Stop the random system, blue screen.
Hi, my computer is windows 7 64 bit. for the past few months, my computer has been stop randomly, for example, while playing games, often it works fine. However, many times my computer just freezes and produces a continuous noise of stuttering. When I try to reset, sometimes it restarts successfully, and sometimes it isn't. my computer is an Acer Predator G5910. When I try to reset, it would not produce beep sounds and the little blue light does not appear. I wanted to wait a while later to restart. the computer freezes often also when I don't do anything. for example, if I went to the bathroom and to the left of the screen nothing running home computer, it would freeze again and I have to reset. Blue screens recently have popped up but disappear too fast for me see whats on it. and sometimes, my computer works perfectly well. I have no idea what still recently, we used our warranty and they said they changed everything inside the computer. It is one of the technical information, I received in the blue screens: 0x0000001E (0xFFFFFFFFC0000005, 0x0000000012DA0D60, 0xFFFFF8800F2D68C8, 0 x 0000000000000000)
Hello
We have three audits of bug:
LEAPC_INDEX_MISMATCHERREUR (1)
This indicates that there is an inconsistency in the index of State APC.
This is an internal error in the kernel. This error occurs at the output of a system call. One possible cause of this bug check is when a system file or driver has a sequence do not call system to enter or leave the regions controlled or critical.
-It is usually hardware related bug control.
System_service_exception (3B)
This indicates that an exception happened during execution of a routine that passes from non-preferred to the privileged code code.
This error has been linked to the excessive use of expanded memory and resulting from user mode graphics drivers enjambment and passing data incorrect of the kernel code.
Nom_image: material
MODULE_NAME: material
0: kd > fffff880018c7548 ln
(fffff880'018 c 7530) ndis! ndisOidSendToMiniportDirect + 0 x 18 | (fffff880'018 c 7620) ndis! ndisFQueueRequestOnNext
^^ It seems that the exception occurred in ndis! ndisOidSendToMiniportDirect + 0 x 18.
PAGE_FAULT_IN_NONPAGED_AREA (50)
This indicates that invalid system memory was referenced.
Bug control 0 x 50 usually occurs after the installation of a faulty hardware or installation failure of material (usually associated with defective RAM, either main memory, L2 RAM or RAM video cache).
Another common cause is a defective system service installation.
Antivirus software can also trigger this error, as can a corrupted NTFS volume.
-----------------
1 Intel Extreme Tuning Utility - Office control - uninstall as soon as possible.
2 make sure you have the latest video card drivers. If you are already on the latest graphics card drivers, uninstall and install a version or a few versions behind the last to make sure this isn't a last number one driver. If you have already experienced with the driver of the card later and earlier versions, please try the driver beta for your card.
3. If you're still crashing after what above, run Memtest for NOT LESS than 8 ~ (several hours):
Memtest86 +:
Download Memtest86 + here:
Which should I download?
You can either download the ISO pre-built you want to burn to a CD and then boot from the CD, or you can download the automatic installer of the USB. What this will do is format your USB drive, make a boot device and then install the necessary files. Both do the same job, it's just you that you choose, or you have available (be it CD or USB).
How Memtest works:
Memtest86 writes a series of test patterns for most of the addresses of memory, reads the written data and compares it to find errors.
The default pass is 9 different tests, varying in the modes of access and test data. A tenth test, bland, is selectable in the menu. He wrote all the memory with zeros, then sleeps 90 minutes before checking to see if the bits have changed (perhaps because of refresh problems). This is repeated with all those for a total time of 3 hours by pass.
Many chipsets can report RAM speed and timings by SPD (Serial Presence Detect) or EPP (Enhanced Performance Profiles), and some even support changing the expected memory speed. If the expected memory speed is overclockee, Memtest86 can test that memory is free of error with these faster settings.
Some hardware is able to report the status of the "PAT" (PAT: active or PAT: disabled). This is a reference to the Intel performance acceleration technology; There may be the BIOS settings that affect this aspect of memory synchronization.
