charge port wont fully insert

I've had my iPod classic for about 4 years now.

I tried to insert the cable into the port today and it won't lock.

It is the first time that this has happened.

I checked to see if something is blocking, but it seems well.

Any suggestions

Thank you

In 'lock' function is on the side of the docking of the connection cable.  The cable 30 pin currently sold will not switch place at all, by design.  It is held in place by friction of the connection.  If your USB cable is the older type, the connector may be defective.  However, if this still works to connect the iPod, you can continue to use it.  If replace you it with the current version of the docking cable 30 pin, you should expect that it locks in place either.

Tags: iPod

Similar Questions

  • charge port problem

    Hey guys I use an Iphone 5 16 GB and, recently, I found that my charger is not working properly so I change the cable and the problem is still there.

    My iphone does not load, BUT when I put a small piece of paper or something like that under the "cable plug" (sorry I don't know what to call it) and it works perfectly.

    So my question is: is it possible to fix this? Or can I replace the charger port?

    Hello, it seems that your charger port is broke off or a cable lost the appropriate connection. Your charger to another iPhone, try to find what is the problem. If it works fine with another iPhone, which means that your device needs to fix the charger port. In this case, it is best to take it to the service of Apple.

  • How to safely clean lint or dust from my iPhone charger port 5?

    How to safely clean lint or dust from my iPhone charger port 5?

    ThreeJay,

    Here are a few tips. It is important to note that Apple recommends not compressed air.

    If none of this works for you, and you are experiencing load problems, take the FSAA or Apple Store.

  • Gen iPod 7 too tight charging port...

    Hey everybody,

    Then I come myself an iPod nano 7th generation and I think the charging port is too tight. While plugging in, you really need to press it and all by removing the plug, so pull hard, unlike my iPhone, which does not require to pull me so hard charger, it. My helmet is also too tight and I literally put a force so he can go inside. I think I might break my iPod, these problems are normal or do I have to replace my iPod?

    Thanks for your help

    Probably normal.  I have seem MANY posts here of new owners who say there is no sound during playback of songs.  It is usually because they are not pushing hard enough to plug the headphone plug into the headphone iPod (until the 'click 'sound).

  • New for iPhone charging Port 6 does not

    Recently, I had the charging port on my iPhone replaced 6, because the original had stopped working properly. With the original, I had to shake the charger autour so he could load, but it was so bad that I could only load if I it held in place. I went to a store local tech to g

    With the new port, I am able to load it with a standard charger Apple iPhone or iPad. However, it does not charge to something else - in the car, with a cell phone charger, when it is connected to my Mac - nothing. When it is connected to these other devices, the phone doesn't even it is plugged.

    Thoughts?

    Means, "went to a store local tech to fix.

    Looking for advice!

  • Satellite A300D - 13 X - charger port is tired

    Hey.

    I've had my Toshiba A300D - 13 X 16 months, was very good place to find out.
    I have three different Chargers and none of them work with the laptop when they have previously.

    So I came to the conclusion, the charger port is tired.
    I had someone around to watch and he basically said to get a new one.

    Is this a common occurrence with an easy solution?
    Is possible to change the port of the charger?

    Hello

    You plan the adapter port AC which is mounted on the motherboard is defective?
    Hmm that's too bad because in most cases, this port is soldered on the motherboard and it would not be able to remove it easily.

    First of all the whole notebook must be dismantled to get access to the motherboard.
    It's really, really difficult procedure
    and finally, it would be necessary to check what's exactly wrong

    This is definitely a job for a technician
    I'm not very well if the technician would be able to repair or replace such port m
    Maybe the whole motherboard must be replaced and it would be a costly affair

  • WANT 750se: USB charging port

    I have a HP 750-100se ENVY. The Office has 4 ports USB at the back and 4 top / front, a total of 4 ports USB 3.0 divided 50-50. USB 3.0, two albums identified by an SS has a Flash to identify it. It is my understanding that the "BOLD" lightning USB port can also serve as a fast charger for my mobile phone. I have a Samsung Galaxy S6, has the ability to use a fast charger. I used both the cable that came with my phone, and the other bought separately from Verizon, both are fast charge cables. Nor can charge my phone to anywhere near a normal cable, my phone says a full charge of 30% would take more than 4 hours.

    Is their no way to "activate" the bolt of lightning port USB is able to load quickly?

