shut-off valve, a switch by a second switch

Hello, I am developing a software for which I want to be able to open and close the valves through switches toggle. So, I want to be able to open and close the valves individually. However, it should also be possible close all valves (and turn the rocker downwards) by pressing a firing button. I insist on the use of toggle switches, which visually also switch on position close when you press this button for shooting a 'close all '. My reason to insist on this point, is because I am developing an exact copy of a program written in Labwindows. In this original program, how it works, and I am convinced that it should be possible. I saw already 3 days, trying many options, like 'create the local variable' and 'Create the property node' still not found how.

Sincere greetings, Theo de Groot


Tags: NI Software

Similar Questions

  • Satellite L650 - random instant shut-off valve

    Was using my laptop and all of a sudden he stops instantly. Turned it on and it happened once again quite close at the start.

    So I thought it was a battery problem, I took and used only AC power. It has worked well for the rest of the night. I have yet to test the battery and it turns off again.

    On the morning, it was on straight for hours then until 18:00 ish, you instantly stop again. It turned on and once again it happened close to start.

    This may be the cause? Overheating during the day? Form questionable ca, he needs a few twists before recharging, but then that's fine.

    Hello

    I think that you should first check if the fans and the vents are free of dust.
    For most high temperature is responsible for this stop automatic downs.

    Clean fans/grids in the past? Isn't it?
    I put t know how old your laptop is but the unit must be cleaned periodically to prevent overheating of the laptop.

    Use a common compressed air spray that would help you to get rid of the dust.

    I m wondering about the results

  • Bluetooth automated shut-off valve, possible disk external hard usb

    We bought a new iMac, retina 5K 27 "end 2015 when it came out. Since the first day we have been faced with a problem where the bluetooth disconnects, Magic Mouse 2 Magic Keyboard are disconnected and then reconnected. The mouse freezes, and about 3 to 5 seconds later the notification "lost connection" flashes on the screen, then the reconnect upward and will begin working. The entire range of not being able to use the keyboard and the mouse will last about 7 to 10 seconds. It happens randomly, maybe once or twice a day, or more.

    I opened two cases with Apple support, all first, they had me reset the SMC, PRAM, a bunch of stuff. It seems not really to improve. The second said to reinstall the operating system, "do a reset. I still have to do it, mainly because it is a PC brand new and has had the problem since the first day.

    Today, I noticed that the Time Machine backup seemed to start right at the time the connected bluetooth. We have two new Western Digital USB hard drives connected, it is formatted HFS + for the backup Time Machine, another ExFAT for the media and the extra space. Could the external USB drives cause bluetooth disconnection as bluetooth seems to be connected via the USB controller? If so, how do fix us this without disconnecting USB readers? Looks like they shouldn't cause the USB or bluetooth to reset!

    For such an expensive computer, this issue is extremely frustrating, considering Apple support could not resolve. For any help or suggestions much appreciated, thank you!

    Logging HFS +.

    Device name: my passport 0829

    Media name: WD My Passport 0829 Media

    ExFAT

    Device name: my passport 0827

    Media name: WD My Passport 0827 Media

    Unreliable wireless performance may occur when external USB 3.0 devices are close

  • Accidentally shut-off valve in the process of Sir on my laptop, now Windows does not...

    As the title suggests my... If was an accident, but I stopped the process of Sir in the Task Manager window and I got a blue screen of death. He created a backup file and then turns off. I tried to turn it back on, but all I get is an error message from Braodcom and Media test failed message and an operating system not found message. I don't know what to do and I'm very inportant information on my hard drive that I can't lose.

    Is there a way to fix this or am I GROUND?

    HI U.S. - soldierARNG.

    What is the exact error message on blue screen?

    Check that there is no CD/DVD in your CD/DVD drive.

    Disconnect all hardware devices.

    Check the BIOS to make sure that your hard drive is always selected on the primary boot device.

    You have access to a Windows recovery disk? If so, follow the steps in this document to complete the Startup Repair.

  • shut-off valve suddenly without notice.

    When using my notebook of FUJISIEMEN amilopro the systen suddenly trips off without warning and I discovered that less is still very hot.

    What could be the cause. I started expriencing this since the advent of summer in the tempreture.

    Thank you.

    Ensure that the vent ports are clear, and you use the laptop on a solid surface, IE not your bed

  • On Windows XP, I can't install Service pack 3. Keep saying cannot find the specified file and install shut-off valves

    I have re-uploaded service Pack3, about 3 times, each time in the middle of the installation, it gives a message with no error saying number cannot find specified file and stop the installation, I tried to do this with the firewall disabled, and even with the antivirus disabled. I can't use some programs because they require service pack 3. Please help me get installed so I can use the programs I already paid for.