This information, if it is available for the program, can be displayed via a menu option.
Other questions, they can most likely be answered by reading this excellent guide here:
http://Forum.canardpc.com/threads/28864-FAQ-please-read-before-posting
Kind regards
Patrick
Tags: Windows
Similar Questions
-
RESTART THE COMPUTER AFTER BLUE SCREEN
I use windows 7 64 bit peacefully at the moment sometimes until a few weeks before. My computer reboots intermittently then it display message windows recovery shows the details of the error. Signature of the problem:
Problem event name: BlueScreen
The system version: 6.1.7600.2.0.0.256.1
Locale ID: 1033More information about the problem:
BCCode: 3B
BCP1: 00000000C 0000005
BCP2: FFFFF9600010E309
BCP3: FFFFF88007522060
BCP4: 0000000000000000
OS version: 6_1_7600
Service Pack: 0_0
Product: 256_1Above are the details of the error. Please help me.
I've also posted the dump file on my skydrive. This is the link http://cid-6bce03f6d07a7c2a.skydrive.live.com/self.aspx/blue%20screen
Hello
Generally, this error is caused by video drivers so use the methods in the driver section below to
update your drivers manually. Using device update management drivers one or even a scanner
on the site of the manufacturer of the device will not get the job done correctly. Other possible influences are antivirus.
programs of antispyware/security including firewall part 3 - which ones do you use and which
already have on the computer?Also update the BIOS if available.
If necessary the BlueScreenViewer allows you to validate the information in a message here that will allow
all this to see the info without having to download it and for them to download. Its a small and very
easy to use utility which is free.BCCode: 3B 0x0000003b
Cause
This error has been linked to the excessive use of expanded memory and can occur due to user mode
graphics drivers enjambment and pass incorrect data of the kernel code.BCCode: 3B 0x0000003b
http://www.faultwire.com/solutions-fatal_error/system-service-exception-0x0000003B-* 1074.html=============================================
If you need to do more troubleshooting.
Look in the Event Viewer to see if something is reported on those.
http://www.computerperformance.co.UK/Vista/vista_event_viewer.htmMyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
http://www.NirSoft.NET/utils/my_event_viewer.htmlIt is an excellent tool for displaying the blue screen error information
BlueScreenView scans all your minidump files created during 'blue screen of death '.
hangs and displays information about all accidents of a table - free
http://www.NirSoft.NET/utils/blue_screen_view.htmlThe output of BlueScreenView can be seen and recorded in several formats such as:
(The default display in the program itself is excellent and can be changed in many
views, including the page of blue screen of XP style as necessary)Dump file: 031210-27892 - 01.dmp
Crash time: 2010-03-17 08:52:05
Bug Check String: SYSTEM_SERVICE_EXCEPTION
Bug check code: 0x0000003b
Parameter 1: 00000000' c0000005
Parameter 2: fffff960'0010e309
Parameter 3: fffff880'07522060
Parameter 4: 00000000'00000000
Caused by the driver: win32k.sys
Caused by the address: win32k.sys + ce309
Description of the file: multi-user Win32 Driver
Product name: Microsoft® Windows® Operating System
Company: Microsoft Corporation
File version: 6.0.6000.16386 (vista_rtm.061101 - 2205)
CPU: x 64
Computer name:
Full path: C:\Windows\minidump\031210-27892-01.dmp
Number of processors: 4
Main version: 15
Minor Version: 7600and:
031210-27892 - 01.dmp 17/03/2010-08:52:05 SYSTEM_SERVICE_EXCEPTION 0x0000003b
00000000' c0000005 fffff960'0010e309 fffff880'07522060 00000000 00000000' win32k.sys
Win32k.sys + ce309 Multi-User Win32 Driver Microsoft® Windows® operating system from Microsoft
Company 6.0.6000.16386 (vista_rtm.061101 - 2205) x 64
C:\Windows\minidump\031210-27892-01.dmp 4 15 7600============================
It's my generic how updates of appropriate driver: (mainly updated BIOS and video well)
others would not hurt because you are using a new OS)This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlIf you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
Updates, that leaves about Windows updates but it will not install the drivers that will be generally
older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
get new manually if you wish.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspxHope these helps.
