storage devices does not

Similar Questions

• Message "USB Mass Storage Device does not work properly"

  Ran AVG PC tune up and referred the problem message "USB storage device work does not correctly. I went to Device Manager, clicked on "bus USB controllers. He showed the device with a yellow exclamation point USB mass storage. I have double clicked on it, went to the drivers and updated the driver. I received a message that the driver was already updated and got a message "device cannot start (code 10).»

  I thought that maybe he was looking for the storage device of mass external and plugged on the USB port. He has shown in the Device Manager under the other mass storage device but had no yellow exclamation point (I guess that means it's very good).

  Is there an internal procedure and what can I do about this problem? My development program, said that this mistake could cause my computer crashes often or he can go for a long time without replying (which it does).

  Hate to be chatty but I wanted to present all the facts.

  Can someone please help me get this figured out? Thank you in advance.

  Hello Sammy,.

  Please provide detailed information about your question. I appreciate the step by step troubleshooting, and pain that you have taken to resolve your problem. However, there are a few steps more that we can try to diagnose the root cause and to check the health of your system, to solve the problem permanently.

  Microsoft does not recommend using third party software melody. That running these software can damage records.

  For the problem with the error code 10, I would ask you to try the steps below:

  A Code 10 error is generated in the Device Manager in one of the following situations:

  1. Device Manager cannot start the device.
  2. One of the pilots who needs the unit does not start.
  3. The Device Manager has insufficient information to recognize the error that spread upwards by the device driver.

  Note: In this case, the Code 10 error can be a very generic message indicating some sort of unspecified driver or device problem.

  Error Code 10 is mainly related to devices and hardware driver problems or compatibility problems between the drivers of equipment and additional software that is installed in Windows. Therefore, we recommend that solve you these problems with emphasis on device drivers, configuration of device problems and hardware compatibility issues.

  I suggest you to follow the steps described in the following Microsoft article and see if it works for you.

  FIX: "this device cannot start" error Code 10 in the Device Manager in Windows

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Thank you.

• Passport Mass Storage Device does not appear to the top, when I plugged in the USB Port on Windows XP

  I have connected my passport mass storage device to a USB port and it notifies as new hardware, but it did not show in my computer anywhere. However, I installed and uninstalled several times my computer.

  Hello

  1. what happens when you plug the device to your computer, you get an error message?

  2. don't you make changes to the computer until the problem occurred?

  I suggest you try the steps mentioned below and check if it helps.

  Method 1:

   Try to connect the Passport mass storage device into the other USB port or try to connect the Passport mass storage device in another computer and verify that the problem persists.

  Method 2: Try running the Fixit tool from the link below.

  Hardware devices do not work or are not detected in Windows:
  http://support.Microsoft.com/GP/hardware_device_problems

  Method 3: Also try to follow the steps from the link below.

  A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive: http://support.microsoft.com/kb/925196

  Hope this information is useful.

• Storage device does not. Computer ask me to format it before that I can use it.__The device worked fine before and has over 200 G of files it contains.

  My seagate expansion drivre has been brilliant so far. Last night I opened the properties and I check the box that says "compress files to save disk space" or something like that. Since I could not open the damn thing. If I try to open a window telling me that I need to fomat the disc in this drive (F) until I can use it. I can't findout how to cancel compression of files and I don't want to format the drive because I think that will delete all my files. I think that the compression of the files can be called "Zipper" and I need to extract, but I can't find any option to do this. Can anyone help? If I didn't leave enough information please ask what you need to know that I will answer as soon as POSSIBLE.

  Test your player:
  http://www.Seagate.com/www/en-us/support/downloads/SeaTools

  Read the entire thread:
  The disk in drive F is not formatted. Want to format it now?
  http://www.TechSpot.com/VB/topic34363.html

  I hope I could help

• My DVD player does not work and all the information I can find is "this device does not work correctly.

  Hi, I have Windows Vista and I use a computer laptop Dell studio. When I insert a disc into my CD/DVD drive, the drive spins and it looks like it is about to start and makes the same noise start several times and then just stops. My computer does not record that there is a disc there. If I double click on the DVD drive in 'My computer' it ejects my disc and says "insert the disc in drive E".

  I went on the 'repair' Microsoft online scanner and it told me that there is a problem, but he can fix it. In Device Manager, under CD/DVD-ROM readers I have Optiarc DVD +-RW AD - 7640S. Under device status - general - properties, it says "this device does not work correctly. He also says that I have the updated driver.

