Stop error that drives me crazy.

Similar Questions

• Windows XP crashes and freezes. I receive Stop errors that say I can't restore the computer.

  I have a Windows xp that fails and frequently freezes when I restart my computer, it says it was a stop error that I can not restore the computer because its been there for months and I don't know when to return to I'm pretty certain that it was a virus, but whenever I go to scan the computer , it crashes can anyone help me with this problem?
  original title: help with freezes and freezes

  Hello
  Try following the steps described in this guide: http://www.selectrealsecurity.com/slow-computer
  It provides detailed instructions on how to speed up a slow computer. If you have any questions, just ask. I hope this helps you.
  Brian

• V.18 Illustrator CC (unknown error CANT / Unknown error MIT) drives me crazy!

  Hello

  I installed Illustrator CC v18 a few months ago and I was using it normally.

  I use Windows 8.1

  My operating system language is Spanish (I'm in Spain)

  The language of my Illustrator is also Spanish

  So today I wanted to install a graphic style, which I downloaded from a Web site, and I installed it. Just use the menu of libraries to find the .ai file in which are contained the styles... and then found the .ai file and selected to open it, so I loaded styles, as always. What's happened is this .ai file destroyed my Illustrator. Exactly what happened is this:

  When I searched for the file .ai with styles... and loaded it... in the menu of libraries...

  1 illustrator did not open any library of styles... nothing happened...

  2. then libraries button has been disabled, even if you pressed on top, was completely impossible to make it work...

  So I decided to close illustrator and restart my PC

  After my PC restarted... I tried to launch Adobe Illustrator and what has happened is that illustrator doesn't work well anymore.

  It is as if this style "screwed up everything" inside the Illustrator, and now it gives me many mistakes CANT and MIT!

  Sorry, but hell ARE these errors and CANT... Unknown error...

  3. so I create a new document, I get a CANT and a mistake MIT...

  4. the default styles are not displayed correctly after these errors...

  5. Finally if I create a blank document, and then, when I am drawing something I get screens increasingly bothering me with error CANT... Error CANT...

  ????

  I'm really confused and do not know what to do.

  I have panic to illustrator to uninstall and reinstall again.

  If someone could help me please to solve this problem, I would really be greateful.

  See you soon

  Jacob, you provided a solution to this problem in the past, without having to reinstall the software. I applied your solution... and I think I solved the problem.

  Don't remember you said that some users move Illustrator preference settings?

  I searched the forum and found a job in which you suggested that.

  Anyway... to make easier how solve the problem here is the solution.

  WELL, I THINK I FINALLY FOUND A SOLUTION FOR THE CANT OF UKNOWN ERROR / MIT ERROR UNKNOWN

  * SOLUTION POSSIBLE FOR THE ERROR UNKNOWN CANT / MIT UNKNOWN ERROR IN ADOBE ILLUSTRATOR CC * NO NEED TO UNINSTALL OR REINSTALL anything. ONLY 2-5 MINUTES TO SOLVE IT.
  

  • With this solution you will not have to uninstall and reinstall anything.
  • It takes just a few minutes.
  • This solution has been possible thanks to this site:

  Illustrator tips

  Move the folder: When things get strange.

  
  

  For Illustrator CC *.
  

  
  

  ERROR:

  
  

  • ERROR UNKNOWN CANT
  • UNKNOWN ERROR MIT

  SYMPTOMS: After some time of use, Adobe Illustrator CC does much more and display an ERROR UNKNOWN CANT... or UNKNOWN MIT ERROR... or both... This could happen unexpectedly, or simply by loading the graphic styles developed by a third party.
  

  POSSIBLE CAUSE: The corruption of the preference of the files inside the folder settings Adobe Illustrator CC.

  TIME TO FIX IT: 2 to 5 minutes. NO NEED TO UNINSTALL OR REINSTALL ANYTHING *.

  DIFFICULTY: Easy

  SOLUTION:

  1. Close Adobe Illustrator CC if it is already open
  2. Go to \AppData\Roaming\Adobe C:\Users\
  3. Please note the Windows to create folder with the identifier that you use in Windows
  4. In the \Adobe folder, navigate to the folder... Adobe Illustrator XX Settings, where XX represents the version of Adobe Illustrator, for example Adobe Illustrator 18 settings or Adobe Illustrator 19
  5. Then, move this folder on your desktop
  6. Preserve this folder moved in your office, so on later, you can browse it and recover workspaces already saved (optional)
  7. Now open Adobe Illustrator CC, it will automatically create a new settings file, reset all factory values, without the need to reinstall.
  8. Unknown error CANT or MIT now does not appear anymore.

  WORKSPACES (OPTIONAL) TRANSFER:

  • If you have multiple workspaces, due, we reset Illustrator to the factory default values, you will find more of your workspaces. HOWEVER, WE CAN RECOVER'EM.
  • Workspaces are stored in the folder \Adobe Illustrator XX Settings\en_US\x64\workspaces (for users in the United States) where XX stand for the version of Illustrator... 17... 18... 19... etc.
  • For Spanish users of Spain, 'trabajo espacios' workspaces are stored in the folder Adobe Illustrator XX Settings\es_ES\x64\Espacios of trabajo where XX stand for the version of Illustrator... 17... 18... 19... etc.
  • To recover your work spaces just go to the folder of Illustrator, that we have already placed in your office... and navigate to the workspace folder
  • For users in the United States... \Adobe Illustrator XX Settings\en_US\x64\workspaces
  • For Spanish users of Spain... Adobe Illustrator 18 Settings\es_ES\x64\Espacios of work
  • It copy all the files of your workspaces created earlier...
  • Now go to the folder on the nine parameters for Illustrator, Illustrator CC created on your hard drive...
  • It should be placed in (the United States users)\AppData\Roaming\Adobe\Adobe Illustrator XX Settings\en_US\x64\workspaces C:\Users\
  • For Spanish users of C:\Users\ Spaintrabajo \AppData\Roaming\Adobe\Adobe Illustrator XX Settings\es_ES\x64\Espacios
  • Now, in the Workspaces folder, paste all files Word spaces that you copied into your folder of Office workspaces
  • Fact