    BlueHawk172, welcome to the forum.

    All the information I found on the USB port with a bolt of lightning indicates that it can be used while the computer is turned off.  However, I have not found any information indicating it is a fast charge port.  It seems to load at normal speed.

    Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

  • Will I buy the HP Slate charge Port cable 7 4601 Micro USB DC

    Will I buy the HP Slate charge Port cable 7 4601 Micro USB DC

    Do you mean the cable separately or the power adapter is complete?

    You can buy the complete adapter of www.shopping.hp.com. Select and then tablets Tablet adapters

    You can use more cel phone usb micro cables. I use my Samsung phone cable from time to time. You can probably buy one at any cel phone shop or even a WalMart.

  • G570 is in charge but wont power on

    I noticed this morning that my G570 charge port had been "pushed" too deeply in the housing of the AC adapter to reach it. I opened the case, put the port in the right place and used a little bit of hot glue to prevent it from coming off again. When I reassembled the laptop, it will not power on. I used a multimeter to test the AC adapter and got 20V to the MOBO. When the power adapter is plugged in, the battery led lights white. (He was lit up orange when the battery was dead, but now it is white, which leads me to believe that he is in charge.)

    Can anyone think of something I could have screwed up in my assembly/disassembly which might cause this. I tried holding down the power button to clear static. Turns not with or without the battery.

    Thanks in advance!

    Oops, missed a ribbon cable that has disconnected. Works now.
    Sorry to bother someone. How can I delete a thread?

  • Charger Port with HP Slate 7 problems

    I bought the 7 Slate with Beats Audio May 19, 2014. I use the device for work and have video and photos stored on it. Last night the device was low on battery so I plugged in the charger and went on to have a conversation in an e-mail program. And without warning. the unit turned off and only would be cooler. I checked the charger on another device that takes the mini-usb, and it works fine. Use another charger and also directly from my office. Nothing. So, this morning, I get the question and found this forum.  Not very encouraging to see so many comments about it.

    This device is less than a month, and I got him with a lot of tenderness, never fell, only not negligent on the load, or the cord. Yet here I am without my camera and unable to use for my meetings. Cannot get my sync applications, such as e-mail, storage, ect.

    So I called HP Support at 1-800-474-6836 and reached (Ben), me who gave me the standard excuses, transferred to a supervisor (Lexi), who created the wait to be contacted by a case manager within 48 hours. I was told that this person, once they contact me, will offer the best solution to solve the problem and return the unit to me or replace it. I was given a case number and am waiting for the call.  It occurs to me that if there is that a lot of problems with the charger port, that the company should already obtained before this problem and had a dedicated support to maintain the retention. My time is precious, like everyone else! I understand that my product is under warranty, and there is a process to resolve these issues. But when these factories will understand that it is more than an inconvenience when they design and sell defective devices? My Home Office everything is lined with HP hardware. My only loyalty should be of significant value for them.

    So I am writing this message to maintain continuity with this community, and HP doing to address this issue. Make sure what I'm going to share the results, whether good or bad. And as a former journalist, who does not hesitate to produce a video describing this experience, knowing very well how to avoid libel and defamatory statements.

    Technology companies have made the fortune of products driven by the needs of consumers and of course the almighty dollar. But seems that has more NO integrity in the prevention of these problems don't occur in the first place. And once they do, consumers are reduced to a minimum, having to go through the hoops to just to be able to use a product they paid for. Prove me wrong! You want to be a leader in the industry? Show me things beyond to satisfy your base.

    I will update this issue as soon as I have something else to the case.

    Thus, an update!

    After a few messages for me that my information was sent to the front. I got a call from (M Miles) Corporate Tuesday afternoon. (Same day)  And after a long discussion on my frustration, both with regard to the problem happen with any replacement.  I agreed to let them replace the device with the slate update 7 beats Special Edition. I sincerely believe that Miles was friendly to my problem and that he would do everything he could to resolve the issue and keep my business of loyalty.

    I was expressing my concern that anyone would after learning that he is a typical problem for the type of charger Port.  If there is a known issue, why use this type? Find a more stable tool, so save the company, but also consumers headaches of loss and replacement altogether.

    I'm looking forward to having a device back in my hands for the work I do. Not a toy for me! If there are other problems with replacement. I'll revisit this post and report it.

