Stop rounding image carousel

Similar Questions

• help with image carousel

  I had this script for a controlled xml image carousel. It works really well, I just need to tweak it a bit so he could work as I want.

  I want to place the carousel in a certain area of the film. Is the only setting I see control where ' var floor: Number = 20; "but this only controls the vertical position. I need to check the horizontal position, now that he's just focused. See "xpos3D", I don't know what to do.

  I also want to keep to appear outside the frames I want it to appear. Now when I put the script in the film he appears in each image. How do I get it appear in some images of the film?  When I put "stop();" at the end of the keyframe it still shows in the frames after him.

  The last thing I need is to position the animation above the other layers.  At the moment, it appears below all other layers in the film.

  I don't know what parts to change this then of course I don't know what parts of post, it is why I write all this (hope I post code correctly, my first post).

  
  Tips on how to accomplish one of these very appreciated!

  //We use 70x70 sized images (change this if different for your images)
  const IMAGE_WIDTH:uint = 70;
  const IMAGE_HEIGHT:uint = 70;
   
  //Set the focal length
  var focalLength:Number = 400;
   
  //Set the vanishing point
  var vanishingPointX:Number = stage.stageWidth / 2;
  var vanishingPointY:Number = stage.stageHeight / 2;
   
  //The 3D floor for the images
  var floor:Number = 20;
   
  //We calculate the angleSpeed in the ENTER_FRAME listener
  var angleSpeed:Number = 0;
   
  //Radius of the circle
  var radius:Number = 200;
   
  //Specify the path to the XML file.
  //You can use my path or your own.
  var xmlFilePath:String = "3D-carousel-settings.xml";
   
  //We save the loaded XML to a variable
  var xml:XML;
   
  //This array will contain all the imageHolders
  var imageHolders:Array = new Array();
   
  //We want to know how many images have been loaded
  var numberOfLoadedImages:uint = 0;
   
  //The total number of images according to XML file
  var numberOfImages:uint = 0;
   
  //Load the XML file.
  var loader = new URLLoader();
  loader.load(new URLRequest(xmlFilePath));
   
  //We call the function xmlLoaded() when the loading is complete.
  loader.addEventListener(Event.COMPLETE, xmlLoaded);
   
  //This function is called when the XML file is loaded
  function xmlLoaded(e:Event):void {
   
       //Create a new XML object from the loaded XML data
       xml = new XML(loader.data);
       xml.ignoreWhitespace = true;
   
       //Call the function that loads the images
       loadImages();
  }
   
  //This function loads and creates holders for the images specified in the 3D-carousel-settings.xml
  function loadImages():void {
   
       //Get the total number of images from the XML file
       numberOfImages = xml.number_of_images;
   
       //Loop through the images found in the XML file
       for each (var image:XML in xml.images.image) {
   
            //Create a new image holder for an image
            var imageHolder:MovieClip = new MovieClip();
   
            //Create a loader that will load an image
            var imageLoader = new Loader();
   
            //Add the imageLoader to the imageHolder
            imageHolder.addChild(imageLoader);
   
            //We don't want to catch any mouse events from the loader
            imageHolder.mouseChildren = false;
   
            //Position the imageLoader so that the registration point of the holder is centered
            imageLoader.x = - (IMAGE_WIDTH / 2);
            imageLoader.y = - (IMAGE_HEIGHT / 2);
   
            //Save where the imageHolder should link to
            imageHolder.linkTo = image.link_to;
   
            //Add the imageHolder to the imageHolders array
            imageHolders.push(imageHolder);
   
            //Load the image
            imageLoader.load(new URLRequest(image.url));
   
            //Listen when the image is loaded
            imageLoader.contentLoaderInfo.addEventListener(Event.COMPLETE, imageLoaded);
       }
  }
   
  //This function is called when an image is loaded
  function imageLoaded(e:Event):void {
   
       //Update the number of loaded images
       numberOfLoadedImages++;
   
       //Set the bitmap smoothing to true for the image (we know that the loader's content is a bitmap).
       e.target.content.smoothing = true;
   
       //Check to see if this is the last image loaded
       if (numberOfLoadedImages == numberOfImages) {
   