Rob - bicycle - Mark Twain said it is good.
-
name of the event problem - blue screen
problem Signature;
Name of the event problem - blue screen
Version de l’OS-6.0.6002.0.0.0.768.3
Local ID - 1033Additional information:
Collection 116 BC
BCP1 87601008
8C208D80 BCP2
BCP3 00000000
BCP4 000000026_0_6002 OS version
ServicePack 2_0
Product 768_1Files that describe the problem
C:\Windows\Minidump\Mini022810-01.dump
C:\Users\User\AppData\Local\Temp\WER-167170-0.SysData.XML
C:\\Users\User\AppData\Local\Temp\WER8FA1.tmp.version.txtHow can I fix it
Hello
It's my generic how updates of appropriate driver: (update your video/display driver).
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded on your
System. For each driver in the list, additional useful information is displayed: load address
of the driver, description, version, product name, company that created the driver, and
more.
http://www.NirSoft.NET/utils/DriverView.htmlTo check system drivers manufacturer as replacements and camera manufacturer who are most
current. Control Panel - device - Display Adapter Manager - note the brand and
fill out the template tab of the driver for your card video - double-click - write down the
the version information. Now click on UPdate Driver (this can do nothing as MS is far behind
certification of drivers) - then do a right click - Uninstall - REBOOT it will refresh the driver
stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd
evening with their own software and drivers and all other main drivers you have.Now, go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration), and then
Site of the manufacturer of the device (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions.
(Review of the BIOS, Chipset and software updates on the site of the manufacturer of the system while there).Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT
After each installation.Always check in the Device Manager - drivers tab to be sure the version you install
actually arises. This is because some restore drivers before the most recent is installed
(particularly that audio drivers) so install a driver - reboot - check is to be sure
installed and repeat if necessary.Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlIf you update the drivers manually, then it's a good idea to disable driver facilities in
Windows updates, that leaves about Windows updates but it won't install drivers
who will be generally older and cause problems. If updates offers a new driver can
HIDE (right click on it) and then go get new ones manually if you wish.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspxHope these helps.
Rob - bicycle - Mark Twain said it is good.
-
Get the random stop downs and error blue screen
Original title: need help with 2 problems
OS: Windows vista Home premium 64-bit
Laptop HP dv 9000
#1: random stops or blue screens, screens of plaid, split screens, etc. after its judgment, requires the restore to the restore point
#2 error 10 w /! (yellow) verified "WPD files impossible to install system volume driver" starts pilot; driver update (says it is updated)
technologically challenged both need very specific assistance/instruction; Thank you
Hello
Did you change your computer?
I suggest you to follow the steps from the links and check out.
Method 1:
How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
http://support.Microsoft.com/kb/958233
Method 2:
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.
Updated a hardware driver that is not working properly
-
I guess that the title line roughly amounts to the top of my problem. The disruptive cases started after installation of SP2 and at this point, I want to go back to SP1, how can I do this?
Hi Orman,
Thanks for posting on Microsoft answers Community Forums.
To fix the error on a blue screen on your computer, you can access the link below and follow the steps:
http://support.Microsoft.com/kb/958233In case you are unable to solve the problem and still want to uninstall Vista SP2, access the link below and follow the steps:
http://support.Microsoft.com/kb/948537It will be useful.
Kind regards
Srinivas
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
32-Bit XP system - attempt to reinstall the start of the disc, guard blue screening.
