot communicate with the computer" (from "twisted into the USB pins?), I tried to change to 2nd USB port without success. I tried a new cable; that did not help.

  Then I uninstalled and reinstalled my Lexmark printer and changed the error message. Now, the printer does not work because "the USB device is not recognized."

  I tried to update the chips; Use 1 USB port; and using the old cable, all this without success. I checked the connections of the cable to the printer and the PC and turn on the printer and goes off; I'm out of ideas. Any other suggestions?

  Hi ChristineKrause,
   

  Here are some links that might help you:

  Peripheral USB is not recognized when you attach it immediately after that your Windows XP computer comes out of standby or hibernation

  Advanced troubleshooting tips for General USB for Windows XP problems

  Try the steps listed in the items mentioned above and see if that helps you solve the problem.

• Vista System Restore does not work. I disable Norton Antivirus before you start the process. What can I do else?

  Vista System Restore does not work. I disable Norton Antivirus before you start the process. What can I do else?

  1. try SR in safe mode:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  2 Malware will stop at the system restore:

  If necessary, do all the work Safe Mode with network.

   

  To get into Safe Mode with network, press F8 at the Power On / boot and use key arrow upward to get into SafeMode with networking from the list of options, and then press ENTER.

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight.

  See you soon.

  Mick Murphy - Microsoft partner

• the upgrade of windows 8 at 81, will be hp support assistant update drivers before you start

  I recently bought fancy m7 j020dx 17 running windows 8, I thought it would make more snse upgrade to windows 8.1 before I install other software and other.  It's not not clear to me if hp support assistant will detect if the drivers I have are all of this to date.  can anyone tell me for sure?  Thank you!

  KevinOr

  Do not use HPSA to 8.1 Windows Installer driver, many system had an accident with the update of the Bios on HPSA

  Download the Bios and the driver manual

  before you start the windows 8.1 update

  Uninstall the Virusscanner and install the new Bios

  http://ftp.HP.com/pub/SoftPaq/sp64501-65000/sp65000.exe

  Download the other drivers from here

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4158&LC=en&cc=us&DLC=en&sw_lang=&product=5447327#N2074

  If you have a problem after installation

  Delete restart driver Intel HD and install the new

  Read the instructions of Windows 8 to 8.1

  http://support.HP.com/us-en/document/c03847367

• Can (must) I apply all current patches to the newly installed instance of EMP 11.1.2.1 release before you start to configure it?

  Can (must) I apply all current patches to the newly installed instance of EMP 11.1.2.1 release before you start to configure it?

  Hello

  First, you configure the new instance and check if it works well. Then apply patches, following the patch readme. Patches usually does not require a full configuration.

  Thank you

  KK

  ~ Mark answer if its helpful.

• I'm going to erase my media Cache files before you start a new project, but when I go to/Library/Applications/Common/there is no media Cache folder. I have never had this problem before and am 10.9.5 OS and using clues CS6?

  I'm going to erase my media Cache files before you start a new project, but when I go to/Library/Applications/Common/there is no media Cache folder. I have never had this problem before and am 10.9.5 OS and using clues CS6?

  Hi Dave,.

  The location is ~/Library/Application Support/Adobe/Common to be exact.

  Make sure that you type the TILDE (~) key.

  When in the Finder, click the go > go to folder... > Type ~/Library and navigate to Application Support/Adobe/Common

  Thank you

  Regalo

• Designjet 510: Designjet 510 starts printing, then everything stops and "blocks" no error messages...

  My normally reliable Designjet 510 suddenly started having problems printing: it starts to print my drawings, no problem, but it suddenly stops and just print head 'crashes' and no longer print.  He sometimes starts from the beginning of printing, he sometimes almost at the end of the drawing before it stops, but he can't seem to finish the print job.  The printer does not display an error message, it still shows that it is printing, but no matter how long I leave, it will not at the end of a drawing.   I'm on Microsoft Windows 10 - there was a hiccup when I upgraded Windows, but after reinstalling the printer driver, it seems to work again no problem.  I'm tearing my hair out (and lose large amounts of paper) trying to get anything to print!  Pointers would be welcome.

  Thank you.

  P.S. I posted this problem previously, then thought I had sorted by adjusting the settings of the printer, but she went back, and I am no closer to knowing why!

  How is the printer connected?

• Automatic scrolling of the list of favorites on the start menu to stop before you reach the bottom

  I open the start menu, point the mouse on the Favorites bar and keep the cursor under the small arrow pointing down at the bottom of the list of favorites, as well as the list of bookmarks automatically scrolls down. But after scroll down a number of bookmarks, automatic scrolling stops before reaching the bottom of the list of favorites, view the rest of the empty list. I removed a lot of unnecessary bookmarks in the Favorites folder in Documents and Settings, but this does not resolve the issue. I would like suggestions for this problem, which I have not come across so far. I ran CHKDSK disk cleanup and defragged the volume of disk hard, but in vain. I have Windows XP Pro SP 3 with IE8 installed on my computer.

  THIS POST has BEEN contrary to the ETHICS of COPY AND published by www.qnundrum.com on its website. I don't know how to report this error to Microsoft. Anyone can report to Microsoft?

  Hi ErhanKarabekir,

  Run a full scan of the computer with the Microsoft Safety Scanner to make sure that the computer is virus-free.

  Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Security Scanner warning: there will be data loss through an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

  Thank you.

