Stop playback of flv leaving a frame without a bunch of code

Similar Questions

• AS3: How an instance of flvplayback stop playing when you leave its frame in the timeline?

  I created a small theatre program and it is working very well, but I cannot for the life of me understand why it works without additional code.

  I have a timeline with frames 5 and last 4 executives have a different instance of an animation flash (flvplayback) in them: all of them charge a different movie as its source and I don't give instance names to one of them.

  To get to one of these frameworks, there are 4 buttons and the eventlistener to click a button calls a function that specifies which image to go to and stop at the.  Since each flvplayback has autoplay set to 'true', the movie starts to play when you enter its framework.  If I click a different button to get a different picture, this first film stops play and the video in the 2nd starts frame.  I have not any actionscript in saying the first movie to stop and I can't find anything in the AS3 reference that suggests that the flvplayback component could work this way.  Why didn't I tell an flvplayback instance programmatically to stop when I'm out of its frame in the timeline?

  Thank you

  Sean

  If you leave its framework there are more.  But from other postings I've seen, people most often ask why he always plays because they can hear the continuous sound even if they left the frame.  I think in your case what could have to do with you based on components in the adjacent blocks, such that you essentially load a new source in the player.  There is an anomaly MNI Flash where if you place instances of the same object in adjacent frames, the latter inherits the properties of the former, essentially becoming it.  Then you fall into this scenario where essentially the same player is told to change what he is playing.  You could try to stagger the instances with empty frames between and see whether you get similar results.

• Media center stopped playback recorded movies

  Media center stopped playback recorded movies

  Hello, boy H

  We need more information, on the right, click on the event and select copy > copy the information in the form of text, then paste it here.

  This has started recently or has it been the ongoing problem?

  If the latter, try to perform a restore of the system when he worked: http://windows.microsoft.com/en-US/windows-vista/What-is-System-Restore

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Media Player 12 will stop playback automatically at the launch of compatible webcam app or video game

  It seems to be a logic in WMP 12 which automatically stops playback of video or music when another process wants to play another video or audio stream. Music playback stops when I run a video game, and a lot more annoyingly, it stops whenever I have a video stream that is played in Flash Player in my browser. I can't find the relevant controls in the options of WMP.

  Is this really a WMP feature that cannot be disabled?

  I use AMD / ATI drivers with transcoding video installed, can it be a cause?

  Hi Lucas,.

  You can try changing the settings in exclusive Mode:

  1. Right click on the speaker icon in the notification bar.
  2. Select the playback device
  3. Select your device and click Properties
  4. Select the Advanced tab
  5. Deselect the options in exclusive Mode
  6. Click apply
  7. Click OK

  Let us know if that helps.

• Error #2007: HitTestObject parameter must be non-null error comes if I'm going to another frame without success

  Error #2007: HitTestObject parameter must be non-null

  at flash.display::DisplayObject/_hitTest()

  at flash.display::DisplayObject/hitTestObject()

  but my hitTestObject works well in the frame 4 displays error when I goto another frame without hitting the object

  If I touched the subject, then I goto frame 1 this error does not appear. This means that the code made mandatory hit error otherwise. How to get rid of this

  var live: myscrew = new myscrew();

  addEventListener (Event.ENTER_FRAME, checkCollision);

  function checkCollision(event:Event) {}

  star test against crescent

  If (keys.hitTestObject (chest)) {}

  Screw.x = 100;

  Screw.y = 100;

  addChild (screw);

  removeChild (chest);

  }

  }

  This code used to goto frame 1.

  arrowtwo.addEventListener (MouseEvent.CLICK, fl_MouseClickHandler_two222);

  function fl_MouseClickHandler_two222(event:MouseEvent):void

  {

  gotoAndStop (1);

  }

  Remove the event listener before you change settings.

  removeEventListener (Event.ENTER_FRAME, checkCollision);

• How to set a picture FRAME without the picture?