  
  

• Blue screen (STOP) errors that cause Windows Vista to shut down (blue screen of death)

  I get this on a blue screen stop code and I can't find what this code means someone can help me please v

  00000101 0 x (0 x 0000000000000061, 0 x 0000000000000000, 0xffff98000c6e180, 0 x 0000000000000001

  Best advice I've seen on this error (here: http://www.sevenforums.com/crashes-debugging/35427-win-7-clock-interrupt-bsod-101-error.html#post356791 )
  What you are looking for will be in one of the following categories:

  (a) the BIOS bug
  (b) a pilot whose activity is at the origin of the processor target lock
  (c) a defect in hardware (temperature, voltage, dust, RFI, pure and simple borkedness...)? I also wonder about default CPU)
  Therefore, check the drivers
  Then check the inside of the species (temperature, voltage, dust, etc.).
  Then run tests of stress of material

  Try this free video stress test: http://www.ozone3d.net/benchmarks/fur/
  Try this free stress test: OSS - GIMPS

  CPU Stress Tests:
  Just do 1 or 2 tests in most circumstances. I have not used one of these tests myself, so I listed everything I could find.
  - http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=19182&lang=eng
  - http://7byte.com/index.php?page=hotcpu
  - http://www.7byte.com/index.php?page=burnin64
  - http://www.overclock.net/general-processor-discussions/657486-cpu-stress-test.html
  - http://www.fossiltoys.com/cpuload.html
  - http://www.pcworld.com/downloads/file/fid, 7146-order, 1 page, 1-c, alldownloads/description.html
  - http://www.overclock.net/general-processor-discussions/657486-cpu-stress-test.html
  - http://majorgeeks.com/CPU_Stability_Test_d215.html
  - http://www.xtremesystems.org/forums/showthread.php?t=201670
  -l' or the tests suggested at this link are bootable: http://www.techsupportforum.com/forums/f15/headless-cpu-stress-testing-393435.html#post2232929

  Then try to replace parts.
  Then look for the version of your BIOS to see what changes have been made.

  Text courtesy of http://www.carrona.org/ Usasma

• My new HP laptop has a tactile mouse that drives me crazy. My documents will always big little to large whenever my hand approached the touchpad. How can I disable it?

  For example, I'm going to be typing a simple document with the size set to 100%. Then suddenly the document goes to, say, 67%, I bring it to 100%, then it goes to 150%.  It's pretty boring, but I clap my hands come near the touchpad (I guess that's what it's called - it's pretty much the mouse of the laptop). I want to disable this feature. Can you help me? I'm about to go back to my old computer because of this annoying feature.

  Beth

  For example, I'm going to be typing a simple document with the size set to 100%. Then suddenly the document goes to, say, 67%, I bring it to 100%, then it goes to 150%.  It's pretty boring, but I clap my hands come near the touchpad (I guess that's what it's called - it's pretty much the mouse of the laptop). I want to disable this feature. Can you help me? I'm about to go back to my old computer because of this annoying feature.

  Beth

  Hi Beth

  Because the keyboard is integrated in the housing of the computer laptop, something so simple that the vibration caused by typing can cause the touchpad the cursor or initiate a click, depending on sensitivity settings.

  You must disable the touchpad when typing. Most modern laptops provide an option or a keyboard shortcut to get there.

  The following keyboard shortcuts have been known to disable the touchpad on different systems. Press and hold down the Fn key and then press F3, F4, F6, F7, F9, or F12 to disable the Touchpad.

  Specific instructions, read the instructions for your system or contact the support of laptop manufacturers.

  HP Support forum - disable the Touchpad - 3 Pages

  http://h30434.www3.HP.com/T5/hardware/how-to-disable-touchpad/m-p/219314

  Concerning

• I have a big lock icon that drives me crazy.

  It appears on my monitor and will not go away. I tried what someone said and changed the resolution, but that does not work. Does anyone know how can I fix?

  Hello

  1. have you followed the steps suggested by BillSmithers?

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-performance/why-does-a-lock-appear-on-my-screen/2ea88501-56c4-4BCE-a3db-1e51ea0b3857

  I would ask post you your request in the same thread if the problem is not resolved.

• Error trivial Drives Me Crazy - ORA-00911: invalid character - Oracle 10 g

  I have no idea where I was wrong. I get this ORA-00911: invalid character
  I looked at the excerpt from tons of times, but could not find a glitch. Code appear nested into a TOAD
  

  CREATE TABLE RoomAssociates
  (
       roomAssociatesID           NUMBER(7)                                     , CONSTRAINT roomasso_roomassoid_pk                            PRIMARY KEY(roomAssociatesID)                                                         ,                                                     
       roomID                       NUMBER(7)                                        CONSTRAINT roomasso_roomid_nn                                NOT NULL                                                                                     ,
                                                                                         CONSTRAINT roomasso_roomid_fk                            FOREIGN KEY(roomID) REFERENCES Room(roomID) ON DELETE CASCADE               ,
       roomFacilityID              NUMBER(7)                                      CONSTRAINT roomasso_roomfid_nn                                NOT NULL                                                                                         ,
                                                                                         CONSTRAINT roomasso_roomfid _fk                             FOREIGN KEY(roomFacilityID) REFERENCES RoomFacility(roomFacilityID)          ,
       enSuitID                   NUMBER(7)                                         CONSTRAINT roomasso_ensuitid_nn                             NOT NULL                                                                                          ,
                                                                                         CONSTRAINT roomasso_ensuitid_fk                       FOREIGN KEY(enSuitID) REFERENCES EnSuit(enSuitID)
  );

  Now, this will work:

  CREATE TABLE RoomAssociates
  (
       roomAssociatesID           NUMBER(7)                                     , CONSTRAINT roomasso_roomassoid_pk                            PRIMARY KEY(roomAssociatesID)                                                         ,
       roomID                       NUMBER(7)                                        CONSTRAINT roomasso_roomid_nn                                NOT NULL                                                                                     ,
                                                                                         CONSTRAINT roomasso_roomid_fk                            FOREIGN KEY(roomID) REFERENCES Room(roomID) ON DELETE CASCADE               ,
       roomFacilityID              NUMBER(7)                                      CONSTRAINT roomasso_roomfid_nn                                NOT NULL                                                                                         ,
                                                                                         CONSTRAINT roomasso_roomfid_fk                             FOREIGN KEY(roomFacilityID) REFERENCES RoomFacility(roomFacilityID)          ,
       enSuitID                   NUMBER(7)                                         CONSTRAINT roomasso_ensuitid_nn                             NOT NULL                                                                                          ,
                                                                                         CONSTRAINT roomasso_ensuitid_fk                       FOREIGN KEY(enSuitID) REFERENCES EnSuit(enSuitID)
  );
  

  The error is here:

  CONSTRAINT roomasso_roomfid _fk
  

  Better formatting:

  CREATE TABLE RoomAssociates
  ( roomAssociatesID NUMBER(7), CONSTRAINT roomasso_roomassoid_pk PRIMARY KEY(roomAssociatesID),
    roomID           NUMBER(7)  CONSTRAINT roomasso_roomid_nn     NOT NULL,
                                CONSTRAINT roomasso_roomid_fk FOREIGN KEY(roomID) REFERENCES Room(roomID) ON DELETE CASCADE,
    roomFacilityID   NUMBER(7)  CONSTRAINT roomasso_roomfid_nn NOT NULL,
                                CONSTRAINT roomasso_roomfid_fk FOREIGN KEY(roomFacilityID) REFERENCES RoomFacility(roomFacilityID),
    enSuitID         NUMBER(7)  CONSTRAINT roomasso_ensuitid_nn     NOT NULL,
                                CONSTRAINT roomasso_ensuitid_fk FOREIGN KEY(enSuitID) REFERENCES EnSuit(enSuitID)
  );
  

  Max
  [My Italian blog Oracle | http://oracleitalia.wordpress.com/2009/12/18/table-elimination-oppure-join-elimination-lottimizzatore-si-libera-della-zavorra/]

  Published by: Massimo Ruocchio, December 19, 2009 12:05 AM

• "Stop error" suspected to cause driver corrupted for user installed DVD burner.

  I get a "BSOD" (blue screen of death) everytime I go out with my Philips DVD burner. Under XP Home on a Dell Dimension 2400. Installed this writer a couple of years ago and have used it without any problems, however started getting this error about 6 months ago. MS produced a report when I rebooted after the last incident - "you received this message because a device installed on your Windows computer driver stop unexpectedly." This type of error is referred to as a "stop error" that requires you to restart your computer. "I followed all the steps described in this report to address the cause of the erroor. However, one of the steps refers to "Uninstalling the driver", but it is a step of manned by menu windows which seems to me that it's not really uninstall the driver - it's just a procedure they wrote such fact, it (start - control panel - display categories - Perf. & Maint - system - hardware - device Mgr - disabling/uninstalling). After you follow these steps, you get a message from re - install the device by clicking on a box. In my view, the same driver is used. It is corrupt nothing has changed and I will continue to get this error. I would like to know where the real driver is located so I can delete it and then go online to download a new driver. However, because my o/s came pre-installed by Dell, MS isn't going to help (unless I pay for the help) and Dell won't help because they didn't install the unit and the Philips site is useless in trying to get technical information as to where their driver is on my hard drive. I checked Event Viewer - System Log and found 'Source = system error category' and the real codes of 4 parameters (addresses memory I think) [that MS would only be able to interpret] for this date and time. I might have to go the route of 'pay' people with MS, but before doing that I would try to fix it myself. Dell site will not download the driver that already exists on my HD and is the latest version. Tools Dell system does not include this unit in its analysis of material either. So - I hope that someone will be quite kind to give me any suggestions where to find this particular driver - I can't find anything that looks like a pilot in the Philips records. Thanks for any help offered too!

  Hello
   
  (1) what is the complete stop of exact\ error you get?
  (2) what you mean exactly by I get error on a blue screen when you quit using my Philips DVD burner?
  (3) burner DVD from Philips, you have, it's an internal or external DVD burner?
   
  See the methods mentioned below and check if that helps
   
  Method 1:
  How to solve problems of hardware and software drivers Windows XP
  http://support.Microsoft.com/kb/322205
   
  Method 2:
  Try to uninstall and reinstall the drivers
  Follow the steps mentioned below and check if that helps.
  (a) click Start, click run, type devmgmt.msc
  (b) expand CD-ROM/DVD-Rom drives.
  (c) make a right click on the Dvd drive and click on Uninstall.
  (d) restart the computer.
   
  Method 3:
  Try to download the drivers from the following Dell Web site and check if it helps.
  (a) click on the link below
  http://www.Dell.com/support/drivers/us/en/19/DriversHome/NeedProductSelection
   
  (b) select to choose from a list of all products Dell, click on desktop computers.
  (c) click the Dimension, and then select the model as a Dimension 2400 number                            
  (d) if the Philips Dvd burner is an external tries to download the firmware under removable storage called Philips in the above mentioned link.
   
  Hope this information helps.

• HOW CAN I FIX A SCREEN BLUE, WITH STOP ERROR CODE: 0X0000007E (0XC0000005, 0X89F24OAE, 0X8A953BA0, 0X8A95389C)

  HOW CAN I FIX A SCREEN BLUE, WITH STOP ERROR CODE: 0X0000007E (0XC0000005, 0X89F24OAE, 0X8A953BA0, 0X8A95389C)

  Hello

  Please do not type in capital letters because it's difficult to read and considered to be shouting.