    With respect in Miles and anyone who touched the case... Thank you for your prompt and considerate back how to solve my problem. I can't wait to receive my new camera, with fingers crossed. I never wanted another product in addition to HP.

  • E5 - 474G Force USB charging port

    I just bought Aspire E5 - 474G laptop. It is said in the brochure that she has turned off of the features of USB charging port, but she did not mention which took port support the feature.

    Also, I can't find a manual to the user appropriate (either on paper or online). The only thing I could find is on Windows 10.

    Take a close look at your USB ports, you will notice a small logo of battery USB on one side, it is the port of loading.

  • Battery charging port is no longer charge the battery.

    The charging port on the laptop seems to the eye, didn't notice any visible damage. I have to recharge my battery using laptop of her husband... We have the same type battery. The charger works fine.

    Any thoughts?

    Thank you

    Kit

    So much worse... spoke to a gateway tech and he told me the problem is the chipset that controls the loading or the port itself.

    Thanks anyway,

    Kit

  • Passport charge Port repair blackBerry

    I have a BB passport with a broken charging port so I need to get a new installed.

    I'm in Kitchener (Ontario), and I can't find someone with the necessary parts to make the repair. Where can I go to fix this problem?

    Hello

    If you remain in warranty AND this is considered to be a warranty issue, then of course, you need to use... any other way will imply the payment from you. This is a resource for the research of these other paths:

    Good luck!

  • BlackBerry Smartphones 8830 charger Port

    The micro-USB charger on my 8830 is damaged where it does not load. I understand that he has the ability to load to the point contact just below the standard charger port, but I am unable to find a charger pod that allows me to reload this style phone. I scoured Internet far and nothing... any suggestions?

    I just asked a friend who's 800 BlackBerry devices in their barn, told me no, those who do not charge contacts.

    However, on Crackberry, I found this:

    http://shop.CrackBerry.com/BlackBerry-power-station-and-extra-battery-charger/5A100A2789.htm

    Read the third series of observations, which leads me to believe someone somewhere he fees that way.

    So, you can get a used external - battery charger, or a new device.

    Or take the gamble on the pod to load.

    My old 8800 EU Golden these contacts, but I swear today they were the ports of chrarging. I read both ways here on the net, they are / they aren't.

  • Charger C - USB plug-and - adapter USB - C will not fully inserted

    We can insert is more completely the plug of charger USB - C OR USB - C adapter (USB - C, USB - A and HDMI).  They stopped short about 1-1, 5 mm.  Food is always delivered, but a very small movement can cause the power disconnected, even if most is still mainly in.  Data connections may be lost in the same way with potentially catastrophic effects.

    Is this a warranty issue?  It's rather disturbing if USB - C plugs/Sockets can fail if relatively fast especially in this case it's an all-Apple above adapters line and computer.

    Yes, usb ports a and c have a very known issue that no one is really writing.

    Is waved from time to time, the connections inside stops working. Also, I tested the adapter, you speak of and it heats more than all of the time and some time. Sometimes if give you him just an hour or two break and then it goes back to normal. His strange indeed.

    Also, I recommend the update to 10.11.3. There has been many corrections of bugs.

Maybe you are looking for

  • Does the bar Add on not shown by default

    When I opened a new page, with CMD - N, the new page opens with the bar of the add-on at the bottom of the window. Now, I know it is easy to remove with a combination of keys, but it happens to be a big nuisance. and I need all the open space when I'

  • How do I enter my Photosmart Premium 309 H apps?

    According to HP ePrintcenter FAQ I'm supposed to be able to download applications directly from the touchscreen on my printer 309 H (and not ePrintcenter) but I can not understand how to do this - I "touched" the options that appears on my touch scre

  • M60 Shutdown without user action

    HelloI use a Satellite M60 laptop with Win XP and I bought this laptop on 11/15/2005. I use hypotheek virus protection software and some anti-sypware tools. But from the beginning to use notebook without user action. I can't solve the problem because

  • Windows XP KB976098 update

    I have the icon on the taskbar to install update. Click to update but fails to install. The update is for changes. (KB976098).How to install or remove?

  • My 7 in 1 card reader Targus back constantly as an unknown device, nomatter what SD card is in. Help?

    Ive tried all the different ways to raise with him, and it is always the same... this card reader perfectly worked fine last night. I don't know what I can do, get very frustrated.