  I even uninstalled the driver as a last resort and then restarted my computer. It reinstalled the driver for me, but there was no change. Please help me!

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are some registry
  entries that do not fix the resolution of problems and those who "could" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys in my opinion, are those in question - for the CD/DVD drive of course subkeys as
  There will be other subkeys in these keys. Do not forget to ask involved specific keys as well as the
  Parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• my iphone 6s is stolen I had activated find my iphone, but now the device does not appear on my icloud find my iphone please suggest what to do.

  my iphone 6s is stolen I had activated find my iphone, but now the device does not appear on my icloud find my iphone please suggest what to do.

  If your iPhone, iPad or iPod touch is lost or stolen - Apple supports

• Equium P300-16 t - Synaptics Pointing Device does not work correctly

  I hope someone can help.

  Just bought this laptop and for some reason, I get an error message come saying the Synaptics Pointing Device does not work properly. The touchpad loses some functions and a warning appears informing me of this. I can still use it, but disappears from the icon in the taskbar with the flashing blue dot - when I go into the control panel it says the driver and he asks if I installed another ps/2 pointing device driver

  Looking forward to any help you can give.

  Suggest that you reinstall simply touch pad drivers. Maybe new version?
  So, just uninstall drivers, restart your computer, reinstall the drivers.

  Drivers are located on the download page of European drivers.

• SD-R2312 device does not appear in the hardware Manager

  I have several problems with my Toshiba SD-R2312 Windows XP. Cannot open CD, device does not appear in the hardware Manager, drive is not displayed anywhere.

  First time it happened, I was able to reactivate it as described here.
  http://www.TechSpot.com/VB/all/Windows/t-28912-desperation-Toshiba-DVDROM-malfunction-possible-missing-driver.html

  After working for a few weeks, the drive is 'gone' once again, same symptoms as the first time.
  Try the registry fix again, I found that there are still "UpperFilters" (which I've deleted again), but not Lowerfilters.
  However, which did not help this time.

  I have no "unknown" devices that I could delete (see http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=6548&messageID=22638).

  Does anyone have an idea how to get the drive working again? Is there a way to prevent that from happening again?

  Thanks in advance.

  Hello

  If the drive is not displayed in Windows Explorer, perhaps this method can help. Try it!

• Satellite L300-19F and WXP - audio device does not work

  Hello

  I installed Windows XP Home edition on my Satellite L300-19f after change SATA compatibility I installed Windows XP Home edition and installed all the drivers and everything's fine, but the audio device does not work. I downloaded the driver from DOWNLOAD & support center, but he can not detect.

  BTW: he used to work on Vista.
  What should I do?
  And thank you

  -Download driver audio Realtek HD Realtek page.
  -Go to the Device Manager
  -Remove the sound card.
  -Remove the High definition Audio Controller
  -Restart the laptop.
  -Reinstall the Realtek HD audio driver

• Satellite U400-17R - audio device does not work after installing XP

  Hello

  I bought a model U400-17R with Vista Home. I formatted and installed Windows XP Professional download drivers XP Toshiba site.

  Everything works, but my Sound Device does not work. When I check in the Manager of devices the Sound Drivers are there and it says working properly.

  I'm lost... Can someone please help?

  Hello

  I think you have the same problem like me a few months ago.
  I installed Win XP SP2

  The t is not his work because I didn't install the patches MS; KB835221 & KB888111

  The patches must be installed as a first step, before the audio driver is installed.
  If you have already installed the audio driver, then you must remove (uninstall) before install you the patches Ms.

  PS: The MS patches are part of the SP3

• Pavilion dv6 7011tx: bluetooth device does not

  my bluetooth device does not work, so I uninstalled the bluetooth software and install the new driver. now while I'm installing the new driver, it indicates "no bluetooth device was detected. Please make sure that your bluetooth device is connected correctly in order to continue installation '.» Please help me

  Hello:

  You can try reinstalling own W8 and see if the BT radio appears.

  As he was working on W8, he must have worked on W10.

  I assumed you are passed directly from W7 to W10, and if you had the connection manager software installed in W7, which could adversely affect the BT radio does not not on W10.

• dose of the device does not react to the C++ code

  Hello.

  I have meassuring keithley 237 system, connected to the port COM4.

