Storage concerns (new user of VMware)

Similar Questions

• Looking for advice for a new user to vmware

  Hi all

  Looking for a help and advice for a rookie to vmware

  We have just purchsed 3 x DL380 G8 each with 8 x 1 TB HARD drive no storage shared, and we are currently approved for most part more packs 2 x.

  What I wanted to do was to reproduce some VM so if one breaks down then we can either manually or automatically start another on another host. I'd like to reproduce our exchange 2010 essentially server but that is currently on the phyiscal material and I would need to first do a P2V conversion. I also read a few negative articles on running exchange on a virtual computer.

  I had read a little and looks like FT is outside the quetsion because of having not shared storage in place and there is also the limitation of 1vcpu. So I was wondering where to start really. For any tips, pointers, etc. will be very much appreciated.

  Thanks in advance for any help.

  Welcome to the communities...

  As you use Essentials Plus, you can order vSphere Storage Appliance you can use a shared storage. Make sure that the hardware is compatiable with vSA (http://blogs.vmware.com/vsphere/2012/12/major-hcl-changes-for-the-vsphere-storage-appliance-vsa.html)

  What I wanted to do was to reproduce some VM so if one breaks down then we can either manually or automatically start another on another host

  vSphere HA done for you if you are eligible.

• Words of past & favorite appeared to a new user who portable Mozilla on the same computer resinstalled (even after history, cookies etc. were deleted)

  Words of past & favorite appeared to a new user who portable Mozilla on the same computer resinstalled (even after history, cookies etc. were deleted)

  Firefox would use a profile previously used folder if this user would use the same Windows account.
  It is always better to give each user their own Windows user account and protect your own account with a password if you are concerned about privacy issues.

  You can use the Profile Manager to delete all the files and the profile folder.

  • http://KB.mozillazine.org/Profile_Manager
  • https://support.Mozilla.org/KB/managing+profiles

• Commissioning of new users on TC6.2 CLI

  Hi all

  We use CUCM for provisioning where as far as I know, all users, except admin, should be configured manually to form endpoints.

  Would it not possible to supply new users through endpoints TC6.2 CLI. Currently we are able to add users only via the Web interface in "Configuration > User Administration > add a new user...". ».

  I crossed Administrator's guide and the guide to the API and found nothing on this subject. Can someone help me?

  Concerning

  Ondrej

  Ondrej salvation,

  Currently, it is not possible to create the users of TC endpoints from the web interface. Cisco has even removed the 'adduser' from the root so CLI command. So it's really not possible.

  If you really need to add users from the web interface, I suggest you to raise a feature request.  =)

  Concerning

  Paulo Souza

  Please note the answers and mark it as "answered" as appropriate.

• Windows 8 on my menu settings pc no add a option to add a new user account

  I created a user account from Microsoft and a local account, I see no option to add a new account on the pc settings page.

  I created a user account from Microsoft and a local account, I see no option to add a new account on the pc settings page.

  Hello

  If you are connected with a nonadministrator account, you see not the user has added in the PC settings.

  You must be logged in with an administrator account to add a new user account.

  Concerning

• Unable to appoint a new user

  Hello

  We are facing problem in the allocation of new user in creative cloud.

  Please contact Adobe support for the team:

  Using creative cloud | Creative cloud to teams

  Creative cloud for teams. Creative blog Cloud by Adobe

  Business help | Manage users

  Business help | Manage groups

  Concerning

  Stéphane

• Recently, I had to create a new user profile on my computer and am currently loaded with my accounting software of the migration to the new profile.

  I am hoping there is a simpler alternative to migrate my work in lightroom, as if it were a new computer.  The paths are the same.

  I am a little disappointed because I thought at the very least, to logging into the software would reach out to the cloud and find my complete collections.

  After all, I can view on my mobile.

  In any case, I just want to get my work without having to do another import.   There must be a reason behind these weekly backups right?  Is there a way to recover them?

  Hi moto66,

  Greetings.

  What version of LR you use.

  You need to transfer your catalog and images on the new user account.

  Once you have all the images and catalogue on this new user account, given correctly, related images you should be able to see your collections.

  And also make sure that there is no broken in the catalog and images link, if this link to find missing persons of the images while transferring data to a new user account use

  • https://helpx.Adobe.com/Lightroom/help/locate-missing-photos.html

  Concerning

  Rohit

• Cannot create a new user in vCO - error LDAP 53

  Hi guys,.