  ---------------------------------------------------------------------------------------------------

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive download collected files and after shot/screenshot.
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  -------------------------------------------------------------------------

  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  (also Windows 7)
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  ===========================================================

  The system has RAID? If so, it's also very suspicious.

  This error is usually a driver problem and display adapter (video) driver is the most suspicious if she
  may be others. Antivirus/antispyware/security programs, equipment (heat) and major software problems
  can also cause the error. When you get to the section of the driver to use the Troubleshoot utility my generic
  methods in the next message and then return to the if necessary troubleshooting tool.

  Have you recently added hardware or drivers updated? Don't forget to look in Control Panel - Windows
  Updates to see if all drivers have been updated it. Other donor opportunities include the antivirus/anti-
  spyware/security programs.

  When you get to the pilot and sections of the memory of the troubleshooter check the following message to
  update drivers and memory test and then return to the troubleshooter if necessary.

  BCCode: 7F 0x0000007E which is also 0x1000007E

  Cause

  SYSTEM_THREAD_EXCEPTION_NOT_HANDLED bug control is a very common bug control. TO
  interpret, you must identify which exception has been generated.

  Common exception codes are:

  • 0xc0000005: STATUS_ACCESS_VIOLATION indicates a memory access violation has occurred.

  For a complete list of exception codes, see the Ntstatus.h file located in theinc directory
  the Microsoft Windows Driver Kit (WDK).

  Solve the problem

  If you do not have to debug this problem, you must use certain basic troubleshooting techniques.

  • Make sure you have enough disk space.
  • If a driver is identified in the bug check message, disable the driver or check with the
  • Reference of the manufacturer for driver updates.
  • Try changing video cards.
  • Check with your hardware vendor for updates to the BIOS.
  • Disable the BIOS memory options such as implementing caching or shading.

  If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2
  (the address of the exception) must identify the driver or function that caused the problem.

  If the exception code 0 x 80000003 occurs, a hard-coded breakpoint or assertion was hit, but the system
  has been launched with the /nodebug. switch. This problem should occur infrequently. If it occurs repeatedly,
  Make sure that a kernel debugger is connected and the system is booted with the Switch/DEBUG .

  In case of exception code 0 x 80000002, the trap frame provides additional information.

  If you do not know the specific cause of the exception, consider the following questions:

  • Hardware incompatibility. Make sure all new hardware that is installed is listed in the
  • List of Microsoft Windows Marketplace tested products.
  • Service driver or defective peripheral system. A service driver or defective peripheral system can be
  • responsible for this error. Hardware problems, such as the incompatibilities of the BIOS, memory, conflicts
  • and IRQ conflicts can also generate this error.

  If a driver is listed by name in the bug check message, disable or remove that driver. Disable
  or remove drivers or services that have been recently added. If the error occurs during startup
  sequence and the system partition is formatted with the NTFS file system, you may be able to use safe
  Mode to rename or to delete the faulty driver. If the driver is used as part of the system startup procedure
  in Safe Mode, you must start the computer by using the Recovery Console to access the file.

  If the problem is associated with Win32k.sys, the source of the error may be a third remote
  control program. If this software is installed, you can remove the boot of the computer service
  by using the Recovery Console, and then by removing the offending system service file.

  Check the system log in Event Viewer for additional error messages that might help identify the
  device or the driver that generated the bug check 0x7E.

  You can also disable memory cache BIOS may try to resolve the error. You should also
  Run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system.
  For more information about these procedures, see the manual of your computer.

  The error that generates this message may occur after the first reboot during Windows Setup, or
  Once the installation is complete. A possible cause of the error is lack of disk space for installation and system
  BIOS incompatibilities. For problems during the installation of Windows that are associated with the absence of disc
  space, reduce the number of files on the disk drive hard target. Find and delete any temporary
  the files that you do not have to have files hidden Internet, backup application and.chkfiles files that
  contain fragments of file saved to disk scans. You can also use another hard drive with more drive
  free space for the installation. You can solve the problems of BIOS by upgrading the version of the system BIOS.

  BCCode: 7F 0x00000007E who is also a 0x1000007E<-- read="" this="">
  * 1141.html? order = votes http://www.faultwire.com/solutions-fatal_error/System-thread-exception-not-HANDLED-0x0000007E-

  ----------------------------------------------------------------------------------------------------------------------

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard event viewer
  Windows. TIP - Options - Advanced filter allows you to see a time rather
  of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during ' blue screen of the.
  death ' crashes and displays information about all accidents of a table.
  Free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by drivers of old or damaged, in particular the video drivers
  However, there are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Does not work
  tell all possible driver issues).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Stop error BCCode: 124

  Hello;
  I have problem - see text type

  Signature of the problem
  Problem event name: BlueScreen
  OS version: 6.0.6002.2.2.0.256.1
  Locale ID: 1060

  Files helping to describe the problem (some files may be is no longer available)
  Mini072212 - 01.dmp
  SysData. XML
  Version.txt

  See a temporary copy of these files
  WARNING: If a virus or other security threat caused the problem, open a copy of file can harm your computer.

  Additional information about the problem
  BCCode: 124
  BCP1: 0000000000000000
  BCP2: FFFFFA80091F1030
  BCP3: 00000000F2000040
  BCP4: 0000000000000800
  OS version: 6_0_6002
  Service Pack: 2_0
  Product: 256_1
  Information about the server: 47e7912a-2006-4c97-b4c0-127a3cc93d19

  Please help - what can I do?

  Concerning
  Sebo

  Hello

  Could be heat related - try using a small fan to blow into the air intakes to see if that helps.
  It is just like it loses power or stop it in the normal way?

  Remove ALL power and reinstall all the memory cards and cables (both ends where possible).
  in fact, remove and replace - don't do not just tight. Remove the dust bunnies and clean the
  air vents. Check that fans are working (before and after opening the case). When your laptop on all the
  You can do is to reinstall the memory and clean the vents (still may try to add a small fan as a
  test).

  This sounds like material so if the above does not help you then probably need help
  a real computer store (not the leeks and the glances at a Best Buy or other stores) or the
  Support of system Maker.