            //Set up the carousel
            initializeCarousel();
       }
  }
  
  //This function is called when all the images have been loaded.
  //Now we are ready to create the 3D carousel.
  function initializeCarousel():void {
   
       //Calculate the angle difference between the images (in radians)
       var angleDifference:Number = Math.PI * (360 / numberOfImages) / 180;
   
       //Loop through the images
       for (var i:uint = 0; i < imageHolders.length; i++) {
   
            //Assign the imageHolder to a local variable
            var imageHolder:MovieClip = (MovieClip)(imageHolders[i]);
   
            //Get the angle for the image (we space the images evenly)
            var startingAngle:Number = angleDifference * i;
   
            //Position the imageHolder
            imageHolder.xpos3D = radius * Math.cos(startingAngle);
            imageHolder.zpos3D = radius * Math.sin(startingAngle);
            imageHolder.ypos3D = floor;
   
            //Set a "currentAngle" attribute for the imageHolder
            imageHolder.currentAngle = startingAngle;
   
            //Calculate the scale ratio for the imageHolder (the further the image -> the smaller the scale)
            var scaleRatio = focalLength/(focalLength + imageHolder.zpos3D);
   
            //Scale the imageHolder according to the scale ratio
            imageHolder.scaleX = imageHolder.scaleY = scaleRatio;
   
            //Set the alpha for the imageHolder
            imageHolder.alpha = 0.3;
   
            //We want to know when the mouse is over and out of the imageHolder
            imageHolder.addEventListener(MouseEvent.MOUSE_OVER, mouseOverImage);
            imageHolder.addEventListener(MouseEvent.MOUSE_OUT, mouseOutImage);
   
            //We also want to listen for the clicks
            imageHolder.addEventListener(MouseEvent.CLICK, imageClicked);
   
            //Position the imageHolder to the stage (from 3D to 2D coordinates)
            imageHolder.x = vanishingPointX + imageHolder.xpos3D * scaleRatio;
            imageHolder.y = vanishingPointY + imageHolder.ypos3D * scaleRatio;
   
            //Add the imageHolder to the stage
            addChild(imageHolder);
       }
   
       //Add an ENTER_FRAME for the rotation
       addEventListener(Event.ENTER_FRAME, rotateCarousel);
  }
  
  function rotateCarousel(e:Event):void {
   
       //Calculate the angleSpeed according to mouse position
       angleSpeed = (mouseX - vanishingPointX) / 4096;
   
       //Loop through the images
       for (var i:uint = 0; i < imageHolders.length; i++) {
   
            //Assign the imageHolder to a local variable
            var imageHolder:MovieClip = (MovieClip)(imageHolders[i]);
   
            //Update the imageHolder's current angle
            imageHolder.currentAngle += angleSpeed;
   
            //Set a new 3D position for the imageHolder
            imageHolder.xpos3D=radius*Math.cos(imageHolder.currentAngle);
            imageHolder.zpos3D=radius*Math.sin(imageHolder.currentAngle);
   
            //Calculate a scale ratio
            var scaleRatio = focalLength/(focalLength + imageHolder.zpos3D);
   
            //Scale the imageHolder according to the scale ratio
            imageHolder.scaleX=imageHolder.scaleY=scaleRatio;
   
            //Update the imageHolder's coordinates
            imageHolder.x=vanishingPointX+imageHolder.xpos3D*scaleRatio;
            imageHolder.y=vanishingPointY+imageHolder.ypos3D*scaleRatio;
       }
   
       //Call the function that sorts the images so they overlap each others correctly
       sortZ();
  }
   
  //This function sorts the images so they overlap each others correctly
  function sortZ():void {
   
       //Sort the array so that the image which has the highest 
       //z position (= furthest away) is first in the array
       imageHolders.sortOn("zpos3D", Array.NUMERIC | Array.DESCENDING);
   
       //Set new child indexes for the images
       for (var i:uint = 0; i < imageHolders.length; i++) {
            setChildIndex(imageHolders[i], i);
       }
  }
   
  //This function is called when the mouse is over an imageHolder
  function mouseOverImage(e:Event):void {
   
       //Set alpha to 1
       e.target.alpha=1;
  }
   
  //This function is called when the mouse is out of an imageHolder
  function mouseOutImage(e:Event):void {
   