  Before the new version of 2015.1, when I placed a picture on a page, then I could adjust the size of the frame without at the same time, adjusting the actual image. THEN double-click on and adjust the image without changing the framework... it has changed... Please help!

  Use the crop tool.

• Images often open bridge in the form of black frames without content.

  Images often open bridge in the form of black frames without content. The image may appear when enlarged or reduced, but in normal view, the framing will be black. The only way I am able to fix this problem is to restart photoshop. What can I do to prevent this?

  Have you tried turning off your GPU in Photoshop and perhaps also Bridge preferences?

• buttons will not work if you leave the frame back button

  I have a few simple buttons that work very well until I leave the frame, the buttons are on a go to another frame. When I come back, the buttons are dead. This is how set up listeners and managers:

  for the buttons turn screen event listeners

  detailsMovieClip_mc.tour0.addEventListener (MouseEvent.CLICK, tour0_click);

  detailsMovieClip_mc.tour0.addEventListener (MouseEvent.ROLL_OVER, tour0_over);

  detailsMovieClip_mc.tour0.addEventListener (MouseEvent.ROLL_OUT, tour0_out);

  function tour0_click(Event:MouseEvent):void

  {

  do something

  }

  function tour0_over(Event:MouseEvent):void

  {

  do something

  }

  function tour0_out(Event:MouseEvent):void

  {

  do something

  }

  no idea why this is happening?

  The most likely reason is that you are going to an image where the buttons do not exist and then return to a framework where they exist, but are not one where they have their headphones to events assigned to them.

• My Windows 7 laptop suddenly stopped recognizing a device (mobile phone), apparently due to the error Code 43!

  My Windows 7 laptop suddenly stopped recognizing a device (mobile phone), apparently due to the error Code 43! Any ideas how to sort?

  Thank you George for taking the time to answer. I had already tried everything you suggested, but to no avail. I've sorted it now though. It was, quite simply, a defective USB cable!

• When the user leaves the frame stop .flv

  I know that the solution is probably disconcerting, but I had very little experience using video in flash.
  
  I have a flash animation that allows the user to watch a video, but it can jump by pressing a button, moving them to another frame.
  
  The problem is, the video continues to play while the user is on a different image, and the user can hear the sound of the video clip. Is there a way to stop the video when the playback head moves in a different setting?
  
  I looked a the clear method, but that doesn't seem to do what I'm looking for.
  
  Any suggestions would be most appreciated.

  Moreover, I found the answer where someone said on this thread in the future. The questions was me not look under the right object, rather than the search of properties and methods for the video it is in what we call netStream. You use the method of "pause" to stop... it could be a stop of the method too, have not checked yet, I think it's a moot point in my case at least. Here's the code.

• Need stop playback of a component FLVPlayback leave what page!

  I have a movieclip playing as auto start on the first page of my site.  The d.c. component of play when I leave the page.  How can I stop the movie playback if it has not completed when left navigation page is called.  I look and am unable to find such an event, using a FLVPlayback component.  Currently, there is no code in actionscript to display here.

  Thank you

  If I understand what you're trying to do, the following code is much more effective. Could be even better:

  stop();
  import flash.events.*;
  import flash.display.*;
  import fl.video.*;
  import fl.video.FLVPlayback;
  
  vTinesDayBtn.addEventListener(MouseEvent.CLICK, moveToFrame);
  engageBtn.addEventListener(MouseEvent.CLICK, moveToFrame);
  weddingsBtn.addEventListener(MouseEvent.CLICK, moveToFrame);
  birthsBtn.addEventListener(MouseEvent.CLICK, moveToFrame);
  bDaysBtn.addEventListener(MouseEvent.CLICK, moveToFrame);
  graduBtn.addEventListener(MouseEvent.CLICK, moveToFrame);
  annivBtn.addEventListener(MouseEvent.CLICK, moveToFrame);
  spEventsBtn.addEventListener(MouseEvent.CLICK, moveToFrame);
  memorialsBtn.addEventListener(MouseEvent.CLICK, moveToFrame);
  
  vTinesDayBtn.targetFrame = 20;
  engageBtn.targetFrame = 25;
  weddingsBtn.targetFrame = 30;
  birthsBtn.targetFrame = 35;
  bDaysBtn.targetFrame = 40;
  graduBtn.targetFrame = 45;
  annivBtn.targetFrame = 50;
  spEventsBtn.targetFrame = 55;
  memorialsBtn.targetFrame = 60;
  
  function moveToFrame(e:MouseEvent):void {
       if(vidPlay) vidPlay.stop();
       gotoAndStop(e.currentTarget.targetFrame);
  }
  