  ===========================================================

  Pick up the pieces after a computer crash
  http://Windows.Microsoft.com/en-us/Windows-Vista/picking-up-the-pieces-after-a-computer-crash

  Check this thread for more information on using BlueScreenView, MyEventViewer and other
  Troubleshooting BlueScreens - top 3 responses (+ 1 other) methods.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system/blue-screen-plug-and-play-detected-an-error-most/3deab2fa-4000-4136-8c78-a3d22b1db009

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
  for the office or in the Documents folder and download them from there.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive to upload collected files
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  ----------------------------------------------------------

  BCCode: 124 0 x 00000124

  This is usually heat related, faulty hardware, memory, or processor even if it is
  "possible" he is associated (rare) driver. To be able to remove ALL and reinstall all the cards, memory
  and cables (at both ends) - actually delete and replace - are not just tight. Ensure
  the system has proper ventilation - add a small fan blowing in the contributions. Carefully
  Inspect the card mother and other cards for damage. Pay attention to the fatal material
  error implicitly. You may need a computer store real (not the leeks and glances at a BestBuy
  or other BigBox stores) or system manufacturer support.

  There has been a few cases where Norton/Symantec and other antivirus/security
  programs have caused this error.

  BCCode: 124 0 x 00000124

  Bug WHEA_UNCORRECTABLE_ERROR control has a value of 0 x 00000124. This bug
  verification indicates that an unrecoverable hardware error has occurred. This bug check uses the error
  data provided by the error Architecture WHEA (Windows Hardware).

  0 x 00000124<-- read="" this="">
  * 1289.html http://www.faultwire.com/solutions-fatal_error/the-System-encountered-an-uncorrectable-Hardware-Error-0x00000124-

  =========================================

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard event viewer
  Windows. TIP - Options - Advanced filter allows you to see a time rather
  of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during ' blue screen of the.
  death ' crashes and displays information about all accidents of a table.
  Free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by drivers of old or damaged, in particular the video drivers
  However, there are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Does not work
  tell all possible driver issues).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Stop error code blue screen: STOP: 0x000000F5

  I am a student and I take 2 of my classes online.  As soon as I decided to take my classes online my computer starts to work again. I can't afford to take it to the cause of Squad of geek I'm behind in my classes. It happened already, blue screens, and I was about to start my classes then instead of he sends to a diagnosis, I thought I could solve the problem by simply installing a new hard drive. If that's what I did. About a week later, I got another blue screen and since I had just put the new hard drive and a warranty, I got and they fixed, does not really enter in what the problem was. Now about a month has passed and the dreaded blue screen is back. This time that I wrote all the error codes and everything I did to try to solve the problem. I guess only through diagnostic tests, and to install a new hard drive was a mistake, given that I spent $260 and the problem is not resolved. In any case, I'm sorry I got carried away with the details, but I'm desperate! Last night, I had the first blue screen and read it.  The usual "a problem has been detected and windows were shut down to prevent damage to your computer.

  Then he said (and this was the first and only time I've seen this message) "run a system diagnostic utility supplied by your hardware manufacturer. In particular, to achieve a memory check, and check memory faulty or incompatible. Try to change your video card. "And then the usual"disable any hardware or drivers and software, etc... Technical information: STOP: 0x0000007F (0x00000000, 0x00000000, 0x00000000, 0x00000000).  Then, I started it in safe mode w/network, ran windows memory diagnostic tool and it found nothing. Then I tried Microsoft fix google and I change video card. Ending me upgoing in the properties of my video card to find out information about the pilot. Somehow, I ended up on Intel' support and found a newer driver for my video card, so I downloaded it. But then I got the blue screen again. This time it read; "A problem has been detected etc..  FLTMGR_FILE_SYSTEM with Tech Info STOP: 0x000000F5 (0x0000006E, 0x87AD62F8, 0x87AD62C8, 0x00000000). Can you please tell me what is happening so I can solve this problem once and for all! Or should I just invest in a new computer?   Thank you for your time.

  Hello

  Since this has happened material suspect in particular hard drive and anything
  report (such as the motherboard and wiring) - also, malware or same antivirus/anti -.
  spyware/security programs.

  ------------------------------------

  You have ZoneAlarm or any 3rd party firewall installed? If so, this could be the cause.
  Other antivirus/security programs could be at least partially responsible.

  This fix "could" apply however do not use if you are quite safe.

  Two drivers of platform using WFP (Windows Filtering) causes a computer crash when the
  computer running Windows Vista, Windows 7 or Windows Server 2008
  http://support.Microsoft.com/kb/979278

  Check also:

  The General causes of errors "STOP 0x0000007F" (applies to Vista and Windows 7 as well)
  http://support.Microsoft.com/kb/137539

  ===========================================================

  Pick up the pieces after a computer breakdown - see what to do if Windows won't start correctly
  http://Windows.Microsoft.com/en-us/Windows-Vista/picking-up-the-pieces-after-a-computer-crash

  For the methods of troubleshooting blue screen using BlueScreenView and MyEventViewer see my answers
  If this thread - top 3 RESPONSES (+ 1 other).

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system/blue-screen-plug-and-play-detected-an-error-most/3deab2fa-4000-4136-8c78-a3d22b1db009

  We can analyze the minidumps if make you it available the onedrive or another file
  sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
  for the office or in the Documents folder and download them from there.

  Adding files to your OneDrive
  http://Windows.Microsoft.com/en-us/Windows-8/getting-started-onedrive-tutorial

  A disk - sharing files and folders and change the permissions
  http://Windows.Microsoft.com/en-us/onedrive/share-file-folder

  ZIP or download the content of the C:\Windows\minidump

  Use OneDrive to upload collected files

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  ----------------------------------------------------

  BCCode: 0x0000007f 7F

  Have you added a hardware or drivers updated recently? Check Control Panel - Windows
  Updates to see if all drivers have been updated it just before what is going on has begun.