  It seems to be an old topic, but it is still not resolved correctly.

  I would like to create a new user in vCO workflow, and I read this discussion: http://communities.vmware.com/message/2190530#2190530

  We faced the same problem, the same error, and I went through all the solutions proposed in this discussion, which are:

  • create a user in a group or ORGANIZATIONAL unit, with or without password
  • ADC version: 1.0.2 vCenter Server version: 5.1.0
  • Domain controller authenticate certificate imported to vCO
  • Use SLL - verified
  • No worries about the RIGHT of ACCESS, I am the admin, I can't do anything
  • Server and client rebooted a million times

  However, it still does not work, keep throw me the same error:

  

  No additional details on this issue will be appreciated.

  Thank you

  The password you provide meets the complexity requirements?

• Add a new user through Host profiles

  Hi guys,.

  I was wondering if anyone knows if I create a new user on a single ESXi host and use this host as my host of reference for a profile of the host. If the new user is contained in the profile of the host, and every time the profile is applied it will be applied to all other ESX host?

  Thank you

  D

  Not with a profile of the host, read the doc tech following, which explains what is included in Host Proflies.

  http://www.VMware.com/files/PDF/Techpaper/VMW-host-profiles-tech-overview.PDF

  If you want to manage the creation of users who will have to do with a script.

• install the first instance for new user

  I have a laptop that did a test of cloud installed for the staff.

  Staff left in June and now I have new members of staff, signed in November. They need training dreamweaver so I tried to install trial for them so that they can play with tests. When they connect to a creative cloud with the new username, it still says trial expired. What new user must do to get rid of the old information from the coming trial on their account.

  Concerning

  Frvitv that tests are not related to a particular user account or an Adobe ID.  If the software has already been evaluated on a particular computer, then you will need to assess on a different computer.

  You can work with your representative commercial Adobe if you have a specific need to temporarily increase your licenses.

• New user created does not all data in reports

  Hi all
  
  I use Hyperion Planning 11.1.2.1. I have a problem when I created a new user in the system through shared Services. Reports are reports and analysis reports.
  
  I have reproduced a current user of the system and applied the same groups and provisions. However, the new user may not display all the data in the reports. However, the current user is able to do. I'm quite literally baffled.
  
  The existing user has been given to the provision of "Planner". In addition, the existing user has dimension security applied as well. It works very well with the existing user, as when I connect as long as existing user, the data is available only for groups and dimensions that it has been assigned to. But when I apply the same groups and provisions to the newly created user, I get absolutely no data, although I can see the report.
  
  But if I ask the Essbase Cluster: provision of administrator to the new user, all data is viewable in the reports, regardless of the dimension of security.
  
  I'd appreciate emergency assistance to get this issue resolved.
  
  Concerning

  Go to EAS, then continue with your application/db and view filters, I guess that for previous users filters?
  If so your new user has filters, if maybe you need to refresh the security filter, of planning.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• New user Admin cannot SSH

  Hello

  I need to provide information so that they are able to carry out remote maintenance SAN from Dell. Part of this information is the user name and the password of a user that can cannect to the hosts that are connected to the San via SSH. I don't want to give the root password, so I created a new user who is an administrator, and want to give them these details to the user.

  I changed the secuiity profile, sort of SSH is enabled. However, when I try to connect to the ESX host using Putty it says access denied. I can connect on the same host using PuTTY if I log in as root. There no option in ESX 4.1 to select "Grant access the user's shell" as in versions previous, when you set up the user, so there must be an entry in a configuration somewhere file that specifies that the users can connect via SSH? Anyone know where is this file, or if not a file, how do I enable SSH access to a specified user?

  Thank you

  Ben

  OK let's check how it works for me with ESXi (I just tested it with two different servers ESXi 4.1, build/updates-numbers):

  1 useradd testuser

  2 passwd testuser

  3 /etc/security/access.conf line: +: testuseruser:ALL

  4. switch shell/bin/Ash in/etc/passwd

  5 set the directory in/etc/passwd. / Home / is not available on ESXi, so I change to / or/tmp

  6 ssh connection works - without any restart of the service

  Please check all these points again to make shure you erase the line access.conf etc.