Hi guys, I'm sorry if it was taken up elsewhere, I took a look through other threads prior to this announcement, but were not of those who looked more closely. Basically, I'm trying to reinstall my operating system from the top of my current installation, saving my files. I did it before the start of the disc, but this time my XP disc does not work properly. I tried at least 20 times, I kid you not, but if it is not a blue screen at random times all while it loads the disc components, it screens in windows ALWAYS blue step load. I wonder, if not, how I can reinstall XP, without having to buy a new drive, is there some way I can do this?
I posted this on other internet support forums, and it just happened to ask me HERE!
I really hope that someone can help me, I'm trying to start the study soon and my PC is really important to me, but there is NO way I could afford a whole new operating system... so I REALLY hope that it does not come to that...Cheers, Jay
Hello
1. What is the exact error message you are getting?
2. are you able to boot to the desktop?
3. don't you make changes to the computer before the show?
Please unplug all devices (except the keyboard, mouse and monitor) external connected to the computer and then try to install Windows XP.
Provide us with the exact stop blue screen error code in order to help you better.
-
Original title: in my desktop screen. the BSOD appeared...
Hello everyone,
While to my desktop screen (don't remember if I was doing anything however), the BSOD appears, indicating the system stopped to avoid any damage occurs.
The following was then shown (exactly as you see):
STOP: Ox0000000c5 (Ox00000002, Ox00000001, Ox00000004, Ox805515A1)
Then a memory dump has been launched.
The only way to get rid of the blue screen was to unplug the computer from the power source, then turn it back on. After reboot, "error reporting box" appears asking if I wanted to report this error to Microsoft I did), then closed the box. Almost immediately after, the computer I connected to the Internet to a site that says "Microsoft error report" in the upper left corner of the screen.
Then, there was some additional information about the page displayed on some system functions in my computer does not. I was directed to click on a link to the so-called "Roxio...? & then asked to download, "Pxengine 4_18_16A.exe. (Provided by Sonic Solutions, version 1.13.37.0, created on 20/07/2009).
This is now a 5th time a blue screen appeared during 5 days. This time, the only difference is in the codes and being redirected to the page described above to download something I've never heard of and have no idea of what it is supposed to do.
I would appreciate any information that someone has just what it is. I'm simply puzzled.
Thank you very much in advance!
Hello
1. don't you make changes on the computer before this problem?
2 do you have software Roxio installed on the computer? If so, then Uninstall the software and check.
You can also check if the problem persists in the clean boot state.
-
STOP 0 x 00000050 blue screen after installing the Windows security update [Vista]
As the title suggests, after installing an update of security on Vista, I got a blue screen on reboot. Error code 0 x 00000050. I see the suggestions of some places on the internet saying that I have to go in safe mode, but even when I try this I get the error.
Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
Z240 HP SFF: HP SFF Z240 random crashes, blue screens and crashes
Hello
My work machine is a Mini PC Z240 from HP. Last month, the machine began to hang randomly and display blue screen errors. There is not much in the way perceptible models, but it tends to happen when the machine is in use, rather than the idling, and I can reproduce it systematically using the constraint of Prime95 test utility. When I put it to maximize the heat of CPU, as soon as I stop the test, the screens of the blue machine, which indicates a cooling issue.
Fan of the machine is very quiet, although occasionally he becomes very strong after a reboot and then quieted down.
I think the fan to get a louder as the CPU gets hotter during the stress test, but this does not happen, so I wonder if the fan is defective, and if it is a known problem with these machines, or if there is no possible resolution.
Please see below for the output of BlueScreeView, which displays error codes produced by these last blue screen errors.
Hi @ericchubb,
You try to update the BIOS on the unit, here is the link to download, choose the operating system and download the required file.
If the problem persists, I suggest you to contact Hp support and make a request.
Worldwide contact HP:
http://WWW8.HP.com/us/en/contact-HP/WW-contact-us.html
I hope that answers your question.
I am an employee of HP, the views expressed here are my personal opinions, not HP.
Make it easier for others to find solutions, marking my answer "Accept as Solution" if it solves your problem.
