Stop the server

Similar Questions

• Since Sunday, I can't download the adobe reader software. Stop the server. Answers?

  Since Sunday, I can't download the adobe reader software. Stop the server. Answers?

  Adobe Acrobat Reader DC Instalacao para todas as paid

  ""ERR_CONNECTION_TIMED_OUT " "

  At the end.

  The problem was the internet provider.

  Thank you.

• CF8 dev edition - how to start / stop the server?

  Mac osx - CF8 dev edition - how to start / stop the server?
  
  I would turn off auto CF8 start at startup and I can manually start and stop the server...
  
  Q: How do I configure this?

  > Now, I'm also interested to extinguish CF8.01 "auto start on startup.
  > (currently set to that now)
  >
  > Q: How can I turn off that autostart?
  >
  > Hi folks - I'm always interested in the CF on MAC OS x 10.5 server configuration to
  > * NOT * Auto Start - how can I turn off that autostart?

  I googled "cf8 osx doesn't autostart" and turned to the top this:
  http://www.Feed-Squirrel.com/index.cfm?evt=viewItem&ID=96307

  Who is? That's all a little Greek to me because I have not used a
  Mac for...

  Crikey...

  TWENTY YEARS.

  --
  Adam
  (suddenly feel old enough)

• Stop the 'Server not found' messages where ads used to be.

  Installed Hostsman and get now 'server not found' and other details where all the ads used to be on the web pages.
  A way to stop the messages?
  Thank you

  You can check on the support site Hostsman.

• What happens if you stop the server vCenter labmanager?

  In vmware, if we stop the virtual center server, nothing happens for running virtual machines. Yes, the console is not available and many features are no longer works, but nothing will happen for the virtual machines running on ESX hosts.

  Something similar will happen if you stop the Lab Manager server, or each virtual machine will be cancelled and so on?

  Concerning

  Marius Aulie

  Transit operations will be in an inconsistent state - tell to start you a deployment or a clone and the LM server it comes while watching the busy spinning thingy.  The operation may or may not have actually failed, but it depends if vc has obtained the call full or not before, but the Director of the laboratory, to be restarted, only knows an operation was launched but did not recognition that he finished, will make the assumption that something bad has happened and mark incompatible or failed.

  VM in operation remain in operation.  They may briefly appear to be in an inconsistent state, but it lightens.  You cannot open a session in the laboratory Manager, of course, so no access to consoles, but RDP works very well.  DRS, if you, can decide to move a virtual machine and LM aura it's work that he's trying to find him, but the virtual machine itself will be sane.

• bootstrap failure error when stopping the server

  I deploy VIO on Cluster Management (3 knots). After stopping 15 virtual MACHINE - VMware OpenStack integrated VIO (electric failed).

  Again these machine VIO, but an error occurs. The error display 'bootstrap failed.  Anyone got this?  Please tell me what to do, what service would start?

  Thanks and respect for the best!

  for this situation. Please, try the following.

  1 > power on all 15 virtual machines

  2 > login in the three database node

  Run the command "sudo mysqld_safe - wsrep-recover" on each of the nodes of the database.

  the output should contain a string of characters as "" Recovered position aec1365-4567-21e4-e3d3 - 871472caa7b3:56728 ".

  Write down the number after the ': '.

  Choose the node database with the largest number and issue the command to follow up on it.

  sudo service mysql start - wsrep-new-cluster

  then run

  sudo service start mysql

  on the other node two database.

  3 > connect to the administration server

  Run > vioconfig start

  This should bring your openstack.

• Start/stop the server Oracle On Demand

  Hello
  
  I installed Oracle 9i R2 on my laptop (WinXP SP3) for certain events. When the project is completed, I want to keep the Oracle server on the laptop but disable to reduce consumption of resources. When I need Oracle server, I will start/stop it on request.
  
  Is it possible to do that, if yes, can you please tell me the procedure to do?
  
  Thank you very much in advance.

  Like Yingkuan said, changing (at least) the database services and the listener to the manual (instead of the default automatic value).

  Then create a small batch with the Net Start command to start these services. (and another to stop).

  net start "OracleOraDb11g_home1TNSListener".
  net start "OracleServiceORCL".

  net stop "OracleServiceORCL".
  net stop "OracleOraDb11g_home1TNSListener".

  (the name of your database can be more ORCL)

  Then, you can double-click to start and stop Oracle as often as you want.