       //Set alpha to 0.3
       e.target.alpha=0.3;
  }
   
  //This function is called when an imageHolder is clicked
  function imageClicked(e:Event):void {
   
       //Navigate to the URL that is in the "linkTo" variable
       navigateToURL(new URLRequest(e.target.linkTo));
  }
  
  
  

  When you load dynamically the content in a bar planning, this content is not a frame to call home in the chronology of the tht unless load you it into an object that is bound to an image.  Then you can try to wrap this code in a movieclip who lives in a specific image.  You may need to adjust the code for this scenario well.  If it works, you can control the location of the carousel by changing the location of the movieclip.

• 31 FX for Mac suddenly stopped loading images does anyone have a solution to this.

  Mid day Fx stopped loading images for buttons, images on Web sites, etc. Can I use other browsers on my Mac and they work fine. I have reset Fx and tried with no Add - installed add-ons. I even deleted and reinstalled. No change.

  You would need to make the change on the subject: config pref permissions.default.image page and set it to 2 to block images by default.

     http://kb.mozillazine.org/permissions.default.image
  

     http://limi.net/checkboxes-that-kill
     bug 851698 - (checkboxes-that-kill) Get rid of options that kill our product
  

• Create Image Carousel of the App World of BB

  Hi, what is the most simple/better approach to achieve an Image carousel as that of the BB World apps proposed carousel?

  Any idea?

  Thank you!!!

  ListView has a horizontal property, however if you want to write your own routine in the onToucvh and the elements to move and resize independently of its best to use containers with animations.

• Image Carousel jumps

  Hello. I used Dreamweaver image carousel in my site, but I have this weird 'jump' to go. I was wondering if there was a way I could get the images do not slip in? I want to just pop up on the screen I think I could line it better in the TV screen that way too. I am very new to this whole web design thing. Thank you for your help. The link to my site's TV & movies

  (I know, the site is a little awkward).

  Your unfortunate use of tables for layout is a huge obstacle to the sensible layout of Bootstrap system.  This is never going to work directly on tablets and mobile devices because it is fixed width in pixels.

  Again and this time divide the tables and MM bearing behaviors.  Honestly, you don't need.   Use CSS layouts and Bootstrap classes.

  If you want a carousel of Bootstrap which uses a fade Transition, see the link below for more details.

  ALT-Web Design & Publishing: customization carousel of the Bootstrap

  Nancy O.

• Can I create a slide show of slider/image carousel with the possibility for the links and the widths of the image to an Adobe program variable and then place in Muse

  Hello

  I really hope someone can help me with a project that led to drive me to despair.

  I'll put up an online art gallery, last year, I used Wix to create a site (explorersglobalfineart.com). Initially, I thought it was a good idea that I could build the mobile site with the site of the office. It turns out that features model are appalling and every time I add a new page I have to reinstall everything on the mobile site.

  In the last month, I've searched Adobe Muse. I started to build the site map and added to the artist page, but there are pages on the current site which have a slider carousel with the possibility for widths of the variable image and links that I cannot emmualte in Muse - http://www.explorersglobalfineart.com/#! Asia/cfvg

  Is there an Adobe program that I can use to create a cursor image carousel with the ability to tie and use images with varying widths which is compatible with Adobe Muse?

  Thank you very much

  Rebecca

  You can try this:

  http://musewidgets.com/products/carousel-Gallery-Widget

  Thank you

  Sanjit

• stop scaling images in the grid layout cs6 fluid

  Hi, ive played with fluid layout grid and I think im picking up pretty well. One thing that confuses me is good with images. If I insert an image and you want to evolve it's good, but if I want to stop the image of everything that I should have scaling to do is to enter a height and width figure, CS6 even performs this task for you in the properties box. This however does not work for me, when I enter the height and width of the image always scales but also bow as well. Ive tried without dimensions, dimensions with padlock power but its does not work.

  http://TV.Adobe.com/watch/learn-Dreamweaver-CS6/using-fluid-grid-layouts/

  This video shows what I want to achieve from 15 minutes to go.

