stop code: 0x8A65FC08 (0xC0000006)

computer starts up and gets past the bios, then goes to select the start option, then begins to load windows xp and the blue loading symbol goes for awhile then stops and failure blue screen flashes for a split second and restarts the computer, stop 0x8A65FC08 (0xC0000006) code. Any ideas?

Hello

I suggest you to follow the steps in this link and check if it helps:

http://support.Microsoft.com/kb/308041

It will be useful.

Tags: Windows

Similar Questions

  • STOP: 0X000000ED (0X8A930900, 0XC0000006, 0X00000000, 0X00000000)? Help!

    Ok. So, I got this labtop that I threw in my closet because it has stopped working, I tried to use new and this blue screen with the error code, recently STOP: 0x000000ED (0x8A930900, 0xC0000006, 0x00000000, 0x00000000) I fergot my admin password recover so it is almost impossible with the start of the CD. Help please?

    Hello

    something about the control bug 0xED is here:

    http://msdn.Microsoft.com/en-us/library/ff560355 (v = VS. 85) .aspx

    (Which indicates that the IO subsystem attempted to mount the boot volume and it failed)

    So, if you have not the administrator password, only you can do - disassemble the HARD drive of your laptop, insert it into another computer and run the CHKDSK command from the command prompt:

    CHKDSK x: /f

    where x: is the HARD drive volume

    This could help you, how to run the command prompt and the command CHKDSK:

    http://support.Microsoft.com/kb/315265/en

    LC

  • Blue screen - UNMOUNTABLE_BOOT_VOLUME STOP: 0x000000ED (0x8A93D590, 0xC0000006, 0x00000000, 0x00000000)

    Original title: I'm trying to start Windows XP after getting the Blue Screen of Death

    Here are the specifics on the BSOD:
    UNMOUNTABLE_BOOT_VOLUME STOP: 0X000000ED (0X8A93D590, 0XC0000006, 0X00000000, 0X00000000)

    I started on the boot CD after changing the order in the BIOS.  Run the test fast and got this error:
    0F00:1344 error code
    MSG: Block 413906: error impossible to correct data or media is write protected
    Any suggestions on what to do next?

    First, store the boot CD.

    Secondly, because we know nothing on your system, you could tell us about it.

    Third, follow the directions in this thread:
    http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/unmountable-boot-volume-stop-0x0000000ed/570c7f90-5869-E011-8dfc-68b599b31bf5

  • Re: hp stop code

    Hi, locked out my computer bios on hp pavilion laptop have a stop code 86402351 any help would be appreciated?

    Hello:

    Enter the unlock code:

    39560997

  • Hp246: Stop code 60016543

    I forgot my administrator bios password and I get the stop code 60016543

    @MukeshWarrior

    Enter 75974585

  • I have a mini hp x 64 or and my stop code is CNU9254R4M I forgot the password please help

    I have a mini 1116nr hp, I forgot the password. Stop code is CNU9254R4M can any one help thanks in advance...

    @spiderdish2020

    Enter: e9lo7qvbv4 (3rd character is a lowercase L)

    Kind regards

    DP - K

  • Compaq RT3290-C2: stop Code / COMPAQ

    Hey, need a little help here :/

    My stop code is 55020283

    I can't access the computer without the BIOS password...

    Thank you!

    EDIT: don't know why my message has ended up here, I wanted to write it here: http://h30434.www3.hp.com/t5/Notebook-Operating-System-and-Recovery/Bios-Password-Halt-code/td-p/270...

    @MatthewMurdock

    Enter 40988805

    Kind regards

    DP - K

  • Lean how to run the stop code when the highest level VI ends

    Hi people.

    I am a newbie of LV with 30 years of experience in embedded SW engineering.  I searched for how to run the stop code when a VI of highest level ends.  I found many examples, but they are horribly complicated.  A little birdie told me that such a model of simple design should not be so compilicated.

    My application is an application of high tension control to disable all HV checkpoints when the SW ends.  My VI code is running in a while loop with a stop button that leads out of the loop.  I can easily accomplish my requirement by programming with a sequence of plate that runs after the end of the main loop.  The technique of flat sequence does not work when the user clicks the Cancel button in the toolbar of façade, more than that market when the user clicks the close button of the application (X button) when you run the exe application.

    Can someone tell me please a simple technique, the code example that can show me a lean and elegant way to accomplish my task?  It doesn't have to be an obvious solution (for example a stop induced watchdog seems simple enough).

    Thank you - John Speth

    1. place this code in a VI:

    (also attached)

    Calling code in your VI of highest level like this:

  • stop code

    I have a presario CQ57.  It is stuck on the blue screen that says "enter administrative password or power on password."  After I entered a wrong password 3 times, I get the stop code: 54768868.

    All codes or else fix it?

    Hello

    Enter: 41640268

    Kind regards

    DP - K

  • Stop code 0x0000007E installation Win XP

    I do a Windows XP installation on the new hard drive in HP Netbook.  When installing happen to point to windows that open, it stops and I get the 0x0000007E error message.  I restart and stop at the same place.  What is the problem?

    Hi Dilbert,

    Welcome to the community Microsoft and thanks for posting the question.

    According to the description, you cannot install Windows XP, you get stop code 0x0000007E.

    I suggest you refer to the article to resolve the problem of the installation:

    How to solve an error "Stop 0x0000007E (SYSTEM_THREAD_EXCEPTION_NOT_HANDLED) code error" in Windows XP

    http://support.Microsoft.com/kb/330182

    Warning of the BIOS:

    BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

    Please follow these recommended steps and post if you still experience the problem. I will be happy to provide you with additional options.