    Release notes for Windows XP Service Pack 3
    http://support.Microsoft.com/kb/936929

    The space of hard disk required for Windows XP Service Pack 3
    http://support.Microsoft.com/kb/947311

    Steps to take before you install Windows XP Service Pack 3
    http://support.Microsoft.com/kb/950717

    How to troubleshoot an installation fails on Windows XP Service Pack 3
    http://support.Microsoft.com/kb/950718

    How to obtain the latest Windows XP service pack
    http://support.Microsoft.com/kb/322389

    Download Service Pack 3 (SP3) from the Microsoft Download Center if you have any problems obtaining the service pack from Windows Update, you can download the package of standalone update from the Download Center. This page will say that this installation package is intended for it professionals and developers. However, you can download this file safely. The following file is available for download from the Microsoft Download Center:

    Download the Windows XP Service Pack 3 package now

    (http://www.microsoft.com/downloads/details.aspx?FamilyId=5B33B5A8-5E76-401F-BE08-1E1555D4F3D4)

    Important These service packs apply only to 32-bit versions of Windows XP.

  • W8 install shut-off valves

    Hi, my ssd crashed with w10, equip new ssd, don't have installation disk w8, it install, comes to preparing the device, get to 100% the reboots and nothing happens

    I want to know how you managed to spend 8 > 10 if it was not a legal facility.

    It's a legal installation of 8 to 10, is the advice I give to reinstall 10:

    Find media on the download software pagecreation tool.

    When your free upgrade to 10 initially enabled Microsoft will keep the details of hardware Configuration on their servers for recognition purposes if you need to reinstall 10.

    'Activation in Windows 10' (digital rights)

    https://support.Microsoft.com/en-AU/help/12440/Windows-10-activation

  • Help! Lenovo B570 random Shut off and Start Up problems

    My Lenovo laptop B570 has had problems lately. It is only a month, but has frequent problems.

    My first question is that it stops randomly no matter what I do. I will be checking my email or anything else online then the screen is black and the power light is off. Happened almost every day, and I'm going to College soon so I don't want to cut when I anymore.

    My second problem is that sometimes when I start the laptop, either normally or after the random shut off, it will not connect properly. Sometimes I use the fingerprint reader or type in the password. It will say 'Welcome', then it will say "Please wait", but it will not disappear no matter how long I wait, and I left for 20 minutes like that before.

    My third and final question is whether the laptop freezes sometimes or all programs cease to operate and remain unusable. When I am able to boot successfully and connect, I open any program, and it will open, then immediately, it will say "not responding". When this happens, and I click anywhere else, everything becomes unusable, even the start menu.

    My solution to all these problems was to hold down the power button until the laptop turns off, start it in Mode without failure, then restart. I installed McAfee antivirus and Malwarebyte anti-malware software and scanned the whole laptop, but there has been no detection with either. If anyone has had similar problems, or has a solution to my problem, I want to say thank you in advance.

    material or heating problem. try bios flash update, if you access windows otherwise call lenovo support line.

    http://consumersupport.Lenovo.com/UK/en/DriversDownloads/drivers_list.aspx?CategoryID=91249

  • Fuze will shut off randomly

    Fuze will shut off randomly, then it takes a few seconds to turn on. After that I see the symbol of welcome, it says media refreshing and it takes about 5 minutes to complete. It is very annoying! Please a little help.

    Normally, the "rocket" is enough to update the database on data transfers.  If the SD/SDHC card is not inserted, the database will not refreshing at startup.

    I have an eye on the music files for problems with ID3 tags and album art files especially.

    First of all, connect the "rocket" in MSC mode and check the memory of Sansa to find errors in the file system: right-click on my computer, and then select manage.  Click on the "rocket" and check the drive for errors.  Do this for the two logical drive letters assigned to the "rocket".

    Don't forget that your ID3 tags are written with tags ID3 v2.3 ISO 8859-1 (Latin-1) .  Great use for this is MP3Tag, a free utility.  In addition, be sure that your JPGs for your music (cover) are 300 x 300 or smaller.  The images are not necessarily greater then 15 to 20 KB or more, otherwise, you can run into questions.

    The "rocket" can freeze and possible can turn off if you try to play a corrupted music file.

    A simple way to know is by following the steps above, or format the "rocket" and reload your music a few tracks at a time, to see that all is well.  Remember, the "rocket" Formatting erases all the data (media) of the device, so have copies ready to reload on your Sansa backup.

    µsansa

  • The green light on the power supply shuts off when I try to turn on my pc to my thought is a power supp

    The green power light on the power supply shuts off when I press the power button / stop on the fron of the pc.  I think power but would it be the switch?