• WLST script to stop the managed server takes 30 mins

  Hello

  I have a setup where I use Node Manager and WLST to stop a managed server. The script is simply:

  nmConnect('weblogic;,'password','123.456.78.9','5556','soa_domain','/u01/soa_domain','plain')

  Connect('weblogic','password','t3://123.2456.78.9:8001')

  Shutdown ('soa_ms1', 'Server', 'true ', 3000,' force = true')

  Exit()

  It takes usually more than 30 minutes for the server managed to stop using this method. However, if I use the console and select the managed server and select to FORCE SHUTDOWN NOW, the action is completed in less than 2 minutes.

  Why is there such a difference in time?

  Thank you very much

  Andy

  Hello

  Have you tried running the command shutdown() WLST directly and not the script created... ? If so the results were the same... ?

  In addition, in your script, I think it would be advisable to print the output for each line text using the command 'Print', just to see where exactly it takes all this time...

  [EDIT: now I noticed in the shutdown command, you use a timeout of 3000 seconds value, which, according to the wlst command Manual is "Duration (in seconds) during which WLST waiting for subsystems to complete ongoing work and to hang before you stop the server".] Try to reduce this value to, say, 30. If the shutdown command would look like this:

  Shutdown ('soa_ms1', 'Server', 'true ', 30,' force = true')

  Or, you can completely remove > shutdown('soa_ms1','Server','true','force=true')

  [/ END EDIT]

  Kind regards

  White

• Safe to stop VCenter Server Services on device?

  I need to make a manual backup of the POSTGRES BD because of stale licenses problem.

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 2054008

  To do this, I need to make a manual backup of the DB before making changes, which requires that I have stop the Server of VMware Services on the device. What are the potential problems with stopping these services?

  
  

  
  

  
  

  Hello

  totally safe to restart services vcenter (process vxpd).

  Just the users connected to the vcenter sessions will be abandoned.

  Take a look at this:

  VMware KB: Stop, start or restart of vCenter Server Appliance services

  Best regards

  Pablo

• Could not start the server after a rowloader is attached to a table

  I'm under SQLFire 1.1.1 on Windows 7.  I use the example of JDBCRowLoader as well as the JDBC Microsoft SQL Server (sqljdbc4.jar) driver to connect to SQL Server 2008

  My process flow is:

  (1) start the locator - locator sqlf - peer-discovery-address = localhost - dir = locator1

  (2) start the server - server sqlf start - locators = localhost [10334] - bind-address = localhost-client-port = 1528 - dir = server1-classpath=C:\vFabric_SQLFire_111_b42624\lib\rowloader.jar; C:\vFabric_SQLFire_111_b42624\lib\sqljdbc4.jar

  (3) create a table-

  CREATE TABLE station

  (id int,

  title VARCHAR (500), primary key (id));

  (4) attach the table to the rowloader-

  call the SYS. () ATTACH_LOADER

  "APP."

  'post',

  "JDBCRowLoader,"

  ' | URL = jdbc:sqlserver://localhost;databaseName=DEVELOPMENT;user=rowloader;password=rowL0ader. query string = SELECT id, title FROM mission WHERE id =?') ;

  Presents all works.  I can select in the message table in the cache.  And if the id is not in the cache, it is filled with SQL Server.

  This set works fine until I have to stop and start the server.  Then, the next:

  (5) to stop the server - server stop sqlf - dir = server1

  6) Server - server sqlf start - locators = localhost [10334] - bind-address = localhost-client-port = 1528 - dir = server1-classpath=C:\vFabric_SQLFire_111_b42624\lib\rowloader.jar; C:\vFabric_SQLFire_111_b42624\lib\sqljdbc4.jar

  And here it hangs.  And it crashes only if I had already joined the rowloader to the table.  The logs show no problem.  Looks like it stops:

  [info 25/10/2013 13:42:33.103 CDT SQLF:TraceConglom < CacheServerLauncher #serverConnector > tid = 0xc] With the help of the JAVA virtual machine as a data store of SQLFire for the table [APP. POST] with table-partitioned by default = false

  [info 25/10/2013 13:42:33.128 CDT SQLF:TraceConglom < CacheServerLauncher #serverConnector > tid = 0xc] GemFireTransaction TX 2: created a conglomerate with 76 id: [table: APP.] [POST id: container (0, 76), isApplicationTable = true]

  [info 25/10/2013 13:42:33.141 CDT SQLF:TraceConglom < CacheServerLauncher #serverConnector > tid = 0xc] Created the index with a descriptor: ConglomerateDescriptor: conglomerateNumber = name 77 = uuid = heap = com.vmware.sqlfire.internal.engine.access.index.Hash1Index 6a6b410a-0141-f0ec-11cf-000000674058 2__POST__ID: (0, 77) container on the base container: [table: APP.] [POST id: container (0, 76), isApplicationTable = true] caseSensitive = indexable true = true