  For 7f - this could be a problem of material such as uncomfortable cards or memory, while there are
  other causes. Power electric low could also lead to this. Use the troubleshooters above and below
  and when you get to the drivers and memory sections refer to my next message below and then
  return if necessary troubleshooting services

  If a PC remove ALL power. Opening the case, remove and reinstall all memory cards and ALL
  cable (try not just to close) on both ends if they are accessible and on the device ends if not
  (remove the cables and the resettlement of help them to eliminate minor corrosion).

  If a laptop or a PC, you will need to take a shop (not BestBuy or other BigBox stores) or your
  Support of the machine system.

  ----------------------------------------------------------------------

  BCCode: 7F 0x0000007F which is the same as 0x1000007F

  UNEXPECTED_KERNEL_MODE_TRAP bug control has a value of 0x0000007F. This bug check indicates that the Intel CPU generated a trap and the kernel could not catch this trap.

  This trap might be a bound trap (a trap the kernel is not allowed to capture) or adouble foul(an error occurred during the processing of an earlier fault, which always results in a failure of the system).

  Parameters

  The first parameter that is displayed on the blue screen indicates the number of trap.

  The most common trap codes are the following:

  • 0x00000000 or division by zero error, indicates that a DIV instruction is executed and the divisor is zero. Memory corruption, other hardware problems or software failures can cause this error.
  • 0 x 00000004, or overflow, occurs when the processor executes a call to an interrupt handler when the overflow (OF) is flag set.
  • 0x00000005, or limits check fault, indicates that the processor, then executing a BOUND instruction, determines that the operand exceeds the specified limits. A BOUND instruction ensures that a signed array index is within a certain range.
  • 0 x 00000006 or Opcode not valid, indicates that the processor attempts to execute an invalid instruction. This error occurs generally when the instruction pointer is corrupted and point to the wrong address. The most common cause of this error is hardware memory corruption.
  • 0x00000008 or Double fault, indicates that an exception occurs during a call to the previous exception handler. In general, two exceptions are handled in series. However, there are several exceptions that cannot be handled serially, and in this case, the processor signals a double fault. There are two common causes of a double fault

  CAUSE

  0x7F bug check occurs after the installation of a faulty or incompatible hardware (including memory) or if installed hardware fails.

  A double fault can occur when the kernel stack overflows. This overflow occurs if multiple drivers are attached to the same battery. For example, if two file system filter drivers are associated to the same stack and then again the recursively of file system, the capacity of the battery.

  Solve the problem

  Troubleshooting: If you have recently added the material to the computer, remove to see if the error recurs. If the hardware failure existing, remove or replace the faulty component. Run the diagnostics of material that does not have the system manufacturer supplies to determine which hardware component.

  The scanner memory is particularly important. Faulty or incompatible memory can cause this bug check. For more information on these procedures, see the manual of your computer. Check that all the cards in the computer are well calibrated. Use an ink eraser or electrical contact treatment, available in electronic supply stores, to ensure the adapter card contacts are clean.

  If the error appears on a newly installed system, check the availability of updates for BIOS, SCSI, or card network controller. These updates are generally available on the Web site or the hardware manufacturer BBS.

  Confirm that all hard drives, hard disk controllers and SCSI adapters are listed in the list of the products tested Microsoft Windows market.

  If the error occurred after the installation of a new or updated device driver, you should remove or replace the driver. If, in this circumstance, the error occurs during the startup sequence and the system partition is formatted with NTFS, you may be able to use Safe Mode to rename or to delete the faulty driver. If the driver is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console in order to access the file.

  Also to restart your computer and press F8 to character-based menu that displays the choice of operating system. In the menuof Advanced Options , select thelast known good Configuration option. This option is most effective when you add a single driver or service at a time.

  Overclocking (setting of the CPU to run at a speed higher than the nominal specification) can cause this error. If you have overclocked to the computer that is experiencing the error, return the CPU to default clock speed setting.

  Check the system log in Event Viewer for additional error messages that might help identify the device or driver that generated the error. You can also disable caching memory BIOS to try to resolve the problem.

  If you have encountered this error during the upgrade to a new version of the Windows operating system, the error can be caused by a device driver, system service, an anti-virus or a backup tool that is not compatible with the new version. If possible, remove all third-party device drivers and system services and disable all antivirus before upgrade you. Contact the software manufacturer for updates of these tools. Also, make sure that you have installed the latest Windows Service Pack.

  Finally, if all of the steps above do not resolve the error, take the system motherboard to a repair for the diagnostic facility. A crack, a scratched trace, or a defective component on the motherboard can also cause this error.

  BCCode: 7F 0x0000007F which is the same as 0x1000007F<-- read="" this="">
  * 1304.html http://www.faultwire.com/solutions-fatal_error/Run-a-System-diagnostic-Utility-supplied-by-your-0x1000007F-

  -----------------------------------------------------------------------------------------------------------------------

  BCCode: F5 0x000000F5

  The most common cause of this problem is a problem of hard disk or hardware connected to the drive
  as the mother/controller card and cabling. Other possible causes include antispyware/antivirus/security programs.

  Bug Check 0xF5: FLTMGR_FILE_SYSTEM

  Bug FLTMGR_FILE_SYSTEM control has a value of 0x000000F5. This indicates that a fatal error has occurred in the Filter Manager.

  Important information if you have received a STOP Code

  If you have received a blue screen error, or stop code, the computer stopped abruptly to protect against data loss. A hardware device, its driver or software might have caused this error. If your copy of Windows is shipped with your computer, contact your computer manufacturer. If you purchased Windows separately from your computer, Microsoft provides support.
  To find contact information for Microsoft or the manufacturer of your computer, Contact Support.

  If you have experience with computers and try to recover from this error, follow the steps in the Microsoft article solution STOP (blue screen) errors in Windows.

  The following actions could prevent a mistake like this does not happen:

  1. Download and install updates for your computer from Windows Update device drivers.
  2. Scan your computer for computer viruses.
  3. Check your hard drive for errors.