• Stop the flv leaving a framework

  I want to stop a video of the game, when you leave a framework

  I tried to use SoundMixer.stopAll (); but it doesn't stop the sound

  I think my video's always streaming in the background, because im starting to notice performance problems when I go back and open the video again

  the site becomes very slow.

  Help, please

  I'm sorry, my answer is maybe too late.

  In any case, I guess you must stop streaming by calling the close() method.

  Take a look on

  http://livedocs.Adobe.com/Flash/9.0/ActionScriptLangRefV3/Flash/NET/NetStream.html#include ExamplesSummary

  Then, you can call stream.close () to stop it.

  Or if you have a component FLVPlayback instance on the stage, then you must call stop() on it.

  For example, if the flvPlayBack on stage component was named "myVideoObj" then you must call myVideoObj.stop ();

  Maybe you need to set

  myVideoObj.autoPlay = false;

  Good luck

  getnaleen

• How can I stop the audio playback in plugins shipped from start without be clicked?

  I try to used audio plugins in my podcasts that are posted each week. But when I add a new plugin each week he begins to play as soon as you click on the site. I have six programs playing at once. How can I configure the settings so that must first click on the play button for them to start playing?

  Change audioplay to autoplay = "false"

  Nancy O.
  

• Stop playback for crossfade transitions

  CS5 is usually solid as a rock, and the mercury playback engine works great (have a 285GTX), the problem I have is when I put in a cross fader (or any dissolution) the audio continues to play, but video stutters and then stops.  The CPU usage is not change, so it doesn't push the CPUs, and I tried not less demanding 720 projects p in cs4 that had no problem reading in real-time, and they fail every time that they hit a dissolution (be it a hardware or software rendering dissolve.)  I tried with or without reading of mercury and it has the same problem.

  Does anyone else have this problem?  Any help would be great.  Thank you

  Yep, this bug is connected. I think it's that I mentioned would be set "in a future update."

  I thought that maybe the same goes when I read this post.

  the_wine_snob wrote:

  Seems that, in a previous thread, or two, Jeremy has confirmed that there is a Bug in the Transitions in AVCHD. Don't remember the details, but I think that Adobe has been at work on obtaining a hotfix. Perhaps a search of this forum on the 'Transitions + AVCHD' and maybe the filter on people > Jeremy. I also think that I commented in at least one of these threads.

  Hunt

• Is it possible to stop firefox linux sometimes leaving a process running after output?

  I run Firefox 29, 0 - 5.fc19 on a BONE of 19 Fedora fully updated with the KDE Plasma desktop.
  When I want to listen to the radio from BBC iplayer service, I open firefox and go to the site http://www.bbc.co.uk/radio4 and click on 'Listen Live', and a retractable player creates and begins to play.
  If I don't want to see anything else, I close the firefox browser main leaving the retractable mower (child) firefox window, playing the Live BBC radio stream. But, if I may close this pop-out, I find that I can't restart Firefox because error message says that firefox is already running.

  To restart the browser, I use ksysguard to kill the process firefox - usually around 120 000 K in size - first.

  I have this a known bug?
  The only solution seems to be to launch another main firefox window before closing the iplayer pop-out player and then close firefox main. It is a problem because I do not always go through this rather obscure way of doing things.

  Hello, unfortunately it's currently a bug in the current version of firefox when you set your story to be erased at the stop of firefox (under options > privacy)-which is studied and train of attaches by the developers of mozilla with a high priority.