  • Blue screen stop codes: 00000019, 00000020, e19bf3c4, e19bf76c, 0c754c4b

    Hi all!  Yesterday I was working on a Windows XP Professional 32-bit computer, and I got the blue screen with stop codes:

    00000019, 00000020, e19bf3c4, e19bf76c, 0c754c4b
    I've looked everywhere, trying to figure out what this means, but I can't find these codes anywhere.
    I checked the event viewer and found a few warnings, but they were the same and they occurred just at the time blue screens (even a appeared once or twice) that happened.  Here's what he said:
    Service Control Manager IMAPI CD - Burning COM service failed to start or control request in a timely.
    I am also looking for this error on various forums, but I still find something that points me in the right direction.  If anyone has any ideas, please let me know.  Thank you very much!

    Code bug check 0x19:
    http://msdn.Microsoft.com/en-us/library/ff557389 (v = VS. 85) .aspx

    Is there previous BSOD errors as parameter 1 = 20 indicates that when the error occurred that the pool was already damaged.

    You are able to view a copy of the dumpfile as a shared file on a drive of Sky as eamination of the file or an older version may point to the driver causing the corruption?

    Is there an error code in Device Manager on your CD player? What CD burning software are you using?

  • STOP: 0x000000ED (0x84A32900, 0xC0000006.0x00000000, 0x00000000) - unmountable_boot_volume

    Original title: does not start in any mode

    tried to boot the computer. When the windows screen appears, need me the safe mode, last known configuration normal screen start windows. tried the F8 trick and disabling auto reboot system error. took me a blue screen with an error message. unmountable_boot_volume said. also shown on the blue screen "tech info: STOP: 0x000000ED (0x84A32900, 0xC0000006.0x00000000, 0x00000000).

    Hello
     
     
    You can follow the steps listed in the articles below and check if they help us get started on the desktop.
     
    When you restart your computer or upgrade to Windows XP, you receive the error message "STOP 0x000000ED UNMOUNTABLE_BOOT_VOLUME".
    http://support.Microsoft.com/kb/297185
     
     
    I hope this helps.

    Thank you, and in what concerns:
    Shekhar S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.
    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • HP Pavilion TouchSmart 14: Stop Code

    I need help with a stop code:

    53786185

    not able to connect, thank you

    Try > 42684101

  • Stop Code 0X0000008E (0XC0000005, 0X822711A7,...)

    Hello

    I tried to use this stupid program called Ccleaner and when he went to clean the registry, in my view, that he fucked it with my drivers or something because now my flipping laptop mouse does not work.  in any case, I tried to go back to before that I started the program, but it does not work.

    I get the blue screen of death when I start my computer, and then it just hangs.  The stop codes are the following;

    0X0000008E (0XC0000005, 0X822711A7, 0X8CAE891C, 0x00000000)

    Now, I've done some reading on the first 2 codes, but I can't find anything on the rest.

    I reinstalled Windows Service Pack 2 and that did nothing.  I tried to do a restore and that doesn't work anymore.

    Help, please.

    Thank you

    Chris

    Hello

    Update your driver, BIOS and any software of control and then work through the troubleshooting services
    above if necessary.

    Could be a nuisance pilot. Update your drivers manually looking at system manufacturer and
    Sites of the manufacturer of the device.

    This is my generic how updates of appropriate driver:

    This utility, it is easy see which versions are loaded:

    -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
    For each driver in the list, additional useful information is displayed: load address of the driver,
    Description, version, product name, company that created the driver and more.
    http://www.NirSoft.NET/utils/DriverView.html

    For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
    Control Panel - device - Graphics Manager - note the brand and complete model
    your video card - double - tab of the driver - write version information. Now, click on update
    Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
    Uninstall - REBOOT it will refresh the driver stack.

    Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
    with their own software and drivers and all other main drivers that you have.

    Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
    Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
    BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

    Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
    each installation.

    Always check in the Device Manager - drivers tab to be sure the version you actually install
    presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
    in particular that) so to install a driver - reboot - check that it is installed and repeat as
    necessary.

    Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
    manually by model.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
    Updates, this leaves ONE of Windows updates, but it will not install the drivers who will be generally
    be older and cause problems. If updates offers a new driver and then HIDE it (right click on it) and
    Then, get new ones manually if you wish.

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    I hope this helps and happy holidays!

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • Stop code 0x0000c1f5 HELP

    We had to reformat our computer and we had reinstalled everything everything went well past that we got on the interent fine, but when it came to the updates, we have just let it go, after the update retarted the computer, we've got a stop code 0x0000c1f5, he also says to make sure everything is correctly installed and if the problem continues to disable bios (cache or the shading may need to use) well in that safe mode to use advance option we tried all the safe mode options and it will guard will stop code that we tried to restart with the cd with f2, f12, f8 (safe mode) and blue screen again, I'm stuck on my computer and vista is to blame that we did a diagnostic test it and very thing achieved what I can do. Any help is appreciated. I have more money because of the loss of jobs and cant downlaod anything because of the stop code.  Thank you

    Hello

    I suggest you to see the steps from the following links and check that it works.

    Stop error message when you start a Windows Vista-based computer: "0x0000C1F5".

    http://support.Microsoft.com/kb/946084

    How to get around the Stop error 0x0000C1F5 on a Windows Vista-based computer

    http://support.Microsoft.com/kb/970101

Maybe you are looking for