  FLTMGR_FILE_SYSTEM settings

  The following settings are displayed on the blue screen. Parameter 1 indicates the type of violation. The meaning of the other parameters depends on the value of parameter 1.

  See this link for the parameters or the Faultwire link below.
  http://msdn.Microsoft.com/en-us/library/ff560383 (v = VS. 85) .aspx

  Cause

  The cause of the problem is indicated by the value of parameter 1. See the table in the settings section.

  
  Resolution

  If parameter 1 is 0 x 66, you can debug this problem by checking that your minifilter driver recorded a reminder after the operation for this operation. The current operation are in the structure of recall data. (See parameter 2). Use of the ! fltkd.cbd the debugger extension.

  If parameter 1 is 0 x 67, you must verify that you do not have a leak pool unpaginated somewhere in the system.

  If parameter 1 is equal to 0x6A, make sure that your minifilter driver does not refer to this file object (see parameter 2) to get a handle at any time during the processing of your minifilter of this operation.

  If parameter 1 is equal to 0x6B or 0x6C, then a State internal unrecoverable error has occurred causing the operating system bug control.

  If parameter 1 is equal to 0x6D, make sure that your minifilter driver does not call FltReleaseContext too many times the specific context (see parameter 2).

  If parameter 1 is equal to 0x6E, make sure your minifilter driver does not call FltReferenceContext after the context has been removed (see parameter 2).

  BCCode: F5 0x000000F5<-- read="" this="">
  http://www.faultwire.com/solutions-fatal_error/FLTMGR-file-system-0x000000F5-* 1242.html

  ============================================================

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------
  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do without if needed fail or the Vista DVD or recovery command prompt mode
  Options if your system was installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Help blue screen Stop error

  If it received Blue error screen and auto restart past since I did the sp1 update. I have Windows Vista-32 and the error I get is:

  Stop: 0x0000008E (0xc0000005, 0x93F042F9, 0X92CD3C50, 0x00000000)

  Win32k.sys - address 93F042F9 base at 93E00000, DateStamp 4549aea2

  I need help here. I'm going nuts trying to figure this out. I would appreciate your help. Thank you.

  Hello

  Two main causes of this blue screen video drivers and BIOS - check with the system manufacturer
  Site for graphics (Video) card and BIOS, then on site of the manufacturer of the device for the last video. It may be
  other pilots to check there. Disable the installation of self as those who are older and if
  Updates Windows suggests a pilot just HIDE. Antivirus is another possibility.

  See methods of update driver generic in the next message.

  BCCode: 8th 0x0000008E is the same as 0x1000008E

  Cause

  Bug KERNEL_MODE_EXCEPTION_NOT_HANDLED control is a very common bug control. To interpret
  You must identify which exception has been generated.

  Common exception codes are:

  • 0xc0000005: STATUS_ACCESS_VIOLATION indicates that a memory access violation has occurred.

  Solve the problem

  If you do not have to debug this problem, you must use certain basic troubleshooting techniques:

  • Make sure you have enough disk space.
  • If a driver is identified in the bug check message, disable the driver or check with the
  • Reference of the manufacturer for driver updates.
  • Try changing video cards.
  • Check with your hardware vendor for updates to the BIOS.
  • Disable the BIOS memory options such as implementing caching or shading.

  If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2
  (the address of the exception) must identify the driver or function that caused the problem.

  If you do not know the specific cause of the exception, consider the following:

  • Hardware incompatibility. Make sure that all new equipment installed is listed in the
  • List of Microsoft Windows Marketplace tested products.
  • Service driver or defective peripheral system. A service driver or defective peripheral system can be
  • responsible for this error. Hardware problems, such as the incompatibilities of the BIOS, memory, conflicts
  • and IRQ conflicts can also generate this error.

  If the verification of the message bug list a driver by name, disable or remove that driver. Also, clear or
  remove drivers or services that have been recently added. If the error occurs during startup
  sequence and the system partition is formatted with the NTFS file system, you may be able to use
  Safe mode to rename or to delete the faulty driver. If the driver is used as part of the system startup
  Mode process without failure, you must start the computer by using the Recovery Console to access to the
  file.

  If the problem is associated with Win32k.sys, the source of the error may be a third remote
  control program. If this software is installed, you can remove the service from the system startup of
  using the recovery and then Console by removing the system service file incriminated.

  Check the system log in Event Viewer for additional error messages that might help identify the
  device or the driver that generated the bug check 0x1E. You can disable the cache in memory of the BIOS to try
  to resolve the error. You must also run the diagnostics of equipment, in particular the scanner memory, which
  the manufacturer of the system provides. For more information about these procedures, see the owner
  Manual for your computer.

  The error that generates this message may occur after the first reboot during Windows installation or after
  The Setup is completed. A possible cause of the error is lack of disk space for installation and the system BIOS incompatibilities. For problems during the installation of Windows that are associated with the lack of disk space,
  reduce the number of files on the disk drive hard target. Search for and delete temporary files that
  you do not have to have, the files hidden Internet, backup application files and .chk files that contain saved
  fragments of files on the disc scans. You can also use another drive to hard disk with more free space for the
  installation.

  You can solve the problems of BIOS by upgrading the version of the system BIOS

  =============================================

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  -------------------------------------------------------------------------

  It comes to my convenience store generic bluescreen:

  Here are a few ways to possibly fix the blue screen issue. If you could give the info to blue screen
  This would help. Such as ITC and 4 others entered at the bottom left. And another error
  information such as the STOP codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death' crashes, and
  Displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, drivers particularly video drivers but it
  are other causes.

  You can do without if needed fail or the Vista DVD or recovery command prompt mode
  Options if your system was installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• HOW DI I STOP ERROR 0X0000007E 0XC0000005, 0X8A27FB97, 0X859C1BA8, AND 0X859C18A4 CODE

  HOW DI I STOP 0X0000007E 0XC0000005, 0X8A27FB97, 0X859C1BA8, AND 0X859C18A4 ERROR CODE OCCUR?