  Please help me

  Concerning

  Well, since you want your images to stay the same size to any width of browser window, you need to ensure that the

  is wide enough when the browser window is reduced, so you must set the to the min-width of the image, instead of percentages:

  {#LayoutDiv1}

  Clear: both;

  float: left;

  left margin: 0;

  min-width: 439px;

  / * Width: 100%; * /

  display: block;

  }

  {#LayoutDiv2}

  Clear: both;

  float: left;

  left margin: 0;

  min-width: 335px;

  / * Width: 100%; * /

  display: block;

  }

• I can't stop my Images to be copied to my Web Pages

  On some sites I visit, it keeps you right click on the image and save it. A message appears saying that impossible to copy the image.

  Anyone of you kind folk knows a way I can stop my images to be saved of my Dreamweaver web pages?

  
  Thank you very much in advance for your help expected!

  Hello

  In addition to John's Tip: proportionally it is a wonderful philosophical discussion: http://webhome.idirect.com/~bowers/copy/copy1.htm

  And by the way, there is the misconception that we can protect our graphics. With little effort, those interested can get to your destination. If you really want to try it, I'll give you here the link to a German site (no problem to adapt the source code) where you can create an alert box:

  http://www.6webmaster.com/homepagetools/klicksperre/do.php
  Rights Maust generator sperren > (der Albertbox-text me EIB Rechtsklick eines Besuchers) > Gewunschter text as Alertbox:

  means something like:
  Generator lock right button mouse > (Albertbox the text appears when right-clicking on a visitor) > suggested the alert message text:

  Hans-Günter

• Image carousel

  Hi guys,.

  Can someone help me create an Image carousel...

  Please Urgent...

  I have attached the capture for the display model...

  Thanks and greetings

  Kamal

  Your image is locked, so we don't know what you intend.  See if what follows is what you're after: http://www.gotoandlearn.com/play?id=32

• 2D to have rounded images affect?

  Hi illustrators.

  I have a handful of 2D images that I would have a rounded affect with.  It will probably also have room a reflection or dyed.  Works of features of Illustrator and for this & provide a quick synposis of use.

  Also, I try to match the colors in this image, but can't find quite the same shades of these color images.

  Here is an example.

  Thank you

  When you say "rounded", I assume you mean cylindrical shade? In your example, it's all just linear graduated fills. See the online help.

  Although very well for the simple graphic style of information in your example, note that this conical object is not at all convincing because graduation does not taper toward the small end of the cone. (Example of why I have argued for years that one of the most necessary aspects of grad fills in basic vector drawing programs would be the one that allows to taper in a fast and easy way.) When the types provided graduates are insufficient (in Illustrator CS3 and earlier versions, they are extraordinarily limited to center-based linear and radial) for the rendered form, generally used mixtures.

  Be aware that paths with fills Grad can be mixed. This often overlooked approach can often produce more 'developed' and more compelling and interesting shading in short order.

  MeshGrads are useful for realistic rendering of less geometrically uniform forms (more random or 'organic'). The compromise is unbearable boredom in a very heavy interface.

  Metallic luster is usually a question of wisely adding more stops and changes of color in the grads (any type). Realism can be strengthened by the development of reflections made in the form of translucent objects or opacity masks. But be aware that once you introduce tansparency, you're requiring pixelation on output.

  Instructions for the use of all of the above features are in the online help. It would be ridiculous to try to write instructions explicitly for a general question, because each case of illustration is different. In addition, it would be just a review of the documentation provided. The overall methodology to convince rendering 2D is:

  1. Learn the basics of using the tools provided in the documentation provided.
  2. Try to explore fully their capabilities, limitations, and issues warnings.
  3. STUDYING the topic you want to draw. Attention to what 'hard' as things reflection, transparency, etc., who are really in the sense of a 2D image. (Current example: people worry endlessly about chrome until they finally come to realize that chrome is little more than a distorted image of the nearbyobject.)
  4. Use what you know now what each tool can do, to create a stack of paths that combine to produce a convincing enough.
  5. Always strive for elegance: the more desired effect with simpler construction. Don't not too complicated in an effort to "force" the effect that you want to display.

