Stop several hosts and the virtual machine on the host computers

Similar Questions

• I had the opportunity to see all the drives in windows 7 and XP virtual machine on the same screen. He suddenly disappeared, and I need.

  As I set up my computer with Windows 7 Professional and XP virtual machine, I could see all the readers, W7 and the virtual machine on the same screen. I can't do now for some reason any. All I can understand what is is past is that I got a page long list of automatic updates of W7 and some XP updates and as far as I know, the current page of readers has disappeared since then.  I need this feature if I can transfer files between W7 and XP because some of my programs are in one program of windows. I have nothing special when I installed XP to achieve this functionality, so I really don't understand what it controls.  How can I get that back?

  I have solved my problem by trying everything that moves. Here are my steps:
  -Open Virtual PC and minimize it
  -In the Windows 7 machine, click Start click all programs
  -Select Windows Virtual PC
  -Select Windows Virtual PC (in the drop-down list)
  -When the window opens, right-click on Windows XP Mode
  -Select share >
  -Select the homegroup (read/write)

  -Minimized open Virtual PC
  -Select my computer
  Windows 7 disks will be under other

  I hope this works for you also. As I said, it worked like this until I had a huge list of automatic updates of Windows 7 and XP more some updates. Apparently, one of them cut something.

  Even a blind squirrel finds an Acorn once in a while!

• How to connect 2 physical computers and 2 virtual machines?

  Hello!

  This is my first time in the forum and I would like to ask about the network configuration for an installation of 2 physical machines and 2 virtual machines. Each physical computer has a virtual machine (all operating systems is Windows 7 or 8). I don't have a level of advanced network management, but I would like to ask how to resolve a case of example of this configuration? I was wondering for communication between machines and communication examining between 1 machine with the other 3.

  Thanks in advance! If someone has already asked this, please tell me the reference.

  Welcome to the community,

  VMware Player offers 3 configuration settings, bridged, NAT as well under the name Host-Only network. Host-Only can be used if the virtual machine does not require a connection with the exception of the other virtual machines and the host network. NAT is typically used if the virtual machine requires network access, but didn't need to be accessible to the outside. In your case, the possibility of using is connected by a bridge, which will connect seamlessly the virtual machine to the physical network.

  André

• USB HDD as a data store and storage of VMS and new virtual machines

  I have a server Esxi 4.1 with 1 TB RAID 5 storage and 3 virtual machines. The storage is full and no space for another HARD disk, so my question is: would it be possible to use a USB HDD as a data store and could be included as a storage for new virtual machines or the VM? If so, could someone let me know how to do it because I'm not able to detect the HARD disk on the host itself.

  No, it is not possible to use a USB drive as a data store.

  Linjo

• vRO 7 assign a workflow to change in a plan of action and its virtual machine

  Setting up the environment

  1 vRealize Automation 7.0

  2 vRealize Orchestrator 7.0 that comes with the vRA

  Action plan and configuration of custom workflow

  1 has created a plan of action that the provisions of a Windows Server VM

  • Action plan has already been published
  • Pu VM provisioned to the catalogue of services without any problem

  2. has created a workflow customized to update the properties of the configured virtual computer

  When I try to run the "assign a workflow to change in a plan of action and its virtual machine", I was not able to choose the model that I created at vRA.

  Anyone has the same problem and how we can solve this?

  Thank you!

  vRA 7 no longer uses the entitled it a state change. All happened to event broker now.

  If you want a walk through the check-out this blog post.

  The activation of the event Broker

• Script of PowerCLI to measure the number of host and its virtual machine in each cluster

  Hello

  I'm trying to create a script on regular which gives an output of the host and virtual machine into a cluster of vcenter as below counties.

  Cluster:                                                      VMHost                         VM's

  Cluster01                                                     04                                  15

  cluster02                                                      02                                  35

  Simply using a sample onliner

  Get-VMHost | Select @{N = "Cl"; {E = {Get-Cluster - VMHost $_}} name, @{N = "NumVM"; E={($_ | Get - VM). County}} | Cluster of kind, name

  any ideas? Thanks in advance

  Kind regards

  Subash.