Click the "Thumbs up" button to the left side of my post to recognize the message *.
-
X 200 random problem blue screen
I bought X 200 about two months ago, but after the first two weeks, he began to encounter ramdomly blue screen. Everything I did, even when I leave it open, blue screen also occurs. Today I went to Lenovo Think Center to check it out, but after having verified the dump files, they said it is a software problem casue by NETw5v32.sys and ntoskrnl.exe and suggest me to retrieve the entire system. I know a friend of mine has exactly the same problem with me, he picked up his system several times and always met blue screen. It seeems that this solution will not work. Now I wonder what happens to my X 200... Yesterday I use system upadate all my drivers, including Wifi and the BIOS. But today, I met another blue screen... What should I do now?
One of the blue screen message:
Product
WindowsProblem
Stop unexpectedlyDate
5/11/2008 15:03Status
Not reportedSignature of the problem
Problem event name: BlueScreen
The system version: 6.0.6001.2.1.0.768.3
Locale ID: 2052Files helping to describe the problem (some files may be is no longer available)
Mini110508 - 01.dmp
SysData. XML
Version.txtAdditional information about the problem
BCCode: d1
BCP1: 00003D 60
BCP2: 000000FF
BCP3: 00000000
BCP4: 00003CE0
OS version: 6_0_6001
Service Pack: 1_0
Product: 768_1Basic information of my X 200: P8400, 3 G of RAM, 2 G memory, 160 G HDD turbo...
Thank you ~.
following my last post.
I have replaced mainboard (x 200), the problem is gone now... H/W recommended tests it was ok... This laptop was also randomly freeze and restart itself, as well as BSOD...
I hope this helps.
-
STOP: 0 x 00000050 blue screen/not turning on
Hello
Yesterday I updated my computer with 4 or 5 updates automatic and little time after the screen flashed blue then the computer restarted before I could see what he says. It restarts successfully but later same updates came back to the top and it's the same thing. Today, my computer was not able to turn it on.
A black screen appears with the start modes, but none works. I was able to open some forms of parameter with the function keys and managed to do stop at the blue screen and it says:
STOP: 0 x 00000050 (0xF321B2C8, 0 x 0, 00000000 00000001, 0xBF88784B) downstairs
Hi master bri.
If you are able to start your computer in safe mode, and thenrestore the computer and check the result.
Once you have started the computer successfully, install the update that is mentioned in the following article.
See You receive an error message "Stop 0 x 00000050 ' when you restart a Windows XP-based computerIf nothing works, then repair install XP. Try these steps to repair install Windows XP:
a. start the computer using the XP CD. You may need to change the boot order in the BIOS OF THE system for the CD starts before the hard drive.
b. on the "Welcome" screen, press ENTER to start the installation of Windows.
c. accept the license agreement and Windows will search for existing installations of Windows.
d. Select the XP installation you want to repair in the list, press R to start the repair.
e. the installation program copies the necessary files to the hard disk and restart. Do not press any key to boot from CD when the message appears. Setup will continue as if it were a clean install, but your applications and settings are preserved.
f. when the installation is complete, check if Windows starts correctly.Visit our Microsoft answers feedback Forum and let us know what you think.
-
Original title: RQL_NOT_LESS_OR_EQUAL blue screen
Windows Vista Home Pemium
System
Hewlett-Packyard
Model:-s3580a
RAM memory (RAM) 2.00 GB
Type of system: - 32 bit - OSI get a blue screen with this message. Sometimes it's memory something...
Win32k.sys - address 972FC9CF base at 9726000, DateStamp 4f79ab49 STOP: 0x0000008E (0 x 0000005, 0x972FC9cCF, 0xA72AACAB, 0x00000000
I had a power surge and I couldn't use the computer. When she did finally after 4 months, he would sometimes load. Now in the past 2 months, the computer has been great. A bit slow sometimes. Now, I get this message. How can I fix?