  Consider now that the steps above are really the same as those followed in any graphics medium (watercolor, chalk, oil, you-name-it). You explore the behaviors of the medium and work relying on their strong points while avoiding their limitations. Like you, work and practice , you become more competent and your results become more original, more enjoyable and less work. It is too easy and too common to assume in the software development process that there is a wham-bam, instant-gratification 'trick' to all that you might need to draw (or should have). Don't look for it. Looking for features would we apply relatively simple, which can be exploited in an elegant way with the most versatility.

  One other common falacy: continually force you to get out of the mental support everything you put on the page must be a permanent part of the work. Draw temporary paths frequently to help reference and correct geometric construction. Example: If you have some difficulties to see that a particular form of highlighting should look like, 3D effect allows to extrude or revolve a basic form and study the highlights and shadows in the result. Then that imitate the use of mixtures and ordinary 2D graduates.

  JET

• JPEG blurred when playing even after stop on image and rendering

  Hi, I have my encounter a problem with some JPEG images that I need to include in my edition. The original files are of good quality and the right size and what toFCP imported, they look fine and "tidy" in the timeline. As soon as I start to play, they become very blurred. I had done a lot of research online and tried the fix to make a stop on the first frame image and allows to overcome the blur. I have done this and made the effect and the blur is not also bar there is still quite a decline in quality. I am running the latest version of FCP X. Any suggestions greatly appreciated. Thank you.

  Reading quality and rendered its Viewer.

• How to stop the image on my screen sliding upwards

  In Safari, the image on my screen often slides up under the menu bar leaving a single line that can be clicked to restore the image. Although this may seem a minor issue it is intensely irritating and help to stop the problem would be much appreciated.

  I think a screenshot is needed to clarify what you see.

• How to stop multiple images to be sent when sent by e-mail

  original title: when I send pictures, they get them several times.  How can I stop this?

  I have Windows XP.  Whenever I have email photes the inciting person gets them at least twice and I only want what they bring once.   It can be as little as an image or two.  Doesn't make a difference.  How can I stop this so that they only make them once?

  OK... Thanks for the info.

  The following items may not be the solution but
  can be a place to start your troubleshooting.

  Why Outlook Express sending multiple copies of my email?
  http://ask-Leo.com/why_is_outlook_express_sending_multiple_copies_of_my_email.html

  Outlook Express sending multiple Copies of Email
  http://outlookexpressrecoverysoftware.blogspot.com/2009/11/Outlook-Express-sends-multiple-email.html

  Outlook Express sends 2 or 4 or 6 copies of the same e-mail message
  http://msgroups.NET/Microsoft.public.Windows.inetexplorer.ie6_outlookexpress/Outl/142310

  Good luck and if find you the solution, please share it with this forum.

• How can I remove a white space between the top of the navigation bar and image carousel?

  I've created two different versions of a page, with a fixed navigation bar to the top

  Welcome to Warfield Park

  and the other with a default navigation bar.

  Welcome to Warfield Park

  I used images of different heights to compare how they make.

  I don't see how to remove the white band between the default navigation bar and pictures of carousel in the second version.

  I tried out myself, but I don't see what the problem is. I'm sure someone very smart out there tell me!

  Add the following code to your custom dtylesheet

  {.navbar}

  margin-bottom: 0;

  }

• Stop the images to go under the panels?

  I don't know what happened but recently when I snaps a picture it is resized to the size of the entire window of photoshop. The outline of the picture stops on the left toolbar, but on the right it goes under my panels. Another thing that started at the same time is a problem with mini bridge, as you can see it is attached to my group, but when I click on the arrow to decompress it pushes the rest of the Panel to the right and off the screen.

  Also I had problems with the button "adjust the screen. I used to be able to have the window of a certain size and when I hit screen adjustment the window would keep its size, but the image would zoom so there were these areas of shade around the image, now when I did the screen it resizes the window as well. I checked the Zoom option resizes the window is not checked, but nothing works. Help, please! I know that there is an option of enforcement for Mac framework that supposedly corrects these problems, but I'm on a PC (Windows7) so I did not have this option.

  

  If anchor you the panels on the right (layers, etc.) as the Toolbox is anchored to that stop at the image to go under the panels.

  Just enter the upper part of the panels (red box in the screenshot) and move to the right until you see a blue line, then release.

  

  MTSTUNER