  And I commands manual keithley insturment.

  When I use assistant LabView Instrument IO and put in "query and analyze" the steps of these commands, the device reacts as it should.

  But when I try to write and run my own C++ code, device does not react.

  just no reaction at all!

  Maybe someone can help me and tell me what's missing.

  Here's my C++ code:

  #include #include "visa.h"
  
  using namespace std;int main (int argc, char *argv[]){       ViStatus status;    ViSession defaultRM, instr;    /* Open Default RM */    status = viOpenDefaultRM(&defaultRM);
  
      if (status != VI_SUCCESS) {        /* Error Initializing VISA...exiting */             return -1;        }
  
      /* Access other resources */    status = viOpen(defaultRM, "ASRL4::INSTR", VI_NULL, VI_NULL, &instr);
  
      // here I send commands to device    viPrintf(defaultRM, "F1,0X");           //  "F1,0X" and all another symbols in "" are just commands from keithley manual.          viPrintf(defaultRM, "B1E-6,0,X");    viPrintf(defaultRM, "L11,0X");    viPrintf(defaultRM, "P3X");    viPrintf(defaultRM, "O0X");    viPrintf(defaultRM, "N1X");    viPrintf(defaultRM, "H0X");
  
      viClose(instr);    viClose(defaultRM);
  
  return 0;}
  

  Hello

  There is an obvious problem in your code: viPrintf () accepts as a first parameter a session handle, which is "instr" variable returned by viOpen () in your case. Using the default resource manager leads to incorrect results (BTW, you must add to your code an error checking: I expect viPrintf () to return VI_ERROR_INV_OBJECT or similar error).

  As long as an additional indicator, I noticed that you use no termination for your messages: you should check in the documentation for the device if you need to add a stop character (the instruments most want a '\r' or '\r\n' sequence at the end of the messages to accept).

• I get an error code, ""this device does not work properly because Windows cannot load the drivers required for this device. " (Code 31) "on the computer.

  My drive hard seagate is not recognized on my laptop, I can see it in the legacy of the laptop but has an exclamation deside it, there a message when I tried to solve the problems, error was not fixed, the device status is "this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) »

  Is anyone know how can I access my hard drive again?

  Thank you

  Hello

  You has made changes to the system before the error appearing?  Cancel the changes.

  (1) in Device Manager > right click on the driver, and then select uninstall

  Reboot and Windows will reload the driver

  (2) remove the upper & lower filters that cause errors in Code 31

  http://pcsupport.about.com/od/driverssupport/HT/UpperFilters-LowerFilters.htm

  Access the manufacturer's Web site and search for updated driver

• volume device does not

  original title: volume issues

  I recently rebooted my computer and the volume device does not work, how can I add volume device to turn my volume to work?

  Uninstall the driver, reboot the system. The attempt to install the same driver for Windows Vista using Windows troubleshooting. Make a right click on the file executable/installer driver-> properties and select the Compatibility tab. Click on the box to check run this program in compatibility mode for option and select Windows Vista from the drop-down list. then try to install the device driver using run as administrator.

  Resources:

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx?type=hardware

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

• Direct3D devices does not work on Windows XP

  Direct3D devices does not work on Windows XP

  Hello
  1. what exactly happens when you try to access Direct3d devices?
  2. you get any error message?
  3. If it works well before?
  4. don't you make changes to the computer until the problem occurred?
   
  I suggest you to follow the steps below and check if it helps:
  
  Method 1: Try to uninstall and reinstall the Direct X on Windows XP:
  Here's how:
  a. open the registry editor by running Regedit from start > run.
  b. then, navigate to the following registry key.
  HKEY_LOCAL_MACHINE\Software\Microsoft\DirectX
  c. here, delete the DirectX folder, exit the registry editor and restart your computer XP.
  d. when starting the system, after the reboot, your system will be reinstall DirectX 8.1 which is originally preinstalled Windows XP operating system.
  Once it is done the upgrade to x 9 live.
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=2DA43D38-DB71-4C1B-BC6A-9B6652CD92A3&displaylang=en
   
  Registry warning:
  Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  How to back up and restore the registry in Windows: http://support.microsoft.com/kb/322756
   
  Method 2: If the problem persists, then try to install the latest graphics driver from the link below.
  http://support.Microsoft.com/default.aspx?scid=kb;en-us;179113
   
   
  Hope this information is useful.