  Try this:

  Get-Cluster | Select Name, @{N="Host Count"; E={($_ | Get-VMHost).Count}},  @{N="VM Count"; E={($_ | Get-VM).Count}}
  

• How to get a list of the DRS rules and their virtual machines.

  If I try the following, I get no output. (PowerShell 2, vCenter & ESXi 5.1, PowerCLI 5.1 Release 1)

  
  ()get-cluster ). ExtensionData.ConfigurationEx.group |? {$_.vm}

  or

  ()get-cluster ). ExtensionData.ConfigurationEx.group

  I know that I have a DRS rule because when I try the following I am able to see it in Object Explorer in PowerGUI and I created it just in the Web Client.

  $Clusters = Get-Cluster

  The problem is that you have DRS groups who do not have vms - possibly accommodate groups of DRS.  If you want only vms something like this should work and does not give the error:

  foreach ($cluster (get-cluster)) {}

  write-host "$($cluster.name)".

  foreach ($drsGroup in $cluster. ExtensionData.ConfigurationEx.group) {}

  write-host "$($drsGroup.name)".

  {foreach ($vm to $drsGroup.vm)}

  If {($vm)

  $vmname = (get-vm-id $vm) .name

  write-host "$vmname".

  }

  }

  }

  ECHO «»

  }

  If you want to get the VMhosts and the VirtualMachines then try this:

  foreach ($cluster (get-cluster)) {}

  write-host "$($cluster.name)".

  foreach ($drsGroup in $cluster. ExtensionData.ConfigurationEx.group) {}

  write-host "$($drsGroup.name)".

  write-host "VMHosts".

  {foreach ($vmhost to $drsGroup.host)}

  If {($vmhost)

  $esx = (get-vmhost-id $vmhost) .name

  write-host "$esx".

  }

  }

  ECHO «»

  write-host "Virtual Machines".

  {foreach ($vm to $drsGroup.vm)}

  If {($vm)

  $vmname = (get-vm-id $vm) .name

  write-host "$vmname".

  }

  }

  ECHO «»

  }

  ECHO «»

  }

• How to add several records of existing virtual machines

  Is it possible to add several drives in one shot to a virtual machine?

  I know it's possible with the new - vm cmdlet, and if I manually modify the virtual machine, I can add as much as I want.

  The cmdlet New-hard drive allows only 1 at a time, I can say.

  Any suggestions?

  You are right, that the cmdlet New - hard drive allows the addition of 1 HDD at the time.

  If you want to add several hard disks, you will need to use the ReconfigVM_Task method.

• Create a new vsphere environment 6 and migrate virtual machines to esxi existing 5.1

  The current environment has a cluster with 5.1 esxi hosts and vcenter server 5.5-controlled.

  I would like to create a new environment vsphere 6 with new hosts. Again I mean a clean install of vCenter server 6 and esxi, implementation of the new cluster, etc.. So I won't be able to migrate virtual machines running in 5.1 esxi hosts to the new environment.

  What would be the appropriate steps to make this right?

  Thank you.

  Take a look at this KB on how to move an ESXi host at another vCenter vSphere: VMware KB: move a managed ESX ESXi host to a vCenter Server to a different Server vCenter

  And if you are using vDS, you should look here: KB VMware: ESX/ESXi host with vDS passing a vCenter Server to another

• How to connect my physical machine and a virtual machine?

  Hi all

  I installed windows 8 in my machine base and RHEL 7 and Windows 7 in VMware worksation.

  I want to connect my basic machine with virtual machines.

  that all changes I need to make in network card?

  should what properties of the network adapter I change?

  More

  In my Vmware workstaiton, I installed windows 7, in that i can't find my network card.

  It shows only a single network adadpter named as bluetooth network adapter...

  Please help me on this :))

  Hello

  For the first photo, it is the configuration of the network card to a virtual computer.

  For the second, it is the type of virtual switch on desktop.

  Adopt a virtual machine can be connected to a virtual switch(NAT/Host-only) of workstation.

  For more details, I found a page for you, it can helps you to better understand the networking of VMware Workstation:

  http://www.virtualizationadmin.com/articles-tutorials/VMware-Server-Workstation-player-articles/Understanding-Virtual-Networking-VMware-Workstation-9.html

  Also aid official docs talk about this part.