Neva mind, I got the number fixed... with a new hard drive... lol. My other drive hard :*(broken
-
LifeCam is at the origin of the problems of "Blue screen" when you try to close?
I get a blue screen when you try to stop, we have identified the "Lifecam can be the cause of the problem?
Hello
Thanks for posting your query in the Microsoft Community Forums.
According to the description of the problem, I understand that you get Blue Screen of Death, when you use Lifecam on Windows 7 computer.
We're here to help and guide you in the right direction.
I suggest you to consult the help article and check if it helps.
Method 1
I suggest you update drivers lifecam and check if this may help,
Updated a hardware driver that is not working properly
Update drivers: recommended links
Method 2
Visit the link mentioned for more information below.
Resolve stop (blue screen) error in Windows 7
Note: System Restore does not affect personal files, such as e-mail, documents, or photos, so it cannot help you restore a deleted file. If you have backups of your files, you can restore files from a backup.
Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost
Note: Reinstall Windows 7 will remove all the programs you have installed and restore the default settings of Windows. You will need to restore your user files, and reinstall all the programs you've installed using the installation disk or the original files.
It will be useful.
Let us know if you encounter problems under Windows in the future. We will be happy to help you.
-
Satellite M70-337: random black/blue screen out of nowhere
Hello
I have random problems with a black or blue screen appearing suddenly with way now out of it, but to restart. I have no idea why, and that's a problem because I use a dj program and cannot be crashing on me during a concert...
Any ideas why this might be happening?
I hope a quick response because I have a concert Saturday and is not what is happening!
Thanks in advance!
Here in the forum is not easy to understand what you mean with a black or blue screen. Unfortunately, nobody has posted before and it will be interesting to know what you have done to solve this problem.
-
Qosmio F60 - stop slower and a blue screen with driver out of State
Hello
I've only had the F60 for a few weeks and although it worked well for 2 weeks, 2 days has been a disaster. First AutoCAD crashes during startup and does not at all.
So, my Outlook 2007 do not meet 1 / 3 times.
Finally, whenever I stop, this is a very slow stop (10-20 minutes) and then blue screens, restarts and says that it is a driver fault status.Help - what someone else had these problems?
You'll be lucky if someone else uses the same software as you and you can check this.
My personal opinion is that all of the problems described are certainly software related issues.We do not know how you set up your laptop, what modules are preinstalled, software that runs in the background and all other important info is not easy to discuss these issues.
I'm sure that you do not have these problems on the first day, right?
I know you hate me now, but maybe you should back up all your important data and install the OS to help original Toshiba recovery image. After having this software to remove all the preinstalled you do not need (additional Toshiba stuff) and continue with the installation of Microsoft Office. Check the functionality and continue to install your favorite step by step software and watch carefully what happens.
Also disable automatic Windows Update and change this option to check for updates but let me choose... option. So, you will have full control over updates.
Maybe you are looking for
-
How can I get thunderbird to delete messages from the server
When Thunderbird gets mail from the server, I want that he deleted from the server. How can I do this?
-
Why new messages go to Archive: Inbox instead of the Inbox?
All new messages go into the Archive: Inbox instead of the regular Inbox. If I rename Archive.SBD into Archive.tmp, then go to new messages in the regular Inbox, but I lose my Archives.
-
Best SSD for end 2011 MBP?
As the title suggests, I'll be in the market to improve the speed of my MBP late 2011. I upgraded the RAM 16 GB, and it made a wonderful difference. I record music on my computer, and I'd appreciate a reliable car with good read/write speeds. I looke
-
Can not view videos and pictures after downloading the camera
recently, I downloaded my photos from the camera and vidioes to my Office I can see my pictures, but I can't watch my vidioes what I can do to fix this used
-
Working after installation of Yosemite my MP Navigator software never worked properly. The app would launch and interact with the MP530 but buttons fastening for email, save, etc. were ghosts buttons. So I deleted the app and tried to find it to re