  Hello

  This error is usually a driver problem and display adapter (video) driver is the most suspicious if she
  may be others. Antivirus/antispyware/security programs, equipment (heat) and major software problems
  can also cause the error. When you get to the section of the driver to use the Troubleshoot utility my generic
  methods in the next message and then return to the if necessary troubleshooting tool.

  Have you recently added hardware or drivers updated? Don't forget to look in Control Panel - Windows
  Updates to see if all drivers have been updated it. Other donor opportunities include the antivirus/anti-
  spyware/security programs.

  When you get to the pilot and sections of the memory of the troubleshooter check the following message to
  update drivers and memory test and then return to the troubleshooter if necessary.

  BCCode: 7F 0x0000007E

  Cause

  SYSTEM_THREAD_EXCEPTION_NOT_HANDLED bug control is a very common bug control. To interpret it, you must identify which exception has been generated.

  Common exception codes are:

  • 0xc0000005: STATUS_ACCESS_VIOLATION indicates a memory access violation has occurred.

  For a complete list of exception codes, see the Ntstatus.h file located in the directory Inc. of the Microsoft Windows Driver Kit (WDK).

  Solve the problem

  If you do not have to debug this problem, you must use certain basic troubleshooting techniques.

  • Make sure you have enough disk space.
  • If a driver is identified in the bug check message, disable the driver or check with the manufacturer for driver updates.
  • Try changing video cards.
  • Check with your hardware vendor for updates to the BIOS.
  • Disable the BIOS memory options such as implementing caching or shading.

  If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2 (the address of the exception) should identify the driver or function that caused the problem.

  If exception code 0 x 80000003 occurs, a hard-coded breakpoint or assertion was hit, but the system was launched with the /nodebug. switch. This problem should occur infrequently. If it occurs repeatedly, make sure that a kernel debugger is connected and the system is booted with the Switch/DEBUG .

  In case of exception code 0 x 80000002, the trap frame provides additional information.

  If you do not know the specific cause of the exception, consider the following questions:

  • Hardware incompatibility. Ensure that any new hardware that is installed is listed in the list of the products tested Microsoft Windows market.
  • Service driver or defective peripheral system. A chauffeur service or defective peripheral system could be responsible for this error. The hardware problems, such as BIOS incompatibilities, conflicts of memory and IRQ conflicts can also generate this error.

  If a driver is listed by name in the bug check message, disable or remove that driver. Disable or remove drivers or services that have been recently added. If the error occurs during the startup sequence and the system partition is formatted with the NTFS file system, you may be able to use Safe Mode to rename or to delete the faulty driver. If the driver is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console to access the file.

  If the problem is associated with Win32k.sys, the source of the error may be a third-party remote control program. If this software is installed, you can remove the service by starting the computer by using the recovery and then Console by removing the offending system service file.

  Check the system log in Event Viewer for additional error messages that might help identify the device or driver responsible for control of bug 0x7E.

  You can also disable memory cache BIOS may try to resolve the error. You must also run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system. For more information about these procedures, see the manual of your computer.

  The error that generates this message may occur after the first reboot during Windows Setup, or after installation is complete. A possible cause of the error is lack of disk space for installation and the system BIOS incompatibilities. For any problems during the installation of Windows that are associated with lack of disk space, reduce the number of files on the hard disk drive target. Search and delete temporary files that you do not have to have, files hidden Internet, application backup files and files saved .chk , which contain fragments of files on disk scans. You can also use an another hard disk drive with more free space for the installation. You can solve the problems of BIOS by upgrading the version of the system BIOS.

  -------------------------------------------------------------------------

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  Here are a few ways to possibly fix the blue screen issue. If you could give the info from the blue screen that would be
  Help. Such as ITC and 4 others entered at the bottom left. And any other information such as STOP error
  codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  Displays information on all the "crash" of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged drivers, video drivers in particular, but there are other causes.

  You can follow these steps in the Safe Mode if necessary or the command prompt Vista DVD or Options of recovery if your
  system installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, 3rd party keyboard and
  smile, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• How can I fix error that starts with Ox0000007E?

  When I try to start my computer, I sometimes get the error Ox0000007E (Oxc0000005, Oxe628D36, Ox887937D8, Ox887934D4).  I have a PC HP Pavilion Media Center m8300f (HP).  The operating system is Windows Vista.  What do these errors mean and how can I fix.

  Thank you

  Hello

  Please re - install your chipset drivers.

   
  See the link below link.
   
  How to fix bluescreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
  http://support.Microsoft.com/kb/958233
   
  It may be useful

• Blue screen Stop error code 0x000000DA in XP PRO X 64. The driver's mismanagement of system PTEs.

  Seat of Windows XP PRO X 64. After you uninstall old graphics drivers, PC does not long enough to install new graphics drivers and continually, it passes loop BSoD after windows login. I disabled the effect loop so I can display the blue screen message. I read that its actually the file videoprt.sys in service pack 2. don't forget that this is the version 64-bit (located in windows/system32/drivers) who has a bug (ver 5.2.3790.3959). I did some research to get the version 5.2.3790.1830, but I can't download it to replace the current one. Does anyone have a solution for me? Currently, my PC has no graphics driver installed because of this problem.

  The minidump file showed a SYSTEM_PTE_MISUSE (da) stop error referring to the vgapnp.sys (VGA/Super VGA video driver):

  BUCKET_ID: X64_0xDA_vgapnp! VgaStartIO + 226

  The process that crashed was the SteelSeriesEngine.exe:

  Nom_processus: SteelSeriesEngi

  If the SteelSeriesEngine.exe is the process that is constantly crashing and then disable this process to start as there may be a conflict between the SteelSeriesEngine.exe and the vgapnp.sys.

  You could try renaming the SteelSeriesEngine.exe in the directory of the program SteelSeriesEngine to something like SteelSeriesEngine.old