• How can you fix error message stop 0 x 00000006?

  The keyboard of my computer not responding when this message appears, and then the screen turns white.

  Hello

  ·          When the issue started?

  ·          It happens to a particular case?

  STOP 0 x 00000006 errors are likely caused by device or hardware driver problems.

  Step 1: Disconnect any external devices and check if the problem occurs.

  Step 2: Checking for error in the event viewer.

  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer

  Diana

  Microsoft Answers Support Engineer

• C310a - I can't stop all the HP error message pop up when I start my computer

  Lately and since the fitting (authentic replacement) cartridges, the error messages - jam paper, cartridge problem paper loading, insist on popping up over and over again, even if I click on the relevant Red Cross to close.

  I tried the * beep * and on this forum for a solution.  I found the one nearest asked that the printer had to be checked for stray pieces of paper or other debris which would cause these messages to appear.  Apparently, they are all related to this type of error.

  I checked the printer including the duplex unit, but found no debris, lint or other debris.  I have downloaded and run the Diagnostic tool but still once, found nothing untoward.

  I'm happy the printer works fine, (it prints, copies and scans perfectly fine).

  I have to reset anything?  If so, how?  Or can someone tell me what I may need to do to solve the problem?

  Thank you very much

  Alright. I think it's safe to say that it is a software issue and not a hardware problem. So reinstall software has to deal with the problem.

  Click Start Menu > all programs > HP > HP Photosmart C310 Seris > uninstall to uninstall the software. Download the latest software and drivers for your printer using the link below, then run it to install the software again. This should solve the problem.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-85745-1&cc=us&DLC=en&LC=en&OS=4063&product=4231205&sw_lang=

• PAGE_FAULT_IN_NONPAGED_AREA Stop 0 X 0000050 error message (0XBAD0B148, 0 x 0, 00000002 00000000, 0X805B0BCA)

  Hi people:

  Thanks for any help you may be able to give!  I am a real novice at the request for such assistance, so please, I need your understanding and your patience.  I searched the web, forums and site windows.com.  All I got is, sorry, your search did not reveal an answer.  This problem exists on my wife's cell phone, but only after she used it for awhile and then it allows to sit unused, still for a while.  How long before that happens I can't say, because I usually notice it after that she went to work.  This has happened for the fifth or sixth time now.  If stop us the laptop and then restart it, it works without problem, until it rests still.  I have him, I asked that she installed lately, and she said nothing.  I can usually solve our problems of PC and set "the blue screen of death" before, to find answers on the line, but not this time.

  The OS is completely updated to Windows XP Home Edition that came on laptop Acer 2310, but I'd love to get rid of it and use XP Pro, but...

  I hope someone can it send me a solution for this problem of blue screen.

  Thanks again and have a great day

  Claude

  Hi Claude,.

  You can try these steps and see if it helps.

  Step 1:

  You can read the following article and see if it helps.

  You may receive an error message on a Windows-based computer: "STOP 0 x 00000050" or "STOP 0x0000008e"

  Step 2:

  You can also try to perform a clean boot and check for the issue.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to configure Windows XP to start in a "clean boot" State

  After the troubleshooting steps, please refer to clean the boot link to put the computer to normal startup mode.

  Hope this information is useful.

• When I try to install a program (for financial data graphics) I get a message that the wizard to uninstall shield is in use and turn it off before you try again.message # 432, according to me, or perhaps of 423

  If I try to install programs by downloading fromm the internt (lately a program to draw and make calculations on financial data) I do not pass. The error message is the following:

  Uninstall Shield Wizard is in use

  Turn the power off before trying again

  error # 423 or 432

  Hi GeorgeMcWilliam,

  1. Did you the latest changes on the computer?
  2. What program are you trying to install on the computer?
  3. You are able to install other programs on the computer?

  Method 1

  See the link below and run the fixit tool available, check if it helps.

  Diagnose and solve the program installation and uninstallation problems automatically

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  Method 2

  If the previous step fails, then it is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you configure the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. Click Start , and then click run.
  2. Type msconfig , and then click OK.
     The System Configuration utility dialog box appears.
  3. Click the general tab, click Normal Startup - load all device drivers and services , and then click OK.
  4. When you are prompted, click restart to restart the computer.

• Start error message "Run DLL there was a problem starting C:\users\Maureen\AppData\Local\Temp\ the specified module could not be found."

  Original title: run DLL error message

  When I start my computer, this error message box appears: run a DLL there was a problem starting C:\users\Maureen\AppData\Local\Temp\ the specified module could not be found.  I tried to run malware byte scan Antivirus scans, security analysis of microsoft, microsoft's malicious software removal tool, scan, prevx, and nothing was found.  I'm not very well informed about computers, but this error box is annoying and I would like to quit smoking.  Thanks for your help.

  Hello MaureenCYB,

  Thank you for the question!

  I'm sorry to know that have problems you with the startup message. As I understand it, you get an error message "Run DLL there was a problem starting C:\users\Maureen\AppData\Local\Temp\ the specified module could not be found" when starting.

  I need to ask you a question to help you best.

  Were there any changes (hardware or software) to the computer before the show?

  To help resolve the error and other messages, you can start Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Note: follow step 3 to reset the computer to start as usual after the boot process.

  Answer to us if you are having problems with error starting or any other issue of Windows, and I'd be happy to help you again and try to correct the problem as soon as possible.

  Good day!

  Hope this information helps.