  Please, please have a look.

  VMware Workstation 11 Documentation Centre http://pubs.VMware.com/workstation-11/index.jsp?topic=%2Fcom.VMware.ws.using.doc%2FGUID-0CE1AE01-7E79-41BB-9EA8-4F839BE40E1A.html

• An external NIC on ESXi 5.1 and a virtual machine

  Hello!
  I have a dedicated server that has a single network adapter with an IP address from the data center. Installed on the server ESXi 5.1.
  And also the VM deployed, I need to publish on the Internet through the IP address. But because the ESXI host uses this IP address, I don't understand how to do it?
  Best regards, Dmitry

  It does not help if the host is connected directly to the Internet. You cannot have the same IP address on two different systems. The only way to do it with a unique IP address is having something of a NAT device in front of the host that forwards traffic - based ports, for example - to the host's IP address or the IP address of the virtual machine.

  André

• several large files on Virtual Machines

  I checked my drive with OmniDiskSweeper space today and saw that virtual machines takes a huge part of my (about 11 GB) disk space. Windows 7 x64.vmwarevm I find several files named Windows 7 x 64-s, followed by a long number of three digits (s001 s005 and s016). Each of them is 2 GB.

  Are these duplicates? If so, are they safe to delete?

  In my Finder window, it appears as a large file of 12 GB

  Thank you!

  Absolutely not!  Do not delete these files!  Also I strongly suggest that you stay out of the packaging of the Virtual Machine unless you really know what you are doing!   If you want to free up disk space then turn off AutoProtect, if it is turned on and then delete all the snapshots then Clean Up a virtual hard drive.

• Stopping several videos at the same time

  I need to find a way to stop several videos to play at the same time in a classroom or other means.  I use the hero of edge to play videos.  I do not expect people to click on making a break on a video before you go into another section of my site and my site has about 30 videos, so I need to find a way to take a break videos at the same time if something is clicked which redirects to another section, out of the videos page... since I don't know what video mode is reading at the time.  Is there a way within hero edge or edge animate itself, according to what would work better, to stop all videos at once?  I tried to add several classes in a div with orders from edge of heroes; There is no positive result.  It is only to stop the first video mentioned in the class.  Any solution or idea would be useful.  Thank you!

  If you add videos by dragging from the library panel to edge host, then you can Turn off the "Auroplay" for each video.

  But if you add using javasript, you can use the script to do this.

  Add this in the compositionReady event handler,

  $("video").each (function (_, vdo) {}

  VDO.pause ();

  });

  HTH,

  Vivekuma

• Reeboot and restart - virtual machine image

  I use VMWare server 1.0.6 and got one point in the right direction on how to create a virtual machin (xp pro sp2) cancel (restoration) it is the car after it is stopped or restarted. I try to emulat the functioality to an application like Vaccine Drive (turn off or restart the machine and the drive is restored to the State frozen or saved when powerd once again).

  I'm doing it for testing purposes because I need patches to be tested with program installers and I need a State of charge hard drive each test.

  Thank you all!

  CJ

  Well you can take a snapshot and return to it when you need it

  or set up your virtual machine disk to be not persistent not

  concerning

  Jose Ruelas

• VMotion and new Virtual Machine problems

  Hello

  Got a VI2 farm with 3 ESX servers.

  1 of the ESX servers play big time... when I try to VMotion VM him another 2 or create a new virtual machine, it gives the same error message ' reason: could not start the operation of long duration for the server VM.» Reason: Failed to get the directory config (basename = servername"

  Can I migrate from the problem for the other 2 ESX Server but not for her. Cold cant migrate either.

  I checked the logs, rebooted and rebooted vCenter Agent. Still no luck.

  Any help appriciated!

  This thread help me?

  Check this one, too.

  Basically, it seems that the system has trouble finding / access to one or more of the files associated with the virtual machine. Given that you can migrate to and not the host, I suspect it's the permissions problem reported in the first thread.

  Ken Cline

  VMware vExpert 2009

  VMware communities user moderator

  Blogs about: http://KensVirtualReality.wordpress.com/