  [info 25/10/2013 13:42:33.145 CDT SQLF:TraceConglom < CacheServerLauncher #serverConnector > tid = 0xc] Created table 'APP '. "" POST "by UUID: 42adc10b-0141-f0ec-11cf-000000674058

  [info 25/10/2013 13:42:33.146 CDT < CacheServerLauncher #serverConnector > tid = 0xc] FabricDatabase: re-read correctly entry with sequenceId = 1

  [info 25/10/2013 13:42:33.146 CDT < CacheServerLauncher #serverConnector > tid = 0xc] FabricDatabase: from initial proofreading for entry: {QueueValue: key = 2, value=SqlfSetLoaderMessage@1c736ea (processorId = 0; processorType = 77; posDup = false; replayKey = 2; scheme = APP; table = POST implementation = JDBCRowLoader; initInfoStr = | url = jdbc:sqlserver://localhost;databaseName=DEVELOPMENT;user=rowloader;password=rowL0ader! | query string = SELECT id, title FROM mission WHERE id =?)} {[sequence: 2]}

  [info 25/10/2013 13:42:33.148 CDT < CacheServerLauncher #serverConnector > tid = 0xc] SqlfSetLoaderMessage: Execution with areas such as: SqlfSetLoaderMessage@1c736ea (processorId = 0; processorType = 77; posDup = false; replayKey = 2; scheme = APP; table = POST implementation = JDBCRowLoader; initInfoStr = | url = jdbc:sqlserver://localhost;databaseName=DEVELOPMENT;user=rowloader;password=rowL0ader! | query string = SELECT id, title FROM mission WHERE id =?)

  And then nothing else.  And the server never ends to start.  Only, it of there and does nothing.  And it happens every time if I have the charger line attached.  And it starts fine when the charger of the line has not been set previously.

  Any ideas or suggestions?

  I can provide the patch referring to Eric. Please email me at [email protected] and include your name, the name of your company as well as to the where you are using the SQLFire product (ie. assessment of POC, customer, potential customer). I will then provide you with a download site where you can remove the 1.1.1.2 fix.

• Starting the server takes a long time due to the storage of JMS persistence files

  Hello
  
  We use WebLogic 9.2 on a windows machine.
  Recently, we have improved our request to work with JMS.
  We are on 2 different servers in a cluster using 2 JMS servers and works with distributed destinations.
  We use file storage as our persistence store.
  
  Recently, we found boot server takes a long time because of the actions that are performed on the storage of files.
  Analysis of this problem, we have seen that the size of the file is of ~ 2 GB.
  We understand that the file size does not fear (unless it is compacted manually), and its size matches the largest number ever of pending messages in the queues (as a mark of high tide).
  We shot also store debugging, using weblogic. Debug.DebugStoreIOPhysical and we saw a lot of recovery after newspapers file storage is open.
  We have checked and checked our JMS transactions are completed successfully. We also checked that the current messages and number of courses is 0.
  We stopped the server gracefully, check that there are no messages pending.
  However, several times takes start server ~ 30 minutes due to heavy work on the persistence store.
  Compaction or remove storage of files eliminates the delay.
  However, we want to avoid the manual operations whenever we want to start the server.
  
  Please share your ideas.
  
  Thank you
  Itsik

  The only suggestions I have off the top of my head are:

  * Ensure (1) the host system has at least 2 GB (the store file size) memory physics in addition to the memory used by the current process, and (2) the host system is not rebooted between each restart WebLogic. If you ensure that both of these, then the operating system puts implicitly cached content of the file of the store in memory even between boots - when WebLogic starts subsequently storing files, the o/s should be the content of the file much more quickly.

  * You can move to a JDBC store. Runtime JDBC store performance are lower, but since you have generally has only a small amount of records to retrieve, startup performance should be higher in this case.

  * Not that it helps your case, but it happens that we have significant performance improvements of starting process for a future version (if all goes well a near future release).

  Tom

• My email has stopped taking in the messages from the server

  All of a sudden my Mozilla account has stopped taking in the messages from the server (yahoo). I go to the website of Yahoo mail and I see many new messages but none of them come thru. There is one exception. I get an email again and again that makes it. I've checked everything and even deleted my account and more. Nothing has changed.

  Good. You can then mark the thread as "Solved" Please?
  Thank you.