  If this does not help, proceed as follows after the access denied message:

  In Putty, press ctrl + right on the mouse-> 'Event Log' and take a look what part of authentication has failed.

  Concerning

• create a new user - without ssh access

  Hello!

  
  I created a new user with vSphere Client and have grant Shell-Login.

  But if I want to connect with ssh I get the message "access denied!"

  What should I do?

  THX

  Hansi

  Hello

  one)

  in the etc/security/access.conf, you must assign a line:

  +: username:ALL

  front-line: ALL:ALL!

  or

  (b)

  Add the user to the Group root (usermod - a-g root username)

  I would have preferred a

  Concerning

• How to reallocate a license to a new user?

  Hi, we had recently a member of our leave team company and I need to reassign the license to a new user, how do I do this?

  Thank you

  Jon Benton

  You must connect to the management console logging as the primary administrator of the team, remove the name before the e-mail address to which the seat has been entrusted.

  Now, you can reassign the seat to another Member.

  http://helpx.Adobe.com/creative-cloud/help/manage-creative-cloud-teams-membership.html

  Concerning

  Baudier

• Having problems to import tables to a new user with new tablespace

  Hi all
  
  Here is my scenario:
  
  I have a user, the latter having data stored in storage - say q, w, e.
  I would like to export all the tabledata and import it to a new user USER_B. All data imported to B must be kept in the USER_B_PERM tablespace.
  
  I tried a lot of things yet, but imp always try importing the tables for the original tablespaces.
  
  What have I done now:
  
  
  create new databases:
  
  create tablespace USER_B_PERM
  DATAFILE ' / oradata_big, path, USER_B, USER_B_PERM. DBF' SIZE 126 M
  SIZE UNIFORM LOCAL 125M MANAGEMENT MEASURE;
  
  ALTER DATABASE DATAFILE ' / oradata_big, path, USER_B, USER_B_PERM. DBF'
  AUTOEXTEND ON;
  
  
  create temporary tablespace USER_B_TEMP
  TEMPFILE ' / oradata_big, path, USER_B, USER_B_TEMP. DBF' SIZE 126 M
  SIZE UNIFORM LOCAL 125M MANAGEMENT MEASURE;
  
  ALTER DATABASE TEMPFILE ' / oradata_big, path, USER_B, USER_B_TEMP. DBF'
  AUTOEXTEND ON MAXSIZE 3000M;
  
  
  CREATE user B:
  
  
  -SQL USER
  CREATE USER USER_B IDENTIFIED BY USER_B
  DEFAULT TABLESPACE "USER_B_PERM".
  TEMPORARY TABLESPACE "USER_B_TEMP";
  
  -ROLES
  GRANT "RESOURCE" TO USER_B;
  'CONNECT' GRANT TO USER_B.
  ALTER USER USER_B ROLE BY DEFAULT "RESOURCE", "CONNECT";
  
  -SYSTEM PRIVILEGES
  GRANT CREATE ANY VIEW TO USER_B;
  REVOKE A USER_B UNLIMITED TABLESPACE;
  change the quota USER_B unlimited user on USER_B_PERM.
  
  export of old data
  owner file = exp_user_a.exp exp = USER_A compatible exp.log = LINES Y = Y = log
  
  
  new user import
  IMP file = exp_user_a.exp fromuser = USER_A, USER_B log = imp.log ROWS = touser = Y
  
  
  
  Because I revoked the UNLIMITED TABLESPACE privilege imp creates tables in the original storage spaces (q, w, e) but the data import failed:
  ORA-01536: space-Programmvielfalt fur Tablespace 'q' passed.
  
  Any ideas? I don't see what is different to the docs:
  http://docs.Oracle.com/CD/B19306_01/server.102/b14215/exp_imp.htm#i1023312
  
  
  We are using oracle 11.2.0.1 and we have still a few columns long raw if it matters.
  
  Thanks in advance,
  Andreas

  I tried a lot of things yet, but imp always try importing the tables for the original tablespaces.

  If the table was created with the specific tablespace clause, then it will go in particular tablespace.

  I would like to export all the tabledata and import it to a new user USER_B. All data imported to B must be kept in the USER_B_PERM tablespace.

  easy to solve this problem in impdp datapump, use clause REMAP_TABLESPACE.

  http://docs.Oracle.com/CD/B19306_01/server.102/b14215/dp_import.htm