    It is a sign that the PSU has failed, but here's a convenience store. If you had mentioned the model #, I could have linked a suitable replacement.

    http://support.HP.com/us-en/document/bph06788

  • Dv7-3165dx notebook computer unexpectedly shuts off when the battery is low

    Dv7-3165dx notebook computer unexpectedly shuts off when the battery is low. Even at 17%.

    This gets really annoying, that I keep losing jobs! Before it used to give me a warning and then Hibernate. Now there is no warning and it turns off without saving anything.

    Help!

    The laptop is a year old.

    I already ran the diagonsitic battery and it said the battery was good.

    OK, I think I finally figured it by changing power options, and I think that the way you reset the battery also helped.

    Here are the parameters:

    reserve battery level (this is when the popup will appear).

    10%

    low battery (this is when the low battery action will be performed).

    8%

    critical battery level (my computer would die at this point.)

    7%

    low battery action: sleep, sleep (this customize to your liking).

    battery low notification: on (hold on).

    critical battery action: sleep, sleep (my computer died already in criticism.)

  • Qosmio G35 display shuts off and won't turn back on

    After sitting for some time an hour or more generally the screen shuts off and no button can't seem to get the monitor to turn back.

    The Qosmio G35 still works and every once in a while, the screen turns on, but I don't know why.

    Have you tried to update the display driver and BIOS?

    I read about a similar question in this forum and especially a BIOS update and update the graphics driver helps solve this problem.

    Good luck

  • Computer shuts off and comes back over and over again trying to open a session

    Original title: when I turn on the computer and the connection, it will compromise the destop and then shuts off and comes back, over and over again. I have run and remove detections from virus and bug, but it still does not work. Help
    Can I delete something so that my computer turned on? After f8 button the window xp from microsoft to address blue lights with a list of things to do in which nothing has allowed so far.

    Hi bonnieb1941,

    1. When did you start to question?

    2. you remember to make changes to the computer before this problem?

    3. How have you tried to run the virus and bug checks?

    4. is this the machine is disconnected and re-login in back or just reboot?

    Step 1:

    If the machine is in continuous loop, then try to disable the auto restart in case of system error and let us know the error code.

    a. restart your computer and start pressing F8 on your keyboard. On a computer that is configured to start to multiple operating systems, you can press the F8 key when the Boot Menu appears.

    b. Select disables automatic system failure reboot when the Windows Advanced Options menu is displayed and press ENTER.

    Check the link for more information:

    A description of the options to start in Windows XP Mode

    http://support.Microsoft.com/kb/315222

    Step 2:

    Also, try unplugging the external devices connected to the system and check if the system boots normally.

    Hope this information is useful.

    Jeremy K
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • KDL-46XBR9 shuts off and the power light flashes red

    KDL-46XBR9 shuts off and the power light flashes red

    It flashes ten times, then rehearsals.

  • Installed IE 8 months ago, and now computer will shut off randomly.

    I used products Norton for years but recently uninstalled all applications to perform specific Microsoft SEssentials & another difficulty it Apps to try & fix the problem. There is no loss of data or any other result indicating a problem of malicious. Only, the computer shuts off randomly & wait to see how long I want to try & recreate everything hit earlier, causing the problem?

    Hello Stephen1159,

    I would make to Windows XP from checking for disk errors.  I've added the link below to do so.  Please let us know status.

    The disk error checking:

    http://support.Microsoft.com/kb/315265

    Thank you

Maybe you are looking for

  • Why my log shows an error MSPublisher when I have zero installed software MS

    In general, I only put my iMac to sleep then when I had to start rather than wake up it I checked the log. I have not found no answer to my question about why he had to be restarted, but all looking at, I discovered this message: " July 24, 2016, 13:

  • missing files for the language selection

    I took delivery of a new Scandisk clip + 4 GB, he released and pulled upward and that's all I could do was put it in a foreign language, looked like Chinese, absolutely nothing can be done to change this. Back in the area he went straight back to Ama

  • Services edit problems on RV016

    I need to change some firewall rules and the service on a RV016 using remote access management. I need to add a few new rules of firewall and need to add new services. But it is impossible to add a service. I click on "Service Management"-online "Ser

  • MeetingPlace Express - help please?

    Hi all I'm a MPE installation planning and research to import users via a CSV file. Unfortunately, according to (http://www.cisco.com/en/US/partner/products/ps6533/products_administration_guide_chapter09186a00805edd00.html#wp1069753) it seems that yo

  • Publication parameters to create a single folder, including the CreateJS library.

    I need all the published files in a folder (no subfolders) and also to include the CreateJS library rather than pulling them from a host online. What parameters of publication I need please?