• Stop TB of creating folders on the server

  TB31.4 on W8.1 creates folders within TB & on the webmail server, and I couldn't stop it.

  I uninstalled / reinstalled TB due to other problems, created a new profile and added IMAP settings. Once connected, TB creates a box of RECEPTION and sometimes UNWANTED, on the server subfolder. While TB does not work I can explore the ones contained in Windows Explorer (...\Data\profile\ImapMail\,mail.domain.com, \INBOX.sbd) and delete, as well as on my server, but whenever I open TB, they are recreated.

  I also used the tool to subscribe and ensured that they were not, but it makes no difference.

  The server is not their creation because they are not in the Web mail until I opened TB.

  What can I try next? Is there a TB file with instructions on who should exist files I can delete or forced to "Refresh"?

  I found a solution. There is an check box labeled Allow server to replace these namespaces (screen attached). It is the same dialog window that Matt suggested above.

  After several changes of different settings I could refine it as a solution, otherwise seen as a difficulty.

  Thank you for everything!

• Computers stops after the connection to the server

  Hello geniuses.

  I'm having a strange problem and I know it won't be easy to diagnose, but let's give it a shot.  I have two iMacs in my studio, a 4 k and a 5 k, with El Capitan 10.11.2 and both connected to an ethernet network and talk to a server on a Mac Mini (latest OS and OS X Server).

  I mention the server, because I think it may be interesting, but that's just a guess.

  Basically both of these computers have a strange inability to stop.  You choose stop and they go through the motions all the way to the black screen with the toothed wheel turn, and then it just lingers there.  Forever.  Well, at least 24 hours because it is the longest, that it went unnoticed at the time.  Usually, I wait a few minutes and then make a stop of the force.  (I wait a few minutes because sometimes, not often, but sometimes, the computers will be correctly closed.)

  Both machines are wired on the server and use frequently shared fire (SMB and AFP) to load files on networked drives.  Yet once again, I mention this because this is the common point between these machines that seems to be the exception to a common use, and I wonder if the connection to the server is the process that prevents computers from closing properly.

  If anyone can help point me in the right direction would be great.

  Thank you!

  Well I guess this problem is unique to me, however, if someone else liquidate the same problem, I think I have it solved.  I changed the file sharing preferences to just AFP (disabled SMB).  This seems to have solved a variety of issues that I had with my network, including iMacs hanging on closing down.

• Mail creation of massive log files and stop the synchronization with the server

  Since the upgrade to El Capitan (10.11.1), Mail presents two problems persist:

  (1) it generates massive log files, e.g. 2015-12 - 03_IMAPSyncActivity.log these files regularly exceed 10 GB and block Mail and freeze the Mac. Mail can be over 8 GB of RAM. Once removed, Mail recreates the file and fills again, ends up doing more massive files that must also delete.

  (2) mail stop sync with my different IMAP e-mail servers. The only solution I've found that it completely delete the or the e-mail accounts and reinstalls the account. It works for a day (or even a few hours) before it just stops the synchronization, even if a connection test shows he connects with the server. This problem seems to occur on two e-mail accounts separately on two different servers / hosting companies, but not on my Gmail accounts.

  These two problems occur on both my iMac (21.5 ", mid-2011, 2.5 GHz Intel Core i5, 8 GB RAM) and MacBookPro (13', mid-2011, 2.5 GHz Intel core i5, 4 GB RAM).

  Full of ideas gratefully received!

  Thank you!

  Please take these steps to remove the mail folders 'sandbox '.

  Step 1

  Back up all data.

  Triple-click anywhere in the line below on this page to select this option:

  ~/Library/Containers/com.apple.mail

  Right-click or Ctrl-click on the highlighted line and select

  Services ▹ Reveal

  the contextual menu.* A Finder window should open up with a folder named "com.apple.mail" selected. If this is the case, move the selected folder - not only its content - on the desktop. Open the window Finder for now.

  Restart the computer. Launch Mail and test. If the problem is resolved, you may have to re-create some of your e-mail settings. Any writing paper custom that you created may be lost. Ask for instructions if you want to keep these data. You can then delete the folder that you moved and close Finder.

  CAUTION: If you change the content of the sandbox, but leave the folder itself in place, Mail may hang or starts any. Remove the tray to sand everything will be rebuilt automatically.

  Step 2

  If step 1 does not resolve the problem, repeat with this line:

  ~/Library/Containers/com.apple.MailServiceAgent

  * If you do not see the item context menu copy the selected text in the Clipboard by pressing Control-C key combination. In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.